Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos5410-odroidxu.dts
blob4f9297ae0763a74d3f99e9df909cdbe3325b6a3b
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Hardkernel Odroid XU board device tree source
4  *
5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6  *              http://www.samsung.com
7  * Copyright (c) 2016 Krzysztof Kozlowski
8  */
10 /dts-v1/;
11 #include "exynos5410.dtsi"
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/sound/samsung-i2s.h>
16 #include "exynos54xx-odroidxu-leds.dtsi"
18 / {
19         model = "Hardkernel Odroid XU";
20         compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
22         memory@40000000 {
23                 device_type = "memory";
24                 reg = <0x40000000 0x7ea00000>;
25         };
27         chosen {
28                 stdout-path = "serial2:115200n8";
29         };
31         emmc_pwrseq: pwrseq {
32                 pinctrl-0 = <&emmc_nrst_pin>;
33                 pinctrl-names = "default";
34                 compatible = "mmc-pwrseq-emmc";
35                 reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
36         };
38         fan0: pwm-fan {
39                 compatible = "pwm-fan";
40                 pwms = <&pwm 0 20972 0>;
41                 #cooling-cells = <2>;
42                 cooling-levels = <0 130 170 230>;
43         };
45         fin_pll: xxti {
46                 compatible = "fixed-clock";
47                 clock-frequency = <24000000>;
48                 clock-output-names = "fin_pll";
49                 #clock-cells = <0>;
50         };
52         firmware@2073000 {
53                 compatible = "samsung,secure-firmware";
54                 reg = <0x02073000 0x1000>;
55         };
57         sound: sound {
58                 compatible = "simple-audio-card";
60                 simple-audio-card,name = "Odroid-XU";
61                 simple-audio-card,widgets =
62                         "Headphone", "Headphone Jack",
63                         "Speakers", "Speakers";
64                 simple-audio-card,routing =
65                         "Headphone Jack", "HPL",
66                         "Headphone Jack", "HPR",
67                         "Headphone Jack", "MICBIAS",
68                         "IN1", "Headphone Jack",
69                         "Speakers", "SPKL",
70                         "Speakers", "SPKR";
72                 simple-audio-card,format = "i2s";
73                 simple-audio-card,bitclock-master = <&link0_codec>;
74                 simple-audio-card,frame-master = <&link0_codec>;
76                 simple-audio-card,cpu {
77                         sound-dai = <&audi2s0 0>;
78                         system-clock-frequency = <19200000>;
79                 };
81                 link0_codec: simple-audio-card,codec {
82                         sound-dai = <&max98090>;
83                         clocks = <&audi2s0 CLK_I2S_CDCLK>;
84                 };
85         };
88 &adc {
89         vdd-supply = <&ldo10_reg>;
90         status = "okay";
93 &audi2s0 {
94         status = "okay";
97 &clock {
98         clocks = <&fin_pll>;
99         assigned-clocks = <&clock CLK_FOUT_EPLL>;
100         assigned-clock-rates = <192000000>;
103 &clock_audss {
104         assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
105                         <&clock_audss EXYNOS_MOUT_I2S>,
106                         <&clock_audss EXYNOS_DOUT_SRP>,
107                         <&clock_audss EXYNOS_DOUT_AUD_BUS>;
109         assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
110                         <&clock_audss EXYNOS_MOUT_AUDSS>;
112         assigned-clock-rates =  <0>,
113                                 <0>,
114                                 <96000000>,
115                                 <19200000>;
118 &cpu0_thermal {
119         thermal-sensors = <&tmu_cpu0 0>;
120         polling-delay-passive = <0>;
121         polling-delay = <0>;
123         trips {
124                 cpu_alert0: cpu-alert-0 {
125                         temperature = <50000>; /* millicelsius */
126                         hysteresis = <5000>; /* millicelsius */
127                         type = "active";
128                 };
129                 cpu_alert1: cpu-alert-1 {
130                         temperature = <60000>; /* millicelsius */
131                         hysteresis = <5000>; /* millicelsius */
132                         type = "active";
133                 };
134                 cpu_alert2: cpu-alert-2 {
135                         temperature = <70000>; /* millicelsius */
136                         hysteresis = <5000>; /* millicelsius */
137                         type = "active";
138                 };
139                 cpu_crit0: cpu-crit-0 {
140                         temperature = <120000>; /* millicelsius */
141                         hysteresis = <0>; /* millicelsius */
142                         type = "critical";
143                 };
144         };
146         cooling-maps {
147                 map0 {
148                         trip = <&cpu_alert0>;
149                         cooling-device = <&fan0 0 1>;
150                 };
151                 map1 {
152                         trip = <&cpu_alert1>;
153                         cooling-device = <&fan0 1 2>;
154                 };
155                 map2 {
156                         trip = <&cpu_alert2>;
157                         cooling-device = <&fan0 2 3>;
158                 };
159         };
162 &hsi2c_4 {
163         samsung,i2c-sda-delay = <100>;
164         samsung,i2c-max-bus-freq = <400000>;
165         status = "okay";
167         usb3503: usb-hub@8 {
168                 compatible = "smsc,usb3503";
169                 reg = <0x08>;
171                 intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
172                 connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
173                 reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
174                 initial-mode = <1>;
176                 clock-names = "refclk";
177                 clocks = <&pmu_system_controller 0>;
178                 refclk-frequency = <24000000>;
179         };
181         max77802: pmic@9 {
182                 compatible = "maxim,max77802";
183                 reg = <0x9>;
184                 interrupt-parent = <&gpx0>;
185                 interrupts = <4 IRQ_TYPE_NONE>;
186                 pinctrl-names = "default";
187                 pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
188                             <&pmic_dvs_3>;
189                 #clock-cells = <1>;
191                 inl1-supply = <&buck5_reg>;
192                 inl2-supply = <&buck7_reg>;
193                 inl3-supply = <&buck9_reg>;
194                 inl4-supply = <&buck9_reg>;
195                 inl5-supply = <&buck9_reg>;
196                 inl6-supply = <&buck10_reg>;
197                 inl7-supply = <&buck9_reg>;
198                 /* inl9 supply is BOOST, not configured here */
199                 inl10-supply = <&buck7_reg>;
201                 regulators {
202                         buck1_reg: BUCK1 {
203                                 regulator-name = "vdd_mif";
204                                 regulator-min-microvolt = <800000>;
205                                 regulator-max-microvolt = <1300000>;
206                                 regulator-always-on;
207                                 regulator-boot-on;
208                         };
210                         buck2_reg: BUCK2 {
211                                 regulator-name = "vdd_arm";
212                                 regulator-min-microvolt = <800000>;
213                                 regulator-max-microvolt = <1500000>;
214                                 regulator-always-on;
215                                 regulator-boot-on;
216                         };
218                         buck3_reg: BUCK3 {
219                                 regulator-name = "vdd_int";
220                                 regulator-min-microvolt = <800000>;
221                                 regulator-max-microvolt = <1400000>;
222                                 regulator-always-on;
223                                 regulator-boot-on;
224                         };
226                         buck4_reg: BUCK4 {
227                                 regulator-name = "vdd_g3d";
228                                 regulator-min-microvolt = <800000>;
229                                 regulator-max-microvolt = <1400000>;
230                                 regulator-always-on;
231                                 regulator-boot-on;
232                         };
234                         buck5_reg: BUCK5 {
235                                 regulator-name = "vdd_mem";
236                                 regulator-min-microvolt = <800000>;
237                                 regulator-max-microvolt = <1500000>;
238                                 regulator-always-on;
239                                 regulator-boot-on;
240                         };
242                         buck6_reg: BUCK6 {
243                                 regulator-name = "vdd_kfc";
244                                 regulator-min-microvolt = <800000>;
245                                 regulator-max-microvolt = <1500000>;
246                                 regulator-always-on;
247                                 regulator-boot-on;
248                         };
250                         buck7_reg: BUCK7 {
251                                 regulator-name = "buck7";
252                                 regulator-min-microvolt = <1300000>;
253                                 regulator-max-microvolt = <1300000>;
254                                 regulator-always-on;
255                                 regulator-boot-on;
256                         };
258                         buck8_reg: BUCK8 {
259                                 /* vdd_mmc0 */
260                                 regulator-name = "vddf_2v85";
261                                 regulator-min-microvolt = <2850000>;
262                                 regulator-max-microvolt = <2850000>;
263                                 regulator-always-on;
264                                 regulator-boot-on;
265                         };
267                         buck9_reg: BUCK9 {
268                                 regulator-name = "buck9";
269                                 regulator-min-microvolt = <3000000>;
270                                 regulator-max-microvolt = <3000000>;
271                                 regulator-always-on;
272                                 regulator-boot-on;
273                         };
275                         buck10_reg: BUCK10 {
276                                 regulator-name = "buck10";
277                                 regulator-min-microvolt = <2950000>;
278                                 regulator-max-microvolt = <2950000>;
279                                 regulator-always-on;
280                                 regulator-boot-on;
281                         };
283                         ldo1_reg: LDO1 {
284                                 regulator-name = "vdd_alive";
285                                 regulator-min-microvolt = <1000000>;
286                                 regulator-max-microvolt = <1000000>;
287                                 regulator-always-on;
288                         };
290                         ldo2_reg: LDO2 {
291                                 regulator-name = "vddq_m1_m2";
292                                 regulator-min-microvolt = <1200000>;
293                                 regulator-max-microvolt = <1200000>;
294                                 regulator-always-on;
295                         };
297                         ldo3_reg: LDO3 {
298                                 regulator-name = "vddq_gpio";
299                                 regulator-min-microvolt = <1800000>;
300                                 regulator-max-microvolt = <1800000>;
301                                 regulator-always-on;
302                         };
304                         ldo4_reg: LDO4 {
305                                 regulator-name = "vddq_mmc2";
306                                 regulator-min-microvolt = <1800000>;
307                                 regulator-max-microvolt = <3000000>;
308                                 /* Having it off prevents reboot */
309                                 regulator-always-on;
310                         };
312                         ldo5_reg: LDO5 {
313                                 regulator-name = "vdd18_hsic";
314                                 regulator-min-microvolt = <1800000>;
315                                 regulator-max-microvolt = <1800000>;
316                                 regulator-always-on;
317                         };
319                         ldo6_reg: LDO6 {
320                                 regulator-name = "vdd18_bpll";
321                                 regulator-min-microvolt = <1800000>;
322                                 regulator-max-microvolt = <1800000>;
323                                 regulator-always-on;
324                         };
326                         ldo7_reg: LDO7 {
327                                 regulator-name = "vddq_lcd";
328                                 regulator-min-microvolt = <1800000>;
329                                 regulator-max-microvolt = <1800000>;
330                         };
332                         ldo8_reg: LDO8 {
333                                 regulator-name = "vdd10_hdmi";
334                                 regulator-min-microvolt = <1000000>;
335                                 regulator-max-microvolt = <1000000>;
336                                 regulator-always-on;
337                         };
339                         ldo9_reg: LDO9 {
340                                 regulator-name = "ldo9";
341                         };
343                         ldo10_reg: LDO10 {
344                                 regulator-name = "vdd18_mipi";
345                                 regulator-min-microvolt = <1800000>;
346                                 regulator-max-microvolt = <1800000>;
347                                 regulator-always-on;
348                         };
350                         ldo11_reg: LDO11 {
351                                 regulator-name = "vddq_mmc01";
352                                 regulator-min-microvolt = <1800000>;
353                                 regulator-max-microvolt = <1800000>;
354                                 /*
355                                  * Having it off prevents accessing MMC after
356                                  * reboot with error:
357                                  * MMC Device 1: Clock OFF has been failed.
358                                  */
359                                 regulator-always-on;
360                         };
362                         ldo12_reg: LDO12 {
363                                 regulator-name = "vdd33_usb3";
364                                 regulator-min-microvolt = <3300000>;
365                                 regulator-max-microvolt = <3300000>;
366                                 regulator-always-on;
367                         };
369                         ldo13_reg: LDO13 {
370                                 regulator-name = "vddq_abbg0";
371                                 regulator-min-microvolt = <1800000>;
372                                 regulator-max-microvolt = <1800000>;
373                                 regulator-always-on;
374                         };
376                         ldo14_reg: LDO14 {
377                                 regulator-name = "vddq_abbg1";
378                                 regulator-min-microvolt = <1800000>;
379                                 regulator-max-microvolt = <1800000>;
380                                 regulator-always-on;
381                         };
383                         ldo15_reg: LDO15 {
384                                 regulator-name = "vdd10_usb3";
385                                 regulator-min-microvolt = <1000000>;
386                                 regulator-max-microvolt = <1000000>;
387                                 regulator-always-on;
388                         };
390                         ldo16_reg: LDO16 {
391                                 regulator-name = "ldo16";
392                         };
394                         ldo17_reg: LDO17 {
395                                 regulator-name = "cam_sensor_core";
396                                 regulator-min-microvolt = <1200000>;
397                                 regulator-max-microvolt = <1200000>;
398                         };
400                         ldo18_reg: LDO18 {
401                                 regulator-name = "ldo18";
402                                 regulator-min-microvolt = <1800000>;
403                                 regulator-max-microvolt = <1800000>;
404                         };
406                         ldo19_reg: LDO19 {
407                                 regulator-name = "ldo19";
408                         };
410                         ldo20_reg: LDO20 {
411                                 regulator-name = "vdd_mmc0";
412                                 regulator-min-microvolt = <1800000>;
413                                 regulator-max-microvolt = <1800000>;
414                         };
416                         ldo21_reg: LDO21 {
417                                 /* vdd_mmc2 */
418                                 regulator-name = "vddf_2v8";
419                                 regulator-min-microvolt = <2850000>;
420                                 regulator-max-microvolt = <2850000>;
421                         };
423                         ldo22_reg: LDO22 {
424                                 regulator-name = "ldo22";
425                         };
427                         ldo23_reg: LDO23 {
428                                 regulator-name = "dp_p3v3";
429                                 regulator-min-microvolt = <3300000>;
430                                 regulator-max-microvolt = <3300000>;
431                                 regulator-always-on;
432                         };
434                         ldo24_reg: LDO24 {
435                                 regulator-name = "cam_af";
436                                 regulator-min-microvolt = <2800000>;
437                                 regulator-max-microvolt = <2800000>;
438                         };
440                         ldo25_reg: LDO25 {
441                                 regulator-name = "eth_p3v3";
442                                 regulator-min-microvolt = <3300000>;
443                                 regulator-max-microvolt = <3300000>;
444                                 regulator-always-on;
445                         };
447                         ldo26_reg: LDO26 {
448                                 regulator-name = "usb30_extclk";
449                                 regulator-min-microvolt = <3300000>;
450                                 regulator-max-microvolt = <3300000>;
451                                 regulator-always-on;
452                         };
454                         ldo27_reg: LDO27 {
455                                 regulator-name = "ldo27";
456                         };
458                         ldo28_reg: LDO28 {
459                                 regulator-name = "ldo28";
460                         };
462                         ldo29_reg: LDO29 {
463                                 regulator-name = "ldo29";
464                         };
466                         ldo30_reg: LDO30 {
467                                 regulator-name = "vddq_e1_e2";
468                                 regulator-min-microvolt = <1200000>;
469                                 regulator-max-microvolt = <1200000>;
470                                 regulator-always-on;
471                         };
473                         ldo31_reg: LDO31 {
474                                 regulator-name = "ldo31";
475                         };
477                         /* On revisions with ti,ina231 this is sensor VS */
478                         ldo32_reg: LDO32 {
479                                 regulator-name = "vs_power_meter";
480                                 regulator-min-microvolt = <3300000>;
481                                 regulator-max-microvolt = <3300000>;
482                         };
484                         ldo33_reg: LDO33 {
485                                 regulator-name = "ldo33";
486                         };
488                         ldo34_reg: LDO34 {
489                                 regulator-name = "ldo34";
490                         };
492                         ldo35_reg: LDO35 {
493                                 regulator-name = "ldo35";
494                         };
495                 };
496         };
499 &i2c_1 {
500         status = "okay";
501         max98090: max98090@10 {
502                 compatible = "maxim,max98090";
503                 reg = <0x10>;
504                 interrupt-parent = <&gpj3>;
505                 interrupts = <0 IRQ_TYPE_NONE>;
506                 clocks = <&audi2s0 CLK_I2S_CDCLK>;
507                 clock-names = "mclk";
508                 #sound-dai-cells = <0>;
509         };
512 &mmc_0 {
513         status = "okay";
514         mmc-pwrseq = <&emmc_pwrseq>;
515         cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
516         card-detect-delay = <200>;
517         samsung,dw-mshc-ciu-div = <3>;
518         samsung,dw-mshc-sdr-timing = <0 4>;
519         samsung,dw-mshc-ddr-timing = <0 2>;
520         pinctrl-names = "default";
521         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
522         bus-width = <8>;
523         cap-mmc-highspeed;
524         mmc-hs200-1_8v;
525         vmmc-supply = <&ldo20_reg>;
526         vqmmc-supply = <&ldo11_reg>;
529 &mmc_2 {
530         status = "okay";
531         card-detect-delay = <200>;
532         samsung,dw-mshc-ciu-div = <3>;
533         samsung,dw-mshc-sdr-timing = <0 4>;
534         samsung,dw-mshc-ddr-timing = <0 2>;
535         pinctrl-names = "default";
536         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
537         bus-width = <4>;
538         cap-sd-highspeed;
539         vmmc-supply = <&ldo21_reg>;
540         vqmmc-supply = <&ldo4_reg>;
543 &pinctrl_0 {
544         emmc_nrst_pin: emmc-nrst {
545                 samsung,pins = "gpd1-0";
546                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
547                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
548                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
549         };
551         sd2_wp: sd2-wp {
552                 samsung,pins = "gpm5-0";
553                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
554                 /* Pin is floating so be sure to disable write-protect */
555                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
556                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
557         };
559         pmic_dvs_3: pmic-dvs-3 {
560                 samsung,pins = "gpx0-0";
561                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
562                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
563                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
564         };
566         pmic_dvs_2: pmic-dvs-2 {
567                 samsung,pins = "gpx0-1";
568                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
569                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
570                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
571         };
573         pmic_dvs_1: pmic-dvs-1 {
574                 samsung,pins = "gpx0-2";
575                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
576                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
577                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
578                 samsung,pin-val = <1>;
579         };
581         max77802_irq: max77802-irq {
582                 samsung,pins = "gpx0-4";
583                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
584                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
585                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
586         };
589 &pwm {
590         /*
591          * PWM 0 -- fan
592          * PWM 1 -- Green LED
593          * PWM 2 -- Blue LED
594          * PWM 3 -- on MIPI connector for backlight
595          */
596         pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
597         pinctrl-names = "default";
598         status = "okay";
601 &rtc {
602         status = "okay";
603         clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
604         clock-names = "rtc", "rtc_src";
607 &serial_0 {
608         status = "okay";
611 &serial_1 {
612         status = "okay";
615 &serial_2 {
616         status = "okay";
619 &serial_3 {
620         status = "okay";
623 &tmu_cpu0 {
624         vtmu-supply = <&ldo10_reg>;
627 &tmu_cpu1 {
628         vtmu-supply = <&ldo10_reg>;
631 &tmu_cpu2 {
632         vtmu-supply = <&ldo10_reg>;
635 &tmu_cpu3 {
636         vtmu-supply = <&ldo10_reg>;
639 &usbdrd_dwc3_0 {
640         dr_mode = "host";
643 &usbdrd_dwc3_1 {
644         dr_mode = "peripheral";
647 &usbdrd3_0 {
648         vdd33-supply = <&ldo12_reg>;
649         vdd10-supply = <&ldo15_reg>;
652 &usbdrd3_1 {
653         vdd33-supply = <&ldo12_reg>;
654         vdd10-supply = <&ldo15_reg>;