arch/arm/boot/dts/omap36xx.dtsi

   1 /*
   2  * Device Tree Source for OMAP3 SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/bus/ti-sysc.h>
  12 #include <dt-bindings/media/omap3-isp.h>
  13
  14 #include "omap3.dtsi"
  15
  16 / {
  17         aliases {
  18                 serial3 = &uart4;
  19         };
  20
  21         cpus {
  22                 /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
  23                 cpu: cpu@0 {
  24                         operating-points-v2 = <&cpu0_opp_table>;
  25
  26                         vbb-supply = <&abb_mpu_iva>;
  27                         clock-latency = <300000>; /* From omap-cpufreq driver */
  28                 };
  29         };
  30
  31         /* see Documentation/devicetree/bindings/opp/opp.txt */
  32         cpu0_opp_table: opp-table {
  33                 compatible = "operating-points-v2-ti-cpu";
  34                 syscon = <&scm_conf>;
  35
  36                 opp50-300000000 {
  37                         opp-hz = /bits/ 64 <300000000>;
  38                         /*
  39                          * we currently only select the max voltage from table
  40                          * Table 4-19 of the DM3730 Data sheet (SPRS685B)
  41                          * Format is:   cpu0-supply:    <target min max>
  42                          *              vbb-supply:     <target min max>
  43                          */
  44                         opp-microvolt = <1012500 1012500 1012500>,
  45                                          <1012500 1012500 1012500>;
  46                         /*
  47                          * first value is silicon revision bit mask
  48                          * second one is "speed binned" bit mask
  49                          */
  50                         opp-supported-hw = <0xffffffff 3>;
  51                         opp-suspend;
  52                 };
  53
  54                 opp100-600000000 {
  55                         opp-hz = /bits/ 64 <600000000>;
  56                         opp-microvolt = <1200000 1200000 1200000>,
  57                                          <1200000 1200000 1200000>;
  58                         opp-supported-hw = <0xffffffff 3>;
  59                 };
  60
  61                 opp130-800000000 {
  62                         opp-hz = /bits/ 64 <800000000>;
  63                         opp-microvolt = <1325000 1325000 1325000>,
  64                                          <1325000 1325000 1325000>;
  65                         opp-supported-hw = <0xffffffff 3>;
  66                 };
  67
  68                 opp1g-1000000000 {
  69                         opp-hz = /bits/ 64 <1000000000>;
  70                         opp-microvolt = <1375000 1375000 1375000>,
  71                                          <1375000 1375000 1375000>;
  72                         /* only on am/dm37x with speed-binned bit set */
  73                         opp-supported-hw = <0xffffffff 2>;
  74                         turbo-mode;
  75                 };
  76         };
  77
  78         opp_supply_mpu_iva: opp_supply {
  79                 compatible = "ti,omap-opp-supply";
  80                 ti,absolute-max-voltage-uv = <1375000>;
  81         };
  82
  83         ocp@68000000 {
  84                 uart4: serial@49042000 {
  85                         compatible = "ti,omap3-uart";
  86                         reg = <0x49042000 0x400>;
  87                         interrupts = <80>;
  88                         dmas = <&sdma 81 &sdma 82>;
  89                         dma-names = "tx", "rx";
  90                         ti,hwmods = "uart4";
  91                         clock-frequency = <48000000>;
  92                 };
  93
  94                 abb_mpu_iva: regulator-abb-mpu {
  95                         compatible = "ti,abb-v1";
  96                         regulator-name = "abb_mpu_iva";
  97                         #address-cells = <0>;
  98                         #size-cells = <0>;
  99                         reg = <0x483072f0 0x8>, <0x48306818 0x4>;
 100                         reg-names = "base-address", "int-address";
 101                         ti,tranxdone-status-mask = <0x4000000>;
 102                         clocks = <&sys_ck>;
 103                         ti,settling-time = <30>;
 104                         ti,clock-cycles = <8>;
 105                         ti,abb_info = <
 106                         /*uV            ABB     efuse   rbb_m   fbb_m   vset_m*/
 107                         1012500         0       0       0       0       0
 108                         1200000         0       0       0       0       0
 109                         1325000         0       0       0       0       0
 110                         1375000         1       0       0       0       0
 111                         >;
 112                 };
 113
 114                 omap3_pmx_core2: pinmux@480025a0 {
 115                         compatible = "ti,omap3-padconf", "pinctrl-single";
 116                         reg = <0x480025a0 0x5c>;
 117                         #address-cells = <1>;
 118                         #size-cells = <0>;
 119                         #pinctrl-cells = <1>;
 120                         #interrupt-cells = <1>;
 121                         interrupt-controller;
 122                         pinctrl-single,register-width = <16>;
 123                         pinctrl-single,function-mask = <0xff1f>;
 124                 };
 125
 126                 isp: isp@480bc000 {
 127                         compatible = "ti,omap3-isp";
 128                         reg = <0x480bc000 0x12fc
 129                                0x480bd800 0x0600>;
 130                         interrupts = <24>;
 131                         iommus = <&mmu_isp>;
 132                         syscon = <&scm_conf 0x2f0>;
 133                         ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
 134                         #clock-cells = <1>;
 135                         ports {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                         };
 139                 };
 140
 141                 bandgap: bandgap@48002524 {
 142                         reg = <0x48002524 0x4>;
 143                         compatible = "ti,omap36xx-bandgap";
 144                         #thermal-sensor-cells = <0>;
 145                 };
 146
 147                 target-module@480cb000 {
 148                         compatible = "ti,sysc-omap3630-sr", "ti,sysc";
 149                         ti,hwmods = "smartreflex_core";
 150                         reg = <0x480cb038 0x4>;
 151                         reg-names = "sysc";
 152                         ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
 153                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 154                                         <SYSC_IDLE_NO>,
 155                                         <SYSC_IDLE_SMART>;
 156                         clocks = <&sr2_fck>;
 157                         clock-names = "fck";
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160                         ranges = <0 0x480cb000 0x001000>;
 161
 162                         smartreflex_core: smartreflex@0 {
 163                                 compatible = "ti,omap3-smartreflex-core";
 164                                 reg = <0 0x400>;
 165                                 interrupts = <19>;
 166                         };
 167                 };
 168
 169                 target-module@480c9000 {
 170                         compatible = "ti,sysc-omap3630-sr", "ti,sysc";
 171                         ti,hwmods = "smartreflex_mpu_iva";
 172                         reg = <0x480c9038 0x4>;
 173                         reg-names = "sysc";
 174                         ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
 175                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 176                                         <SYSC_IDLE_NO>,
 177                                         <SYSC_IDLE_SMART>;
 178                         clocks = <&sr1_fck>;
 179                         clock-names = "fck";
 180                         #address-cells = <1>;
 181                         #size-cells = <1>;
 182                         ranges = <0 0x480c9000 0x001000>;
 183
 184
 185                         smartreflex_mpu_iva: smartreflex@480c9000 {
 186                                 compatible = "ti,omap3-smartreflex-mpu-iva";
 187                                 reg = <0 0x400>;
 188                                 interrupts = <18>;
 189                         };
 190                 };
 191
 192                 /*
 193                  * Note that the sysconfig register layout is a subset of the
 194                  * "ti,sysc-omap4" type register with just sidle and midle bits
 195                  * available while omap34xx has "ti,sysc-omap2" type sysconfig.
 196                  */
 197                 sgx_module: target-module@50000000 {
 198                         compatible = "ti,sysc-omap4", "ti,sysc";
 199                         reg = <0x5000fe00 0x4>,
 200                               <0x5000fe10 0x4>;
 201                         reg-names = "rev", "sysc";
 202                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 203                                         <SYSC_IDLE_NO>,
 204                                         <SYSC_IDLE_SMART>;
 205                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 206                                         <SYSC_IDLE_NO>,
 207                                         <SYSC_IDLE_SMART>;
 208                         clocks = <&sgx_fck>, <&sgx_ick>;
 209                         clock-names = "fck", "ick";
 210                         #address-cells = <1>;
 211                         #size-cells = <1>;
 212                         ranges = <0 0x50000000 0x2000000>;
 213
 214                         /*
 215                          * Closed source PowerVR driver, no child device
 216                          * binding or driver in mainline
 217                          */
 218                 };
 219         };
 220
 221         thermal_zones: thermal-zones {
 222                 #include "omap3-cpu-thermal.dtsi"
 223         };
 224 };
 225
 226 &sdma {
 227         compatible = "ti,omap3630-sdma", "ti,omap-sdma";
 228 };
 229
 230 /* OMAP3630 needs dss_96m_fck for VENC */
 231 &venc {
 232         clocks = <&dss_tv_fck>, <&dss_96m_fck>;
 233         clock-names = "fck", "tv_dac_clk";
 234 };
 235
 236 &ssi {
 237         status = "ok";
 238
 239         clocks = <&ssi_ssr_fck>,
 240                  <&ssi_sst_fck>,
 241                  <&ssi_ick>;
 242         clock-names = "ssi_ssr_fck",
 243                       "ssi_sst_fck",
 244                       "ssi_ick";
 245 };
 246
 247 /include/ "omap34xx-omap36xx-clocks.dtsi"
 248 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 249 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
 250 /include/ "omap36xx-clocks.dtsi"