arch/arm/boot/dts/r8a7790-lager.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Lager board
   4  *
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7790.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Lager";
  45         compatible = "renesas,lager", "renesas,r8a7790";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scifa1;
  50                 i2c8 = &gpioi2c1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &i2cexio0;
  53                 i2c11 = &i2cexio1;
  54                 i2c12 = &i2chdmi;
  55                 i2c13 = &i2cpwr;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@140000000 {
  69                 device_type = "memory";
  70                 reg = <1 0x40000000 0 0xc0000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 one {
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  87                 };
  88                 two {
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
  94                 };
  95                 three {
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 101                 };
 102                 four {
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110
 111         leds {
 112                 compatible = "gpio-leds";
 113                 led6 {
 114                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 115                 };
 116                 led7 {
 117                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 118                 };
 119                 led8 {
 120                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 121                 };
 122         };
 123
 124         fixedregulator3v3: regulator-3v3 {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "fixed-3.3V";
 127                 regulator-min-microvolt = <3300000>;
 128                 regulator-max-microvolt = <3300000>;
 129                 regulator-boot-on;
 130                 regulator-always-on;
 131         };
 132
 133         vcc_sdhi0: regulator-vcc-sdhi0 {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "SDHI0 Vcc";
 137                 regulator-min-microvolt = <3300000>;
 138                 regulator-max-microvolt = <3300000>;
 139
 140                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142         };
 143
 144         vccq_sdhi0: regulator-vccq-sdhi0 {
 145                 compatible = "regulator-gpio";
 146
 147                 regulator-name = "SDHI0 VccQ";
 148                 regulator-min-microvolt = <1800000>;
 149                 regulator-max-microvolt = <3300000>;
 150
 151                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 152                 gpios-states = <1>;
 153                 states = <3300000 1>, <1800000 0>;
 154         };
 155
 156         vcc_sdhi2: regulator-vcc-sdhi2 {
 157                 compatible = "regulator-fixed";
 158
 159                 regulator-name = "SDHI2 Vcc";
 160                 regulator-min-microvolt = <3300000>;
 161                 regulator-max-microvolt = <3300000>;
 162
 163                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 164                 enable-active-high;
 165         };
 166
 167         vccq_sdhi2: regulator-vccq-sdhi2 {
 168                 compatible = "regulator-gpio";
 169
 170                 regulator-name = "SDHI2 VccQ";
 171                 regulator-min-microvolt = <1800000>;
 172                 regulator-max-microvolt = <3300000>;
 173
 174                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 175                 gpios-states = <1>;
 176                 states = <3300000 1>, <1800000 0>;
 177         };
 178
 179         audio_clock: audio_clock {
 180                 compatible = "fixed-clock";
 181                 #clock-cells = <0>;
 182                 clock-frequency = <11289600>;
 183         };
 184
 185         rsnd_ak4643: sound {
 186                 compatible = "simple-audio-card";
 187
 188                 simple-audio-card,format = "left_j";
 189                 simple-audio-card,bitclock-master = <&sndcodec>;
 190                 simple-audio-card,frame-master = <&sndcodec>;
 191
 192                 sndcpu: simple-audio-card,cpu {
 193                         sound-dai = <&rcar_sound>;
 194                 };
 195
 196                 sndcodec: simple-audio-card,codec {
 197                         sound-dai = <&ak4643>;
 198                         clocks = <&audio_clock>;
 199                 };
 200         };
 201
 202         vga-encoder {
 203                 compatible = "adi,adv7123";
 204
 205                 ports {
 206                         #address-cells = <1>;
 207                         #size-cells = <0>;
 208
 209                         port@0 {
 210                                 reg = <0>;
 211                                 adv7123_in: endpoint {
 212                                         remote-endpoint = <&du_out_rgb>;
 213                                 };
 214                         };
 215                         port@1 {
 216                                 reg = <1>;
 217                                 adv7123_out: endpoint {
 218                                         remote-endpoint = <&vga_in>;
 219                                 };
 220                         };
 221                 };
 222         };
 223
 224         vga {
 225                 compatible = "vga-connector";
 226
 227                 port {
 228                         vga_in: endpoint {
 229                                 remote-endpoint = <&adv7123_out>;
 230                         };
 231                 };
 232         };
 233
 234         hdmi-in {
 235                 compatible = "hdmi-connector";
 236                 type = "a";
 237
 238                 port {
 239                         hdmi_con_in: endpoint {
 240                                 remote-endpoint = <&adv7612_in>;
 241                         };
 242                 };
 243         };
 244
 245         cec_clock: cec-clock {
 246                 compatible = "fixed-clock";
 247                 #clock-cells = <0>;
 248                 clock-frequency = <12000000>;
 249         };
 250
 251         hdmi-out {
 252                 compatible = "hdmi-connector";
 253                 type = "a";
 254
 255                 port {
 256                         hdmi_con_out: endpoint {
 257                                 remote-endpoint = <&adv7511_out>;
 258                         };
 259                 };
 260         };
 261
 262         x2_clk: x2-clock {
 263                 compatible = "fixed-clock";
 264                 #clock-cells = <0>;
 265                 clock-frequency = <148500000>;
 266         };
 267
 268         x13_clk: x13-clock {
 269                 compatible = "fixed-clock";
 270                 #clock-cells = <0>;
 271                 clock-frequency = <148500000>;
 272         };
 273
 274         gpioi2c1: i2c-8 {
 275                 #address-cells = <1>;
 276                 #size-cells = <0>;
 277                 compatible = "i2c-gpio";
 278                 status = "disabled";
 279                 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 280                 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 281                 i2c-gpio,delay-us = <5>;
 282         };
 283
 284         gpioi2c2: i2c-9 {
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287                 compatible = "i2c-gpio";
 288                 status = "disabled";
 289                 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 290                 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 291                 i2c-gpio,delay-us = <5>;
 292         };
 293
 294         /*
 295          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 296          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 297          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 298          * Note: For testing the I2C slave feature, it is convenient to connect this
 299          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 300          * instantiate the slave device at runtime according to the documentation.
 301          * You can then communicate with the slave via IIC3.
 302          *
 303          * IIC0/I2C0 does not appear to support fallback to GPIO.
 304          */
 305         i2cexio0: i2c-10 {
 306                 compatible = "i2c-demux-pinctrl";
 307                 i2c-parent = <&iic0>, <&i2c0>;
 308                 i2c-bus-name = "i2c-exio0";
 309                 #address-cells = <1>;
 310                 #size-cells = <0>;
 311         };
 312
 313         /*
 314          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 315          * This is similar to the arangement described for i2cexio0 (above)
 316          * with a fallback to GPIO also provided.
 317          */
 318         i2cexio1: i2c-11 {
 319                 compatible = "i2c-demux-pinctrl";
 320                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 321                 i2c-bus-name = "i2c-exio1";
 322                 #address-cells = <1>;
 323                 #size-cells = <0>;
 324         };
 325
 326         /*
 327          * IIC2 and I2C2 may be switched using pinmux.
 328          * A fallback to GPIO is also provided.
 329          */
 330         i2chdmi: i2c-12 {
 331                 compatible = "i2c-demux-pinctrl";
 332                 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 333                 i2c-bus-name = "i2c-hdmi";
 334                 #address-cells = <1>;
 335                 #size-cells = <0>;
 336
 337                 ak4643: codec@12 {
 338                         compatible = "asahi-kasei,ak4643";
 339                         #sound-dai-cells = <0>;
 340                         reg = <0x12>;
 341                 };
 342
 343                 composite-in@20 {
 344                         compatible = "adi,adv7180";
 345                         reg = <0x20>;
 346                         remote = <&vin1>;
 347
 348                         port {
 349                                 adv7180: endpoint {
 350                                         bus-width = <8>;
 351                                         remote-endpoint = <&vin1ep0>;
 352                                 };
 353                         };
 354                 };
 355
 356                 hdmi@39 {
 357                         compatible = "adi,adv7511w";
 358                         reg = <0x39>;
 359                         interrupt-parent = <&gpio1>;
 360                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 361                         clocks = <&cec_clock>;
 362                         clock-names = "cec";
 363
 364                         adi,input-depth = <8>;
 365                         adi,input-colorspace = "rgb";
 366                         adi,input-clock = "1x";
 367                         adi,input-style = <1>;
 368                         adi,input-justification = "evenly";
 369
 370                         ports {
 371                                 #address-cells = <1>;
 372                                 #size-cells = <0>;
 373
 374                                 port@0 {
 375                                         reg = <0>;
 376                                         adv7511_in: endpoint {
 377                                                 remote-endpoint = <&lvds0_out>;
 378                                         };
 379                                 };
 380
 381                                 port@1 {
 382                                         reg = <1>;
 383                                         adv7511_out: endpoint {
 384                                                 remote-endpoint = <&hdmi_con_out>;
 385                                         };
 386                                 };
 387                         };
 388                 };
 389
 390                 hdmi-in@4c {
 391                         compatible = "adi,adv7612";
 392                         reg = <0x4c>;
 393                         interrupt-parent = <&gpio1>;
 394                         interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 395                         default-input = <0>;
 396
 397                         ports {
 398                                 #address-cells = <1>;
 399                                 #size-cells = <0>;
 400
 401                                 port@0 {
 402                                         reg = <0>;
 403                                         adv7612_in: endpoint {
 404                                                 remote-endpoint = <&hdmi_con_in>;
 405                                         };
 406                                 };
 407
 408                                 port@2 {
 409                                         reg = <2>;
 410                                         adv7612_out: endpoint {
 411                                                 remote-endpoint = <&vin0ep2>;
 412                                         };
 413                                 };
 414                         };
 415                 };
 416         };
 417
 418         /*
 419          * IIC3 and I2C3 may be switched using pinmux.
 420          * IIC3/I2C3 does not appear to support fallback to GPIO.
 421          */
 422         i2cpwr: i2c-13 {
 423                 compatible = "i2c-demux-pinctrl";
 424                 pinctrl-names = "default";
 425                 pinctrl-0 = <&pmic_irq_pins>;
 426                 i2c-parent = <&iic3>, <&i2c3>;
 427                 i2c-bus-name = "i2c-pwr";
 428                 #address-cells = <1>;
 429                 #size-cells = <0>;
 430
 431                 pmic@58 {
 432                         compatible = "dlg,da9063";
 433                         reg = <0x58>;
 434                         interrupt-parent = <&irqc0>;
 435                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 436                         interrupt-controller;
 437
 438                         rtc {
 439                                 compatible = "dlg,da9063-rtc";
 440                         };
 441
 442                         wdt {
 443                                 compatible = "dlg,da9063-watchdog";
 444                         };
 445                 };
 446
 447                 vdd_dvfs: regulator@68 {
 448                         compatible = "dlg,da9210";
 449                         reg = <0x68>;
 450                         interrupt-parent = <&irqc0>;
 451                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 452
 453                         regulator-min-microvolt = <1000000>;
 454                         regulator-max-microvolt = <1000000>;
 455                         regulator-boot-on;
 456                         regulator-always-on;
 457                 };
 458         };
 459 };
 460
 461 &du {
 462         pinctrl-0 = <&du_pins>;
 463         pinctrl-names = "default";
 464         status = "okay";
 465
 466         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
 467                  <&x13_clk>, <&x2_clk>;
 468         clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 469
 470         ports {
 471                 port@0 {
 472                         endpoint {
 473                                 remote-endpoint = <&adv7123_in>;
 474                         };
 475                 };
 476         };
 477 };
 478
 479 &lvds0 {
 480         status = "okay";
 481
 482         ports {
 483                 port@1 {
 484                         endpoint {
 485                                 remote-endpoint = <&adv7511_in>;
 486                         };
 487                 };
 488         };
 489 };
 490
 491 &lvds1 {
 492         ports {
 493                 port@1 {
 494                         lvds_connector: endpoint {
 495                         };
 496                 };
 497         };
 498 };
 499
 500 &extal_clk {
 501         clock-frequency = <20000000>;
 502 };
 503
 504 &pfc {
 505         pinctrl-0 = <&scif_clk_pins>;
 506         pinctrl-names = "default";
 507
 508         du_pins: du {
 509                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 510                 function = "du";
 511         };
 512
 513         scif0_pins: scif0 {
 514                 groups = "scif0_data";
 515                 function = "scif0";
 516         };
 517
 518         scif_clk_pins: scif_clk {
 519                 groups = "scif_clk";
 520                 function = "scif_clk";
 521         };
 522
 523         ether_pins: ether {
 524                 groups = "eth_link", "eth_mdio", "eth_rmii";
 525                 function = "eth";
 526         };
 527
 528         phy1_pins: phy1 {
 529                 groups = "intc_irq0";
 530                 function = "intc";
 531         };
 532
 533         scifa1_pins: scifa1 {
 534                 groups = "scifa1_data";
 535                 function = "scifa1";
 536         };
 537
 538         sdhi0_pins: sd0 {
 539                 groups = "sdhi0_data4", "sdhi0_ctrl";
 540                 function = "sdhi0";
 541                 power-source = <3300>;
 542         };
 543
 544         sdhi0_pins_uhs: sd0_uhs {
 545                 groups = "sdhi0_data4", "sdhi0_ctrl";
 546                 function = "sdhi0";
 547                 power-source = <1800>;
 548         };
 549
 550         sdhi2_pins: sd2 {
 551                 groups = "sdhi2_data4", "sdhi2_ctrl";
 552                 function = "sdhi2";
 553                 power-source = <3300>;
 554         };
 555
 556         sdhi2_pins_uhs: sd2_uhs {
 557                 groups = "sdhi2_data4", "sdhi2_ctrl";
 558                 function = "sdhi2";
 559                 power-source = <1800>;
 560         };
 561
 562         mmc1_pins: mmc1 {
 563                 groups = "mmc1_data8", "mmc1_ctrl";
 564                 function = "mmc1";
 565         };
 566
 567         qspi_pins: qspi {
 568                 groups = "qspi_ctrl", "qspi_data4";
 569                 function = "qspi";
 570         };
 571
 572         msiof1_pins: msiof1 {
 573                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 574                                  "msiof1_tx";
 575                 function = "msiof1";
 576         };
 577
 578         i2c0_pins: i2c0 {
 579                 groups = "i2c0";
 580                 function = "i2c0";
 581         };
 582
 583         iic0_pins: iic0 {
 584                 groups = "iic0";
 585                 function = "iic0";
 586         };
 587
 588         i2c1_pins: i2c1 {
 589                 groups = "i2c1";
 590                 function = "i2c1";
 591         };
 592
 593         iic1_pins: iic1 {
 594                 groups = "iic1";
 595                 function = "iic1";
 596         };
 597
 598         i2c2_pins: i2c2 {
 599                 groups = "i2c2";
 600                 function = "i2c2";
 601         };
 602
 603         iic2_pins: iic2 {
 604                 groups = "iic2";
 605                 function = "iic2";
 606         };
 607
 608         i2c3_pins: i2c3 {
 609                 groups = "i2c3";
 610                 function = "i2c3";
 611         };
 612
 613         iic3_pins: iic3 {
 614                 groups = "iic3";
 615                 function = "iic3";
 616         };
 617
 618         pmic_irq_pins: pmicirq {
 619                 groups = "intc_irq2";
 620                 function = "intc";
 621         };
 622
 623         hsusb_pins: hsusb {
 624                 groups = "usb0_ovc_vbus";
 625                 function = "usb0";
 626         };
 627
 628         usb0_pins: usb0 {
 629                 groups = "usb0";
 630                 function = "usb0";
 631         };
 632
 633         usb1_pins: usb1 {
 634                 groups = "usb1";
 635                 function = "usb1";
 636         };
 637
 638         usb2_pins: usb2 {
 639                 groups = "usb2";
 640                 function = "usb2";
 641         };
 642
 643         vin0_pins: vin0 {
 644                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 645                 function = "vin0";
 646         };
 647
 648         vin1_pins: vin1 {
 649                 groups = "vin1_data8", "vin1_clk";
 650                 function = "vin1";
 651         };
 652
 653         sound_pins: sound {
 654                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 655                 function = "ssi";
 656         };
 657
 658         sound_clk_pins: sound_clk {
 659                 groups = "audio_clk_a";
 660                 function = "audio_clk";
 661         };
 662 };
 663
 664 &ether {
 665         pinctrl-0 = <&ether_pins &phy1_pins>;
 666         pinctrl-names = "default";
 667
 668         phy-handle = <&phy1>;
 669         renesas,ether-link-active-low;
 670         status = "okay";
 671
 672         phy1: ethernet-phy@1 {
 673                 reg = <1>;
 674                 interrupt-parent = <&irqc0>;
 675                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 676                 micrel,led-mode = <1>;
 677         };
 678 };
 679
 680 &cmt0 {
 681         status = "okay";
 682 };
 683
 684 &mmcif1 {
 685         pinctrl-0 = <&mmc1_pins>;
 686         pinctrl-names = "default";
 687
 688         vmmc-supply = <&fixedregulator3v3>;
 689         bus-width = <8>;
 690         non-removable;
 691         status = "okay";
 692 };
 693
 694 &sata1 {
 695         status = "okay";
 696 };
 697
 698 &qspi {
 699         pinctrl-0 = <&qspi_pins>;
 700         pinctrl-names = "default";
 701
 702         status = "okay";
 703
 704         flash: flash@0 {
 705                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 706                 reg = <0>;
 707                 spi-max-frequency = <30000000>;
 708                 spi-tx-bus-width = <4>;
 709                 spi-rx-bus-width = <4>;
 710                 spi-cpha;
 711                 spi-cpol;
 712                 m25p,fast-read;
 713
 714                 partitions {
 715                         compatible = "fixed-partitions";
 716                         #address-cells = <1>;
 717                         #size-cells = <1>;
 718
 719                         partition@0 {
 720                                 label = "loader";
 721                                 reg = <0x00000000 0x00040000>;
 722                                 read-only;
 723                         };
 724                         partition@40000 {
 725                                 label = "user";
 726                                 reg = <0x00040000 0x00400000>;
 727                                 read-only;
 728                         };
 729                         partition@440000 {
 730                                 label = "flash";
 731                                 reg = <0x00440000 0x03bc0000>;
 732                         };
 733                 };
 734         };
 735 };
 736
 737 &scif0 {
 738         pinctrl-0 = <&scif0_pins>;
 739         pinctrl-names = "default";
 740
 741         status = "okay";
 742 };
 743
 744 &scifa1 {
 745         pinctrl-0 = <&scifa1_pins>;
 746         pinctrl-names = "default";
 747
 748         status = "okay";
 749 };
 750
 751 &scif_clk {
 752         clock-frequency = <14745600>;
 753 };
 754
 755 &msiof1 {
 756         pinctrl-0 = <&msiof1_pins>;
 757         pinctrl-names = "default";
 758
 759         status = "okay";
 760
 761         pmic: pmic@0 {
 762                 compatible = "renesas,r2a11302ft";
 763                 reg = <0>;
 764                 spi-max-frequency = <6000000>;
 765                 spi-cpol;
 766                 spi-cpha;
 767         };
 768 };
 769
 770 &sdhi0 {
 771         pinctrl-0 = <&sdhi0_pins>;
 772         pinctrl-1 = <&sdhi0_pins_uhs>;
 773         pinctrl-names = "default", "state_uhs";
 774
 775         vmmc-supply = <&vcc_sdhi0>;
 776         vqmmc-supply = <&vccq_sdhi0>;
 777         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 778         sd-uhs-sdr50;
 779         sd-uhs-sdr104;
 780         status = "okay";
 781 };
 782
 783 &sdhi2 {
 784         pinctrl-0 = <&sdhi2_pins>;
 785         pinctrl-1 = <&sdhi2_pins_uhs>;
 786         pinctrl-names = "default", "state_uhs";
 787
 788         vmmc-supply = <&vcc_sdhi2>;
 789         vqmmc-supply = <&vccq_sdhi2>;
 790         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 791         sd-uhs-sdr50;
 792         status = "okay";
 793 };
 794
 795 &cpu0 {
 796         cpu0-supply = <&vdd_dvfs>;
 797 };
 798
 799 &i2c0   {
 800         pinctrl-0 = <&i2c0_pins>;
 801         pinctrl-names = "i2c-exio0";
 802 };
 803
 804 &iic0   {
 805         pinctrl-0 = <&iic0_pins>;
 806         pinctrl-names = "i2c-exio0";
 807 };
 808
 809 &i2c1   {
 810         pinctrl-0 = <&i2c1_pins>;
 811         pinctrl-names = "i2c-exio1";
 812 };
 813
 814 &iic1   {
 815         pinctrl-0 = <&iic1_pins>;
 816         pinctrl-names = "i2c-exio1";
 817 };
 818
 819 &i2c2   {
 820         pinctrl-0 = <&i2c2_pins>;
 821         pinctrl-names = "i2c-hdmi";
 822
 823         clock-frequency = <100000>;
 824 };
 825
 826 &iic2   {
 827         pinctrl-0 = <&iic2_pins>;
 828         pinctrl-names = "i2c-hdmi";
 829
 830         clock-frequency = <100000>;
 831 };
 832
 833 &i2c3   {
 834         pinctrl-0 = <&i2c3_pins>;
 835         pinctrl-names = "i2c-pwr";
 836 };
 837
 838 &iic3   {
 839         pinctrl-0 = <&iic3_pins>;
 840         pinctrl-names = "i2c-pwr";
 841 };
 842
 843 &pci0 {
 844         status = "okay";
 845         pinctrl-0 = <&usb0_pins>;
 846         pinctrl-names = "default";
 847 };
 848
 849 &pci1 {
 850         status = "okay";
 851         pinctrl-0 = <&usb1_pins>;
 852         pinctrl-names = "default";
 853 };
 854
 855 &xhci {
 856         status = "okay";
 857         pinctrl-0 = <&usb2_pins>;
 858         pinctrl-names = "default";
 859 };
 860
 861 &pci2 {
 862         status = "okay";
 863         pinctrl-0 = <&usb2_pins>;
 864         pinctrl-names = "default";
 865 };
 866
 867 &hsusb {
 868         status = "okay";
 869         pinctrl-0 = <&hsusb_pins>;
 870         pinctrl-names = "default";
 871         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 872 };
 873
 874 &usbphy {
 875         status = "okay";
 876 };
 877
 878 /* HDMI video input */
 879 &vin0 {
 880         pinctrl-0 = <&vin0_pins>;
 881         pinctrl-names = "default";
 882
 883         status = "okay";
 884
 885         port {
 886                 vin0ep2: endpoint {
 887                         remote-endpoint = <&adv7612_out>;
 888                         bus-width = <24>;
 889                         hsync-active = <0>;
 890                         vsync-active = <0>;
 891                         pclk-sample = <1>;
 892                         data-active = <1>;
 893                 };
 894         };
 895 };
 896
 897 /* composite video input */
 898 &vin1 {
 899         pinctrl-0 = <&vin1_pins>;
 900         pinctrl-names = "default";
 901
 902         status = "okay";
 903
 904         port {
 905                 vin1ep0: endpoint {
 906                         remote-endpoint = <&adv7180>;
 907                         bus-width = <8>;
 908                 };
 909         };
 910 };
 911
 912 &rcar_sound {
 913         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 914         pinctrl-names = "default";
 915
 916         /* Single DAI */
 917         #sound-dai-cells = <0>;
 918
 919         status = "okay";
 920
 921         rcar_sound,dai {
 922                 dai0 {
 923                         playback = <&ssi0 &src2 &dvc0>;
 924                         capture  = <&ssi1 &src3 &dvc1>;
 925                 };
 926         };
 927 };
 928
 929 &rwdt {
 930         timeout-sec = <60>;
 931         status = "okay";
 932 };
 933
 934 &ssi1 {
 935         shared-pin;
 936 };