Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / boot / dts / uniphier-pxs2.dtsi
blob13b0d4a7741f3ec68099dd77dfb1f140afe5e19c
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 //
3 // Device Tree Source for UniPhier PXs2 SoC
4 //
5 // Copyright (C) 2015-2016 Socionext Inc.
6 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
8 #include <dt-bindings/gpio/uniphier-gpio.h>
9 #include <dt-bindings/thermal/thermal.h>
11 / {
12         compatible = "socionext,uniphier-pxs2";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         cpus {
17                 #address-cells = <1>;
18                 #size-cells = <0>;
20                 cpu0: cpu@0 {
21                         device_type = "cpu";
22                         compatible = "arm,cortex-a9";
23                         reg = <0>;
24                         clocks = <&sys_clk 32>;
25                         enable-method = "psci";
26                         next-level-cache = <&l2>;
27                         operating-points-v2 = <&cpu_opp>;
28                         #cooling-cells = <2>;
29                 };
31                 cpu1: cpu@1 {
32                         device_type = "cpu";
33                         compatible = "arm,cortex-a9";
34                         reg = <1>;
35                         clocks = <&sys_clk 32>;
36                         enable-method = "psci";
37                         next-level-cache = <&l2>;
38                         operating-points-v2 = <&cpu_opp>;
39                         #cooling-cells = <2>;
40                 };
42                 cpu2: cpu@2 {
43                         device_type = "cpu";
44                         compatible = "arm,cortex-a9";
45                         reg = <2>;
46                         clocks = <&sys_clk 32>;
47                         enable-method = "psci";
48                         next-level-cache = <&l2>;
49                         operating-points-v2 = <&cpu_opp>;
50                         #cooling-cells = <2>;
51                 };
53                 cpu3: cpu@3 {
54                         device_type = "cpu";
55                         compatible = "arm,cortex-a9";
56                         reg = <3>;
57                         clocks = <&sys_clk 32>;
58                         enable-method = "psci";
59                         next-level-cache = <&l2>;
60                         operating-points-v2 = <&cpu_opp>;
61                         #cooling-cells = <2>;
62                 };
63         };
65         cpu_opp: opp-table {
66                 compatible = "operating-points-v2";
67                 opp-shared;
69                 opp-100000000 {
70                         opp-hz = /bits/ 64 <100000000>;
71                         clock-latency-ns = <300>;
72                 };
73                 opp-150000000 {
74                         opp-hz = /bits/ 64 <150000000>;
75                         clock-latency-ns = <300>;
76                 };
77                 opp-200000000 {
78                         opp-hz = /bits/ 64 <200000000>;
79                         clock-latency-ns = <300>;
80                 };
81                 opp-300000000 {
82                         opp-hz = /bits/ 64 <300000000>;
83                         clock-latency-ns = <300>;
84                 };
85                 opp-400000000 {
86                         opp-hz = /bits/ 64 <400000000>;
87                         clock-latency-ns = <300>;
88                 };
89                 opp-600000000 {
90                         opp-hz = /bits/ 64 <600000000>;
91                         clock-latency-ns = <300>;
92                 };
93                 opp-800000000 {
94                         opp-hz = /bits/ 64 <800000000>;
95                         clock-latency-ns = <300>;
96                 };
97                 opp-1200000000 {
98                         opp-hz = /bits/ 64 <1200000000>;
99                         clock-latency-ns = <300>;
100                 };
101         };
103         psci {
104                 compatible = "arm,psci-0.2";
105                 method = "smc";
106         };
108         clocks {
109                 refclk: ref {
110                         compatible = "fixed-clock";
111                         #clock-cells = <0>;
112                         clock-frequency = <25000000>;
113                 };
115                 arm_timer_clk: arm-timer {
116                         #clock-cells = <0>;
117                         compatible = "fixed-clock";
118                         clock-frequency = <50000000>;
119                 };
120         };
122         thermal-zones {
123                 cpu-thermal {
124                         polling-delay-passive = <250>;  /* 250ms */
125                         polling-delay = <1000>;         /* 1000ms */
126                         thermal-sensors = <&pvtctl>;
128                         trips {
129                                 cpu_crit: cpu-crit {
130                                         temperature = <95000>;  /* 95C */
131                                         hysteresis = <2000>;
132                                         type = "critical";
133                                 };
134                                 cpu_alert: cpu-alert {
135                                         temperature = <85000>;  /* 85C */
136                                         hysteresis = <2000>;
137                                         type = "passive";
138                                 };
139                         };
141                         cooling-maps {
142                                 map {
143                                         trip = <&cpu_alert>;
144                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
145                                                          <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
146                                                          <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
147                                                          <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
148                                 };
149                         };
150                 };
151         };
153         soc {
154                 compatible = "simple-bus";
155                 #address-cells = <1>;
156                 #size-cells = <1>;
157                 ranges;
158                 interrupt-parent = <&intc>;
160                 l2: l2-cache@500c0000 {
161                         compatible = "socionext,uniphier-system-cache";
162                         reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
163                               <0x506c0000 0x400>;
164                         interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
165                         cache-unified;
166                         cache-size = <(1280 * 1024)>;
167                         cache-sets = <512>;
168                         cache-line-size = <128>;
169                         cache-level = <2>;
170                 };
172                 spi0: spi@54006000 {
173                         compatible = "socionext,uniphier-scssi";
174                         status = "disabled";
175                         reg = <0x54006000 0x100>;
176                         interrupts = <0 39 4>;
177                         pinctrl-names = "default";
178                         pinctrl-0 = <&pinctrl_spi0>;
179                         clocks = <&peri_clk 11>;
180                         resets = <&peri_rst 11>;
181                 };
183                 spi1: spi@54006100 {
184                         compatible = "socionext,uniphier-scssi";
185                         status = "disabled";
186                         reg = <0x54006100 0x100>;
187                         interrupts = <0 216 4>;
188                         pinctrl-names = "default";
189                         pinctrl-0 = <&pinctrl_spi1>;
190                         clocks = <&peri_clk 11>;
191                         resets = <&peri_rst 11>;
192                 };
194                 serial0: serial@54006800 {
195                         compatible = "socionext,uniphier-uart";
196                         status = "disabled";
197                         reg = <0x54006800 0x40>;
198                         interrupts = <0 33 4>;
199                         pinctrl-names = "default";
200                         pinctrl-0 = <&pinctrl_uart0>;
201                         clocks = <&peri_clk 0>;
202                         resets = <&peri_rst 0>;
203                 };
205                 serial1: serial@54006900 {
206                         compatible = "socionext,uniphier-uart";
207                         status = "disabled";
208                         reg = <0x54006900 0x40>;
209                         interrupts = <0 35 4>;
210                         pinctrl-names = "default";
211                         pinctrl-0 = <&pinctrl_uart1>;
212                         clocks = <&peri_clk 1>;
213                         resets = <&peri_rst 1>;
214                 };
216                 serial2: serial@54006a00 {
217                         compatible = "socionext,uniphier-uart";
218                         status = "disabled";
219                         reg = <0x54006a00 0x40>;
220                         interrupts = <0 37 4>;
221                         pinctrl-names = "default";
222                         pinctrl-0 = <&pinctrl_uart2>;
223                         clocks = <&peri_clk 2>;
224                         resets = <&peri_rst 2>;
225                 };
227                 serial3: serial@54006b00 {
228                         compatible = "socionext,uniphier-uart";
229                         status = "disabled";
230                         reg = <0x54006b00 0x40>;
231                         interrupts = <0 177 4>;
232                         pinctrl-names = "default";
233                         pinctrl-0 = <&pinctrl_uart3>;
234                         clocks = <&peri_clk 3>;
235                         resets = <&peri_rst 3>;
236                 };
238                 gpio: gpio@55000000 {
239                         compatible = "socionext,uniphier-gpio";
240                         reg = <0x55000000 0x200>;
241                         interrupt-parent = <&aidet>;
242                         interrupt-controller;
243                         #interrupt-cells = <2>;
244                         gpio-controller;
245                         #gpio-cells = <2>;
246                         gpio-ranges = <&pinctrl 0 0 0>,
247                                       <&pinctrl 96 0 0>;
248                         gpio-ranges-group-names = "gpio_range0",
249                                                   "gpio_range1";
250                         ngpios = <232>;
251                         socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
252                                                      <21 217 3>;
253                 };
255                 audio@56000000 {
256                         compatible = "socionext,uniphier-pxs2-aio";
257                         reg = <0x56000000 0x80000>;
258                         interrupts = <0 144 4>;
259                         pinctrl-names = "default";
260                         pinctrl-0 = <&pinctrl_ain1>,
261                                     <&pinctrl_ain2>,
262                                     <&pinctrl_ainiec1>,
263                                     <&pinctrl_aout2>,
264                                     <&pinctrl_aout3>,
265                                     <&pinctrl_aoutiec1>,
266                                     <&pinctrl_aoutiec2>;
267                         clock-names = "aio";
268                         clocks = <&sys_clk 40>;
269                         reset-names = "aio";
270                         resets = <&sys_rst 40>;
271                         #sound-dai-cells = <1>;
272                         socionext,syscon = <&soc_glue>;
274                         i2s_port0: port@0 {
275                                 i2s_hdmi: endpoint {
276                                 };
277                         };
279                         i2s_port1: port@1 {
280                                 i2s_line: endpoint {
281                                 };
282                         };
284                         i2s_port2: port@2 {
285                                 i2s_aux: endpoint {
286                                 };
287                         };
289                         spdif_port0: port@3 {
290                                 spdif_hiecout1: endpoint {
291                                 };
292                         };
294                         spdif_port1: port@4 {
295                                 spdif_iecout1: endpoint {
296                                 };
297                         };
299                         comp_spdif_port0: port@5 {
300                                 comp_spdif_hiecout1: endpoint {
301                                 };
302                         };
304                         comp_spdif_port1: port@6 {
305                                 comp_spdif_iecout1: endpoint {
306                                 };
307                         };
308                 };
310                 i2c0: i2c@58780000 {
311                         compatible = "socionext,uniphier-fi2c";
312                         status = "disabled";
313                         reg = <0x58780000 0x80>;
314                         #address-cells = <1>;
315                         #size-cells = <0>;
316                         interrupts = <0 41 4>;
317                         pinctrl-names = "default";
318                         pinctrl-0 = <&pinctrl_i2c0>;
319                         clocks = <&peri_clk 4>;
320                         resets = <&peri_rst 4>;
321                         clock-frequency = <100000>;
322                 };
324                 i2c1: i2c@58781000 {
325                         compatible = "socionext,uniphier-fi2c";
326                         status = "disabled";
327                         reg = <0x58781000 0x80>;
328                         #address-cells = <1>;
329                         #size-cells = <0>;
330                         interrupts = <0 42 4>;
331                         pinctrl-names = "default";
332                         pinctrl-0 = <&pinctrl_i2c1>;
333                         clocks = <&peri_clk 5>;
334                         resets = <&peri_rst 5>;
335                         clock-frequency = <100000>;
336                 };
338                 i2c2: i2c@58782000 {
339                         compatible = "socionext,uniphier-fi2c";
340                         status = "disabled";
341                         reg = <0x58782000 0x80>;
342                         #address-cells = <1>;
343                         #size-cells = <0>;
344                         interrupts = <0 43 4>;
345                         pinctrl-names = "default";
346                         pinctrl-0 = <&pinctrl_i2c2>;
347                         clocks = <&peri_clk 6>;
348                         resets = <&peri_rst 6>;
349                         clock-frequency = <100000>;
350                 };
352                 i2c3: i2c@58783000 {
353                         compatible = "socionext,uniphier-fi2c";
354                         status = "disabled";
355                         reg = <0x58783000 0x80>;
356                         #address-cells = <1>;
357                         #size-cells = <0>;
358                         interrupts = <0 44 4>;
359                         pinctrl-names = "default";
360                         pinctrl-0 = <&pinctrl_i2c3>;
361                         clocks = <&peri_clk 7>;
362                         resets = <&peri_rst 7>;
363                         clock-frequency = <100000>;
364                 };
366                 /* chip-internal connection for DMD */
367                 i2c4: i2c@58784000 {
368                         compatible = "socionext,uniphier-fi2c";
369                         reg = <0x58784000 0x80>;
370                         #address-cells = <1>;
371                         #size-cells = <0>;
372                         interrupts = <0 45 4>;
373                         clocks = <&peri_clk 8>;
374                         resets = <&peri_rst 8>;
375                         clock-frequency = <400000>;
376                 };
378                 /* chip-internal connection for STM */
379                 i2c5: i2c@58785000 {
380                         compatible = "socionext,uniphier-fi2c";
381                         reg = <0x58785000 0x80>;
382                         #address-cells = <1>;
383                         #size-cells = <0>;
384                         interrupts = <0 25 4>;
385                         clocks = <&peri_clk 9>;
386                         resets = <&peri_rst 9>;
387                         clock-frequency = <400000>;
388                 };
390                 /* chip-internal connection for HDMI */
391                 i2c6: i2c@58786000 {
392                         compatible = "socionext,uniphier-fi2c";
393                         reg = <0x58786000 0x80>;
394                         #address-cells = <1>;
395                         #size-cells = <0>;
396                         interrupts = <0 26 4>;
397                         clocks = <&peri_clk 10>;
398                         resets = <&peri_rst 10>;
399                         clock-frequency = <400000>;
400                 };
402                 system_bus: system-bus@58c00000 {
403                         compatible = "socionext,uniphier-system-bus";
404                         status = "disabled";
405                         reg = <0x58c00000 0x400>;
406                         #address-cells = <2>;
407                         #size-cells = <1>;
408                         pinctrl-names = "default";
409                         pinctrl-0 = <&pinctrl_system_bus>;
410                 };
412                 smpctrl@59801000 {
413                         compatible = "socionext,uniphier-smpctrl";
414                         reg = <0x59801000 0x400>;
415                 };
417                 sdctrl@59810000 {
418                         compatible = "socionext,uniphier-pxs2-sdctrl",
419                                      "simple-mfd", "syscon";
420                         reg = <0x59810000 0x400>;
422                         sd_clk: clock {
423                                 compatible = "socionext,uniphier-pxs2-sd-clock";
424                                 #clock-cells = <1>;
425                         };
427                         sd_rst: reset {
428                                 compatible = "socionext,uniphier-pxs2-sd-reset";
429                                 #reset-cells = <1>;
430                         };
431                 };
433                 perictrl@59820000 {
434                         compatible = "socionext,uniphier-pxs2-perictrl",
435                                      "simple-mfd", "syscon";
436                         reg = <0x59820000 0x200>;
438                         peri_clk: clock {
439                                 compatible = "socionext,uniphier-pxs2-peri-clock";
440                                 #clock-cells = <1>;
441                         };
443                         peri_rst: reset {
444                                 compatible = "socionext,uniphier-pxs2-peri-reset";
445                                 #reset-cells = <1>;
446                         };
447                 };
449                 emmc: sdhc@5a000000 {
450                         compatible = "socionext,uniphier-sd-v3.1.1";
451                         status = "disabled";
452                         reg = <0x5a000000 0x800>;
453                         interrupts = <0 78 4>;
454                         pinctrl-names = "default";
455                         pinctrl-0 = <&pinctrl_emmc>;
456                         clocks = <&sd_clk 1>;
457                         reset-names = "host", "hw";
458                         resets = <&sd_rst 1>, <&sd_rst 6>;
459                         bus-width = <8>;
460                         cap-mmc-highspeed;
461                         cap-mmc-hw-reset;
462                         non-removable;
463                 };
465                 sd: sdhc@5a400000 {
466                         compatible = "socionext,uniphier-sd-v3.1.1";
467                         status = "disabled";
468                         reg = <0x5a400000 0x800>;
469                         interrupts = <0 76 4>;
470                         pinctrl-names = "default", "uhs";
471                         pinctrl-0 = <&pinctrl_sd>;
472                         pinctrl-1 = <&pinctrl_sd_uhs>;
473                         clocks = <&sd_clk 0>;
474                         reset-names = "host";
475                         resets = <&sd_rst 0>;
476                         bus-width = <4>;
477                         cap-sd-highspeed;
478                         sd-uhs-sdr12;
479                         sd-uhs-sdr25;
480                         sd-uhs-sdr50;
481                 };
483                 soc_glue: soc-glue@5f800000 {
484                         compatible = "socionext,uniphier-pxs2-soc-glue",
485                                      "simple-mfd", "syscon";
486                         reg = <0x5f800000 0x2000>;
488                         pinctrl: pinctrl {
489                                 compatible = "socionext,uniphier-pxs2-pinctrl";
490                         };
491                 };
493                 soc-glue@5f900000 {
494                         compatible = "socionext,uniphier-pxs2-soc-glue-debug",
495                                      "simple-mfd";
496                         #address-cells = <1>;
497                         #size-cells = <1>;
498                         ranges = <0 0x5f900000 0x2000>;
500                         efuse@100 {
501                                 compatible = "socionext,uniphier-efuse";
502                                 reg = <0x100 0x28>;
503                         };
505                         efuse@200 {
506                                 compatible = "socionext,uniphier-efuse";
507                                 reg = <0x200 0x58>;
508                         };
509                 };
511                 aidet: aidet@5fc20000 {
512                         compatible = "socionext,uniphier-pxs2-aidet";
513                         reg = <0x5fc20000 0x200>;
514                         interrupt-controller;
515                         #interrupt-cells = <2>;
516                 };
518                 timer@60000200 {
519                         compatible = "arm,cortex-a9-global-timer";
520                         reg = <0x60000200 0x20>;
521                         interrupts = <1 11 0xf04>;
522                         clocks = <&arm_timer_clk>;
523                 };
525                 timer@60000600 {
526                         compatible = "arm,cortex-a9-twd-timer";
527                         reg = <0x60000600 0x20>;
528                         interrupts = <1 13 0xf04>;
529                         clocks = <&arm_timer_clk>;
530                 };
532                 intc: interrupt-controller@60001000 {
533                         compatible = "arm,cortex-a9-gic";
534                         reg = <0x60001000 0x1000>,
535                               <0x60000100 0x100>;
536                         #interrupt-cells = <3>;
537                         interrupt-controller;
538                 };
540                 sysctrl@61840000 {
541                         compatible = "socionext,uniphier-pxs2-sysctrl",
542                                      "simple-mfd", "syscon";
543                         reg = <0x61840000 0x10000>;
545                         sys_clk: clock {
546                                 compatible = "socionext,uniphier-pxs2-clock";
547                                 #clock-cells = <1>;
548                         };
550                         sys_rst: reset {
551                                 compatible = "socionext,uniphier-pxs2-reset";
552                                 #reset-cells = <1>;
553                         };
555                         pvtctl: pvtctl {
556                                 compatible = "socionext,uniphier-pxs2-thermal";
557                                 interrupts = <0 3 4>;
558                                 #thermal-sensor-cells = <0>;
559                                 socionext,tmod-calibration = <0x0f86 0x6844>;
560                         };
561                 };
563                 eth: ethernet@65000000 {
564                         compatible = "socionext,uniphier-pxs2-ave4";
565                         status = "disabled";
566                         reg = <0x65000000 0x8500>;
567                         interrupts = <0 66 4>;
568                         pinctrl-names = "default";
569                         pinctrl-0 = <&pinctrl_ether_rgmii>;
570                         clock-names = "ether";
571                         clocks = <&sys_clk 6>;
572                         reset-names = "ether";
573                         resets = <&sys_rst 6>;
574                         phy-mode = "rgmii";
575                         local-mac-address = [00 00 00 00 00 00];
576                         socionext,syscon-phy-mode = <&soc_glue 0>;
578                         mdio: mdio {
579                                 #address-cells = <1>;
580                                 #size-cells = <0>;
581                         };
582                 };
584                 usb0: usb@65a00000 {
585                         compatible = "socionext,uniphier-dwc3", "snps,dwc3";
586                         status = "disabled";
587                         reg = <0x65a00000 0xcd00>;
588                         interrupt-names = "host", "peripheral";
589                         interrupts = <0 134 4>, <0 135 4>;
590                         pinctrl-names = "default";
591                         pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
592                         clock-names = "ref", "bus_early", "suspend";
593                         clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
594                         resets = <&usb0_rst 15>;
595                         phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
596                                <&usb0_ssphy0>, <&usb0_ssphy1>;
597                         dr_mode = "host";
598                 };
600                 usb-glue@65b00000 {
601                         compatible = "socionext,uniphier-pxs2-dwc3-glue",
602                                      "simple-mfd";
603                         #address-cells = <1>;
604                         #size-cells = <1>;
605                         ranges = <0 0x65b00000 0x400>;
607                         usb0_rst: reset@0 {
608                                 compatible = "socionext,uniphier-pxs2-usb3-reset";
609                                 reg = <0x0 0x4>;
610                                 #reset-cells = <1>;
611                                 clock-names = "link";
612                                 clocks = <&sys_clk 14>;
613                                 reset-names = "link";
614                                 resets = <&sys_rst 14>;
615                         };
617                         usb0_vbus0: regulator@100 {
618                                 compatible = "socionext,uniphier-pxs2-usb3-regulator";
619                                 reg = <0x100 0x10>;
620                                 clock-names = "link";
621                                 clocks = <&sys_clk 14>;
622                                 reset-names = "link";
623                                 resets = <&sys_rst 14>;
624                         };
626                         usb0_vbus1: regulator@110 {
627                                 compatible = "socionext,uniphier-pxs2-usb3-regulator";
628                                 reg = <0x110 0x10>;
629                                 clock-names = "link";
630                                 clocks = <&sys_clk 14>;
631                                 reset-names = "link";
632                                 resets = <&sys_rst 14>;
633                         };
635                         usb0_hsphy0: hs-phy@200 {
636                                 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
637                                 reg = <0x200 0x10>;
638                                 #phy-cells = <0>;
639                                 clock-names = "link", "phy";
640                                 clocks = <&sys_clk 14>, <&sys_clk 16>;
641                                 reset-names = "link", "phy";
642                                 resets = <&sys_rst 14>, <&sys_rst 16>;
643                                 vbus-supply = <&usb0_vbus0>;
644                         };
646                         usb0_hsphy1: hs-phy@210 {
647                                 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
648                                 reg = <0x210 0x10>;
649                                 #phy-cells = <0>;
650                                 clock-names = "link", "phy";
651                                 clocks = <&sys_clk 14>, <&sys_clk 16>;
652                                 reset-names = "link", "phy";
653                                 resets = <&sys_rst 14>, <&sys_rst 16>;
654                                 vbus-supply = <&usb0_vbus1>;
655                         };
657                         usb0_ssphy0: ss-phy@300 {
658                                 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
659                                 reg = <0x300 0x10>;
660                                 #phy-cells = <0>;
661                                 clock-names = "link", "phy";
662                                 clocks = <&sys_clk 14>, <&sys_clk 17>;
663                                 reset-names = "link", "phy";
664                                 resets = <&sys_rst 14>, <&sys_rst 17>;
665                                 vbus-supply = <&usb0_vbus0>;
666                         };
668                         usb0_ssphy1: ss-phy@310 {
669                                 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
670                                 reg = <0x310 0x10>;
671                                 #phy-cells = <0>;
672                                 clock-names = "link", "phy";
673                                 clocks = <&sys_clk 14>, <&sys_clk 18>;
674                                 reset-names = "link", "phy";
675                                 resets = <&sys_rst 14>, <&sys_rst 18>;
676                                 vbus-supply = <&usb0_vbus1>;
677                         };
678                 };
680                 usb1: usb@65c00000 {
681                         compatible = "socionext,uniphier-dwc3", "snps,dwc3";
682                         status = "disabled";
683                         reg = <0x65c00000 0xcd00>;
684                         interrupt-names = "host", "peripheral";
685                         interrupts = <0 137 4>, <0 138 4>;
686                         pinctrl-names = "default";
687                         pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
688                         clock-names = "ref", "bus_early", "suspend";
689                         clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
690                         resets = <&usb1_rst 15>;
691                         phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
692                         dr_mode = "host";
693                 };
695                 usb-glue@65d00000 {
696                         compatible = "socionext,uniphier-pxs2-dwc3-glue",
697                                      "simple-mfd";
698                         #address-cells = <1>;
699                         #size-cells = <1>;
700                         ranges = <0 0x65d00000 0x400>;
702                         usb1_rst: reset@0 {
703                                 compatible = "socionext,uniphier-pxs2-usb3-reset";
704                                 reg = <0x0 0x4>;
705                                 #reset-cells = <1>;
706                                 clock-names = "link";
707                                 clocks = <&sys_clk 15>;
708                                 reset-names = "link";
709                                 resets = <&sys_rst 15>;
710                         };
712                         usb1_vbus0: regulator@100 {
713                                 compatible = "socionext,uniphier-pxs2-usb3-regulator";
714                                 reg = <0x100 0x10>;
715                                 clock-names = "link";
716                                 clocks = <&sys_clk 15>;
717                                 reset-names = "link";
718                                 resets = <&sys_rst 15>;
719                         };
721                         usb1_vbus1: regulator@110 {
722                                 compatible = "socionext,uniphier-pxs2-usb3-regulator";
723                                 reg = <0x110 0x10>;
724                                 clock-names = "link";
725                                 clocks = <&sys_clk 15>;
726                                 reset-names = "link";
727                                 resets = <&sys_rst 15>;
728                         };
730                         usb1_hsphy0: hs-phy@200 {
731                                 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
732                                 reg = <0x200 0x10>;
733                                 #phy-cells = <0>;
734                                 clock-names = "link", "phy";
735                                 clocks = <&sys_clk 15>, <&sys_clk 20>;
736                                 reset-names = "link", "phy";
737                                 resets = <&sys_rst 15>, <&sys_rst 20>;
738                                 vbus-supply = <&usb1_vbus0>;
739                         };
741                         usb1_hsphy1: hs-phy@210 {
742                                 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
743                                 reg = <0x210 0x10>;
744                                 #phy-cells = <0>;
745                                 clock-names = "link", "phy";
746                                 clocks = <&sys_clk 15>, <&sys_clk 20>;
747                                 reset-names = "link", "phy";
748                                 resets = <&sys_rst 15>, <&sys_rst 20>;
749                                 vbus-supply = <&usb1_vbus1>;
750                         };
752                         usb1_ssphy0: ss-phy@300 {
753                                 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
754                                 reg = <0x300 0x10>;
755                                 #phy-cells = <0>;
756                                 clock-names = "link", "phy";
757                                 clocks = <&sys_clk 15>, <&sys_clk 21>;
758                                 reset-names = "link", "phy";
759                                 resets = <&sys_rst 15>, <&sys_rst 21>;
760                                 vbus-supply = <&usb1_vbus0>;
761                         };
762                 };
764                 nand: nand@68000000 {
765                         compatible = "socionext,uniphier-denali-nand-v5b";
766                         status = "disabled";
767                         reg-names = "nand_data", "denali_reg";
768                         reg = <0x68000000 0x20>, <0x68100000 0x1000>;
769                         #address-cells = <1>;
770                         #size-cells = <0>;
771                         interrupts = <0 65 4>;
772                         pinctrl-names = "default";
773                         pinctrl-0 = <&pinctrl_nand>;
774                         clock-names = "nand", "nand_x", "ecc";
775                         clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
776                         reset-names = "nand", "reg";
777                         resets = <&sys_rst 2>, <&sys_rst 2>;
778                 };
779         };
782 #include "uniphier-pinctrl.dtsi"