drivers/gpio/gpio-sch311x.c

   1 /*
   2  * GPIO driver for the SMSC SCH311x Super-I/O chips
   3  *
   4  * Copyright (C) 2013 Bruno Randolf <br1@einfach.org>
   5  *
   6  * SuperIO functions and chip detection:
   7  * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  */
  14
  15 #include <linux/ioport.h>
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/gpio/driver.h>
  21 #include <linux/bitops.h>
  22 #include <linux/io.h>
  23
  24 #define DRV_NAME                        "gpio-sch311x"
  25
  26 #define SCH311X_GPIO_CONF_DIR           BIT(0)
  27 #define SCH311X_GPIO_CONF_INVERT        BIT(1)
  28 #define SCH311X_GPIO_CONF_OPEN_DRAIN    BIT(7)
  29
  30 #define SIO_CONFIG_KEY_ENTER            0x55
  31 #define SIO_CONFIG_KEY_EXIT             0xaa
  32
  33 #define GP1                             0x4b
  34
  35 static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e };
  36
  37 static struct platform_device *sch311x_gpio_pdev;
  38
  39 struct sch311x_pdev_data {              /* platform device data */
  40         unsigned short runtime_reg;     /* runtime register base address */
  41 };
  42
  43 struct sch311x_gpio_block {             /* one GPIO block runtime data */
  44         struct gpio_chip chip;
  45         unsigned short data_reg;        /* from definition below */
  46         unsigned short *config_regs;    /* pointer to definition below */
  47         unsigned short runtime_reg;     /* runtime register */
  48         spinlock_t lock;                /* lock for this GPIO block */
  49 };
  50
  51 struct sch311x_gpio_priv {              /* driver private data */
  52         struct sch311x_gpio_block blocks[6];
  53 };
  54
  55 struct sch311x_gpio_block_def {         /* register address definitions */
  56         unsigned short data_reg;
  57         unsigned short config_regs[8];
  58         unsigned short base;
  59 };
  60
  61 /* Note: some GPIOs are not available, these are marked with 0x00 */
  62
  63 static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = {
  64         {
  65                 .data_reg = 0x4b,       /* GP1 */
  66                 .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b},
  67                 .base = 10,
  68         },
  69         {
  70                 .data_reg = 0x4c,       /* GP2 */
  71                 .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32},
  72                 .base = 20,
  73         },
  74         {
  75                 .data_reg = 0x4d,       /* GP3 */
  76                 .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a},
  77                 .base = 30,
  78         },
  79         {
  80                 .data_reg = 0x4e,       /* GP4 */
  81                 .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73},
  82                 .base = 40,
  83         },
  84         {
  85                 .data_reg = 0x4f,       /* GP5 */
  86                 .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46},
  87                 .base = 50,
  88         },
  89         {
  90                 .data_reg = 0x50,       /* GP6 */
  91                 .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59},
  92                 .base = 60,
  93         },
  94 };
  95
  96 /*
  97  *      Super-IO functions
  98  */
  99
 100 static inline int sch311x_sio_enter(int sio_config_port)
 101 {
 102         /* Don't step on other drivers' I/O space by accident. */
 103         if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) {
 104                 pr_err(DRV_NAME "I/O address 0x%04x already in use\n",
 105                        sio_config_port);
 106                 return -EBUSY;
 107         }
 108
 109         outb(SIO_CONFIG_KEY_ENTER, sio_config_port);
 110         return 0;
 111 }
 112
 113 static inline void sch311x_sio_exit(int sio_config_port)
 114 {
 115         outb(SIO_CONFIG_KEY_EXIT, sio_config_port);
 116         release_region(sio_config_port, 2);
 117 }
 118
 119 static inline int sch311x_sio_inb(int sio_config_port, int reg)
 120 {
 121         outb(reg, sio_config_port);
 122         return inb(sio_config_port + 1);
 123 }
 124
 125 static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
 126 {
 127         outb(reg, sio_config_port);
 128         outb(val, sio_config_port + 1);
 129 }
 130
 131
 132 /*
 133  *      GPIO functions
 134  */
 135
 136 static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset)
 137 {
 138         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 139
 140         if (block->config_regs[offset] == 0) /* GPIO is not available */
 141                 return -ENODEV;
 142
 143         if (!request_region(block->runtime_reg + block->config_regs[offset],
 144                             1, DRV_NAME)) {
 145                 dev_err(chip->parent, "Failed to request region 0x%04x.\n",
 146                         block->runtime_reg + block->config_regs[offset]);
 147                 return -EBUSY;
 148         }
 149         return 0;
 150 }
 151
 152 static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset)
 153 {
 154         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 155
 156         if (block->config_regs[offset] == 0) /* GPIO is not available */
 157                 return;
 158
 159         release_region(block->runtime_reg + block->config_regs[offset], 1);
 160 }
 161
 162 static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset)
 163 {
 164         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 165         u8 data;
 166
 167         spin_lock(&block->lock);
 168         data = inb(block->runtime_reg + block->data_reg);
 169         spin_unlock(&block->lock);
 170
 171         return !!(data & BIT(offset));
 172 }
 173
 174 static void __sch311x_gpio_set(struct sch311x_gpio_block *block,
 175                                unsigned offset, int value)
 176 {
 177         u8 data = inb(block->runtime_reg + block->data_reg);
 178         if (value)
 179                 data |= BIT(offset);
 180         else
 181                 data &= ~BIT(offset);
 182         outb(data, block->runtime_reg + block->data_reg);
 183 }
 184
 185 static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset,
 186                              int value)
 187 {
 188         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 189
 190         spin_lock(&block->lock);
 191          __sch311x_gpio_set(block, offset, value);
 192         spin_unlock(&block->lock);
 193 }
 194
 195 static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
 196 {
 197         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 198         u8 data;
 199
 200         spin_lock(&block->lock);
 201         data = inb(block->runtime_reg + block->config_regs[offset]);
 202         data |= SCH311X_GPIO_CONF_DIR;
 203         outb(data, block->runtime_reg + block->config_regs[offset]);
 204         spin_unlock(&block->lock);
 205
 206         return 0;
 207 }
 208
 209 static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
 210                                       int value)
 211 {
 212         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 213         u8 data;
 214
 215         spin_lock(&block->lock);
 216
 217         data = inb(block->runtime_reg + block->config_regs[offset]);
 218         data &= ~SCH311X_GPIO_CONF_DIR;
 219         outb(data, block->runtime_reg + block->config_regs[offset]);
 220         __sch311x_gpio_set(block, offset, value);
 221
 222         spin_unlock(&block->lock);
 223         return 0;
 224 }
 225
 226 static int sch311x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 227 {
 228         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 229         u8 data;
 230
 231         spin_lock(&block->lock);
 232         data = inb(block->runtime_reg + block->config_regs[offset]);
 233         spin_unlock(&block->lock);
 234
 235         return !!(data & SCH311X_GPIO_CONF_DIR);
 236 }
 237
 238 static int sch311x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
 239                                    unsigned long config)
 240 {
 241         struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 242         enum pin_config_param param = pinconf_to_config_param(config);
 243         u8 data;
 244
 245         switch (param) {
 246         case PIN_CONFIG_DRIVE_OPEN_DRAIN:
 247                 spin_lock(&block->lock);
 248                 data = inb(block->runtime_reg + block->config_regs[offset]);
 249                 data |= SCH311X_GPIO_CONF_OPEN_DRAIN;
 250                 outb(data, block->runtime_reg + block->config_regs[offset]);
 251                 spin_unlock(&block->lock);
 252                 return 0;
 253         case PIN_CONFIG_DRIVE_PUSH_PULL:
 254                 spin_lock(&block->lock);
 255                 data = inb(block->runtime_reg + block->config_regs[offset]);
 256                 data &= ~SCH311X_GPIO_CONF_OPEN_DRAIN;
 257                 outb(data, block->runtime_reg + block->config_regs[offset]);
 258                 spin_unlock(&block->lock);
 259                 return 0;
 260         default:
 261                 break;
 262         }
 263         return -ENOTSUPP;
 264 }
 265
 266 static int sch311x_gpio_probe(struct platform_device *pdev)
 267 {
 268         struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev);
 269         struct sch311x_gpio_priv *priv;
 270         struct sch311x_gpio_block *block;
 271         int err, i;
 272
 273         /* we can register all GPIO data registers at once */
 274         if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6,
 275                 DRV_NAME)) {
 276                 dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n",
 277                         pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5);
 278                 return -EBUSY;
 279         }
 280
 281         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 282         if (!priv)
 283                 return -ENOMEM;
 284
 285         platform_set_drvdata(pdev, priv);
 286
 287         for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
 288                 block = &priv->blocks[i];
 289
 290                 spin_lock_init(&block->lock);
 291
 292                 block->chip.label = DRV_NAME;
 293                 block->chip.owner = THIS_MODULE;
 294                 block->chip.request = sch311x_gpio_request;
 295                 block->chip.free = sch311x_gpio_free;
 296                 block->chip.direction_input = sch311x_gpio_direction_in;
 297                 block->chip.direction_output = sch311x_gpio_direction_out;
 298                 block->chip.get_direction = sch311x_gpio_get_direction;
 299                 block->chip.set_config = sch311x_gpio_set_config;
 300                 block->chip.get = sch311x_gpio_get;
 301                 block->chip.set = sch311x_gpio_set;
 302                 block->chip.ngpio = 8;
 303                 block->chip.parent = &pdev->dev;
 304                 block->chip.base = sch311x_gpio_blocks[i].base;
 305                 block->config_regs = sch311x_gpio_blocks[i].config_regs;
 306                 block->data_reg = sch311x_gpio_blocks[i].data_reg;
 307                 block->runtime_reg = pdata->runtime_reg;
 308
 309                 err = gpiochip_add_data(&block->chip, block);
 310                 if (err < 0) {
 311                         dev_err(&pdev->dev,
 312                                 "Could not register gpiochip, %d\n", err);
 313                         goto exit_err;
 314                 }
 315                 dev_info(&pdev->dev,
 316                          "SMSC SCH311x GPIO block %d registered.\n", i);
 317         }
 318
 319         return 0;
 320
 321 exit_err:
 322         /* release already registered chips */
 323         for (--i; i >= 0; i--)
 324                 gpiochip_remove(&priv->blocks[i].chip);
 325         return err;
 326 }
 327
 328 static int sch311x_gpio_remove(struct platform_device *pdev)
 329 {
 330         struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev);
 331         int i;
 332
 333         for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
 334                 gpiochip_remove(&priv->blocks[i].chip);
 335                 dev_info(&pdev->dev,
 336                          "SMSC SCH311x GPIO block %d unregistered.\n", i);
 337         }
 338         return 0;
 339 }
 340
 341 static struct platform_driver sch311x_gpio_driver = {
 342         .driver.name    = DRV_NAME,
 343         .probe          = sch311x_gpio_probe,
 344         .remove         = sch311x_gpio_remove,
 345 };
 346
 347
 348 /*
 349  *      Init & exit routines
 350  */
 351
 352 static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
 353 {
 354         int err = 0, reg;
 355         unsigned short base_addr;
 356         u8 dev_id;
 357
 358         err = sch311x_sio_enter(sio_config_port);
 359         if (err)
 360                 return err;
 361
 362         /* Check device ID. */
 363         reg = sch311x_sio_inb(sio_config_port, 0x20);
 364         switch (reg) {
 365         case 0x7c: /* SCH3112 */
 366                 dev_id = 2;
 367                 break;
 368         case 0x7d: /* SCH3114 */
 369                 dev_id = 4;
 370                 break;
 371         case 0x7f: /* SCH3116 */
 372                 dev_id = 6;
 373                 break;
 374         default:
 375                 err = -ENODEV;
 376                 goto exit;
 377         }
 378
 379         /* Select logical device A (runtime registers) */
 380         sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
 381
 382         /* Check if Logical Device Register is currently active */
 383         if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
 384                 pr_info("Seems that LDN 0x0a is not active...\n");
 385
 386         /* Get the base address of the runtime registers */
 387         base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
 388                            sch311x_sio_inb(sio_config_port, 0x61);
 389         if (!base_addr) {
 390                 pr_err("Base address not set\n");
 391                 err = -ENODEV;
 392                 goto exit;
 393         }
 394         *addr = base_addr;
 395
 396         pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
 397
 398 exit:
 399         sch311x_sio_exit(sio_config_port);
 400         return err;
 401 }
 402
 403 static int __init sch311x_gpio_pdev_add(const unsigned short addr)
 404 {
 405         struct sch311x_pdev_data pdata;
 406         int err;
 407
 408         pdata.runtime_reg = addr;
 409
 410         sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1);
 411         if (!sch311x_gpio_pdev)
 412                 return -ENOMEM;
 413
 414         err = platform_device_add_data(sch311x_gpio_pdev,
 415                                        &pdata, sizeof(pdata));
 416         if (err) {
 417                 pr_err(DRV_NAME "Platform data allocation failed\n");
 418                 goto err;
 419         }
 420
 421         err = platform_device_add(sch311x_gpio_pdev);
 422         if (err) {
 423                 pr_err(DRV_NAME "Device addition failed\n");
 424                 goto err;
 425         }
 426         return 0;
 427
 428 err:
 429         platform_device_put(sch311x_gpio_pdev);
 430         return err;
 431 }
 432
 433 static int __init sch311x_gpio_init(void)
 434 {
 435         int err, i;
 436         unsigned short addr = 0;
 437
 438         for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++)
 439                 if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
 440                         break;
 441
 442         if (!addr)
 443                 return -ENODEV;
 444
 445         err = platform_driver_register(&sch311x_gpio_driver);
 446         if (err)
 447                 return err;
 448
 449         err = sch311x_gpio_pdev_add(addr);
 450         if (err)
 451                 goto unreg_platform_driver;
 452
 453         return 0;
 454
 455 unreg_platform_driver:
 456         platform_driver_unregister(&sch311x_gpio_driver);
 457         return err;
 458 }
 459
 460 static void __exit sch311x_gpio_exit(void)
 461 {
 462         platform_device_unregister(sch311x_gpio_pdev);
 463         platform_driver_unregister(&sch311x_gpio_driver);
 464 }
 465
 466 module_init(sch311x_gpio_init);
 467 module_exit(sch311x_gpio_exit);
 468
 469 MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>");
 470 MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
 471 MODULE_LICENSE("GPL");
 472 MODULE_ALIAS("platform:gpio-sch311x");