arch/arm/boot/dts/imx6qdl-sabresd.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2012 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 #include <dt-bindings/clock/imx6qdl-clock.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9
  10 / {
  11         chosen {
  12                 stdout-path = &uart1;
  13         };
  14
  15         memory@10000000 {
  16                 device_type = "memory";
  17                 reg = <0x10000000 0x40000000>;
  18         };
  19
  20         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  21                 compatible = "regulator-fixed";
  22                 regulator-name = "usb_otg_vbus";
  23                 regulator-min-microvolt = <5000000>;
  24                 regulator-max-microvolt = <5000000>;
  25                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  26                 enable-active-high;
  27                 vin-supply = <&swbst_reg>;
  28         };
  29
  30         reg_usb_h1_vbus: regulator-usb-h1-vbus {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "usb_h1_vbus";
  33                 regulator-min-microvolt = <5000000>;
  34                 regulator-max-microvolt = <5000000>;
  35                 gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
  36                 enable-active-high;
  37                 vin-supply = <&swbst_reg>;
  38         };
  39
  40         reg_audio: regulator-audio {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "wm8962-supply";
  43                 gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
  44                 enable-active-high;
  45         };
  46
  47         reg_pcie: regulator-pcie {
  48                 compatible = "regulator-fixed";
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&pinctrl_pcie_reg>;
  51                 regulator-name = "MPCIE_3V3";
  52                 regulator-min-microvolt = <3300000>;
  53                 regulator-max-microvolt = <3300000>;
  54                 gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
  55                 enable-active-high;
  56         };
  57
  58         reg_sensors: regulator-sensors {
  59                 compatible = "regulator-fixed";
  60                 pinctrl-names = "default";
  61                 pinctrl-0 = <&pinctrl_sensors_reg>;
  62                 regulator-name = "sensors-supply";
  63                 regulator-min-microvolt = <3300000>;
  64                 regulator-max-microvolt = <3300000>;
  65                 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
  66                 enable-active-high;
  67         };
  68
  69         gpio-keys {
  70                 compatible = "gpio-keys";
  71                 pinctrl-names = "default";
  72                 pinctrl-0 = <&pinctrl_gpio_keys>;
  73
  74                 power {
  75                         label = "Power Button";
  76                         gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
  77                         wakeup-source;
  78                         linux,code = <KEY_POWER>;
  79                 };
  80
  81                 volume-up {
  82                         label = "Volume Up";
  83                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  84                         wakeup-source;
  85                         linux,code = <KEY_VOLUMEUP>;
  86                 };
  87
  88                 volume-down {
  89                         label = "Volume Down";
  90                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  91                         wakeup-source;
  92                         linux,code = <KEY_VOLUMEDOWN>;
  93                 };
  94         };
  95
  96         sound {
  97                 compatible = "fsl,imx6q-sabresd-wm8962",
  98                            "fsl,imx-audio-wm8962";
  99                 model = "wm8962-audio";
 100                 ssi-controller = <&ssi2>;
 101                 audio-codec = <&codec>;
 102                 audio-routing =
 103                         "Headphone Jack", "HPOUTL",
 104                         "Headphone Jack", "HPOUTR",
 105                         "Ext Spk", "SPKOUTL",
 106                         "Ext Spk", "SPKOUTR",
 107                         "AMIC", "MICBIAS",
 108                         "IN3R", "AMIC";
 109                 mux-int-port = <2>;
 110                 mux-ext-port = <3>;
 111         };
 112
 113         backlight_lvds: backlight-lvds {
 114                 compatible = "pwm-backlight";
 115                 pwms = <&pwm1 0 5000000>;
 116                 brightness-levels = <0 4 8 16 32 64 128 255>;
 117                 default-brightness-level = <7>;
 118                 status = "okay";
 119         };
 120
 121         leds {
 122                 compatible = "gpio-leds";
 123                 pinctrl-names = "default";
 124                 pinctrl-0 = <&pinctrl_gpio_leds>;
 125
 126                 red {
 127                         gpios = <&gpio1 2 0>;
 128                         default-state = "on";
 129                 };
 130         };
 131
 132         panel {
 133                 compatible = "hannstar,hsd100pxn1";
 134                 backlight = <&backlight_lvds>;
 135
 136                 port {
 137                         panel_in: endpoint {
 138                                 remote-endpoint = <&lvds0_out>;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &ipu1_csi0_from_ipu1_csi0_mux {
 145         bus-width = <8>;
 146         data-shift = <12>; /* Lines 19:12 used */
 147         hsync-active = <1>;
 148         vsync-active = <1>;
 149 };
 150
 151 &ipu1_csi0_mux_from_parallel_sensor {
 152         remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
 153 };
 154
 155 &ipu1_csi0 {
 156         pinctrl-names = "default";
 157         pinctrl-0 = <&pinctrl_ipu1_csi0>;
 158 };
 159
 160 &mipi_csi {
 161         status = "okay";
 162
 163         port@0 {
 164                 reg = <0>;
 165
 166                 mipi_csi2_in: endpoint {
 167                         remote-endpoint = <&ov5640_to_mipi_csi2>;
 168                         clock-lanes = <0>;
 169                         data-lanes = <1 2>;
 170                 };
 171         };
 172 };
 173
 174 &audmux {
 175         pinctrl-names = "default";
 176         pinctrl-0 = <&pinctrl_audmux>;
 177         status = "okay";
 178 };
 179
 180 &clks {
 181         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 182                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 183         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 184                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 185 };
 186
 187 &ecspi1 {
 188         cs-gpios = <&gpio4 9 0>;
 189         pinctrl-names = "default";
 190         pinctrl-0 = <&pinctrl_ecspi1>;
 191         status = "okay";
 192
 193         flash: m25p80@0 {
 194                 #address-cells = <1>;
 195                 #size-cells = <1>;
 196                 compatible = "st,m25p32", "jedec,spi-nor";
 197                 spi-max-frequency = <20000000>;
 198                 reg = <0>;
 199         };
 200 };
 201
 202 &fec {
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&pinctrl_enet>;
 205         phy-mode = "rgmii-id";
 206         phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 207         status = "okay";
 208 };
 209
 210 &hdmi {
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&pinctrl_hdmi_cec>;
 213         ddc-i2c-bus = <&i2c2>;
 214         status = "okay";
 215 };
 216
 217 &i2c1 {
 218         clock-frequency = <100000>;
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&pinctrl_i2c1>;
 221         status = "okay";
 222
 223         codec: wm8962@1a {
 224                 compatible = "wlf,wm8962";
 225                 reg = <0x1a>;
 226                 clocks = <&clks IMX6QDL_CLK_CKO>;
 227                 DCVDD-supply = <&reg_audio>;
 228                 DBVDD-supply = <&reg_audio>;
 229                 AVDD-supply = <&reg_audio>;
 230                 CPVDD-supply = <&reg_audio>;
 231                 MICVDD-supply = <&reg_audio>;
 232                 PLLVDD-supply = <&reg_audio>;
 233                 SPKVDD1-supply = <&reg_audio>;
 234                 SPKVDD2-supply = <&reg_audio>;
 235                 gpio-cfg = <
 236                         0x0000 /* 0:Default */
 237                         0x0000 /* 1:Default */
 238                         0x0013 /* 2:FN_DMICCLK */
 239                         0x0000 /* 3:Default */
 240                         0x8014 /* 4:FN_DMICCDAT */
 241                         0x0000 /* 5:Default */
 242                 >;
 243         };
 244
 245         accelerometer@1c {
 246                 compatible = "fsl,mma8451";
 247                 reg = <0x1c>;
 248                 pinctrl-names = "default";
 249                 pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
 250                 interrupt-parent = <&gpio1>;
 251                 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 252                 vdd-supply = <&reg_sensors>;
 253                 vddio-supply = <&reg_sensors>;
 254         };
 255
 256         ov5642: camera@3c {
 257                 compatible = "ovti,ov5642";
 258                 pinctrl-names = "default";
 259                 pinctrl-0 = <&pinctrl_ov5642>;
 260                 clocks = <&clks IMX6QDL_CLK_CKO>;
 261                 clock-names = "xclk";
 262                 reg = <0x3c>;
 263                 DOVDD-supply = <&vgen4_reg>; /* 1.8v */
 264                 AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
 265                                                 rev B board is VGEN5 */
 266                 DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
 267                 powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 268                 reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 269                 status = "disabled";
 270
 271                 port {
 272                         ov5642_to_ipu1_csi0_mux: endpoint {
 273                                 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
 274                                 bus-width = <8>;
 275                                 hsync-active = <1>;
 276                                 vsync-active = <1>;
 277                         };
 278                 };
 279         };
 280 };
 281
 282 &i2c2 {
 283         clock-frequency = <100000>;
 284         pinctrl-names = "default";
 285         pinctrl-0 = <&pinctrl_i2c2>;
 286         status = "okay";
 287
 288         touchscreen@4 {
 289                 compatible = "eeti,egalax_ts";
 290                 reg = <0x04>;
 291                 pinctrl-names = "default";
 292                 pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
 293                 interrupt-parent = <&gpio6>;
 294                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 295                 wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
 296         };
 297
 298         ov5640: camera@3c {
 299                 compatible = "ovti,ov5640";
 300                 pinctrl-names = "default";
 301                 pinctrl-0 = <&pinctrl_ov5640>;
 302                 reg = <0x3c>;
 303                 clocks = <&clks IMX6QDL_CLK_CKO>;
 304                 clock-names = "xclk";
 305                 DOVDD-supply = <&vgen4_reg>; /* 1.8v */
 306                 AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
 307                                                 rev B board is VGEN5 */
 308                 DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
 309                 powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 310                 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 311
 312                 port {
 313                         ov5640_to_mipi_csi2: endpoint {
 314                                 remote-endpoint = <&mipi_csi2_in>;
 315                                 clock-lanes = <0>;
 316                                 data-lanes = <1 2>;
 317                         };
 318                 };
 319         };
 320
 321         pmic: pfuze100@8 {
 322                 compatible = "fsl,pfuze100";
 323                 reg = <0x08>;
 324
 325                 regulators {
 326                         sw1a_reg: sw1ab {
 327                                 regulator-min-microvolt = <300000>;
 328                                 regulator-max-microvolt = <1875000>;
 329                                 regulator-boot-on;
 330                                 regulator-always-on;
 331                                 regulator-ramp-delay = <6250>;
 332                         };
 333
 334                         sw1c_reg: sw1c {
 335                                 regulator-min-microvolt = <300000>;
 336                                 regulator-max-microvolt = <1875000>;
 337                                 regulator-boot-on;
 338                                 regulator-always-on;
 339                                 regulator-ramp-delay = <6250>;
 340                         };
 341
 342                         sw2_reg: sw2 {
 343                                 regulator-min-microvolt = <800000>;
 344                                 regulator-max-microvolt = <3300000>;
 345                                 regulator-boot-on;
 346                                 regulator-always-on;
 347                                 regulator-ramp-delay = <6250>;
 348                         };
 349
 350                         sw3a_reg: sw3a {
 351                                 regulator-min-microvolt = <400000>;
 352                                 regulator-max-microvolt = <1975000>;
 353                                 regulator-boot-on;
 354                                 regulator-always-on;
 355                         };
 356
 357                         sw3b_reg: sw3b {
 358                                 regulator-min-microvolt = <400000>;
 359                                 regulator-max-microvolt = <1975000>;
 360                                 regulator-boot-on;
 361                                 regulator-always-on;
 362                         };
 363
 364                         sw4_reg: sw4 {
 365                                 regulator-min-microvolt = <800000>;
 366                                 regulator-max-microvolt = <3300000>;
 367                                 regulator-always-on;
 368                         };
 369
 370                         swbst_reg: swbst {
 371                                 regulator-min-microvolt = <5000000>;
 372                                 regulator-max-microvolt = <5150000>;
 373                         };
 374
 375                         snvs_reg: vsnvs {
 376                                 regulator-min-microvolt = <1000000>;
 377                                 regulator-max-microvolt = <3000000>;
 378                                 regulator-boot-on;
 379                                 regulator-always-on;
 380                         };
 381
 382                         vref_reg: vrefddr {
 383                                 regulator-boot-on;
 384                                 regulator-always-on;
 385                         };
 386
 387                         vgen1_reg: vgen1 {
 388                                 regulator-min-microvolt = <800000>;
 389                                 regulator-max-microvolt = <1550000>;
 390                         };
 391
 392                         vgen2_reg: vgen2 {
 393                                 regulator-min-microvolt = <800000>;
 394                                 regulator-max-microvolt = <1550000>;
 395                         };
 396
 397                         vgen3_reg: vgen3 {
 398                                 regulator-min-microvolt = <1800000>;
 399                                 regulator-max-microvolt = <3300000>;
 400                         };
 401
 402                         vgen4_reg: vgen4 {
 403                                 regulator-min-microvolt = <1800000>;
 404                                 regulator-max-microvolt = <3300000>;
 405                                 regulator-always-on;
 406                         };
 407
 408                         vgen5_reg: vgen5 {
 409                                 regulator-min-microvolt = <1800000>;
 410                                 regulator-max-microvolt = <3300000>;
 411                                 regulator-always-on;
 412                         };
 413
 414                         vgen6_reg: vgen6 {
 415                                 regulator-min-microvolt = <1800000>;
 416                                 regulator-max-microvolt = <3300000>;
 417                                 regulator-always-on;
 418                         };
 419                 };
 420         };
 421 };
 422
 423 &i2c3 {
 424         clock-frequency = <100000>;
 425         pinctrl-names = "default";
 426         pinctrl-0 = <&pinctrl_i2c3>;
 427         status = "okay";
 428
 429         egalax_ts@4 {
 430                 compatible = "eeti,egalax_ts";
 431                 reg = <0x04>;
 432                 interrupt-parent = <&gpio6>;
 433                 interrupts = <7 2>;
 434                 wakeup-gpios = <&gpio6 7 0>;
 435         };
 436
 437         magnetometer@e {
 438                 compatible = "fsl,mag3110";
 439                 reg = <0x0e>;
 440                 pinctrl-names = "default";
 441                 pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
 442                 interrupt-parent = <&gpio3>;
 443                 interrupts = <16 IRQ_TYPE_EDGE_RISING>;
 444                 vdd-supply = <&reg_sensors>;
 445                 vddio-supply = <&reg_sensors>;
 446         };
 447
 448         light-sensor@44 {
 449                 compatible = "isil,isl29023";
 450                 reg = <0x44>;
 451                 pinctrl-names = "default";
 452                 pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
 453                 interrupt-parent = <&gpio3>;
 454                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 455                 vcc-supply = <&reg_sensors>;
 456         };
 457 };
 458
 459 &iomuxc {
 460         pinctrl-names = "default";
 461         pinctrl-0 = <&pinctrl_hog>;
 462
 463         imx6qdl-sabresd {
 464                 pinctrl_hog: hoggrp {
 465                         fsl,pins = <
 466                                 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
 467                                 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
 468                                 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
 469                                 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
 470                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
 471                                 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
 472                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
 473                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
 474                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
 475                         >;
 476                 };
 477
 478                 pinctrl_audmux: audmuxgrp {
 479                         fsl,pins = <
 480                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 481                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 482                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 483                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 484                         >;
 485                 };
 486
 487                 pinctrl_ecspi1: ecspi1grp {
 488                         fsl,pins = <
 489                                 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO        0x100b1
 490                                 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI        0x100b1
 491                                 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK        0x100b1
 492                                 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09         0x1b0b0
 493                         >;
 494                 };
 495
 496                 pinctrl_enet: enetgrp {
 497                         fsl,pins = <
 498                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 499                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 500                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 501                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 502                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 503                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 504                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 505                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 506                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 507                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 508                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 509                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 510                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 511                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 512                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 513                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 514                         >;
 515                 };
 516
 517                 pinctrl_gpio_keys: gpio_keysgrp {
 518                         fsl,pins = <
 519                                 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
 520                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
 521                                 MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
 522                         >;
 523                 };
 524
 525                 pinctrl_hdmi_cec: hdmicecgrp {
 526                         fsl,pins = <
 527                                 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE   0x1f8b0
 528                         >;
 529                 };
 530
 531                 pinctrl_i2c1: i2c1grp {
 532                         fsl,pins = <
 533                                 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001b8b1
 534                                 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001b8b1
 535                         >;
 536                 };
 537
 538                 pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
 539                         fsl,pins = <
 540                                 MX6QDL_PAD_SD1_CMD__GPIO1_IO18          0xb0b1
 541                         >;
 542                 };
 543
 544                 pinctrl_i2c2: i2c2grp {
 545                         fsl,pins = <
 546                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 547                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 548                         >;
 549                 };
 550
 551                 pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
 552                         fsl,pins = <
 553                                 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08        0x1b0b0
 554                         >;
 555                 };
 556
 557                 pinctrl_i2c3: i2c3grp {
 558                         fsl,pins = <
 559                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 560                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 561                         >;
 562                 };
 563
 564                 pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
 565                         fsl,pins = <
 566                                 MX6QDL_PAD_EIM_DA9__GPIO3_IO09          0xb0b1
 567                         >;
 568                 };
 569
 570                 pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
 571                         fsl,pins = <
 572                                 MX6QDL_PAD_EIM_D16__GPIO3_IO16          0xb0b1
 573                         >;
 574                 };
 575
 576                 pinctrl_ipu1_csi0: ipu1csi0grp {
 577                         fsl,pins = <
 578                                 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
 579                                 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
 580                                 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
 581                                 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
 582                                 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
 583                                 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
 584                                 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
 585                                 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
 586                                 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
 587                                 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
 588                                 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
 589                         >;
 590                 };
 591
 592                 pinctrl_ov5640: ov5640grp {
 593                         fsl,pins = <
 594                                 MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
 595                                 MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
 596                         >;
 597                 };
 598
 599                 pinctrl_ov5642: ov5642grp {
 600                         fsl,pins = <
 601                                 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
 602                                 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
 603                         >;
 604                 };
 605
 606                 pinctrl_pcie: pciegrp {
 607                         fsl,pins = <
 608                                 MX6QDL_PAD_GPIO_17__GPIO7_IO12  0x1b0b0
 609                         >;
 610                 };
 611
 612                 pinctrl_pcie_reg: pciereggrp {
 613                         fsl,pins = <
 614                                 MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x1b0b0
 615                         >;
 616                 };
 617
 618                 pinctrl_pwm1: pwm1grp {
 619                         fsl,pins = <
 620                                 MX6QDL_PAD_SD1_DAT3__PWM1_OUT           0x1b0b1
 621                         >;
 622                 };
 623
 624                 pinctrl_sensors_reg: sensorsreggrp {
 625                         fsl,pins = <
 626                                 MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x1b0b0
 627                         >;
 628                 };
 629
 630                 pinctrl_uart1: uart1grp {
 631                         fsl,pins = <
 632                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 633                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 634                         >;
 635                 };
 636
 637                 pinctrl_usbotg: usbotggrp {
 638                         fsl,pins = <
 639                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 640                         >;
 641                 };
 642
 643                 pinctrl_usdhc2: usdhc2grp {
 644                         fsl,pins = <
 645                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 646                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 647                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 648                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 649                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 650                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 651                                 MX6QDL_PAD_NANDF_D4__SD2_DATA4          0x17059
 652                                 MX6QDL_PAD_NANDF_D5__SD2_DATA5          0x17059
 653                                 MX6QDL_PAD_NANDF_D6__SD2_DATA6          0x17059
 654                                 MX6QDL_PAD_NANDF_D7__SD2_DATA7          0x17059
 655                         >;
 656                 };
 657
 658                 pinctrl_usdhc3: usdhc3grp {
 659                         fsl,pins = <
 660                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 661                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 662                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 663                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 664                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 665                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 666                                 MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x17059
 667                                 MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x17059
 668                                 MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x17059
 669                                 MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x17059
 670                         >;
 671                 };
 672
 673                 pinctrl_usdhc4: usdhc4grp {
 674                         fsl,pins = <
 675                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 676                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 677                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 678                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 679                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 680                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 681                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 682                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 683                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 684                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 685                         >;
 686                 };
 687
 688                 pinctrl_wdog: wdoggrp {
 689                         fsl,pins = <
 690                                 MX6QDL_PAD_GPIO_1__WDOG2_B              0x1b0b0
 691                         >;
 692                 };
 693         };
 694
 695         gpio_leds {
 696                 pinctrl_gpio_leds: gpioledsgrp {
 697                         fsl,pins = <
 698                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
 699                         >;
 700                 };
 701         };
 702 };
 703
 704 &ldb {
 705         status = "okay";
 706
 707         lvds-channel@1 {
 708                 fsl,data-mapping = "spwg";
 709                 fsl,data-width = <18>;
 710                 status = "okay";
 711
 712                 port@4 {
 713                         reg = <4>;
 714
 715                         lvds0_out: endpoint {
 716                                 remote-endpoint = <&panel_in>;
 717                         };
 718                 };
 719         };
 720 };
 721
 722 &pcie {
 723         pinctrl-names = "default";
 724         pinctrl-0 = <&pinctrl_pcie>;
 725         reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 726         vpcie-supply = <&reg_pcie>;
 727         status = "okay";
 728 };
 729
 730 &pwm1 {
 731         pinctrl-names = "default";
 732         pinctrl-0 = <&pinctrl_pwm1>;
 733         status = "okay";
 734 };
 735
 736 &reg_arm {
 737        vin-supply = <&sw1a_reg>;
 738 };
 739
 740 &reg_pu {
 741        vin-supply = <&sw1c_reg>;
 742 };
 743
 744 &reg_soc {
 745        vin-supply = <&sw1c_reg>;
 746 };
 747
 748 &reg_vdd1p1 {
 749         vin-supply = <&vgen5_reg>;
 750 };
 751
 752 &reg_vdd2p5 {
 753         vin-supply = <&vgen5_reg>;
 754 };
 755
 756 &snvs_poweroff {
 757         status = "okay";
 758 };
 759
 760 &snvs_pwrkey {
 761         status = "okay";
 762 };
 763
 764 &ssi2 {
 765         status = "okay";
 766 };
 767
 768 &uart1 {
 769         pinctrl-names = "default";
 770         pinctrl-0 = <&pinctrl_uart1>;
 771         status = "okay";
 772 };
 773
 774 &usbh1 {
 775         vbus-supply = <&reg_usb_h1_vbus>;
 776         status = "okay";
 777 };
 778
 779 &usbotg {
 780         vbus-supply = <&reg_usb_otg_vbus>;
 781         pinctrl-names = "default";
 782         pinctrl-0 = <&pinctrl_usbotg>;
 783         disable-over-current;
 784         status = "okay";
 785 };
 786
 787 &usdhc2 {
 788         pinctrl-names = "default";
 789         pinctrl-0 = <&pinctrl_usdhc2>;
 790         bus-width = <8>;
 791         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 792         wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 793         status = "okay";
 794 };
 795
 796 &usdhc3 {
 797         pinctrl-names = "default";
 798         pinctrl-0 = <&pinctrl_usdhc3>;
 799         bus-width = <8>;
 800         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 801         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 802         status = "okay";
 803 };
 804
 805 &usdhc4 {
 806         pinctrl-names = "default";
 807         pinctrl-0 = <&pinctrl_usdhc4>;
 808         bus-width = <8>;
 809         non-removable;
 810         no-1-8-v;
 811         status = "okay";
 812 };
 813
 814 &wdog1 {
 815         status = "disabled";
 816 };
 817
 818 &wdog2 {
 819         pinctrl-names = "default";
 820         pinctrl-0 = <&pinctrl_wdog>;
 821         fsl,ext-reset-output;
 822         status = "okay";
 823 };