arch/arm/mach-omap1/usb.c

   1 /*
   2  * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
   3  *
   4  * Copyright (C) 2004 Texas Instruments, Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/io.h>
  26
  27 #include <asm/irq.h>
  28
  29 #include <mach/mux.h>
  30
  31 #include <mach/usb.h>
  32
  33 #include "common.h"
  34
  35 /* These routines should handle the standard chip-specific modes
  36  * for usb0/1/2 ports, covering basic mux and transceiver setup.
  37  *
  38  * Some board-*.c files will need to set up additional mux options,
  39  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
  40  */
  41
  42 /* TESTED ON:
  43  *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
  44  *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
  45  *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
  46  *  - 1510 Innovator UDC with bundled usb0 cable
  47  *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
  48  *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
  49  *  - 1710 custom development board using alternate pin group
  50  *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
  51  */
  52
  53 #define INT_USB_IRQ_GEN         IH2_BASE + 20
  54 #define INT_USB_IRQ_NISO        IH2_BASE + 30
  55 #define INT_USB_IRQ_ISO         IH2_BASE + 29
  56 #define INT_USB_IRQ_HGEN        INT_USB_HHC_1
  57 #define INT_USB_IRQ_OTG         IH2_BASE + 8
  58
  59 #ifdef  CONFIG_ARCH_OMAP_OTG
  60
  61 void __init
  62 omap_otg_init(struct omap_usb_config *config)
  63 {
  64         u32             syscon;
  65         int             alt_pingroup = 0;
  66
  67         /* NOTE:  no bus or clock setup (yet?) */
  68
  69         syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
  70         if (!(syscon & OTG_RESET_DONE))
  71                 pr_debug("USB resets not complete?\n");
  72
  73         //omap_writew(0, OTG_IRQ_EN);
  74
  75         /* pin muxing and transceiver pinouts */
  76         if (config->pins[0] > 2)        /* alt pingroup 2 */
  77                 alt_pingroup = 1;
  78         syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
  79         syscon |= config->usb1_init(config->pins[1]);
  80         syscon |= config->usb2_init(config->pins[2], alt_pingroup);
  81         pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
  82         omap_writel(syscon, OTG_SYSCON_1);
  83
  84         syscon = config->hmc_mode;
  85         syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
  86 #ifdef  CONFIG_USB_OTG
  87         if (config->otg)
  88                 syscon |= OTG_EN;
  89 #endif
  90         if (cpu_class_is_omap1())
  91                 pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
  92                          omap_readl(USB_TRANSCEIVER_CTRL));
  93         pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
  94         omap_writel(syscon, OTG_SYSCON_2);
  95
  96         printk("USB: hmc %d", config->hmc_mode);
  97         if (!alt_pingroup)
  98                 printk(", usb2 alt %d wires", config->pins[2]);
  99         else if (config->pins[0])
 100                 printk(", usb0 %d wires%s", config->pins[0],
 101                         is_usb0_device(config) ? " (dev)" : "");
 102         if (config->pins[1])
 103                 printk(", usb1 %d wires", config->pins[1]);
 104         if (!alt_pingroup && config->pins[2])
 105                 printk(", usb2 %d wires", config->pins[2]);
 106         if (config->otg)
 107                 printk(", Mini-AB on usb%d", config->otg - 1);
 108         printk("\n");
 109
 110         if (cpu_class_is_omap1()) {
 111                 u16 w;
 112
 113                 /* leave USB clocks/controllers off until needed */
 114                 w = omap_readw(ULPD_SOFT_REQ);
 115                 w &= ~SOFT_USB_CLK_REQ;
 116                 omap_writew(w, ULPD_SOFT_REQ);
 117
 118                 w = omap_readw(ULPD_CLOCK_CTRL);
 119                 w &= ~USB_MCLK_EN;
 120                 w |= DIS_USB_PVCI_CLK;
 121                 omap_writew(w, ULPD_CLOCK_CTRL);
 122         }
 123         syscon = omap_readl(OTG_SYSCON_1);
 124         syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 125
 126 #if IS_ENABLED(CONFIG_USB_OMAP)
 127         if (config->otg || config->register_dev) {
 128                 struct platform_device *udc_device = config->udc_device;
 129                 int status;
 130
 131                 syscon &= ~DEV_IDLE_EN;
 132                 udc_device->dev.platform_data = config;
 133                 status = platform_device_register(udc_device);
 134                 if (status)
 135                         pr_debug("can't register UDC device, %d\n", status);
 136         }
 137 #endif
 138
 139 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 140         if (config->otg || config->register_host) {
 141                 struct platform_device *ohci_device = config->ohci_device;
 142                 int status;
 143
 144                 syscon &= ~HST_IDLE_EN;
 145                 ohci_device->dev.platform_data = config;
 146                 status = platform_device_register(ohci_device);
 147                 if (status)
 148                         pr_debug("can't register OHCI device, %d\n", status);
 149         }
 150 #endif
 151
 152 #ifdef  CONFIG_USB_OTG
 153         if (config->otg) {
 154                 struct platform_device *otg_device = config->otg_device;
 155                 int status;
 156
 157                 syscon &= ~OTG_IDLE_EN;
 158                 otg_device->dev.platform_data = config;
 159                 status = platform_device_register(otg_device);
 160                 if (status)
 161                         pr_debug("can't register OTG device, %d\n", status);
 162         }
 163 #endif
 164         pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 165         omap_writel(syscon, OTG_SYSCON_1);
 166 }
 167
 168 #else
 169 void omap_otg_init(struct omap_usb_config *config) {}
 170 #endif
 171
 172 #if IS_ENABLED(CONFIG_USB_OMAP)
 173
 174 static struct resource udc_resources[] = {
 175         /* order is significant! */
 176         {               /* registers */
 177                 .start          = UDC_BASE,
 178                 .end            = UDC_BASE + 0xff,
 179                 .flags          = IORESOURCE_MEM,
 180         }, {            /* general IRQ */
 181                 .start          = INT_USB_IRQ_GEN,
 182                 .flags          = IORESOURCE_IRQ,
 183         }, {            /* PIO IRQ */
 184                 .start          = INT_USB_IRQ_NISO,
 185                 .flags          = IORESOURCE_IRQ,
 186         }, {            /* SOF IRQ */
 187                 .start          = INT_USB_IRQ_ISO,
 188                 .flags          = IORESOURCE_IRQ,
 189         },
 190 };
 191
 192 static u64 udc_dmamask = ~(u32)0;
 193
 194 static struct platform_device udc_device = {
 195         .name           = "omap_udc",
 196         .id             = -1,
 197         .dev = {
 198                 .dma_mask               = &udc_dmamask,
 199                 .coherent_dma_mask      = 0xffffffff,
 200         },
 201         .num_resources  = ARRAY_SIZE(udc_resources),
 202         .resource       = udc_resources,
 203 };
 204
 205 static inline void udc_device_init(struct omap_usb_config *pdata)
 206 {
 207         /* IRQ numbers for omap7xx */
 208         if(cpu_is_omap7xx()) {
 209                 udc_resources[1].start = INT_7XX_USB_GENI;
 210                 udc_resources[2].start = INT_7XX_USB_NON_ISO;
 211                 udc_resources[3].start = INT_7XX_USB_ISO;
 212         }
 213         pdata->udc_device = &udc_device;
 214 }
 215
 216 #else
 217
 218 static inline void udc_device_init(struct omap_usb_config *pdata)
 219 {
 220 }
 221
 222 #endif
 223
 224 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 225
 226 /* The dmamask must be set for OHCI to work */
 227 static u64 ohci_dmamask = ~(u32)0;
 228
 229 static struct resource ohci_resources[] = {
 230         {
 231                 .start  = OMAP_OHCI_BASE,
 232                 .end    = OMAP_OHCI_BASE + 0xff,
 233                 .flags  = IORESOURCE_MEM,
 234         },
 235         {
 236                 .start  = INT_USB_IRQ_HGEN,
 237                 .flags  = IORESOURCE_IRQ,
 238         },
 239 };
 240
 241 static struct platform_device ohci_device = {
 242         .name                   = "ohci",
 243         .id                     = -1,
 244         .dev = {
 245                 .dma_mask               = &ohci_dmamask,
 246                 .coherent_dma_mask      = 0xffffffff,
 247         },
 248         .num_resources  = ARRAY_SIZE(ohci_resources),
 249         .resource               = ohci_resources,
 250 };
 251
 252 static inline void ohci_device_init(struct omap_usb_config *pdata)
 253 {
 254         if (cpu_is_omap7xx())
 255                 ohci_resources[1].start = INT_7XX_USB_HHC_1;
 256         pdata->ohci_device = &ohci_device;
 257         pdata->ocpi_enable = &ocpi_enable;
 258 }
 259
 260 #else
 261
 262 static inline void ohci_device_init(struct omap_usb_config *pdata)
 263 {
 264 }
 265
 266 #endif
 267
 268 #if     defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 269
 270 static struct resource otg_resources[] = {
 271         /* order is significant! */
 272         {
 273                 .start          = OTG_BASE,
 274                 .end            = OTG_BASE + 0xff,
 275                 .flags          = IORESOURCE_MEM,
 276         }, {
 277                 .start          = INT_USB_IRQ_OTG,
 278                 .flags          = IORESOURCE_IRQ,
 279         },
 280 };
 281
 282 static struct platform_device otg_device = {
 283         .name           = "omap_otg",
 284         .id             = -1,
 285         .num_resources  = ARRAY_SIZE(otg_resources),
 286         .resource       = otg_resources,
 287 };
 288
 289 static inline void otg_device_init(struct omap_usb_config *pdata)
 290 {
 291         if (cpu_is_omap7xx())
 292                 otg_resources[1].start = INT_7XX_USB_OTG;
 293         pdata->otg_device = &otg_device;
 294 }
 295
 296 #else
 297
 298 static inline void otg_device_init(struct omap_usb_config *pdata)
 299 {
 300 }
 301
 302 #endif
 303
 304 static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 305 {
 306         u32     syscon1 = 0;
 307
 308         if (nwires == 0) {
 309                 if (!cpu_is_omap15xx()) {
 310                         u32 l;
 311
 312                         /* pulldown D+/D- */
 313                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 314                         l &= ~(3 << 1);
 315                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 316                 }
 317                 return 0;
 318         }
 319
 320         if (is_device) {
 321                 if (cpu_is_omap7xx()) {
 322                         omap_cfg_reg(AA17_7XX_USB_DM);
 323                         omap_cfg_reg(W16_7XX_USB_PU_EN);
 324                         omap_cfg_reg(W17_7XX_USB_VBUSI);
 325                         omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
 326                         omap_cfg_reg(W19_7XX_USB_DCRST);
 327                 } else
 328                         omap_cfg_reg(W4_USB_PUEN);
 329         }
 330
 331         if (nwires == 2) {
 332                 u32 l;
 333
 334                 // omap_cfg_reg(P9_USB_DP);
 335                 // omap_cfg_reg(R8_USB_DM);
 336
 337                 if (cpu_is_omap15xx()) {
 338                         /* This works on 1510-Innovator */
 339                         return 0;
 340                 }
 341
 342                 /* NOTES:
 343                  *  - peripheral should configure VBUS detection!
 344                  *  - only peripherals may use the internal D+/D- pulldowns
 345                  *  - OTG support on this port not yet written
 346                  */
 347
 348                 /* Don't do this for omap7xx -- it causes USB to not work correctly */
 349                 if (!cpu_is_omap7xx()) {
 350                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 351                         l &= ~(7 << 4);
 352                         if (!is_device)
 353                                 l |= (3 << 1);
 354                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 355                 }
 356
 357                 return 3 << 16;
 358         }
 359
 360         /* alternate pin config, external transceiver */
 361         if (cpu_is_omap15xx()) {
 362                 printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
 363                 return 0;
 364         }
 365
 366         omap_cfg_reg(V6_USB0_TXD);
 367         omap_cfg_reg(W9_USB0_TXEN);
 368         omap_cfg_reg(W5_USB0_SE0);
 369         if (nwires != 3)
 370                 omap_cfg_reg(Y5_USB0_RCV);
 371
 372         /* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
 373          * may be able to use I2C requests to set those bits along
 374          * with VBUS switching and overcurrent detection.
 375          */
 376
 377         if (nwires != 6) {
 378                 u32 l;
 379
 380                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 381                 l &= ~CONF_USB2_UNI_R;
 382                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 383         }
 384
 385         switch (nwires) {
 386         case 3:
 387                 syscon1 = 2;
 388                 break;
 389         case 4:
 390                 syscon1 = 1;
 391                 break;
 392         case 6:
 393                 syscon1 = 3;
 394                 {
 395                         u32 l;
 396
 397                         omap_cfg_reg(AA9_USB0_VP);
 398                         omap_cfg_reg(R9_USB0_VM);
 399                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 400                         l |= CONF_USB2_UNI_R;
 401                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 402                 }
 403                 break;
 404         default:
 405                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 406                         0, nwires);
 407         }
 408
 409         return syscon1 << 16;
 410 }
 411
 412 static u32 __init omap1_usb1_init(unsigned nwires)
 413 {
 414         u32     syscon1 = 0;
 415
 416         if (!cpu_is_omap15xx() && nwires != 6) {
 417                 u32 l;
 418
 419                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 420                 l &= ~CONF_USB1_UNI_R;
 421                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 422         }
 423         if (nwires == 0)
 424                 return 0;
 425
 426         /* external transceiver */
 427         omap_cfg_reg(USB1_TXD);
 428         omap_cfg_reg(USB1_TXEN);
 429         if (nwires != 3)
 430                 omap_cfg_reg(USB1_RCV);
 431
 432         if (cpu_is_omap15xx()) {
 433                 omap_cfg_reg(USB1_SEO);
 434                 omap_cfg_reg(USB1_SPEED);
 435                 // SUSP
 436         } else if (cpu_is_omap1610() || cpu_is_omap5912()) {
 437                 omap_cfg_reg(W13_1610_USB1_SE0);
 438                 omap_cfg_reg(R13_1610_USB1_SPEED);
 439                 // SUSP
 440         } else if (cpu_is_omap1710()) {
 441                 omap_cfg_reg(R13_1710_USB1_SE0);
 442                 // SUSP
 443         } else {
 444                 pr_debug("usb%d cpu unrecognized\n", 1);
 445                 return 0;
 446         }
 447
 448         switch (nwires) {
 449         case 2:
 450                 goto bad;
 451         case 3:
 452                 syscon1 = 2;
 453                 break;
 454         case 4:
 455                 syscon1 = 1;
 456                 break;
 457         case 6:
 458                 syscon1 = 3;
 459                 omap_cfg_reg(USB1_VP);
 460                 omap_cfg_reg(USB1_VM);
 461                 if (!cpu_is_omap15xx()) {
 462                         u32 l;
 463
 464                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 465                         l |= CONF_USB1_UNI_R;
 466                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 467                 }
 468                 break;
 469         default:
 470 bad:
 471                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 472                         1, nwires);
 473         }
 474
 475         return syscon1 << 20;
 476 }
 477
 478 static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 479 {
 480         u32     syscon1 = 0;
 481
 482         /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
 483         if (alt_pingroup || nwires == 0)
 484                 return 0;
 485
 486         if (!cpu_is_omap15xx() && nwires != 6) {
 487                 u32 l;
 488
 489                 l = omap_readl(USB_TRANSCEIVER_CTRL);
 490                 l &= ~CONF_USB2_UNI_R;
 491                 omap_writel(l, USB_TRANSCEIVER_CTRL);
 492         }
 493
 494         /* external transceiver */
 495         if (cpu_is_omap15xx()) {
 496                 omap_cfg_reg(USB2_TXD);
 497                 omap_cfg_reg(USB2_TXEN);
 498                 omap_cfg_reg(USB2_SEO);
 499                 if (nwires != 3)
 500                         omap_cfg_reg(USB2_RCV);
 501                 /* there is no USB2_SPEED */
 502         } else if (cpu_is_omap16xx()) {
 503                 omap_cfg_reg(V6_USB2_TXD);
 504                 omap_cfg_reg(W9_USB2_TXEN);
 505                 omap_cfg_reg(W5_USB2_SE0);
 506                 if (nwires != 3)
 507                         omap_cfg_reg(Y5_USB2_RCV);
 508                 // FIXME omap_cfg_reg(USB2_SPEED);
 509         } else {
 510                 pr_debug("usb%d cpu unrecognized\n", 1);
 511                 return 0;
 512         }
 513
 514         // omap_cfg_reg(USB2_SUSP);
 515
 516         switch (nwires) {
 517         case 2:
 518                 goto bad;
 519         case 3:
 520                 syscon1 = 2;
 521                 break;
 522         case 4:
 523                 syscon1 = 1;
 524                 break;
 525         case 5:
 526                 goto bad;
 527         case 6:
 528                 syscon1 = 3;
 529                 if (cpu_is_omap15xx()) {
 530                         omap_cfg_reg(USB2_VP);
 531                         omap_cfg_reg(USB2_VM);
 532                 } else {
 533                         u32 l;
 534
 535                         omap_cfg_reg(AA9_USB2_VP);
 536                         omap_cfg_reg(R9_USB2_VM);
 537                         l = omap_readl(USB_TRANSCEIVER_CTRL);
 538                         l |= CONF_USB2_UNI_R;
 539                         omap_writel(l, USB_TRANSCEIVER_CTRL);
 540                 }
 541                 break;
 542         default:
 543 bad:
 544                 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 545                         2, nwires);
 546         }
 547
 548         return syscon1 << 24;
 549 }
 550
 551 #ifdef  CONFIG_ARCH_OMAP15XX
 552
 553 /* ULPD_DPLL_CTRL */
 554 #define DPLL_IOB                (1 << 13)
 555 #define DPLL_PLL_ENABLE         (1 << 4)
 556 #define DPLL_LOCK               (1 << 0)
 557
 558 /* ULPD_APLL_CTRL */
 559 #define APLL_NDPLL_SWITCH       (1 << 0)
 560
 561 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 562 {
 563         unsigned int val;
 564         u16 w;
 565
 566         config->usb0_init(config->pins[0], is_usb0_device(config));
 567         config->usb1_init(config->pins[1]);
 568         config->usb2_init(config->pins[2], 0);
 569
 570         val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
 571         val |= (config->hmc_mode << 1);
 572         omap_writel(val, MOD_CONF_CTRL_0);
 573
 574         printk("USB: hmc %d", config->hmc_mode);
 575         if (config->pins[0])
 576                 printk(", usb0 %d wires%s", config->pins[0],
 577                         is_usb0_device(config) ? " (dev)" : "");
 578         if (config->pins[1])
 579                 printk(", usb1 %d wires", config->pins[1]);
 580         if (config->pins[2])
 581                 printk(", usb2 %d wires", config->pins[2]);
 582         printk("\n");
 583
 584         /* use DPLL for 48 MHz function clock */
 585         pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
 586                         omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
 587
 588         w = omap_readw(ULPD_APLL_CTRL);
 589         w &= ~APLL_NDPLL_SWITCH;
 590         omap_writew(w, ULPD_APLL_CTRL);
 591
 592         w = omap_readw(ULPD_DPLL_CTRL);
 593         w |= DPLL_IOB | DPLL_PLL_ENABLE;
 594         omap_writew(w, ULPD_DPLL_CTRL);
 595
 596         w = omap_readw(ULPD_SOFT_REQ);
 597         w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
 598         omap_writew(w, ULPD_SOFT_REQ);
 599
 600         while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
 601                 cpu_relax();
 602
 603 #if IS_ENABLED(CONFIG_USB_OMAP)
 604         if (config->register_dev) {
 605                 int status;
 606
 607                 udc_device.dev.platform_data = config;
 608                 status = platform_device_register(&udc_device);
 609                 if (status)
 610                         pr_debug("can't register UDC device, %d\n", status);
 611                 /* udc driver gates 48MHz by D+ pullup */
 612         }
 613 #endif
 614
 615 #if     defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 616         if (config->register_host) {
 617                 int status;
 618
 619                 ohci_device.dev.platform_data = config;
 620                 status = platform_device_register(&ohci_device);
 621                 if (status)
 622                         pr_debug("can't register OHCI device, %d\n", status);
 623                 /* hcd explicitly gates 48MHz */
 624         }
 625 #endif
 626 }
 627
 628 #else
 629 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 630 #endif
 631
 632 void __init omap1_usb_init(struct omap_usb_config *_pdata)
 633 {
 634         struct omap_usb_config *pdata;
 635
 636         pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
 637         if (!pdata)
 638                 return;
 639
 640         pdata->usb0_init = omap1_usb0_init;
 641         pdata->usb1_init = omap1_usb1_init;
 642         pdata->usb2_init = omap1_usb2_init;
 643         udc_device_init(pdata);
 644         ohci_device_init(pdata);
 645         otg_device_init(pdata);
 646
 647         if (cpu_is_omap7xx() || cpu_is_omap16xx())
 648                 omap_otg_init(pdata);
 649         else if (cpu_is_omap15xx())
 650                 omap_1510_usb_init(pdata);
 651         else
 652                 printk(KERN_ERR "USB: No init for your chip yet\n");
 653 }