arch/arm/boot/dts/vf610-twr.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Copyright 2013 Freescale Semiconductor, Inc.
   4
   5 /dts-v1/;
   6 #include "vf610.dtsi"
   7
   8 / {
   9         model = "VF610 Tower Board";
  10         compatible = "fsl,vf610-twr", "fsl,vf610";
  11
  12         chosen {
  13                 bootargs = "console=ttyLP1,115200";
  14         };
  15
  16         memory@80000000 {
  17                 device_type = "memory";
  18                 reg = <0x80000000 0x8000000>;
  19         };
  20
  21         audio_ext: mclk_osc {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <24576000>;
  25         };
  26
  27         enet_ext: eth_osc {
  28                 compatible = "fixed-clock";
  29                 #clock-cells = <0>;
  30                 clock-frequency = <50000000>;
  31         };
  32
  33         regulators {
  34                 compatible = "simple-bus";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37
  38                 reg_3p3v: regulator@0 {
  39                         compatible = "regulator-fixed";
  40                         reg = <0>;
  41                         regulator-name = "3P3V";
  42                         regulator-min-microvolt = <3300000>;
  43                         regulator-max-microvolt = <3300000>;
  44                         regulator-always-on;
  45                 };
  46
  47                 reg_vcc_3v3_mcu: regulator@1 {
  48                         compatible = "regulator-fixed";
  49                         reg = <1>;
  50                         regulator-name = "vcc_3v3_mcu";
  51                         regulator-min-microvolt = <3300000>;
  52                         regulator-max-microvolt = <3300000>;
  53                 };
  54         };
  55
  56         sound {
  57                 compatible = "simple-audio-card";
  58                 simple-audio-card,format = "i2s";
  59                 simple-audio-card,widgets =
  60                         "Microphone", "Microphone Jack",
  61                         "Headphone", "Headphone Jack",
  62                         "Speaker", "Speaker Ext",
  63                         "Line", "Line In Jack";
  64                 simple-audio-card,routing =
  65                         "MIC_IN", "Microphone Jack",
  66                         "Microphone Jack", "Mic Bias",
  67                         "LINE_IN", "Line In Jack",
  68                         "Headphone Jack", "HP_OUT",
  69                         "Speaker Ext", "LINE_OUT";
  70
  71                 simple-audio-card,cpu {
  72                         sound-dai = <&sai2>;
  73                         frame-master;
  74                         bitclock-master;
  75                 };
  76
  77                 simple-audio-card,codec {
  78                         sound-dai = <&codec>;
  79                         frame-master;
  80                         bitclock-master;
  81                 };
  82         };
  83 };
  84
  85 &adc0 {
  86         pinctrl-names = "default";
  87         pinctrl-0 = <&pinctrl_adc0_ad5>;
  88         vref-supply = <&reg_vcc_3v3_mcu>;
  89         status = "okay";
  90 };
  91
  92 &clks {
  93         clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
  94         clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
  95         assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
  96                           <&clks VF610_CLK_ENET_TS_SEL>;
  97         assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
  98                                  <&clks VF610_CLK_ENET_EXT>;
  99 };
 100
 101 &dspi0 {
 102         bus-num = <0>;
 103         pinctrl-names = "default";
 104         pinctrl-0 = <&pinctrl_dspi0>;
 105         status = "okay";
 106
 107         sflash: at26df081a@0 {
 108                 #address-cells = <1>;
 109                 #size-cells = <1>;
 110                 compatible = "atmel,at26df081a";
 111                 spi-max-frequency = <16000000>;
 112                 spi-cpol;
 113                 spi-cpha;
 114                 reg = <0>;
 115         };
 116 };
 117
 118 &edma0 {
 119         status = "okay";
 120 };
 121
 122 &esdhc1 {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_esdhc1>;
 125         bus-width = <4>;
 126         cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
 127         status = "okay";
 128 };
 129
 130 &fec0 {
 131         phy-mode = "rmii";
 132         phy-handle = <&ethphy0>;
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&pinctrl_fec0>;
 135         status = "okay";
 136
 137         mdio {
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140
 141                 ethphy0: ethernet-phy@0 {
 142                         reg = <0>;
 143                 };
 144
 145                 ethphy1: ethernet-phy@1 {
 146                         reg = <1>;
 147                 };
 148         };
 149 };
 150
 151 &fec1 {
 152         phy-mode = "rmii";
 153         phy-handle = <&ethphy1>;
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&pinctrl_fec1>;
 156         status = "okay";
 157 };
 158
 159 &i2c0 {
 160         clock-frequency = <100000>;
 161         pinctrl-names = "default";
 162         pinctrl-0 = <&pinctrl_i2c0>;
 163         status = "okay";
 164
 165         codec: sgtl5000@a {
 166                #sound-dai-cells = <0>;
 167                compatible = "fsl,sgtl5000";
 168                reg = <0x0a>;
 169                VDDA-supply = <&reg_3p3v>;
 170                VDDIO-supply = <&reg_3p3v>;
 171                clocks = <&clks VF610_CLK_SAI2>;
 172        };
 173 };
 174
 175 &iomuxc {
 176         vf610-twr {
 177                 pinctrl_adc0_ad5: adc0ad5grp {
 178                         fsl,pins = <
 179                                 VF610_PAD_PTC30__ADC0_SE5               0xa1
 180                         >;
 181                 };
 182
 183                 pinctrl_dspi0: dspi0grp {
 184                         fsl,pins = <
 185                                 VF610_PAD_PTB19__DSPI0_CS0              0x1182
 186                                 VF610_PAD_PTB20__DSPI0_SIN              0x1181
 187                                 VF610_PAD_PTB21__DSPI0_SOUT             0x1182
 188                                 VF610_PAD_PTB22__DSPI0_SCK              0x1182
 189                         >;
 190                 };
 191
 192                 pinctrl_esdhc1: esdhc1grp {
 193                         fsl,pins = <
 194                                 VF610_PAD_PTA24__ESDHC1_CLK     0x31ef
 195                                 VF610_PAD_PTA25__ESDHC1_CMD     0x31ef
 196                                 VF610_PAD_PTA26__ESDHC1_DAT0    0x31ef
 197                                 VF610_PAD_PTA27__ESDHC1_DAT1    0x31ef
 198                                 VF610_PAD_PTA28__ESDHC1_DATA2   0x31ef
 199                                 VF610_PAD_PTA29__ESDHC1_DAT3    0x31ef
 200                                 VF610_PAD_PTA7__GPIO_134        0x219d
 201                         >;
 202                 };
 203
 204                 pinctrl_fec0: fec0grp {
 205                         fsl,pins = <
 206                                 VF610_PAD_PTA6__RMII_CLKIN              0x30d1
 207                                 VF610_PAD_PTC0__ENET_RMII0_MDC          0x30d3
 208                                 VF610_PAD_PTC1__ENET_RMII0_MDIO         0x30d1
 209                                 VF610_PAD_PTC2__ENET_RMII0_CRS          0x30d1
 210                                 VF610_PAD_PTC3__ENET_RMII0_RXD1         0x30d1
 211                                 VF610_PAD_PTC4__ENET_RMII0_RXD0         0x30d1
 212                                 VF610_PAD_PTC5__ENET_RMII0_RXER         0x30d1
 213                                 VF610_PAD_PTC6__ENET_RMII0_TXD1         0x30d2
 214                                 VF610_PAD_PTC7__ENET_RMII0_TXD0         0x30d2
 215                                 VF610_PAD_PTC8__ENET_RMII0_TXEN         0x30d2
 216                         >;
 217                 };
 218
 219                 pinctrl_fec1: fec1grp {
 220                         fsl,pins = <
 221                                 VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
 222                                 VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
 223                                 VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
 224                                 VF610_PAD_PTC12__ENET_RMII1_RXD1        0x30d1
 225                                 VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
 226                                 VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
 227                                 VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
 228                                 VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
 229                                 VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
 230                         >;
 231                 };
 232
 233                 pinctrl_i2c0: i2c0grp {
 234                         fsl,pins = <
 235                                 VF610_PAD_PTB14__I2C0_SCL               0x30d3
 236                                 VF610_PAD_PTB15__I2C0_SDA               0x30d3
 237                         >;
 238                 };
 239
 240                 pinctrl_nfc: nfcgrp {
 241                         fsl,pins = <
 242                                 VF610_PAD_PTD31__NF_IO15        0x28df
 243                                 VF610_PAD_PTD30__NF_IO14        0x28df
 244                                 VF610_PAD_PTD29__NF_IO13        0x28df
 245                                 VF610_PAD_PTD28__NF_IO12        0x28df
 246                                 VF610_PAD_PTD27__NF_IO11        0x28df
 247                                 VF610_PAD_PTD26__NF_IO10        0x28df
 248                                 VF610_PAD_PTD25__NF_IO9         0x28df
 249                                 VF610_PAD_PTD24__NF_IO8         0x28df
 250                                 VF610_PAD_PTD23__NF_IO7         0x28df
 251                                 VF610_PAD_PTD22__NF_IO6         0x28df
 252                                 VF610_PAD_PTD21__NF_IO5         0x28df
 253                                 VF610_PAD_PTD20__NF_IO4         0x28df
 254                                 VF610_PAD_PTD19__NF_IO3         0x28df
 255                                 VF610_PAD_PTD18__NF_IO2         0x28df
 256                                 VF610_PAD_PTD17__NF_IO1         0x28df
 257                                 VF610_PAD_PTD16__NF_IO0         0x28df
 258                                 VF610_PAD_PTB24__NF_WE_B        0x28c2
 259                                 VF610_PAD_PTB25__NF_CE0_B       0x28c2
 260                                 VF610_PAD_PTB27__NF_RE_B        0x28c2
 261                                 VF610_PAD_PTC26__NF_RB_B        0x283d
 262                                 VF610_PAD_PTC27__NF_ALE         0x28c2
 263                                 VF610_PAD_PTC28__NF_CLE         0x28c2
 264                         >;
 265                 };
 266
 267                 pinctrl_pwm0: pwm0grp {
 268                         fsl,pins = <
 269                                 VF610_PAD_PTB0__FTM0_CH0                0x1582
 270                                 VF610_PAD_PTB1__FTM0_CH1                0x1582
 271                                 VF610_PAD_PTB2__FTM0_CH2                0x1582
 272                                 VF610_PAD_PTB3__FTM0_CH3                0x1582
 273                         >;
 274                 };
 275
 276                 pinctrl_sai2: sai2grp {
 277                         fsl,pins = <
 278                                 VF610_PAD_PTA16__SAI2_TX_BCLK           0x02ed
 279                                 VF610_PAD_PTA18__SAI2_TX_DATA           0x02ee
 280                                 VF610_PAD_PTA19__SAI2_TX_SYNC           0x02ed
 281                                 VF610_PAD_PTA21__SAI2_RX_BCLK           0x02ed
 282                                 VF610_PAD_PTA22__SAI2_RX_DATA           0x02ed
 283                                 VF610_PAD_PTA23__SAI2_RX_SYNC           0x02ed
 284                                 VF610_PAD_PTB18__EXT_AUDIO_MCLK         0x02ed
 285                         >;
 286                 };
 287
 288                 pinctrl_uart1: uart1grp {
 289                         fsl,pins = <
 290                                 VF610_PAD_PTB4__UART1_TX                0x21a2
 291                                 VF610_PAD_PTB5__UART1_RX                0x21a1
 292                         >;
 293                 };
 294
 295                 pinctrl_uart2: uart2grp {
 296                         fsl,pins = <
 297                                 VF610_PAD_PTB6__UART2_TX                0x21a2
 298                                 VF610_PAD_PTB7__UART2_RX                0x21a1
 299                         >;
 300                 };
 301         };
 302 };
 303
 304 &nfc {
 305         assigned-clocks = <&clks VF610_CLK_NFC>;
 306         assigned-clock-rates = <33000000>;
 307         pinctrl-names = "default";
 308         pinctrl-0 = <&pinctrl_nfc>;
 309         status = "okay";
 310
 311         nand@0 {
 312                 compatible = "fsl,vf610-nfc-nandcs";
 313                 reg = <0>;
 314                 #address-cells = <1>;
 315                 #size-cells = <1>;
 316                 nand-bus-width = <16>;
 317                 nand-ecc-mode = "hw";
 318                 nand-ecc-strength = <24>;
 319                 nand-ecc-step-size = <2048>;
 320                 nand-on-flash-bbt;
 321         };
 322 };
 323
 324 &pwm0 {
 325         pinctrl-names = "default";
 326         pinctrl-0 = <&pinctrl_pwm0>;
 327         status = "okay";
 328 };
 329
 330 &sai2 {
 331         #sound-dai-cells = <0>;
 332         pinctrl-names = "default";
 333         pinctrl-0 = <&pinctrl_sai2>;
 334         status = "okay";
 335 };
 336
 337 &uart1 {
 338         pinctrl-names = "default";
 339         pinctrl-0 = <&pinctrl_uart1>;
 340         status = "okay";
 341 };
 342
 343 &uart2 {
 344         pinctrl-names = "default";
 345         pinctrl-0 = <&pinctrl_uart2>;
 346         status = "okay";
 347 };
 348
 349 &usbdev0 {
 350         disable-over-current;
 351         status = "okay";
 352 };
 353
 354 &usbh1 {
 355         disable-over-current;
 356         status = "okay";
 357 };
 358
 359 &usbmisc0 {
 360         status = "okay";
 361 };
 362
 363 &usbmisc1 {
 364         status = "okay";
 365 };
 366
 367 &usbphy0 {
 368         status = "okay";
 369 };
 370
 371 &usbphy1 {
 372         status = "okay";
 373 };