Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / boot / dts / rk3288-veyron-analog-audio.dtsi
blob51208d161d653ee840dd3077817380971aa534f4
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Google Veyron (and derivatives) fragment for the  max98090 audio
4  * codec and analog headphone jack.
5  *
6  * Copyright 2016 Google, Inc
7  */
9 / {
10         sound {
11                 compatible = "rockchip,rockchip-audio-max98090";
12                 pinctrl-names = "default";
13                 pinctrl-0 = <&mic_det>, <&hp_det>;
14                 rockchip,model = "VEYRON-I2S";
15                 rockchip,i2s-controller = <&i2s>;
16                 rockchip,audio-codec = <&max98090>;
17                 rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
18                 rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
19                 rockchip,headset-codec = <&headsetcodec>;
20                 rockchip,hdmi-codec = <&hdmi>;
21         };
24 &i2c2 {
25         max98090: max98090@10 {
26                 compatible = "maxim,max98090";
27                 reg = <0x10>;
28                 interrupt-parent = <&gpio6>;
29                 interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
30                 clock-names = "mclk";
31                 clocks = <&cru SCLK_I2S0_OUT>;
32                 pinctrl-names = "default";
33                 pinctrl-0 = <&int_codec>;
34         };
37 &i2c4 {
38         headsetcodec: ts3a227e@3b {
39                 compatible = "ti,ts3a227e";
40                 reg = <0x3b>;
41                 interrupt-parent = <&gpio0>;
42                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
43                 pinctrl-names = "default";
44                 pinctrl-0 = <&ts3a227e_int_l>;
45                 ti,micbias = <7>;               /* MICBIAS = 2.8V */
46         };
49 &i2s {
50         status = "okay";
53 &io_domains {
54         audio-supply = <&vcc18_codec>;
57 &rk808 {
58         vcc10-supply = <&vcc33_sys>;
60         regulators {
61                 vcc18_codec: LDO_REG6 {
62                         regulator-name = "vcc18_codec";
63                         regulator-always-on;
64                         regulator-boot-on;
65                         regulator-min-microvolt = <1800000>;
66                         regulator-max-microvolt = <1800000>;
67                         regulator-state-mem {
68                                 regulator-off-in-suspend;
69                         };
70                 };
71         };
74 &pinctrl {
75         codec {
76                 hp_det: hp-det {
77                         rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
78                 };
80                 /*
81                  * HACK: We're going to _pull down_ this _active low_ interrupt
82                  * so that it never fires.  We don't need this interrupt because
83                  * we've got a ts3a227e chip but the driver requires it.
84                  */
85                 int_codec: int-codec {
86                         rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
87                 };
89                 mic_det: mic-det {
90                         rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
91                 };
92         };
94         headset {
95                 ts3a227e_int_l: ts3a227e-int-l {
96                         rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
97                 };
98         };