arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * DTS for Emlid Neutis N5 Dev board.
   4  *
   5  * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
   6  */
   7
   8 /dts-v1/;
   9
  10 #include "sun8i-h3-emlid-neutis-n5h3.dtsi"
  11
  12 / {
  13         model = "Emlid Neutis N5H3 Developer board";
  14         compatible = "emlid,neutis-n5h3-devboard",
  15                      "emlid,neutis-n5h3",
  16                      "allwinner,sun8i-h3";
  17
  18         vdd_cpux: gpio-regulator {
  19                 compatible = "regulator-gpio";
  20                 regulator-name = "vdd-cpux";
  21                 regulator-type = "voltage";
  22                 regulator-boot-on;
  23                 regulator-always-on;
  24                 regulator-min-microvolt = <1100000>;
  25                 regulator-max-microvolt = <1300000>;
  26                 regulator-ramp-delay = <50>; /* 4ms */
  27                 gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
  28                 gpios-states = <0x1>;
  29                 states = <1100000 0x0>, <1300000 0x1>;
  30         };
  31
  32         connector {
  33                 compatible = "hdmi-connector";
  34                 type = "a";
  35
  36                 port {
  37                         hdmi_con_in: endpoint {
  38                                 remote-endpoint = <&hdmi_out_con>;
  39                         };
  40                 };
  41         };
  42
  43 };
  44
  45 &cpu0 {
  46         cpu-supply = <&vdd_cpux>;
  47 };
  48
  49 &codec {
  50         status = "okay";
  51 };
  52
  53 &emac {
  54         phy-handle = <&int_mii_phy>;
  55         phy-mode = "mii";
  56         allwinner,leds-active-low;
  57         status = "okay";
  58 };
  59
  60 &hdmi {
  61         status = "okay";
  62 };
  63
  64 &hdmi_out {
  65         hdmi_out_con: endpoint {
  66                 remote-endpoint = <&hdmi_con_in>;
  67         };
  68 };
  69
  70 &i2c1 {
  71         status = "okay";
  72 };