arch/arm/boot/dts/stih418.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014 STMicroelectronics Limited.
   4  * Author: Peter Griffin <peter.griffin@linaro.org>
   5  */
   6 #include "stih418-clock.dtsi"
   7 #include "stih407-family.dtsi"
   8 #include "stih410-pinctrl.dtsi"
   9 / {
  10         cpus {
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 cpu@2 {
  14                         device_type = "cpu";
  15                         compatible = "arm,cortex-a9";
  16                         reg = <2>;
  17                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  18                         cpu-release-addr = <0x94100A4>;
  19                 };
  20                 cpu@3 {
  21                         device_type = "cpu";
  22                         compatible = "arm,cortex-a9";
  23                         reg = <3>;
  24                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  25                         cpu-release-addr = <0x94100A4>;
  26                 };
  27         };
  28
  29         soc {
  30                 usb2_picophy1: phy2@0 {
  31                         compatible = "st,stih407-usb2-phy";
  32                         reg = <0 0>;
  33                         #phy-cells = <0>;
  34                         st,syscfg = <&syscfg_core 0xf8 0xf4>;
  35                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
  36                                  <&picophyreset STIH407_PICOPHY0_RESET>;
  37                         reset-names = "global", "port";
  38                 };
  39
  40                 usb2_picophy2: phy3@0 {
  41                         compatible = "st,stih407-usb2-phy";
  42                         reg = <0 0>;
  43                         #phy-cells = <0>;
  44                         st,syscfg = <&syscfg_core 0xfc 0xf4>;
  45                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
  46                                  <&picophyreset STIH407_PICOPHY1_RESET>;
  47                         reset-names = "global", "port";
  48                 };
  49
  50                 ohci0: usb@9a03c00 {
  51                         compatible = "st,st-ohci-300x";
  52                         reg = <0x9a03c00 0x100>;
  53                         interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
  54                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  55                         resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
  56                                  <&softreset STIH407_USB2_PORT0_SOFTRESET>;
  57                         reset-names = "power", "softreset";
  58                         phys = <&usb2_picophy1>;
  59                         phy-names = "usb";
  60                 };
  61
  62                 ehci0: usb@9a03e00 {
  63                         compatible = "st,st-ehci-300x";
  64                         reg = <0x9a03e00 0x100>;
  65                         interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
  66                         pinctrl-names = "default";
  67                         pinctrl-0 = <&pinctrl_usb0>;
  68                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  69                         resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
  70                                  <&softreset STIH407_USB2_PORT0_SOFTRESET>;
  71                         reset-names = "power", "softreset";
  72                         phys = <&usb2_picophy1>;
  73                         phy-names = "usb";
  74                 };
  75
  76                 ohci1: usb@9a83c00 {
  77                         compatible = "st,st-ohci-300x";
  78                         reg = <0x9a83c00 0x100>;
  79                         interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
  80                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  81                         resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
  82                                  <&softreset STIH407_USB2_PORT1_SOFTRESET>;
  83                         reset-names = "power", "softreset";
  84                         phys = <&usb2_picophy2>;
  85                         phy-names = "usb";
  86                 };
  87
  88                 ehci1: usb@9a83e00 {
  89                         compatible = "st,st-ehci-300x";
  90                         reg = <0x9a83e00 0x100>;
  91                         interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
  92                         pinctrl-names = "default";
  93                         pinctrl-0 = <&pinctrl_usb1>;
  94                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  95                         resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
  96                                  <&softreset STIH407_USB2_PORT1_SOFTRESET>;
  97                         reset-names = "power", "softreset";
  98                         phys = <&usb2_picophy2>;
  99                         phy-names = "usb";
 100                 };
 101
 102                 mmc0: sdhci@9060000 {
 103                         assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
 104                         assigned-clock-parents = <&clk_s_c0_pll1 0>;
 105                         assigned-clock-rates = <200000000>;
 106                 };
 107         };
 108 };