?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
net: use symbolic values for ndo_start_xmit() return codes
[linux/fpc-iii.git] / drivers / serial / samsung.c
blob93b5d75db1263eff44696c1b33e0ff23755a9fd2
1 /* linux/drivers/serial/samsuing.c
2 *
3 * Driver core for Samsung SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 /* Hote on 2410 error handling
14 *
15 * The s3c2410 manual has a love/hate affair with the contents of the
16 * UERSTAT register in the UART blocks, and keeps marking some of the
17 * error bits as reserved. Having checked with the s3c2410x01,
18 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
19 * feature from the latter versions of the manual.
20 *
21 * If it becomes aparrent that latter versions of the 2410 remove these
22 * bits, then action will have to be taken to differentiate the versions
23 * and change the policy on BREAK
24 *
25 * BJD, 04-Nov-2004
26 */
27
28 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
29 #define SUPPORT_SYSRQ
30 #endif
31
32 #include <linux/module.h>
33 #include <linux/ioport.h>
34 #include <linux/io.h>
35 #include <linux/platform_device.h>
36 #include <linux/init.h>
37 #include <linux/sysrq.h>
38 #include <linux/console.h>
39 #include <linux/tty.h>
40 #include <linux/tty_flip.h>
41 #include <linux/serial_core.h>
42 #include <linux/serial.h>
43 #include <linux/delay.h>
44 #include <linux/clk.h>
45 #include <linux/cpufreq.h>
46
47 #include <asm/irq.h>
48
49 #include <mach/hardware.h>
50 #include <mach/map.h>
51
52 #include <plat/regs-serial.h>
53
54 #include "samsung.h"
55
56 /* UART name and device definitions */
57
58 #define S3C24XX_SERIAL_NAME "ttySAC"
59 #define S3C24XX_SERIAL_MAJOR 204
60 #define S3C24XX_SERIAL_MINOR 64
61
62 /* macros to change one thing to another */
63
64 #define tx_enabled(port) ((port)->unused[0])
65 #define rx_enabled(port) ((port)->unused[1])
66
67 /* flag to ignore all characters comming in */
68 #define RXSTAT_DUMMY_READ (0x10000000)
69
70 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
71 {
72 return container_of(port, struct s3c24xx_uart_port, port);
73 }
74
75 /* translate a port to the device name */
76
77 static inline const char *s3c24xx_serial_portname(struct uart_port *port)
78 {
79 return to_platform_device(port->dev)->name;
80 }
81
82 static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
83 {
84 return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
85 }
86
87 static void s3c24xx_serial_rx_enable(struct uart_port *port)
88 {
89 unsigned long flags;
90 unsigned int ucon, ufcon;
91 int count = 10000;
92
93 spin_lock_irqsave(&port->lock, flags);
94
95 while (--count && !s3c24xx_serial_txempty_nofifo(port))
96 udelay(100);
97
98 ufcon = rd_regl(port, S3C2410_UFCON);
99 ufcon |= S3C2410_UFCON_RESETRX;
100 wr_regl(port, S3C2410_UFCON, ufcon);
101
102 ucon = rd_regl(port, S3C2410_UCON);
103 ucon |= S3C2410_UCON_RXIRQMODE;
104 wr_regl(port, S3C2410_UCON, ucon);
105
106 rx_enabled(port) = 1;
107 spin_unlock_irqrestore(&port->lock, flags);
108 }
109
110 static void s3c24xx_serial_rx_disable(struct uart_port *port)
111 {
112 unsigned long flags;
113 unsigned int ucon;
114
115 spin_lock_irqsave(&port->lock, flags);
116
117 ucon = rd_regl(port, S3C2410_UCON);
118 ucon &= ~S3C2410_UCON_RXIRQMODE;
119 wr_regl(port, S3C2410_UCON, ucon);
120
121 rx_enabled(port) = 0;
122 spin_unlock_irqrestore(&port->lock, flags);
123 }
124
125 static void s3c24xx_serial_stop_tx(struct uart_port *port)
126 {
127 struct s3c24xx_uart_port *ourport = to_ourport(port);
128
129 if (tx_enabled(port)) {
130 disable_irq_nosync(ourport->tx_irq);
131 tx_enabled(port) = 0;
132 if (port->flags & UPF_CONS_FLOW)
133 s3c24xx_serial_rx_enable(port);
134 }
135 }
136
137 static void s3c24xx_serial_start_tx(struct uart_port *port)
138 {
139 struct s3c24xx_uart_port *ourport = to_ourport(port);
140
141 if (!tx_enabled(port)) {
142 if (port->flags & UPF_CONS_FLOW)
143 s3c24xx_serial_rx_disable(port);
144
145 enable_irq(ourport->tx_irq);
146 tx_enabled(port) = 1;
147 }
148 }
149
150
151 static void s3c24xx_serial_stop_rx(struct uart_port *port)
152 {
153 struct s3c24xx_uart_port *ourport = to_ourport(port);
154
155 if (rx_enabled(port)) {
156 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
157 disable_irq_nosync(ourport->rx_irq);
158 rx_enabled(port) = 0;
159 }
160 }
161
162 static void s3c24xx_serial_enable_ms(struct uart_port *port)
163 {
164 }
165
166 static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
167 {
168 return to_ourport(port)->info;
169 }
170
171 static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
172 {
173 if (port->dev == NULL)
174 return NULL;
175
176 return (struct s3c2410_uartcfg *)port->dev->platform_data;
177 }
178
179 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
180 unsigned long ufstat)
181 {
182 struct s3c24xx_uart_info *info = ourport->info;
183
184 if (ufstat & info->rx_fifofull)
185 return info->fifosize;
186
187 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
188 }
189
190
191 /* ? - where has parity gone?? */
192 #define S3C2410_UERSTAT_PARITY (0x1000)
193
194 static irqreturn_t
195 s3c24xx_serial_rx_chars(int irq, void *dev_id)
196 {
197 struct s3c24xx_uart_port *ourport = dev_id;
198 struct uart_port *port = &ourport->port;
199 struct tty_struct *tty = port->info->port.tty;
200 unsigned int ufcon, ch, flag, ufstat, uerstat;
201 int max_count = 64;
202
203 while (max_count-- > 0) {
204 ufcon = rd_regl(port, S3C2410_UFCON);
205 ufstat = rd_regl(port, S3C2410_UFSTAT);
206
207 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
208 break;
209
210 uerstat = rd_regl(port, S3C2410_UERSTAT);
211 ch = rd_regb(port, S3C2410_URXH);
212
213 if (port->flags & UPF_CONS_FLOW) {
214 int txe = s3c24xx_serial_txempty_nofifo(port);
215
216 if (rx_enabled(port)) {
217 if (!txe) {
218 rx_enabled(port) = 0;
219 continue;
220 }
221 } else {
222 if (txe) {
223 ufcon |= S3C2410_UFCON_RESETRX;
224 wr_regl(port, S3C2410_UFCON, ufcon);
225 rx_enabled(port) = 1;
226 goto out;
227 }
228 continue;
229 }
230 }
231
232 /* insert the character into the buffer */
233
234 flag = TTY_NORMAL;
235 port->icount.rx++;
236
237 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
238 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
239 ch, uerstat);
240
241 /* check for break */
242 if (uerstat & S3C2410_UERSTAT_BREAK) {
243 dbg("break!\n");
244 port->icount.brk++;
245 if (uart_handle_break(port))
246 goto ignore_char;
247 }
248
249 if (uerstat & S3C2410_UERSTAT_FRAME)
250 port->icount.frame++;
251 if (uerstat & S3C2410_UERSTAT_OVERRUN)
252 port->icount.overrun++;
253
254 uerstat &= port->read_status_mask;
255
256 if (uerstat & S3C2410_UERSTAT_BREAK)
257 flag = TTY_BREAK;
258 else if (uerstat & S3C2410_UERSTAT_PARITY)
259 flag = TTY_PARITY;
260 else if (uerstat & (S3C2410_UERSTAT_FRAME |
261 S3C2410_UERSTAT_OVERRUN))
262 flag = TTY_FRAME;
263 }
264
265 if (uart_handle_sysrq_char(port, ch))
266 goto ignore_char;
267
268 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
269 ch, flag);
270
271 ignore_char:
272 continue;
273 }
274 tty_flip_buffer_push(tty);
275
276 out:
277 return IRQ_HANDLED;
278 }
279
280 static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
281 {
282 struct s3c24xx_uart_port *ourport = id;
283 struct uart_port *port = &ourport->port;
284 struct circ_buf *xmit = &port->info->xmit;
285 int count = 256;
286
287 if (port->x_char) {
288 wr_regb(port, S3C2410_UTXH, port->x_char);
289 port->icount.tx++;
290 port->x_char = 0;
291 goto out;
292 }
293
294 /* if there isnt anything more to transmit, or the uart is now
295 * stopped, disable the uart and exit
296 */
297
298 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
299 s3c24xx_serial_stop_tx(port);
300 goto out;
301 }
302
303 /* try and drain the buffer... */
304
305 while (!uart_circ_empty(xmit) && count-- > 0) {
306 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
307 break;
308
309 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
310 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
311 port->icount.tx++;
312 }
313
314 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
315 uart_write_wakeup(port);
316
317 if (uart_circ_empty(xmit))
318 s3c24xx_serial_stop_tx(port);
319
320 out:
321 return IRQ_HANDLED;
322 }
323
324 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
325 {
326 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
327 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
328 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
329
330 if (ufcon & S3C2410_UFCON_FIFOMODE) {
331 if ((ufstat & info->tx_fifomask) != 0 ||
332 (ufstat & info->tx_fifofull))
333 return 0;
334
335 return 1;
336 }
337
338 return s3c24xx_serial_txempty_nofifo(port);
339 }
340
341 /* no modem control lines */
342 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
343 {
344 unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
345
346 if (umstat & S3C2410_UMSTAT_CTS)
347 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
348 else
349 return TIOCM_CAR | TIOCM_DSR;
350 }
351
352 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
353 {
354 /* todo - possibly remove AFC and do manual CTS */
355 }
356
357 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
358 {
359 unsigned long flags;
360 unsigned int ucon;
361
362 spin_lock_irqsave(&port->lock, flags);
363
364 ucon = rd_regl(port, S3C2410_UCON);
365
366 if (break_state)
367 ucon |= S3C2410_UCON_SBREAK;
368 else
369 ucon &= ~S3C2410_UCON_SBREAK;
370
371 wr_regl(port, S3C2410_UCON, ucon);
372
373 spin_unlock_irqrestore(&port->lock, flags);
374 }
375
376 static void s3c24xx_serial_shutdown(struct uart_port *port)
377 {
378 struct s3c24xx_uart_port *ourport = to_ourport(port);
379
380 if (ourport->tx_claimed) {
381 free_irq(ourport->tx_irq, ourport);
382 tx_enabled(port) = 0;
383 ourport->tx_claimed = 0;
384 }
385
386 if (ourport->rx_claimed) {
387 free_irq(ourport->rx_irq, ourport);
388 ourport->rx_claimed = 0;
389 rx_enabled(port) = 0;
390 }
391 }
392
393
394 static int s3c24xx_serial_startup(struct uart_port *port)
395 {
396 struct s3c24xx_uart_port *ourport = to_ourport(port);
397 int ret;
398
399 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
400 port->mapbase, port->membase);
401
402 rx_enabled(port) = 1;
403
404 ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
405 s3c24xx_serial_portname(port), ourport);
406
407 if (ret != 0) {
408 printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
409 return ret;
410 }
411
412 ourport->rx_claimed = 1;
413
414 dbg("requesting tx irq...\n");
415
416 tx_enabled(port) = 1;
417
418 ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
419 s3c24xx_serial_portname(port), ourport);
420
421 if (ret) {
422 printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
423 goto err;
424 }
425
426 ourport->tx_claimed = 1;
427
428 dbg("s3c24xx_serial_startup ok\n");
429
430 /* the port reset code should have done the correct
431 * register setup for the port controls */
432
433 return ret;
434
435 err:
436 s3c24xx_serial_shutdown(port);
437 return ret;
438 }
439
440 /* power power management control */
441
442 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
443 unsigned int old)
444 {
445 struct s3c24xx_uart_port *ourport = to_ourport(port);
446
447 ourport->pm_level = level;
448
449 switch (level) {
450 case 3:
451 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
452 clk_disable(ourport->baudclk);
453
454 clk_disable(ourport->clk);
455 break;
456
457 case 0:
458 clk_enable(ourport->clk);
459
460 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
461 clk_enable(ourport->baudclk);
462
463 break;
464 default:
465 printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
466 }
467 }
468
469 /* baud rate calculation
470 *
471 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
472 * of different sources, including the peripheral clock ("pclk") and an
473 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
474 * with a programmable extra divisor.
475 *
476 * The following code goes through the clock sources, and calculates the
477 * baud clocks (and the resultant actual baud rates) and then tries to
478 * pick the closest one and select that.
479 *
480 */
481
482
483 #define MAX_CLKS (8)
484
485 static struct s3c24xx_uart_clksrc tmp_clksrc = {
486 .name = "pclk",
487 .min_baud = 0,
488 .max_baud = 0,
489 .divisor = 1,
490 };
491
492 static inline int
493 s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
494 {
495 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
496
497 return (info->get_clksrc)(port, c);
498 }
499
500 static inline int
501 s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
502 {
503 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
504
505 return (info->set_clksrc)(port, c);
506 }
507
508 struct baud_calc {
509 struct s3c24xx_uart_clksrc *clksrc;
510 unsigned int calc;
511 unsigned int divslot;
512 unsigned int quot;
513 struct clk *src;
514 };
515
516 static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
517 struct uart_port *port,
518 struct s3c24xx_uart_clksrc *clksrc,
519 unsigned int baud)
520 {
521 struct s3c24xx_uart_port *ourport = to_ourport(port);
522 unsigned long rate;
523
524 calc->src = clk_get(port->dev, clksrc->name);
525 if (calc->src == NULL || IS_ERR(calc->src))
526 return 0;
527
528 rate = clk_get_rate(calc->src);
529 rate /= clksrc->divisor;
530
531 calc->clksrc = clksrc;
532
533 if (ourport->info->has_divslot) {
534 unsigned long div = rate / baud;
535
536 /* The UDIVSLOT register on the newer UARTs allows us to
537 * get a divisor adjustment of 1/16th on the baud clock.
538 *
539 * We don't keep the UDIVSLOT value (the 16ths we calculated
540 * by not multiplying the baud by 16) as it is easy enough
541 * to recalculate.
542 */
543
544 calc->quot = div / 16;
545 calc->calc = rate / div;
546 } else {
547 calc->quot = (rate + (8 * baud)) / (16 * baud);
548 calc->calc = (rate / (calc->quot * 16));
549 }
550
551 calc->quot--;
552 return 1;
553 }
554
555 static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
556 struct s3c24xx_uart_clksrc **clksrc,
557 struct clk **clk,
558 unsigned int baud)
559 {
560 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
561 struct s3c24xx_uart_clksrc *clkp;
562 struct baud_calc res[MAX_CLKS];
563 struct baud_calc *resptr, *best, *sptr;
564 int i;
565
566 clkp = cfg->clocks;
567 best = NULL;
568
569 if (cfg->clocks_size < 2) {
570 if (cfg->clocks_size == 0)
571 clkp = &tmp_clksrc;
572
573 /* check to see if we're sourcing fclk, and if so we're
574 * going to have to update the clock source
575 */
576
577 if (strcmp(clkp->name, "fclk") == 0) {
578 struct s3c24xx_uart_clksrc src;
579
580 s3c24xx_serial_getsource(port, &src);
581
582 /* check that the port already using fclk, and if
583 * not, then re-select fclk
584 */
585
586 if (strcmp(src.name, clkp->name) == 0) {
587 s3c24xx_serial_setsource(port, clkp);
588 s3c24xx_serial_getsource(port, &src);
589 }
590
591 clkp->divisor = src.divisor;
592 }
593
594 s3c24xx_serial_calcbaud(res, port, clkp, baud);
595 best = res;
596 resptr = best + 1;
597 } else {
598 resptr = res;
599
600 for (i = 0; i < cfg->clocks_size; i++, clkp++) {
601 if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
602 resptr++;
603 }
604 }
605
606 /* ok, we now need to select the best clock we found */
607
608 if (!best) {
609 unsigned int deviation = (1<<30)|((1<<30)-1);
610 int calc_deviation;
611
612 for (sptr = res; sptr < resptr; sptr++) {
613 calc_deviation = baud - sptr->calc;
614 if (calc_deviation < 0)
615 calc_deviation = -calc_deviation;
616
617 if (calc_deviation < deviation) {
618 best = sptr;
619 deviation = calc_deviation;
620 }
621 }
622 }
623
624 /* store results to pass back */
625
626 *clksrc = best->clksrc;
627 *clk = best->src;
628
629 return best->quot;
630 }
631
632 /* udivslot_table[]
633 *
634 * This table takes the fractional value of the baud divisor and gives
635 * the recommended setting for the UDIVSLOT register.
636 */
637 static u16 udivslot_table[16] = {
638 [0] = 0x0000,
639 [1] = 0x0080,
640 [2] = 0x0808,
641 [3] = 0x0888,
642 [4] = 0x2222,
643 [5] = 0x4924,
644 [6] = 0x4A52,
645 [7] = 0x54AA,
646 [8] = 0x5555,
647 [9] = 0xD555,
648 [10] = 0xD5D5,
649 [11] = 0xDDD5,
650 [12] = 0xDDDD,
651 [13] = 0xDFDD,
652 [14] = 0xDFDF,
653 [15] = 0xFFDF,
654 };
655
656 static void s3c24xx_serial_set_termios(struct uart_port *port,
657 struct ktermios *termios,
658 struct ktermios *old)
659 {
660 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
661 struct s3c24xx_uart_port *ourport = to_ourport(port);
662 struct s3c24xx_uart_clksrc *clksrc = NULL;
663 struct clk *clk = NULL;
664 unsigned long flags;
665 unsigned int baud, quot;
666 unsigned int ulcon;
667 unsigned int umcon;
668 unsigned int udivslot = 0;
669
670 /*
671 * We don't support modem control lines.
672 */
673 termios->c_cflag &= ~(HUPCL | CMSPAR);
674 termios->c_cflag |= CLOCAL;
675
676 /*
677 * Ask the core to calculate the divisor for us.
678 */
679
680 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
681
682 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
683 quot = port->custom_divisor;
684 else
685 quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
686
687 /* check to see if we need to change clock source */
688
689 if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
690 dbg("selecting clock %p\n", clk);
691 s3c24xx_serial_setsource(port, clksrc);
692
693 if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
694 clk_disable(ourport->baudclk);
695 ourport->baudclk = NULL;
696 }
697
698 clk_enable(clk);
699
700 ourport->clksrc = clksrc;
701 ourport->baudclk = clk;
702 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
703 }
704
705 if (ourport->info->has_divslot) {
706 unsigned int div = ourport->baudclk_rate / baud;
707
708 udivslot = udivslot_table[div & 15];
709 dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
710 }
711
712 switch (termios->c_cflag & CSIZE) {
713 case CS5:
714 dbg("config: 5bits/char\n");
715 ulcon = S3C2410_LCON_CS5;
716 break;
717 case CS6:
718 dbg("config: 6bits/char\n");
719 ulcon = S3C2410_LCON_CS6;
720 break;
721 case CS7:
722 dbg("config: 7bits/char\n");
723 ulcon = S3C2410_LCON_CS7;
724 break;
725 case CS8:
726 default:
727 dbg("config: 8bits/char\n");
728 ulcon = S3C2410_LCON_CS8;
729 break;
730 }
731
732 /* preserve original lcon IR settings */
733 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
734
735 if (termios->c_cflag & CSTOPB)
736 ulcon |= S3C2410_LCON_STOPB;
737
738 umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
739
740 if (termios->c_cflag & PARENB) {
741 if (termios->c_cflag & PARODD)
742 ulcon |= S3C2410_LCON_PODD;
743 else
744 ulcon |= S3C2410_LCON_PEVEN;
745 } else {
746 ulcon |= S3C2410_LCON_PNONE;
747 }
748
749 spin_lock_irqsave(&port->lock, flags);
750
751 dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
752 ulcon, quot, udivslot);
753
754 wr_regl(port, S3C2410_ULCON, ulcon);
755 wr_regl(port, S3C2410_UBRDIV, quot);
756 wr_regl(port, S3C2410_UMCON, umcon);
757
758 if (ourport->info->has_divslot)
759 wr_regl(port, S3C2443_DIVSLOT, udivslot);
760
761 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
762 rd_regl(port, S3C2410_ULCON),
763 rd_regl(port, S3C2410_UCON),
764 rd_regl(port, S3C2410_UFCON));
765
766 /*
767 * Update the per-port timeout.
768 */
769 uart_update_timeout(port, termios->c_cflag, baud);
770
771 /*
772 * Which character status flags are we interested in?
773 */
774 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
775 if (termios->c_iflag & INPCK)
776 port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
777
778 /*
779 * Which character status flags should we ignore?
780 */
781 port->ignore_status_mask = 0;
782 if (termios->c_iflag & IGNPAR)
783 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
784 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
785 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
786
787 /*
788 * Ignore all characters if CREAD is not set.
789 */
790 if ((termios->c_cflag & CREAD) == 0)
791 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
792
793 spin_unlock_irqrestore(&port->lock, flags);
794 }
795
796 static const char *s3c24xx_serial_type(struct uart_port *port)
797 {
798 switch (port->type) {
799 case PORT_S3C2410:
800 return "S3C2410";
801 case PORT_S3C2440:
802 return "S3C2440";
803 case PORT_S3C2412:
804 return "S3C2412";
805 case PORT_S3C6400:
806 return "S3C6400/10";
807 default:
808 return NULL;
809 }
810 }
811
812 #define MAP_SIZE (0x100)
813
814 static void s3c24xx_serial_release_port(struct uart_port *port)
815 {
816 release_mem_region(port->mapbase, MAP_SIZE);
817 }
818
819 static int s3c24xx_serial_request_port(struct uart_port *port)
820 {
821 const char *name = s3c24xx_serial_portname(port);
822 return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
823 }
824
825 static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
826 {
827 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
828
829 if (flags & UART_CONFIG_TYPE &&
830 s3c24xx_serial_request_port(port) == 0)
831 port->type = info->type;
832 }
833
834 /*
835 * verify the new serial_struct (for TIOCSSERIAL).
836 */
837 static int
838 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
839 {
840 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
841
842 if (ser->type != PORT_UNKNOWN && ser->type != info->type)
843 return -EINVAL;
844
845 return 0;
846 }
847
848
849 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
850
851 static struct console s3c24xx_serial_console;
852
853 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
854 #else
855 #define S3C24XX_SERIAL_CONSOLE NULL
856 #endif
857
858 static struct uart_ops s3c24xx_serial_ops = {
859 .pm = s3c24xx_serial_pm,
860 .tx_empty = s3c24xx_serial_tx_empty,
861 .get_mctrl = s3c24xx_serial_get_mctrl,
862 .set_mctrl = s3c24xx_serial_set_mctrl,
863 .stop_tx = s3c24xx_serial_stop_tx,
864 .start_tx = s3c24xx_serial_start_tx,
865 .stop_rx = s3c24xx_serial_stop_rx,
866 .enable_ms = s3c24xx_serial_enable_ms,
867 .break_ctl = s3c24xx_serial_break_ctl,
868 .startup = s3c24xx_serial_startup,
869 .shutdown = s3c24xx_serial_shutdown,
870 .set_termios = s3c24xx_serial_set_termios,
871 .type = s3c24xx_serial_type,
872 .release_port = s3c24xx_serial_release_port,
873 .request_port = s3c24xx_serial_request_port,
874 .config_port = s3c24xx_serial_config_port,
875 .verify_port = s3c24xx_serial_verify_port,
876 };
877
878
879 static struct uart_driver s3c24xx_uart_drv = {
880 .owner = THIS_MODULE,
881 .dev_name = "s3c2410_serial",
882 .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
883 .cons = S3C24XX_SERIAL_CONSOLE,
884 .driver_name = S3C24XX_SERIAL_NAME,
885 .major = S3C24XX_SERIAL_MAJOR,
886 .minor = S3C24XX_SERIAL_MINOR,
887 };
888
889 static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
890 [0] = {
891 .port = {
892 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
893 .iotype = UPIO_MEM,
894 .irq = IRQ_S3CUART_RX0,
895 .uartclk = 0,
896 .fifosize = 16,
897 .ops = &s3c24xx_serial_ops,
898 .flags = UPF_BOOT_AUTOCONF,
899 .line = 0,
900 }
901 },
902 [1] = {
903 .port = {
904 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
905 .iotype = UPIO_MEM,
906 .irq = IRQ_S3CUART_RX1,
907 .uartclk = 0,
908 .fifosize = 16,
909 .ops = &s3c24xx_serial_ops,
910 .flags = UPF_BOOT_AUTOCONF,
911 .line = 1,
912 }
913 },
914 #if CONFIG_SERIAL_SAMSUNG_UARTS > 2
915
916 [2] = {
917 .port = {
918 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
919 .iotype = UPIO_MEM,
920 .irq = IRQ_S3CUART_RX2,
921 .uartclk = 0,
922 .fifosize = 16,
923 .ops = &s3c24xx_serial_ops,
924 .flags = UPF_BOOT_AUTOCONF,
925 .line = 2,
926 }
927 },
928 #endif
929 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
930 [3] = {
931 .port = {
932 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
933 .iotype = UPIO_MEM,
934 .irq = IRQ_S3CUART_RX3,
935 .uartclk = 0,
936 .fifosize = 16,
937 .ops = &s3c24xx_serial_ops,
938 .flags = UPF_BOOT_AUTOCONF,
939 .line = 3,
940 }
941 }
942 #endif
943 };
944
945 /* s3c24xx_serial_resetport
946 *
947 * wrapper to call the specific reset for this port (reset the fifos
948 * and the settings)
949 */
950
951 static inline int s3c24xx_serial_resetport(struct uart_port *port,
952 struct s3c2410_uartcfg *cfg)
953 {
954 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
955
956 return (info->reset_port)(port, cfg);
957 }
958
959
960 #ifdef CONFIG_CPU_FREQ
961
962 static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
963 unsigned long val, void *data)
964 {
965 struct s3c24xx_uart_port *port;
966 struct uart_port *uport;
967
968 port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
969 uport = &port->port;
970
971 /* check to see if port is enabled */
972
973 if (port->pm_level != 0)
974 return 0;
975
976 /* try and work out if the baudrate is changing, we can detect
977 * a change in rate, but we do not have support for detecting
978 * a disturbance in the clock-rate over the change.
979 */
980
981 if (IS_ERR(port->clk))
982 goto exit;
983
984 if (port->baudclk_rate == clk_get_rate(port->clk))
985 goto exit;
986
987 if (val == CPUFREQ_PRECHANGE) {
988 /* we should really shut the port down whilst the
989 * frequency change is in progress. */
990
991 } else if (val == CPUFREQ_POSTCHANGE) {
992 struct ktermios *termios;
993 struct tty_struct *tty;
994
995 if (uport->info == NULL)
996 goto exit;
997
998 tty = uport->info->port.tty;
999
1000 if (tty == NULL)
1001 goto exit;
1002
1003 termios = tty->termios;
1004
1005 if (termios == NULL) {
1006 printk(KERN_WARNING "%s: no termios?\n", __func__);
1007 goto exit;
1008 }
1009
1010 s3c24xx_serial_set_termios(uport, termios, NULL);
1011 }
1012
1013 exit:
1014 return 0;
1015 }
1016
1017 static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1018 {
1019 port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
1020
1021 return cpufreq_register_notifier(&port->freq_transition,
1022 CPUFREQ_TRANSITION_NOTIFIER);
1023 }
1024
1025 static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1026 {
1027 cpufreq_unregister_notifier(&port->freq_transition,
1028 CPUFREQ_TRANSITION_NOTIFIER);
1029 }
1030
1031 #else
1032 static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1033 {
1034 return 0;
1035 }
1036
1037 static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1038 {
1039 }
1040 #endif
1041
1042 /* s3c24xx_serial_init_port
1043 *
1044 * initialise a single serial port from the platform device given
1045 */
1046
1047 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1048 struct s3c24xx_uart_info *info,
1049 struct platform_device *platdev)
1050 {
1051 struct uart_port *port = &ourport->port;
1052 struct s3c2410_uartcfg *cfg;
1053 struct resource *res;
1054 int ret;
1055
1056 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1057
1058 if (platdev == NULL)
1059 return -ENODEV;
1060
1061 cfg = s3c24xx_dev_to_cfg(&platdev->dev);
1062
1063 if (port->mapbase != 0)
1064 return 0;
1065
1066 if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
1067 printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
1068 cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
1069 return -ERANGE;
1070 }
1071
1072 /* setup info for port */
1073 port->dev = &platdev->dev;
1074 ourport->info = info;
1075
1076 /* copy the info in from provided structure */
1077 ourport->port.fifosize = info->fifosize;
1078
1079 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
1080
1081 port->uartclk = 1;
1082
1083 if (cfg->uart_flags & UPF_CONS_FLOW) {
1084 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1085 port->flags |= UPF_CONS_FLOW;
1086 }
1087
1088 /* sort our the physical and virtual addresses for each UART */
1089
1090 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1091 if (res == NULL) {
1092 printk(KERN_ERR "failed to find memory resource for uart\n");
1093 return -EINVAL;
1094 }
1095
1096 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
1097
1098 port->mapbase = res->start;
1099 port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
1100 ret = platform_get_irq(platdev, 0);
1101 if (ret < 0)
1102 port->irq = 0;
1103 else {
1104 port->irq = ret;
1105 ourport->rx_irq = ret;
1106 ourport->tx_irq = ret + 1;
1107 }
1108
1109 ret = platform_get_irq(platdev, 1);
1110 if (ret > 0)
1111 ourport->tx_irq = ret;
1112
1113 ourport->clk = clk_get(&platdev->dev, "uart");
1114
1115 dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
1116 port->mapbase, port->membase, port->irq,
1117 ourport->rx_irq, ourport->tx_irq, port->uartclk);
1118
1119 /* reset the fifos (and setup the uart) */
1120 s3c24xx_serial_resetport(port, cfg);
1121 return 0;
1122 }
1123
1124 static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
1125 struct device_attribute *attr,
1126 char *buf)
1127 {
1128 struct uart_port *port = s3c24xx_dev_to_port(dev);
1129 struct s3c24xx_uart_port *ourport = to_ourport(port);
1130
1131 return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
1132 }
1133
1134 static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
1135
1136 /* Device driver serial port probe */
1137
1138 static int probe_index;
1139
1140 int s3c24xx_serial_probe(struct platform_device *dev,
1141 struct s3c24xx_uart_info *info)
1142 {
1143 struct s3c24xx_uart_port *ourport;
1144 int ret;
1145
1146 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
1147
1148 ourport = &s3c24xx_serial_ports[probe_index];
1149 probe_index++;
1150
1151 dbg("%s: initialising port %p...\n", __func__, ourport);
1152
1153 ret = s3c24xx_serial_init_port(ourport, info, dev);
1154 if (ret < 0)
1155 goto probe_err;
1156
1157 dbg("%s: adding port\n", __func__);
1158 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
1159 platform_set_drvdata(dev, &ourport->port);
1160
1161 ret = device_create_file(&dev->dev, &dev_attr_clock_source);
1162 if (ret < 0)
1163 printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
1164
1165 ret = s3c24xx_serial_cpufreq_register(ourport);
1166 if (ret < 0)
1167 dev_err(&dev->dev, "failed to add cpufreq notifier\n");
1168
1169 return 0;
1170
1171 probe_err:
1172 return ret;
1173 }
1174
1175 EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
1176
1177 int s3c24xx_serial_remove(struct platform_device *dev)
1178 {
1179 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1180
1181 if (port) {
1182 s3c24xx_serial_cpufreq_deregister(to_ourport(port));
1183 device_remove_file(&dev->dev, &dev_attr_clock_source);
1184 uart_remove_one_port(&s3c24xx_uart_drv, port);
1185 }
1186
1187 return 0;
1188 }
1189
1190 EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
1191
1192 /* UART power management code */
1193
1194 #ifdef CONFIG_PM
1195
1196 static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
1197 {
1198 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1199
1200 if (port)
1201 uart_suspend_port(&s3c24xx_uart_drv, port);
1202
1203 return 0;
1204 }
1205
1206 static int s3c24xx_serial_resume(struct platform_device *dev)
1207 {
1208 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1209 struct s3c24xx_uart_port *ourport = to_ourport(port);
1210
1211 if (port) {
1212 clk_enable(ourport->clk);
1213 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1214 clk_disable(ourport->clk);
1215
1216 uart_resume_port(&s3c24xx_uart_drv, port);
1217 }
1218
1219 return 0;
1220 }
1221 #endif
1222
1223 int s3c24xx_serial_init(struct platform_driver *drv,
1224 struct s3c24xx_uart_info *info)
1225 {
1226 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
1227
1228 #ifdef CONFIG_PM
1229 drv->suspend = s3c24xx_serial_suspend;
1230 drv->resume = s3c24xx_serial_resume;
1231 #endif
1232
1233 return platform_driver_register(drv);
1234 }
1235
1236 EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
1237
1238 /* module initialisation code */
1239
1240 static int __init s3c24xx_serial_modinit(void)
1241 {
1242 int ret;
1243
1244 ret = uart_register_driver(&s3c24xx_uart_drv);
1245 if (ret < 0) {
1246 printk(KERN_ERR "failed to register UART driver\n");
1247 return -1;
1248 }
1249
1250 return 0;
1251 }
1252
1253 static void __exit s3c24xx_serial_modexit(void)
1254 {
1255 uart_unregister_driver(&s3c24xx_uart_drv);
1256 }
1257
1258 module_init(s3c24xx_serial_modinit);
1259 module_exit(s3c24xx_serial_modexit);
1260
1261 /* Console code */
1262
1263 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1264
1265 static struct uart_port *cons_uart;
1266
1267 static int
1268 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1269 {
1270 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1271 unsigned long ufstat, utrstat;
1272
1273 if (ufcon & S3C2410_UFCON_FIFOMODE) {
1274 /* fifo mode - check ammount of data in fifo registers... */
1275
1276 ufstat = rd_regl(port, S3C2410_UFSTAT);
1277 return (ufstat & info->tx_fifofull) ? 0 : 1;
1278 }
1279
1280 /* in non-fifo mode, we go and use the tx buffer empty */
1281
1282 utrstat = rd_regl(port, S3C2410_UTRSTAT);
1283 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1284 }
1285
1286 static void
1287 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
1288 {
1289 unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
1290 while (!s3c24xx_serial_console_txrdy(port, ufcon))
1291 barrier();
1292 wr_regb(cons_uart, S3C2410_UTXH, ch);
1293 }
1294
1295 static void
1296 s3c24xx_serial_console_write(struct console *co, const char *s,
1297 unsigned int count)
1298 {
1299 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
1300 }
1301
1302 static void __init
1303 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
1304 int *parity, int *bits)
1305 {
1306 struct s3c24xx_uart_clksrc clksrc;
1307 struct clk *clk;
1308 unsigned int ulcon;
1309 unsigned int ucon;
1310 unsigned int ubrdiv;
1311 unsigned long rate;
1312
1313 ulcon = rd_regl(port, S3C2410_ULCON);
1314 ucon = rd_regl(port, S3C2410_UCON);
1315 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
1316
1317 dbg("s3c24xx_serial_get_options: port=%p\n"
1318 "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
1319 port, ulcon, ucon, ubrdiv);
1320
1321 if ((ucon & 0xf) != 0) {
1322 /* consider the serial port configured if the tx/rx mode set */
1323
1324 switch (ulcon & S3C2410_LCON_CSMASK) {
1325 case S3C2410_LCON_CS5:
1326 *bits = 5;
1327 break;
1328 case S3C2410_LCON_CS6:
1329 *bits = 6;
1330 break;
1331 case S3C2410_LCON_CS7:
1332 *bits = 7;
1333 break;
1334 default:
1335 case S3C2410_LCON_CS8:
1336 *bits = 8;
1337 break;
1338 }
1339
1340 switch (ulcon & S3C2410_LCON_PMASK) {
1341 case S3C2410_LCON_PEVEN:
1342 *parity = 'e';
1343 break;
1344
1345 case S3C2410_LCON_PODD:
1346 *parity = 'o';
1347 break;
1348
1349 case S3C2410_LCON_PNONE:
1350 default:
1351 *parity = 'n';
1352 }
1353
1354 /* now calculate the baud rate */
1355
1356 s3c24xx_serial_getsource(port, &clksrc);
1357
1358 clk = clk_get(port->dev, clksrc.name);
1359 if (!IS_ERR(clk) && clk != NULL)
1360 rate = clk_get_rate(clk) / clksrc.divisor;
1361 else
1362 rate = 1;
1363
1364
1365 *baud = rate / (16 * (ubrdiv + 1));
1366 dbg("calculated baud %d\n", *baud);
1367 }
1368
1369 }
1370
1371 /* s3c24xx_serial_init_ports
1372 *
1373 * initialise the serial ports from the machine provided initialisation
1374 * data.
1375 */
1376
1377 static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
1378 {
1379 struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
1380 struct platform_device **platdev_ptr;
1381 int i;
1382
1383 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1384
1385 platdev_ptr = s3c24xx_uart_devs;
1386
1387 for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
1388 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
1389 }
1390
1391 return 0;
1392 }
1393
1394 static int __init
1395 s3c24xx_serial_console_setup(struct console *co, char *options)
1396 {
1397 struct uart_port *port;
1398 int baud = 9600;
1399 int bits = 8;
1400 int parity = 'n';
1401 int flow = 'n';
1402
1403 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1404 co, co->index, options);
1405
1406 /* is this a valid port */
1407
1408 if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
1409 co->index = 0;
1410
1411 port = &s3c24xx_serial_ports[co->index].port;
1412
1413 /* is the port configured? */
1414
1415 if (port->mapbase == 0x0) {
1416 co->index = 0;
1417 port = &s3c24xx_serial_ports[co->index].port;
1418 }
1419
1420 cons_uart = port;
1421
1422 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1423
1424 /*
1425 * Check whether an invalid uart number has been specified, and
1426 * if so, search for the first available port that does have
1427 * console support.
1428 */
1429 if (options)
1430 uart_parse_options(options, &baud, &parity, &bits, &flow);
1431 else
1432 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
1433
1434 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1435
1436 return uart_set_options(port, co, baud, parity, bits, flow);
1437 }
1438
1439 /* s3c24xx_serial_initconsole
1440 *
1441 * initialise the console from one of the uart drivers
1442 */
1443
1444 static struct console s3c24xx_serial_console = {
1445 .name = S3C24XX_SERIAL_NAME,
1446 .device = uart_console_device,
1447 .flags = CON_PRINTBUFFER,
1448 .index = -1,
1449 .write = s3c24xx_serial_console_write,
1450 .setup = s3c24xx_serial_console_setup
1451 };
1452
1453 int s3c24xx_serial_initconsole(struct platform_driver *drv,
1454 struct s3c24xx_uart_info *info)
1455
1456 {
1457 struct platform_device *dev = s3c24xx_uart_devs[0];
1458
1459 dbg("s3c24xx_serial_initconsole\n");
1460
1461 /* select driver based on the cpu */
1462
1463 if (dev == NULL) {
1464 printk(KERN_ERR "s3c24xx: no devices for console init\n");
1465 return 0;
1466 }
1467
1468 if (strcmp(dev->name, drv->driver.name) != 0)
1469 return 0;
1470
1471 s3c24xx_serial_console.data = &s3c24xx_uart_drv;
1472 s3c24xx_serial_init_ports(info);
1473
1474 register_console(&s3c24xx_serial_console);
1475 return 0;
1476 }
1477
1478 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
1479
1480 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
1481 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
1482 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support