Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / mach-socfpga / ocram.c
blobb4d397e834a023575b26d764038f38638ed14179
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright Altera Corporation (C) 2016. All rights reserved.
4 */
5 #include <linux/delay.h>
6 #include <linux/io.h>
7 #include <linux/genalloc.h>
8 #include <linux/module.h>
9 #include <linux/of_address.h>
10 #include <linux/of_platform.h>
12 #include "core.h"
14 #define ALTR_OCRAM_CLEAR_ECC 0x00000018
15 #define ALTR_OCRAM_ECC_EN 0x00000019
17 void socfpga_init_ocram_ecc(void)
19 struct device_node *np;
20 void __iomem *mapped_ocr_edac_addr;
22 /* Find the OCRAM EDAC device tree node */
23 np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
24 if (!np) {
25 pr_err("Unable to find socfpga-ocram-ecc\n");
26 return;
29 mapped_ocr_edac_addr = of_iomap(np, 0);
30 of_node_put(np);
31 if (!mapped_ocr_edac_addr) {
32 pr_err("Unable to map OCRAM ecc regs.\n");
33 return;
36 /* Clear any pending OCRAM ECC interrupts, then enable ECC */
37 writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
38 writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
40 iounmap(mapped_ocr_edac_addr);
43 /* Arria10 OCRAM Section */
44 #define ALTR_A10_ECC_CTRL_OFST 0x08
45 #define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0))
46 #define ALTR_A10_ECC_INITA BIT(16)
48 #define ALTR_A10_ECC_INITSTAT_OFST 0x0C
49 #define ALTR_A10_ECC_INITCOMPLETEA BIT(0)
50 #define ALTR_A10_ECC_INITCOMPLETEB BIT(8)
52 #define ALTR_A10_ECC_ERRINTEN_OFST 0x10
53 #define ALTR_A10_ECC_SERRINTEN BIT(0)
55 #define ALTR_A10_ECC_INTSTAT_OFST 0x20
56 #define ALTR_A10_ECC_SERRPENA BIT(0)
57 #define ALTR_A10_ECC_DERRPENA BIT(8)
58 #define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \
59 ALTR_A10_ECC_DERRPENA)
60 /* ECC Manager Defines */
61 #define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94
62 #define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98
63 #define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1)
65 #define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
67 static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
69 u32 value = readl(ioaddr);
71 value |= bit_mask;
72 writel(value, ioaddr);
75 static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
77 u32 value = readl(ioaddr);
79 value &= ~bit_mask;
80 writel(value, ioaddr);
83 static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
85 u32 value = readl(ioaddr);
87 return (value & bit_mask) ? 1 : 0;
91 * This function uses the memory initialization block in the Arria10 ECC
92 * controller to initialize/clear the entire memory data and ECC data.
94 static int altr_init_memory_port(void __iomem *ioaddr)
96 int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
98 ecc_set_bits(ALTR_A10_ECC_INITA, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
99 while (limit--) {
100 if (ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
101 (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
102 break;
103 udelay(1);
105 if (limit < 0)
106 return -EBUSY;
108 /* Clear any pending ECC interrupts */
109 writel(ALTR_A10_ECC_ERRPENA_MASK,
110 (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
112 return 0;
115 void socfpga_init_arria10_ocram_ecc(void)
117 struct device_node *np;
118 int ret = 0;
119 void __iomem *ecc_block_base;
121 if (!sys_manager_base_addr) {
122 pr_err("SOCFPGA: sys-mgr is not initialized\n");
123 return;
126 /* Find the OCRAM EDAC device tree node */
127 np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
128 if (!np) {
129 pr_err("Unable to find socfpga-a10-ocram-ecc\n");
130 return;
133 /* Map the ECC Block */
134 ecc_block_base = of_iomap(np, 0);
135 of_node_put(np);
136 if (!ecc_block_base) {
137 pr_err("Unable to map OCRAM ECC block\n");
138 return;
141 /* Disable ECC */
142 writel(ALTR_A10_OCRAM_ECC_EN_CTL,
143 sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_SET_OFST);
144 ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
145 (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
146 ecc_clear_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
147 (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
149 /* Ensure all writes complete */
150 wmb();
152 /* Use HW initialization block to initialize memory for ECC */
153 ret = altr_init_memory_port(ecc_block_base);
154 if (ret) {
155 pr_err("ECC: cannot init OCRAM PORTA memory\n");
156 goto exit;
159 /* Enable ECC */
160 ecc_set_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
161 (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
162 ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
163 (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
164 writel(ALTR_A10_OCRAM_ECC_EN_CTL,
165 sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_CLR_OFST);
167 /* Ensure all writes complete */
168 wmb();
169 exit:
170 iounmap(ecc_block_base);