drm/amdkfd: Add memory exception handling

[linux/fpc-iii.git] / drivers / gpu / drm / drm_plane_helper.c

/*
 * Copyright (C) 2014 Intel Corporation
 *
 * DRM universal plane helper functions
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/list.h>
#include <drm/drmP.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_rect.h>
#include <drm/drm_atomic.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic_helper.h>

#define SUBPIXEL_MASK 0xffff

/**
 * DOC: overview
 *
 * This helper library has two parts. The first part has support to implement
 * primary plane support on top of the normal CRTC configuration interface.
 * Since the legacy ->set_config interface ties the primary plane together with
 * the CRTC state this does not allow userspace to disable the primary plane
 * itself.  To avoid too much duplicated code use
 * drm_plane_helper_check_update() which can be used to enforce the same
 * restrictions as primary planes had thus. The default primary plane only
 * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
 * framebuffer.
 *
 * Drivers are highly recommended to implement proper support for primary
 * planes, and newly merged drivers must not rely upon these transitional
 * helpers.
 *
 * The second part also implements transitional helpers which allow drivers to
 * gradually switch to the atomic helper infrastructure for plane updates. Once
 * that switch is complete drivers shouldn't use these any longer, instead using
 * the proper legacy implementations for update and disable plane hooks provided
 * by the atomic helpers.
 *
 * Again drivers are strongly urged to switch to the new interfaces.
 */

/*
 * This is the minimal list of formats that seem to be safe for modeset use
 * with all current DRM drivers.  Most hardware can actually support more
 * formats than this and drivers may specify a more accurate list when
 * creating the primary plane.  However drivers that still call
 * drm_plane_init() will use this minimal format list as the default.
 */
static const uint32_t safe_modeset_formats[] = {
        DRM_FORMAT_XRGB8888,
        DRM_FORMAT_ARGB8888,
};

/*
 * Returns the connectors currently associated with a CRTC.  This function
 * should be called twice:  once with a NULL connector list to retrieve
 * the list size, and once with the properly allocated list to be filled in.
 */
static int get_connectors_for_crtc(struct drm_crtc *crtc,
                                   struct drm_connector **connector_list,
                                   int num_connectors)
{
        struct drm_device *dev = crtc->dev;
        struct drm_connector *connector;
        int count = 0;

        /*
         * Note: Once we change the plane hooks to more fine-grained locking we
         * need to grab the connection_mutex here to be able to make these
         * checks.
         */
        WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));

        list_for_each_entry(connector, &dev->mode_config.connector_list, head)
                if (connector->encoder && connector->encoder->crtc == crtc) {
                        if (connector_list != NULL && count < num_connectors)
                                *(connector_list++) = connector;

                        count++;
                }

        return count;
}

/**
 * drm_plane_helper_check_update() - Check plane update for validity
 * @plane: plane object to update
 * @crtc: owning CRTC of owning plane
 * @fb: framebuffer to flip onto plane
 * @src: source coordinates in 16.16 fixed point
 * @dest: integer destination coordinates
 * @clip: integer clipping coordinates
 * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
 * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
 * @can_position: is it legal to position the plane such that it
 *                doesn't cover the entire crtc?  This will generally
 *                only be false for primary planes.
 * @can_update_disabled: can the plane be updated while the crtc
 *                       is disabled?
 * @visible: output parameter indicating whether plane is still visible after
 *           clipping
 *
 * Checks that a desired plane update is valid.  Drivers that provide
 * their own plane handling rather than helper-provided implementations may
 * still wish to call this function to avoid duplication of error checking
 * code.
 *
 * RETURNS:
 * Zero if update appears valid, error code on failure
 */
int drm_plane_helper_check_update(struct drm_plane *plane,
                                    struct drm_crtc *crtc,
                                    struct drm_framebuffer *fb,
                                    struct drm_rect *src,
                                    struct drm_rect *dest,
                                    const struct drm_rect *clip,
                                    int min_scale,
                                    int max_scale,
                                    bool can_position,
                                    bool can_update_disabled,
                                    bool *visible)
{
        int hscale, vscale;

        if (!fb) {
                *visible = false;
                return 0;
        }

        /* crtc should only be NULL when disabling (i.e., !fb) */
        if (WARN_ON(!crtc)) {
                *visible = false;
                return 0;
        }

        if (!crtc->enabled && !can_update_disabled) {
                DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
                return -EINVAL;
        }

        /* Check scaling */
        hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale);
        vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale);
        if (hscale < 0 || vscale < 0) {
                DRM_DEBUG_KMS("Invalid scaling of plane\n");
                return -ERANGE;
        }

        *visible = drm_rect_clip_scaled(src, dest, clip, hscale, vscale);
        if (!*visible)
                /*
                 * Plane isn't visible; some drivers can handle this
                 * so we just return success here.  Drivers that can't
                 * (including those that use the primary plane helper's
                 * update function) will return an error from their
                 * update_plane handler.
                 */
                return 0;

        if (!can_position && !drm_rect_equals(dest, clip)) {
                DRM_DEBUG_KMS("Plane must cover entire CRTC\n");
                return -EINVAL;
        }

        return 0;
}
EXPORT_SYMBOL(drm_plane_helper_check_update);

/**
 * drm_primary_helper_update() - Helper for primary plane update
 * @plane: plane object to update
 * @crtc: owning CRTC of owning plane
 * @fb: framebuffer to flip onto plane
 * @crtc_x: x offset of primary plane on crtc
 * @crtc_y: y offset of primary plane on crtc
 * @crtc_w: width of primary plane rectangle on crtc
 * @crtc_h: height of primary plane rectangle on crtc
 * @src_x: x offset of @fb for panning
 * @src_y: y offset of @fb for panning
 * @src_w: width of source rectangle in @fb
 * @src_h: height of source rectangle in @fb
 *
 * Provides a default plane update handler for primary planes.  This is handler
 * is called in response to a userspace SetPlane operation on the plane with a
 * non-NULL framebuffer.  We call the driver's modeset handler to update the
 * framebuffer.
 *
 * SetPlane() on a primary plane of a disabled CRTC is not supported, and will
 * return an error.
 *
 * Note that we make some assumptions about hardware limitations that may not be
 * true for all hardware --
 *   1) Primary plane cannot be repositioned.
 *   2) Primary plane cannot be scaled.
 *   3) Primary plane must cover the entire CRTC.
 *   4) Subpixel positioning is not supported.
 * Drivers for hardware that don't have these restrictions can provide their
 * own implementation rather than using this helper.
 *
 * RETURNS:
 * Zero on success, error code on failure
 */
int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
                              struct drm_framebuffer *fb,
                              int crtc_x, int crtc_y,
                              unsigned int crtc_w, unsigned int crtc_h,
                              uint32_t src_x, uint32_t src_y,
                              uint32_t src_w, uint32_t src_h)
{
        struct drm_mode_set set = {
                .crtc = crtc,
                .fb = fb,
                .mode = &crtc->mode,
                .x = src_x >> 16,
                .y = src_y >> 16,
        };
        struct drm_rect src = {
                .x1 = src_x,
                .y1 = src_y,
                .x2 = src_x + src_w,
                .y2 = src_y + src_h,
        };
        struct drm_rect dest = {
                .x1 = crtc_x,
                .y1 = crtc_y,
                .x2 = crtc_x + crtc_w,
                .y2 = crtc_y + crtc_h,
        };
        const struct drm_rect clip = {
                .x2 = crtc->mode.hdisplay,
                .y2 = crtc->mode.vdisplay,
        };
        struct drm_connector **connector_list;
        int num_connectors, ret;
        bool visible;

        ret = drm_plane_helper_check_update(plane, crtc, fb,
                                            &src, &dest, &clip,
                                            DRM_PLANE_HELPER_NO_SCALING,
                                            DRM_PLANE_HELPER_NO_SCALING,
                                            false, false, &visible);
        if (ret)
                return ret;

        if (!visible)
                /*
                 * Primary plane isn't visible.  Note that unless a driver
                 * provides their own disable function, this will just
                 * wind up returning -EINVAL to userspace.
                 */
                return plane->funcs->disable_plane(plane);

        /* Find current connectors for CRTC */
        num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
        BUG_ON(num_connectors == 0);
        connector_list = kzalloc(num_connectors * sizeof(*connector_list),
                                 GFP_KERNEL);
        if (!connector_list)
                return -ENOMEM;
        get_connectors_for_crtc(crtc, connector_list, num_connectors);

        set.connectors = connector_list;
        set.num_connectors = num_connectors;

        /*
         * We call set_config() directly here rather than using
         * drm_mode_set_config_internal.  We're reprogramming the same
         * connectors that were already in use, so we shouldn't need the extra
         * cross-CRTC fb refcounting to accomodate stealing connectors.
         * drm_mode_setplane() already handles the basic refcounting for the
         * framebuffers involved in this operation.
         */
        ret = crtc->funcs->set_config(&set);

        kfree(connector_list);
        return ret;
}
EXPORT_SYMBOL(drm_primary_helper_update);

/**
 * drm_primary_helper_disable() - Helper for primary plane disable
 * @plane: plane to disable
 *
 * Provides a default plane disable handler for primary planes.  This is handler
 * is called in response to a userspace SetPlane operation on the plane with a
 * NULL framebuffer parameter.  It unconditionally fails the disable call with
 * -EINVAL the only way to disable the primary plane without driver support is
 * to disable the entier CRTC. Which does not match the plane ->disable hook.
 *
 * Note that some hardware may be able to disable the primary plane without
 * disabling the whole CRTC.  Drivers for such hardware should provide their
 * own disable handler that disables just the primary plane (and they'll likely
 * need to provide their own update handler as well to properly re-enable a
 * disabled primary plane).
 *
 * RETURNS:
 * Unconditionally returns -EINVAL.
 */
int drm_primary_helper_disable(struct drm_plane *plane)
{
        return -EINVAL;
}
EXPORT_SYMBOL(drm_primary_helper_disable);

/**
 * drm_primary_helper_destroy() - Helper for primary plane destruction
 * @plane: plane to destroy
 *
 * Provides a default plane destroy handler for primary planes.  This handler
 * is called during CRTC destruction.  We disable the primary plane, remove
 * it from the DRM plane list, and deallocate the plane structure.
 */
void drm_primary_helper_destroy(struct drm_plane *plane)
{
        drm_plane_cleanup(plane);
        kfree(plane);
}
EXPORT_SYMBOL(drm_primary_helper_destroy);

const struct drm_plane_funcs drm_primary_helper_funcs = {
        .update_plane = drm_primary_helper_update,
        .disable_plane = drm_primary_helper_disable,
        .destroy = drm_primary_helper_destroy,
};
EXPORT_SYMBOL(drm_primary_helper_funcs);

static struct drm_plane *create_primary_plane(struct drm_device *dev)
{
        struct drm_plane *primary;
        int ret;

        primary = kzalloc(sizeof(*primary), GFP_KERNEL);
        if (primary == NULL) {
                DRM_DEBUG_KMS("Failed to allocate primary plane\n");
                return NULL;
        }

        /*
         * Remove the format_default field from drm_plane when dropping
         * this helper.
         */
        primary->format_default = true;

        /* possible_crtc's will be filled in later by crtc_init */
        ret = drm_universal_plane_init(dev, primary, 0,
                                       &drm_primary_helper_funcs,
                                       safe_modeset_formats,
                                       ARRAY_SIZE(safe_modeset_formats),
                                       DRM_PLANE_TYPE_PRIMARY);
        if (ret) {
                kfree(primary);
                primary = NULL;
        }

        return primary;
}

/**
 * drm_crtc_init - Legacy CRTC initialization function
 * @dev: DRM device
 * @crtc: CRTC object to init
 * @funcs: callbacks for the new CRTC
 *
 * Initialize a CRTC object with a default helper-provided primary plane and no
 * cursor plane.
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
                  const struct drm_crtc_funcs *funcs)
{
        struct drm_plane *primary;

        primary = create_primary_plane(dev);
        return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs);
}
EXPORT_SYMBOL(drm_crtc_init);

int drm_plane_helper_commit(struct drm_plane *plane,
                            struct drm_plane_state *plane_state,
                            struct drm_framebuffer *old_fb)
{
        const struct drm_plane_helper_funcs *plane_funcs;
        struct drm_crtc *crtc[2];
        const struct drm_crtc_helper_funcs *crtc_funcs[2];
        int i, ret = 0;

        plane_funcs = plane->helper_private;

        /* Since this is a transitional helper we can't assume that plane->state
         * is always valid. Hence we need to use plane->crtc instead of
         * plane->state->crtc as the old crtc. */
        crtc[0] = plane->crtc;
        crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL;

        for (i = 0; i < 2; i++)
                crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL;

        if (plane_funcs->atomic_check) {
                ret = plane_funcs->atomic_check(plane, plane_state);
                if (ret)
                        goto out;
        }

        if (plane_funcs->prepare_fb && plane_state->fb &&
            plane_state->fb != old_fb) {
                ret = plane_funcs->prepare_fb(plane, plane_state->fb,
                                              plane_state);
                if (ret)
                        goto out;
        }

        /* Point of no return, commit sw state. */
        swap(plane->state, plane_state);

        for (i = 0; i < 2; i++) {
                if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin)
                        crtc_funcs[i]->atomic_begin(crtc[i]);
        }

        /*
         * Drivers may optionally implement the ->atomic_disable callback, so
         * special-case that here.
         */
        if (drm_atomic_plane_disabling(plane, plane_state) &&
            plane_funcs->atomic_disable)
                plane_funcs->atomic_disable(plane, plane_state);
        else
                plane_funcs->atomic_update(plane, plane_state);

        for (i = 0; i < 2; i++) {
                if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
                        crtc_funcs[i]->atomic_flush(crtc[i]);
        }

        /*
         * If we only moved the plane and didn't change fb's, there's no need to
         * wait for vblank.
         */
        if (plane->state->fb == old_fb)
                goto out;

        for (i = 0; i < 2; i++) {
                if (!crtc[i])
                        continue;

                /* There's no other way to figure out whether the crtc is running. */
                ret = drm_crtc_vblank_get(crtc[i]);
                if (ret == 0) {
                        drm_crtc_wait_one_vblank(crtc[i]);
                        drm_crtc_vblank_put(crtc[i]);
                }

                ret = 0;
        }

        if (plane_funcs->cleanup_fb && old_fb)
                plane_funcs->cleanup_fb(plane, old_fb, plane_state);
out:
        if (plane_state) {
                if (plane->funcs->atomic_destroy_state)
                        plane->funcs->atomic_destroy_state(plane, plane_state);
                else
                        drm_atomic_helper_plane_destroy_state(plane, plane_state);
        }

        return ret;
}

/**
 * drm_plane_helper_update() - Transitional helper for plane update
 * @plane: plane object to update
 * @crtc: owning CRTC of owning plane
 * @fb: framebuffer to flip onto plane
 * @crtc_x: x offset of primary plane on crtc
 * @crtc_y: y offset of primary plane on crtc
 * @crtc_w: width of primary plane rectangle on crtc
 * @crtc_h: height of primary plane rectangle on crtc
 * @src_x: x offset of @fb for panning
 * @src_y: y offset of @fb for panning
 * @src_w: width of source rectangle in @fb
 * @src_h: height of source rectangle in @fb
 *
 * Provides a default plane update handler using the atomic plane update
 * functions. It is fully left to the driver to check plane constraints and
 * handle corner-cases like a fully occluded or otherwise invisible plane.
 *
 * This is useful for piecewise transitioning of a driver to the atomic helpers.
 *
 * RETURNS:
 * Zero on success, error code on failure
 */
int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
                            struct drm_framebuffer *fb,
                            int crtc_x, int crtc_y,
                            unsigned int crtc_w, unsigned int crtc_h,
                            uint32_t src_x, uint32_t src_y,
                            uint32_t src_w, uint32_t src_h)
{
        struct drm_plane_state *plane_state;

        if (plane->funcs->atomic_duplicate_state)
                plane_state = plane->funcs->atomic_duplicate_state(plane);
        else if (plane->state)
                plane_state = drm_atomic_helper_plane_duplicate_state(plane);
        else
                plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL);
        if (!plane_state)
                return -ENOMEM;
        plane_state->plane = plane;

        plane_state->crtc = crtc;
        drm_atomic_set_fb_for_plane(plane_state, fb);
        plane_state->crtc_x = crtc_x;
        plane_state->crtc_y = crtc_y;
        plane_state->crtc_h = crtc_h;
        plane_state->crtc_w = crtc_w;
        plane_state->src_x = src_x;
        plane_state->src_y = src_y;
        plane_state->src_h = src_h;
        plane_state->src_w = src_w;

        return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_update);

/**
 * drm_plane_helper_disable() - Transitional helper for plane disable
 * @plane: plane to disable
 *
 * Provides a default plane disable handler using the atomic plane update
 * functions. It is fully left to the driver to check plane constraints and
 * handle corner-cases like a fully occluded or otherwise invisible plane.
 *
 * This is useful for piecewise transitioning of a driver to the atomic helpers.
 *
 * RETURNS:
 * Zero on success, error code on failure
 */
int drm_plane_helper_disable(struct drm_plane *plane)
{
        struct drm_plane_state *plane_state;

        /* crtc helpers love to call disable functions for already disabled hw
         * functions. So cope with that. */
        if (!plane->crtc)
                return 0;

        if (plane->funcs->atomic_duplicate_state)
                plane_state = plane->funcs->atomic_duplicate_state(plane);
        else if (plane->state)
                plane_state = drm_atomic_helper_plane_duplicate_state(plane);
        else
                plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL);
        if (!plane_state)
                return -ENOMEM;
        plane_state->plane = plane;

        plane_state->crtc = NULL;
        drm_atomic_set_fb_for_plane(plane_state, NULL);

        return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_disable);