Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / kernel / smp_scu.c
blob6de47fb3b8282932d417b7a73649843493acce7e
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/kernel/smp_scu.c
5 * Copyright (C) 2002 ARM Ltd.
6 * All Rights Reserved
7 */
8 #include <linux/init.h>
9 #include <linux/io.h>
11 #include <asm/smp_plat.h>
12 #include <asm/smp_scu.h>
13 #include <asm/cacheflush.h>
14 #include <asm/cputype.h>
16 #define SCU_CTRL 0x00
17 #define SCU_ENABLE (1 << 0)
18 #define SCU_STANDBY_ENABLE (1 << 5)
19 #define SCU_CONFIG 0x04
20 #define SCU_CPU_STATUS 0x08
21 #define SCU_CPU_STATUS_MASK GENMASK(1, 0)
22 #define SCU_INVALIDATE 0x0c
23 #define SCU_FPGA_REVISION 0x10
25 #ifdef CONFIG_SMP
27 * Get the number of CPU cores from the SCU configuration
29 unsigned int __init scu_get_core_count(void __iomem *scu_base)
31 unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
32 return (ncores & 0x03) + 1;
36 * Enable the SCU
38 void scu_enable(void __iomem *scu_base)
40 u32 scu_ctrl;
42 #ifdef CONFIG_ARM_ERRATA_764369
43 /* Cortex-A9 only */
44 if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
45 scu_ctrl = readl_relaxed(scu_base + 0x30);
46 if (!(scu_ctrl & 1))
47 writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
49 #endif
51 scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
52 /* already enabled? */
53 if (scu_ctrl & SCU_ENABLE)
54 return;
56 scu_ctrl |= SCU_ENABLE;
58 /* Cortex-A9 earlier than r2p0 has no standby bit in SCU */
59 if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 &&
60 (read_cpuid_id() & 0x00f0000f) >= 0x00200000)
61 scu_ctrl |= SCU_STANDBY_ENABLE;
63 writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
66 * Ensure that the data accessed by CPU0 before the SCU was
67 * initialised is visible to the other CPUs.
69 flush_cache_all();
71 #endif
73 static int scu_set_power_mode_internal(void __iomem *scu_base,
74 unsigned int logical_cpu,
75 unsigned int mode)
77 unsigned int val;
78 int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
80 if (mode > 3 || mode == 1 || cpu > 3)
81 return -EINVAL;
83 val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
84 val &= ~SCU_CPU_STATUS_MASK;
85 val |= mode;
86 writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
88 return 0;
92 * Set the executing CPUs power mode as defined. This will be in
93 * preparation for it executing a WFI instruction.
95 * This function must be called with preemption disabled, and as it
96 * has the side effect of disabling coherency, caches must have been
97 * flushed. Interrupts must also have been disabled.
99 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
101 return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode);
105 * Set the given (logical) CPU's power mode to SCU_PM_NORMAL.
107 int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu)
109 return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL);
112 int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu)
114 unsigned int val;
115 int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
117 if (cpu > 3)
118 return -EINVAL;
120 val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
121 val &= SCU_CPU_STATUS_MASK;
123 return val;