udl-kms: avoid prefetch
[linux/fpc-iii.git] / drivers / net / ethernet / xilinx / xilinx_axienet.h
blobc337400485dad83ee0fd13a1a32c5dd89ac7b64f
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Definitions for Xilinx Axi Ethernet device driver.
5 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
7 */
9 #ifndef XILINX_AXIENET_H
10 #define XILINX_AXIENET_H
12 #include <linux/netdevice.h>
13 #include <linux/spinlock.h>
14 #include <linux/interrupt.h>
15 #include <linux/if_vlan.h>
17 /* Packet size info */
18 #define XAE_HDR_SIZE 14 /* Size of Ethernet header */
19 #define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */
20 #define XAE_MTU 1500 /* Max MTU of an Ethernet frame */
21 #define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */
23 #define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
24 #define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE)
25 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
27 /* Configuration options */
29 /* Accept all incoming packets. Default: disabled (cleared) */
30 #define XAE_OPTION_PROMISC (1 << 0)
32 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
33 #define XAE_OPTION_JUMBO (1 << 1)
35 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */
36 #define XAE_OPTION_VLAN (1 << 2)
38 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */
39 #define XAE_OPTION_FLOW_CONTROL (1 << 4)
41 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
42 * stripped. Default: disabled (set)
44 #define XAE_OPTION_FCS_STRIP (1 << 5)
46 /* Generate FCS field and add PAD automatically for outgoing frames.
47 * Default: enabled (set)
49 #define XAE_OPTION_FCS_INSERT (1 << 6)
51 /* Enable Length/Type error checking for incoming frames. When this option is
52 * set, the MAC will filter frames that have a mismatched type/length field
53 * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
54 * types of frames are encountered. When this option is cleared, the MAC will
55 * allow these types of frames to be received. Default: enabled (set)
57 #define XAE_OPTION_LENTYPE_ERR (1 << 7)
59 /* Enable the transmitter. Default: enabled (set) */
60 #define XAE_OPTION_TXEN (1 << 11)
62 /* Enable the receiver. Default: enabled (set) */
63 #define XAE_OPTION_RXEN (1 << 12)
65 /* Default options set when device is initialized or reset */
66 #define XAE_OPTION_DEFAULTS \
67 (XAE_OPTION_TXEN | \
68 XAE_OPTION_FLOW_CONTROL | \
69 XAE_OPTION_RXEN)
71 /* Axi DMA Register definitions */
73 #define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */
74 #define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */
75 #define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */
76 #define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */
78 #define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */
79 #define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */
80 #define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */
81 #define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */
83 #define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */
84 #define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */
86 #define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */
87 #define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */
88 #define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */
89 #define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */
90 #define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */
91 #define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */
92 #define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */
93 #define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */
94 #define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */
95 #define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */
96 #define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */
97 #define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */
99 #define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */
100 #define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */
101 #define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */
103 #define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */
104 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
105 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
106 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */
108 #define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */
109 #define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */
111 #define XAXIDMA_DELAY_SHIFT 24
112 #define XAXIDMA_COALESCE_SHIFT 16
114 #define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */
115 #define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */
116 #define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */
117 #define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */
119 /* Default TX/RX Threshold and waitbound values for SGDMA mode */
120 #define XAXIDMA_DFT_TX_THRESHOLD 24
121 #define XAXIDMA_DFT_TX_WAITBOUND 254
122 #define XAXIDMA_DFT_RX_THRESHOLD 24
123 #define XAXIDMA_DFT_RX_WAITBOUND 254
125 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
126 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
127 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */
129 #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */
130 #define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */
131 #define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */
132 #define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */
133 #define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */
134 #define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */
135 #define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */
136 #define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */
137 #define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */
139 #define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40
141 /* Axi Ethernet registers definition */
142 #define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */
143 #define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */
144 #define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/
145 #define XAE_IS_OFFSET 0x0000000C /* Interrupt status */
146 #define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */
147 #define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */
148 #define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */
149 #define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */
150 #define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */
151 #define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */
152 #define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */
153 #define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */
154 #define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */
155 #define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */
156 #define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */
157 #define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */
158 #define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */
159 #define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */
160 #define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */
161 #define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */
162 #define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */
163 #define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */
164 #define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */
165 #define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */
166 /* MII Mgmt Interrupt Pending register offset */
167 #define XAE_MDIO_MIP_OFFSET 0x00000620
168 /* MII Management Interrupt Enable register offset */
169 #define XAE_MDIO_MIE_OFFSET 0x00000640
170 /* MII Management Interrupt Clear register offset. */
171 #define XAE_MDIO_MIC_OFFSET 0x00000660
172 #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */
173 #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */
174 #define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */
175 #define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */
176 #define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */
178 #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
179 #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
180 #define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */
182 /* Bit Masks for Axi Ethernet RAF register */
183 /* Reject receive multicast destination address */
184 #define XAE_RAF_MCSTREJ_MASK 0x00000002
185 /* Reject receive broadcast destination address */
186 #define XAE_RAF_BCSTREJ_MASK 0x00000004
187 #define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */
188 #define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */
189 #define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */
190 #define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */
191 #define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */
192 /* Exteneded Multicast Filtering mode */
193 #define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000
194 #define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */
195 #define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */
196 #define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */
197 #define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */
198 #define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/
199 #define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/
201 /* Bit Masks for Axi Ethernet TPF and IFGP registers */
202 #define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */
203 /* Transmit inter-frame gap adjustment value */
204 #define XAE_IFGP0_IFGP_MASK 0x0000007F
206 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
207 * for all 3 registers.
209 /* Hard register access complete */
210 #define XAE_INT_HARDACSCMPLT_MASK 0x00000001
211 /* Auto negotiation complete */
212 #define XAE_INT_AUTONEG_MASK 0x00000002
213 #define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */
214 #define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */
215 #define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */
216 #define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */
217 #define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */
218 #define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */
219 #define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */
220 #define XAE_INT_ALL_MASK 0x0000003F /* All the ints */
222 /* INT bits that indicate receive errors */
223 #define XAE_INT_RECV_ERROR_MASK \
224 (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK)
226 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
227 #define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */
228 #define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */
230 /* Bit masks for Axi Ethernet VLAN TPID Word 1 register */
231 #define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */
232 #define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */
234 /* Bit masks for Axi Ethernet RCW1 register */
235 #define XAE_RCW1_RST_MASK 0x80000000 /* Reset */
236 #define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */
237 /* In-Band FCS enable (FCS not stripped) */
238 #define XAE_RCW1_FCS_MASK 0x20000000
239 #define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */
240 #define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */
241 /* Length/type field valid check disable */
242 #define XAE_RCW1_LT_DIS_MASK 0x02000000
243 /* Control frame Length check disable */
244 #define XAE_RCW1_CL_DIS_MASK 0x01000000
245 /* Pause frame source address bits [47:32]. Bits [31:0] are
246 * stored in register RCW0
248 #define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF
250 /* Bit masks for Axi Ethernet TC register */
251 #define XAE_TC_RST_MASK 0x80000000 /* Reset */
252 #define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */
253 /* In-Band FCS enable (FCS not generated) */
254 #define XAE_TC_FCS_MASK 0x20000000
255 #define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */
256 #define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */
257 /* Inter-frame gap adjustment enable */
258 #define XAE_TC_IFG_MASK 0x02000000
260 /* Bit masks for Axi Ethernet FCC register */
261 #define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */
262 #define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */
264 /* Bit masks for Axi Ethernet EMMC register */
265 #define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */
266 #define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */
267 #define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */
268 #define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */
269 #define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */
270 #define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */
271 #define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */
272 #define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */
273 #define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */
274 #define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */
276 /* Bit masks for Axi Ethernet PHYC register */
277 #define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/
278 #define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */
279 #define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */
280 #define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */
281 #define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */
282 #define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */
283 #define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */
284 #define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */
285 #define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */
286 #define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */
288 /* Bit masks for Axi Ethernet MDIO interface MC register */
289 #define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */
290 #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */
292 /* Bit masks for Axi Ethernet MDIO interface MCR register */
293 #define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */
294 #define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */
295 #define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */
296 #define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */
297 #define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */
298 #define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */
299 #define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */
300 #define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */
301 #define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */
302 #define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */
304 /* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */
305 #define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */
307 /* Bit masks for Axi Ethernet UAW1 register */
308 /* Station address bits [47:32]; Station address
309 * bits [31:0] are stored in register UAW0
311 #define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF
313 /* Bit masks for Axi Ethernet FMI register */
314 #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */
315 #define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */
317 #define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */
319 /* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */
320 #define XAE_PHY_TYPE_MII 0
321 #define XAE_PHY_TYPE_GMII 1
322 #define XAE_PHY_TYPE_RGMII_1_3 2
323 #define XAE_PHY_TYPE_RGMII_2_0 3
324 #define XAE_PHY_TYPE_SGMII 4
325 #define XAE_PHY_TYPE_1000BASE_X 5
327 /* Total number of entries in the hardware multicast table. */
328 #define XAE_MULTICAST_CAM_TABLE_NUM 4
330 /* Axi Ethernet Synthesis features */
331 #define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0)
332 #define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1)
333 #define XAE_FEATURE_FULL_RX_CSUM (1 << 2)
334 #define XAE_FEATURE_FULL_TX_CSUM (1 << 3)
336 #define XAE_NO_CSUM_OFFLOAD 0
338 #define XAE_FULL_CSUM_STATUS_MASK 0x00000038
339 #define XAE_IP_UDP_CSUM_VALIDATED 0x00000003
340 #define XAE_IP_TCP_CSUM_VALIDATED 0x00000002
342 #define DELAY_OF_ONE_MILLISEC 1000
345 * struct axidma_bd - Axi Dma buffer descriptor layout
346 * @next: MM2S/S2MM Next Descriptor Pointer
347 * @reserved1: Reserved and not used
348 * @phys: MM2S/S2MM Buffer Address
349 * @reserved2: Reserved and not used
350 * @reserved3: Reserved and not used
351 * @reserved4: Reserved and not used
352 * @cntrl: MM2S/S2MM Control value
353 * @status: MM2S/S2MM Status value
354 * @app0: MM2S/S2MM User Application Field 0.
355 * @app1: MM2S/S2MM User Application Field 1.
356 * @app2: MM2S/S2MM User Application Field 2.
357 * @app3: MM2S/S2MM User Application Field 3.
358 * @app4: MM2S/S2MM User Application Field 4.
359 * @sw_id_offset: MM2S/S2MM Sw ID
360 * @reserved5: Reserved and not used
361 * @reserved6: Reserved and not used
363 struct axidma_bd {
364 u32 next; /* Physical address of next buffer descriptor */
365 u32 reserved1;
366 u32 phys;
367 u32 reserved2;
368 u32 reserved3;
369 u32 reserved4;
370 u32 cntrl;
371 u32 status;
372 u32 app0;
373 u32 app1; /* TX start << 16 | insert */
374 u32 app2; /* TX csum seed */
375 u32 app3;
376 u32 app4;
377 u32 sw_id_offset;
378 u32 reserved5;
379 u32 reserved6;
383 * struct axienet_local - axienet private per device data
384 * @ndev: Pointer for net_device to which it will be attached.
385 * @dev: Pointer to device structure
386 * @phy_node: Pointer to device node structure
387 * @mii_bus: Pointer to MII bus structure
388 * @regs: Base address for the axienet_local device address space
389 * @dma_regs: Base address for the axidma device address space
390 * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
391 * @tx_irq: Axidma TX IRQ number
392 * @rx_irq: Axidma RX IRQ number
393 * @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
394 * @options: AxiEthernet option word
395 * @last_link: Phy link state in which the PHY was negotiated earlier
396 * @features: Stores the extended features supported by the axienet hw
397 * @tx_bd_v: Virtual address of the TX buffer descriptor ring
398 * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring
399 * @rx_bd_v: Virtual address of the RX buffer descriptor ring
400 * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring
401 * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being
402 * accessed currently. Used while alloc. BDs before a TX starts
403 * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being
404 * accessed currently. Used while processing BDs after the TX
405 * completed.
406 * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being
407 * accessed currently.
408 * @max_frm_size: Stores the maximum size of the frame that can be that
409 * Txed/Rxed in the existing hardware. If jumbo option is
410 * supported, the maximum frame size would be 9k. Else it is
411 * 1522 bytes (assuming support for basic VLAN)
412 * @rxmem: Stores rx memory size for jumbo frame handling.
413 * @csum_offload_on_tx_path: Stores the checksum selection on TX side.
414 * @csum_offload_on_rx_path: Stores the checksum selection on RX side.
415 * @coalesce_count_rx: Store the irq coalesce on RX side.
416 * @coalesce_count_tx: Store the irq coalesce on TX side.
418 struct axienet_local {
419 struct net_device *ndev;
420 struct device *dev;
422 /* Connection to PHY device */
423 struct device_node *phy_node;
425 /* MDIO bus data */
426 struct mii_bus *mii_bus; /* MII bus reference */
428 /* IO registers, dma functions and IRQs */
429 void __iomem *regs;
430 void __iomem *dma_regs;
432 struct tasklet_struct dma_err_tasklet;
434 int tx_irq;
435 int rx_irq;
436 phy_interface_t phy_mode;
438 u32 options; /* Current options word */
439 u32 last_link;
440 u32 features;
442 /* Buffer descriptors */
443 struct axidma_bd *tx_bd_v;
444 dma_addr_t tx_bd_p;
445 struct axidma_bd *rx_bd_v;
446 dma_addr_t rx_bd_p;
447 u32 tx_bd_ci;
448 u32 tx_bd_tail;
449 u32 rx_bd_ci;
451 u32 max_frm_size;
452 u32 rxmem;
454 int csum_offload_on_tx_path;
455 int csum_offload_on_rx_path;
457 u32 coalesce_count_rx;
458 u32 coalesce_count_tx;
462 * struct axiethernet_option - Used to set axi ethernet hardware options
463 * @opt: Option to be set.
464 * @reg: Register offset to be written for setting the option
465 * @m_or: Mask to be ORed for setting the option in the register
467 struct axienet_option {
468 u32 opt;
469 u32 reg;
470 u32 m_or;
474 * axienet_ior - Memory mapped Axi Ethernet register read
475 * @lp: Pointer to axienet local structure
476 * @offset: Address offset from the base address of Axi Ethernet core
478 * Return: The contents of the Axi Ethernet register
480 * This function returns the contents of the corresponding register.
482 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
484 return in_be32(lp->regs + offset);
488 * axienet_iow - Memory mapped Axi Ethernet register write
489 * @lp: Pointer to axienet local structure
490 * @offset: Address offset from the base address of Axi Ethernet core
491 * @value: Value to be written into the Axi Ethernet register
493 * This function writes the desired value into the corresponding Axi Ethernet
494 * register.
496 static inline void axienet_iow(struct axienet_local *lp, off_t offset,
497 u32 value)
499 out_be32((lp->regs + offset), value);
502 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */
503 int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np);
504 int axienet_mdio_wait_until_ready(struct axienet_local *lp);
505 void axienet_mdio_teardown(struct axienet_local *lp);
507 #endif /* XILINX_AXI_ENET_H */