arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR X11
   2 /*
   3  * Copyright 2015 Boundary Devices, Inc.
   4  */
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         chosen {
  10                 stdout-path = &uart2;
  11         };
  12
  13         memory@10000000 {
  14                 device_type = "memory";
  15                 reg = <0x10000000 0xF0000000>;
  16         };
  17
  18         regulators {
  19                 compatible = "simple-bus";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 reg_1p8v: regulator@0 {
  24                         compatible = "regulator-fixed";
  25                         reg = <0>;
  26                         regulator-name = "1P8V";
  27                         regulator-min-microvolt = <1800000>;
  28                         regulator-max-microvolt = <1800000>;
  29                         regulator-always-on;
  30                 };
  31
  32                 reg_2p5v: regulator@1 {
  33                         compatible = "regulator-fixed";
  34                         reg = <1>;
  35                         regulator-name = "2P5V";
  36                         regulator-min-microvolt = <2500000>;
  37                         regulator-max-microvolt = <2500000>;
  38                         regulator-always-on;
  39                 };
  40
  41                 reg_3p3v: regulator@2 {
  42                         compatible = "regulator-fixed";
  43                         reg = <2>;
  44                         regulator-name = "3P3V";
  45                         regulator-min-microvolt = <3300000>;
  46                         regulator-max-microvolt = <3300000>;
  47                         regulator-always-on;
  48                 };
  49
  50                 reg_usb_otg_vbus: regulator@3 {
  51                         compatible = "regulator-fixed";
  52                         reg = <3>;
  53                         regulator-name = "usb_otg_vbus";
  54                         regulator-min-microvolt = <5000000>;
  55                         regulator-max-microvolt = <5000000>;
  56                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  57                         enable-active-high;
  58                 };
  59
  60                 reg_usb_h1_vbus: regulator@4 {
  61                         compatible = "regulator-fixed";
  62                         reg = <4>;
  63                         pinctrl-names = "default";
  64                         pinctrl-0 = <&pinctrl_usbh1>;
  65                         regulator-name = "usb_h1_vbus";
  66                         regulator-min-microvolt = <3300000>;
  67                         regulator-max-microvolt = <3300000>;
  68                         gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
  69                         enable-active-high;
  70                 };
  71
  72                 reg_wlan_vmmc: regulator@5 {
  73                         compatible = "regulator-fixed";
  74                         reg = <5>;
  75                         pinctrl-names = "default";
  76                         pinctrl-0 = <&pinctrl_wlan_vmmc>;
  77                         regulator-name = "reg_wlan_vmmc";
  78                         regulator-min-microvolt = <3300000>;
  79                         regulator-max-microvolt = <3300000>;
  80                         gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
  81                         startup-delay-us = <70000>;
  82                         enable-active-high;
  83                 };
  84
  85                 reg_can_xcvr: regulator@6 {
  86                         compatible = "regulator-fixed";
  87                         reg = <6>;
  88                         regulator-name = "CAN XCVR";
  89                         regulator-min-microvolt = <3300000>;
  90                         regulator-max-microvolt = <3300000>;
  91                         pinctrl-names = "default";
  92                         pinctrl-0 = <&pinctrl_can_xcvr>;
  93                         gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
  94                 };
  95         };
  96
  97         gpio-keys {
  98                 compatible = "gpio-keys";
  99                 pinctrl-names = "default";
 100                 pinctrl-0 = <&pinctrl_gpio_keys>;
 101
 102                 power {
 103                         label = "Power Button";
 104                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 105                         linux,code = <KEY_POWER>;
 106                         wakeup-source;
 107                 };
 108
 109                 menu {
 110                         label = "Menu";
 111                         gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 112                         linux,code = <KEY_MENU>;
 113                 };
 114
 115                 home {
 116                         label = "Home";
 117                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 118                         linux,code = <KEY_HOME>;
 119                 };
 120
 121                 back {
 122                         label = "Back";
 123                         gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_BACK>;
 125                 };
 126
 127                 volume-up {
 128                         label = "Volume Up";
 129                         gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 130                         linux,code = <KEY_VOLUMEUP>;
 131                 };
 132
 133                 volume-down {
 134                         label = "Volume Down";
 135                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 136                         linux,code = <KEY_VOLUMEDOWN>;
 137                 };
 138         };
 139
 140         i2c2mux {
 141                 compatible = "i2c-mux-gpio";
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&pinctrl_i2c2mux>;
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146                 mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
 147                              &gpio4 15 GPIO_ACTIVE_HIGH>;
 148                 i2c-parent = <&i2c2>;
 149                 idle-state = <0>;
 150
 151                 i2c2mux@1 {
 152                         reg = <1>;
 153                         #address-cells = <1>;
 154                         #size-cells = <0>;
 155                 };
 156
 157                 i2c2mux@2 {
 158                         reg = <2>;
 159                         #address-cells = <1>;
 160                         #size-cells = <0>;
 161                 };
 162         };
 163
 164         i2c3mux {
 165                 compatible = "i2c-mux-gpio";
 166                 pinctrl-names = "default";
 167                 pinctrl-0 = <&pinctrl_i2c3mux>;
 168                 #address-cells = <1>;
 169                 #size-cells = <0>;
 170                 mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 171                 i2c-parent = <&i2c3>;
 172                 idle-state = <0>;
 173
 174                 i2c3mux@1 {
 175                         reg = <1>;
 176                         #address-cells = <1>;
 177                         #size-cells = <0>;
 178                 };
 179         };
 180
 181         leds {
 182                 compatible = "gpio-leds";
 183
 184                 speaker-enable {
 185                         gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 186                         retain-state-suspended;
 187                         default-state = "off";
 188                 };
 189
 190                 ttymxc4-rs232 {
 191                         gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
 192                         retain-state-suspended;
 193                         default-state = "on";
 194                 };
 195         };
 196
 197         backlight_lcd: backlight-lcd {
 198                 compatible = "pwm-backlight";
 199                 pwms = <&pwm1 0 5000000>;
 200                 brightness-levels = <0 4 8 16 32 64 128 255>;
 201                 default-brightness-level = <7>;
 202                 power-supply = <&reg_3p3v>;
 203                 status = "okay";
 204         };
 205
 206         backlight_lvds0: backlight-lvds0 {
 207                 compatible = "pwm-backlight";
 208                 pwms = <&pwm4 0 5000000>;
 209                 brightness-levels = <0 4 8 16 32 64 128 255>;
 210                 default-brightness-level = <7>;
 211                 power-supply = <&reg_3p3v>;
 212                 status = "okay";
 213         };
 214
 215         backlight_lvds1: backlight-lvds1 {
 216                 compatible = "pwm-backlight";
 217                 pwms = <&pwm2 0 5000000>;
 218                 brightness-levels = <0 4 8 16 32 64 128 255>;
 219                 default-brightness-level = <7>;
 220                 power-supply = <&reg_3p3v>;
 221                 status = "okay";
 222         };
 223
 224         lcd_display: disp0 {
 225                 compatible = "fsl,imx-parallel-display";
 226                 #address-cells = <1>;
 227                 #size-cells = <0>;
 228                 interface-pix-fmt = "bgr666";
 229                 pinctrl-names = "default";
 230                 pinctrl-0 = <&pinctrl_j15>;
 231                 status = "okay";
 232
 233                 port@0 {
 234                         reg = <0>;
 235
 236                         lcd_display_in: endpoint {
 237                                 remote-endpoint = <&ipu1_di0_disp0>;
 238                         };
 239                 };
 240
 241                 port@1 {
 242                         reg = <1>;
 243
 244                         lcd_display_out: endpoint {
 245                                 remote-endpoint = <&lcd_panel_in>;
 246                         };
 247                 };
 248         };
 249
 250         panel-lcd {
 251                 compatible = "okaya,rs800480t-7x0gp";
 252                 backlight = <&backlight_lcd>;
 253
 254                 port {
 255                         lcd_panel_in: endpoint {
 256                                 remote-endpoint = <&lcd_display_out>;
 257                         };
 258                 };
 259         };
 260
 261         panel-lvds0 {
 262                 compatible = "hannstar,hsd100pxn1";
 263                 backlight = <&backlight_lvds0>;
 264
 265                 port {
 266                         panel_in_lvds0: endpoint {
 267                                 remote-endpoint = <&lvds0_out>;
 268                         };
 269                 };
 270         };
 271
 272         panel-lvds1 {
 273                 compatible = "hannstar,hsd100pxn1";
 274                 backlight = <&backlight_lvds1>;
 275
 276                 port {
 277                         panel_in_lvds1: endpoint {
 278                                 remote-endpoint = <&lvds1_out>;
 279                         };
 280                 };
 281         };
 282
 283         sound {
 284                 compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 285                              "fsl,imx-audio-sgtl5000";
 286                 model = "imx6q-nitrogen6_max-sgtl5000";
 287                 ssi-controller = <&ssi1>;
 288                 audio-codec = <&codec>;
 289                 audio-routing =
 290                         "MIC_IN", "Mic Jack",
 291                         "Mic Jack", "Mic Bias",
 292                         "Headphone Jack", "HP_OUT";
 293                 mux-int-port = <1>;
 294                 mux-ext-port = <3>;
 295         };
 296 };
 297
 298 &audmux {
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&pinctrl_audmux>;
 301         status = "okay";
 302 };
 303
 304 &can1 {
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&pinctrl_can1>;
 307         xceiver-supply = <&reg_can_xcvr>;
 308         status = "okay";
 309 };
 310
 311 &clks {
 312         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 313                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 314         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 315                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 316 };
 317
 318 &ecspi1 {
 319         cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 320         pinctrl-names = "default";
 321         pinctrl-0 = <&pinctrl_ecspi1>;
 322         status = "okay";
 323
 324         flash: m25p80@0 {
 325                 compatible = "microchip,sst25vf016b";
 326                 spi-max-frequency = <20000000>;
 327                 reg = <0>;
 328         };
 329 };
 330
 331 &fec {
 332         pinctrl-names = "default";
 333         pinctrl-0 = <&pinctrl_enet>;
 334         phy-mode = "rgmii";
 335         phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 336         txen-skew-ps = <0>;
 337         txc-skew-ps = <3000>;
 338         rxdv-skew-ps = <0>;
 339         rxc-skew-ps = <3000>;
 340         rxd0-skew-ps = <0>;
 341         rxd1-skew-ps = <0>;
 342         rxd2-skew-ps = <0>;
 343         rxd3-skew-ps = <0>;
 344         txd0-skew-ps = <0>;
 345         txd1-skew-ps = <0>;
 346         txd2-skew-ps = <0>;
 347         txd3-skew-ps = <0>;
 348         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 349                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 350         fsl,err006687-workaround-present;
 351         status = "okay";
 352 };
 353
 354 &hdmi {
 355         ddc-i2c-bus = <&i2c2>;
 356         status = "okay";
 357 };
 358
 359 &i2c1 {
 360         clock-frequency = <100000>;
 361         pinctrl-names = "default";
 362         pinctrl-0 = <&pinctrl_i2c1>;
 363         status = "okay";
 364
 365         codec: sgtl5000@a {
 366                 compatible = "fsl,sgtl5000";
 367                 pinctrl-names = "default";
 368                 pinctrl-0 = <&pinctrl_sgtl5000>;
 369                 reg = <0x0a>;
 370                 clocks = <&clks IMX6QDL_CLK_CKO>;
 371                 VDDA-supply = <&reg_2p5v>;
 372                 VDDIO-supply = <&reg_3p3v>;
 373         };
 374
 375         rtc: rtc@68 {
 376                 compatible = "microcrystal,rv4162";
 377                 pinctrl-names = "default";
 378                 pinctrl-0 = <&pinctrl_rv4162>;
 379                 reg = <0x68>;
 380                 interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
 381         };
 382 };
 383
 384 &i2c2 {
 385         clock-frequency = <100000>;
 386         pinctrl-names = "default";
 387         pinctrl-0 = <&pinctrl_i2c2>;
 388         status = "okay";
 389 };
 390
 391 &i2c3 {
 392         clock-frequency = <100000>;
 393         pinctrl-names = "default";
 394         pinctrl-0 = <&pinctrl_i2c3>;
 395         status = "okay";
 396
 397         touchscreen@4 {
 398                 compatible = "eeti,egalax_ts";
 399                 reg = <0x04>;
 400                 interrupt-parent = <&gpio1>;
 401                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 402                 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 403         };
 404
 405         touchscreen@38 {
 406                 compatible = "edt,edt-ft5x06";
 407                 reg = <0x38>;
 408                 interrupt-parent = <&gpio1>;
 409                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 410                 wakeup-source;
 411         };
 412 };
 413
 414 &iomuxc {
 415         imx6q-nitrogen6-max {
 416                 pinctrl_audmux: audmuxgrp {
 417                         fsl,pins = <
 418                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 419                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 420                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 421                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 422                         >;
 423                 };
 424
 425                 pinctrl_can1: can1grp {
 426                         fsl,pins = <
 427                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
 428                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 429                         >;
 430                 };
 431
 432                 pinctrl_can_xcvr: can-xcvrgrp {
 433                         fsl,pins = <
 434                                 /* Flexcan XCVR enable */
 435                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x1b0b0
 436                         >;
 437                 };
 438
 439                 pinctrl_ecspi1: ecspi1grp {
 440                         fsl,pins = <
 441                                 MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 442                                 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 443                                 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 444                                 MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
 445                         >;
 446                 };
 447
 448                 pinctrl_enet: enetgrp {
 449                         fsl,pins = <
 450                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x100b0
 451                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x100b0
 452                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
 453                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
 454                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
 455                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
 456                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
 457                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
 458                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x100b0
 459                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 460                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 461                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 462                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 463                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 464                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 465                                 /* Phy reset */
 466                                 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x0f0b0
 467                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0
 468                                 MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
 469                         >;
 470                 };
 471
 472                 pinctrl_gpio_keys: gpio-keysgrp {
 473                         fsl,pins = <
 474                                 /* Power Button */
 475                                 MX6QDL_PAD_NANDF_D3__GPIO2_IO03         0x1b0b0
 476                                 /* Menu Button */
 477                                 MX6QDL_PAD_NANDF_D1__GPIO2_IO01         0x1b0b0
 478                                 /* Home Button */
 479                                 MX6QDL_PAD_NANDF_D4__GPIO2_IO04         0x1b0b0
 480                                 /* Back Button */
 481                                 MX6QDL_PAD_NANDF_D2__GPIO2_IO02         0x1b0b0
 482                                 /* Volume Up Button */
 483                                 MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x1b0b0
 484                                 /* Volume Down Button */
 485                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b0
 486                         >;
 487                 };
 488
 489                 pinctrl_i2c1: i2c1grp {
 490                         fsl,pins = <
 491                                 MX6QDL_PAD_EIM_D21__I2C1_SCL    0x4001b8b1
 492                                 MX6QDL_PAD_EIM_D28__I2C1_SDA    0x4001b8b1
 493                         >;
 494                 };
 495
 496                 pinctrl_i2c2: i2c2grp {
 497                         fsl,pins = <
 498                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
 499                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
 500                         >;
 501                 };
 502
 503                 pinctrl_i2c2mux: i2c2muxgrp {
 504                         fsl,pins = <
 505                                 /* ov5642 camera i2c enable */
 506                                 MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x000b0
 507                                 /* ov5640_mipi camera i2c enable */
 508                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
 509                         >;
 510                 };
 511
 512                 pinctrl_i2c3: i2c3grp {
 513                         fsl,pins = <
 514                                 MX6QDL_PAD_GPIO_5__I2C3_SCL     0x4001b8b1
 515                                 MX6QDL_PAD_GPIO_16__I2C3_SDA    0x4001b8b1
 516                                 MX6QDL_PAD_GPIO_9__GPIO1_IO09   0x1b0b0
 517                         >;
 518                 };
 519
 520                 pinctrl_i2c3mux: i2c3muxgrp {
 521                         fsl,pins = <
 522                                 /* PCIe I2C enable */
 523                                 MX6QDL_PAD_EIM_OE__GPIO2_IO25   0x000b0
 524                         >;
 525                 };
 526
 527                 pinctrl_j15: j15grp {
 528                         fsl,pins = <
 529                                 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 530                                 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 531                                 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 532                                 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 533                                 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
 534                                 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 535                                 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 536                                 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 537                                 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 538                                 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 539                                 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 540                                 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 541                                 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 542                                 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 543                                 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 544                                 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 545                                 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 546                                 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 547                                 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 548                                 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 549                                 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 550                                 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 551                                 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 552                                 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 553                                 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 554                                 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 555                                 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 556                                 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 557                         >;
 558                 };
 559
 560                 pinctrl_pcie: pciegrp {
 561                         fsl,pins = <
 562                                 /* PCIe reset */
 563                                 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0
 564                         >;
 565                 };
 566
 567                 pinctrl_pwm1: pwm1grp {
 568                         fsl,pins = <
 569                                 MX6QDL_PAD_SD1_DAT3__PWM1_OUT   0x1b0b1
 570                         >;
 571                 };
 572
 573                 pinctrl_pwm2: pwm2grp {
 574                         fsl,pins = <
 575                                 MX6QDL_PAD_SD1_DAT2__PWM2_OUT   0x1b0b1
 576                         >;
 577                 };
 578
 579                 pinctrl_pwm3: pwm3grp {
 580                         fsl,pins = <
 581                                 MX6QDL_PAD_SD1_DAT1__PWM3_OUT   0x1b0b1
 582                         >;
 583                 };
 584
 585                 pinctrl_pwm4: pwm4grp {
 586                         fsl,pins = <
 587                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT    0x1b0b1
 588                         >;
 589                 };
 590
 591                 pinctrl_rv4162: rv4162grp {
 592                         fsl,pins = <
 593                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
 594                         >;
 595                 };
 596
 597                 pinctrl_sgtl5000: sgtl5000grp {
 598                         fsl,pins = <
 599                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x000b0
 600                                 MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
 601                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0
 602                         >;
 603                 };
 604
 605                 pinctrl_uart1: uart1grp {
 606                         fsl,pins = <
 607                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 608                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 609                         >;
 610                 };
 611
 612                 pinctrl_uart2: uart2grp {
 613                         fsl,pins = <
 614                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 615                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 616                         >;
 617                 };
 618
 619                 pinctrl_uart5: uart5grp {
 620                         fsl,pins = <
 621                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x130b1
 622                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x030b1
 623                                 /* RS485 RX Enable: pull up */
 624                                 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10        0x1b0b1
 625                                 /* RS485 DEN: pull down */
 626                                 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07        0x030b1
 627                                 /* RS485/!RS232 Select: pull down (rs232) */
 628                                 MX6QDL_PAD_EIM_CS1__GPIO2_IO24          0x030b1
 629                                 /* ON: pull down */
 630                                 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08        0x030b1
 631                         >;
 632                 };
 633
 634                 pinctrl_usbh1: usbh1grp {
 635                         fsl,pins = <
 636                                 MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x0b0b0
 637                         >;
 638                 };
 639
 640                 pinctrl_usbotg: usbotggrp {
 641                         fsl,pins = <
 642                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 643                                 MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
 644                                 /* power enable, high active */
 645                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x000b0
 646                         >;
 647                 };
 648
 649                 pinctrl_usdhc2: usdhc2grp {
 650                         fsl,pins = <
 651                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 652                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 653                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 654                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 655                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 656                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 657                         >;
 658                 };
 659
 660                 pinctrl_usdhc3: usdhc3grp {
 661                         fsl,pins = <
 662                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 663                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 664                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 665                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 666                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 667                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 668                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x100b0
 669                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
 670                         >;
 671                 };
 672
 673                 pinctrl_usdhc4: usdhc4grp {
 674                         fsl,pins = <
 675                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 676                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 677                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 678                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 679                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 680                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 681                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 682                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 683                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 684                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 685                         >;
 686                 };
 687
 688                 pinctrl_wlan_vmmc: wlan-vmmcgrp {
 689                         fsl,pins = <
 690                                 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11        0x100b0
 691                                 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x000b0
 692                                 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x000b0
 693                                 MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT      0x000b0
 694                         >;
 695                 };
 696         };
 697 };
 698
 699 &ipu1_di0_disp0 {
 700         remote-endpoint = <&lcd_display_in>;
 701 };
 702
 703 &ldb {
 704         status = "okay";
 705
 706         lvds-channel@0 {
 707                 status = "okay";
 708
 709                 port@4 {
 710                         reg = <4>;
 711
 712                         lvds0_out: endpoint {
 713                                 remote-endpoint = <&panel_in_lvds0>;
 714                         };
 715                 };
 716         };
 717
 718         lvds-channel@1 {
 719                 status = "okay";
 720
 721                 port@4 {
 722                         reg = <4>;
 723
 724                         lvds1_out: endpoint {
 725                                 remote-endpoint = <&panel_in_lvds1>;
 726                         };
 727                 };
 728         };
 729 };
 730
 731 &pcie {
 732         pinctrl-names = "default";
 733         pinctrl-0 = <&pinctrl_pcie>;
 734         reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
 735         status = "okay";
 736 };
 737
 738 &pwm1 {
 739         pinctrl-names = "default";
 740         pinctrl-0 = <&pinctrl_pwm1>;
 741         status = "okay";
 742 };
 743
 744 &pwm2 {
 745         pinctrl-names = "default";
 746         pinctrl-0 = <&pinctrl_pwm2>;
 747         status = "okay";
 748 };
 749
 750 &pwm3 {
 751         pinctrl-names = "default";
 752         pinctrl-0 = <&pinctrl_pwm3>;
 753         status = "okay";
 754 };
 755
 756 &pwm4 {
 757         pinctrl-names = "default";
 758         pinctrl-0 = <&pinctrl_pwm4>;
 759         status = "okay";
 760 };
 761
 762 &ssi1 {
 763         status = "okay";
 764 };
 765
 766 &uart1 {
 767         pinctrl-names = "default";
 768         pinctrl-0 = <&pinctrl_uart1>;
 769         status = "okay";
 770 };
 771
 772 &uart2 {
 773         pinctrl-names = "default";
 774         pinctrl-0 = <&pinctrl_uart2>;
 775         status = "okay";
 776 };
 777
 778 &uart5 {
 779         pinctrl-names = "default";
 780         pinctrl-0 = <&pinctrl_uart5>;
 781         status = "okay";
 782 };
 783
 784 &usbh1 {
 785         vbus-supply = <&reg_usb_h1_vbus>;
 786         status = "okay";
 787 };
 788
 789 &usbotg {
 790         vbus-supply = <&reg_usb_otg_vbus>;
 791         pinctrl-names = "default";
 792         pinctrl-0 = <&pinctrl_usbotg>;
 793         disable-over-current;
 794         status = "okay";
 795 };
 796
 797 &usdhc2 {
 798         pinctrl-names = "default";
 799         pinctrl-0 = <&pinctrl_usdhc2>;
 800         bus-width = <4>;
 801         non-removable;
 802         vmmc-supply = <&reg_wlan_vmmc>;
 803         cap-power-off-card;
 804         keep-power-in-suspend;
 805         status = "okay";
 806
 807         #address-cells = <1>;
 808         #size-cells = <0>;
 809         wlcore: wlcore@2 {
 810                 compatible = "ti,wl1271";
 811                 reg = <2>;
 812                 interrupt-parent = <&gpio6>;
 813                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 814                 ref-clock-frequency = <38400000>;
 815         };
 816 };
 817
 818 &usdhc3 {
 819         pinctrl-names = "default";
 820         pinctrl-0 = <&pinctrl_usdhc3>;
 821         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 822         bus-width = <4>;
 823         vmmc-supply = <&reg_3p3v>;
 824         status = "okay";
 825 };
 826
 827 &usdhc4 {
 828         pinctrl-names = "default";
 829         pinctrl-0 = <&pinctrl_usdhc4>;
 830         bus-width = <8>;
 831         non-removable;
 832         vmmc-supply = <&reg_1p8v>;
 833         keep-power-in-suspend;
 834         status = "okay";
 835 };