staging: rtl8192u: remove redundant assignment to pointer crypt
[linux/fpc-iii.git] / arch / arm64 / boot / dts / exynos / exynos5433-tm2-common.dtsi
blob6f90b0e62cba619caf6a6744dfc206bde73d438c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * SAMSUNG Exynos5433 TM2 board device tree source
4  *
5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6  *
7  * Common device tree source file for Samsung's TM2 and TM2E boards
8  * which are based on Samsung Exynos5433 SoC.
9  */
11 /dts-v1/;
12 #include "exynos5433.dtsi"
13 #include <dt-bindings/clock/samsung,s2mps11.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/sound/samsung-i2s.h>
19 / {
20         aliases {
21                 gsc0 = &gsc_0;
22                 gsc1 = &gsc_1;
23                 gsc2 = &gsc_2;
24                 pinctrl0 = &pinctrl_alive;
25                 pinctrl1 = &pinctrl_aud;
26                 pinctrl2 = &pinctrl_cpif;
27                 pinctrl3 = &pinctrl_ese;
28                 pinctrl4 = &pinctrl_finger;
29                 pinctrl5 = &pinctrl_fsys;
30                 pinctrl6 = &pinctrl_imem;
31                 pinctrl7 = &pinctrl_nfc;
32                 pinctrl8 = &pinctrl_peric;
33                 pinctrl9 = &pinctrl_touch;
34                 serial0 = &serial_0;
35                 serial1 = &serial_1;
36                 serial2 = &serial_2;
37                 serial3 = &serial_3;
38                 spi0 = &spi_0;
39                 spi1 = &spi_1;
40                 spi2 = &spi_2;
41                 spi3 = &spi_3;
42                 spi4 = &spi_4;
43                 mshc0 = &mshc_0;
44                 mshc2 = &mshc_2;
45         };
47         chosen {
48                 stdout-path = &serial_1;
49         };
51         memory@20000000 {
52                 device_type = "memory";
53                 reg = <0x0 0x20000000 0x0 0xc0000000>;
54         };
56         gpio-keys {
57                 compatible = "gpio-keys";
59                 power-key {
60                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
61                         linux,code = <KEY_POWER>;
62                         label = "power key";
63                         debounce-interval = <10>;
64                 };
66                 volume-up-key {
67                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
68                         linux,code = <KEY_VOLUMEUP>;
69                         label = "volume-up key";
70                         debounce-interval = <10>;
71                 };
73                 volume-down-key {
74                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
75                         linux,code = <KEY_VOLUMEDOWN>;
76                         label = "volume-down key";
77                         debounce-interval = <10>;
78                 };
80                 homepage-key {
81                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
82                         linux,code = <KEY_MENU>;
83                         label = "homepage key";
84                         debounce-interval = <10>;
85                 };
86         };
88         i2c_max98504: i2c-gpio-0 {
89                 compatible = "i2c-gpio";
90                 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
91                          &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
92                 i2c-gpio,delay-us = <2>;
93                 #address-cells = <1>;
94                 #size-cells = <0>;
95                 status = "okay";
97                 max98504: max98504@31 {
98                         compatible = "maxim,max98504";
99                         reg = <0x31>;
100                         maxim,rx-path = <1>;
101                         maxim,tx-path = <1>;
102                         maxim,tx-channel-mask = <3>;
103                         maxim,tx-channel-source = <2>;
104                 };
105         };
107         irda_regulator: irda-regulator {
108                 compatible = "regulator-fixed";
109                 enable-active-high;
110                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
111                 regulator-name = "irda_regulator";
112         };
114         sound {
115                 compatible = "samsung,tm2-audio";
116                 audio-codec = <&wm5110>, <&hdmi>;
117                 i2s-controller = <&i2s0 0>, <&i2s1 0>;
118                 audio-amplifier = <&max98504>;
119                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
120                 model = "wm5110";
121                 samsung,audio-routing =
122                         /* Headphone */
123                         "HP", "HPOUT1L",
124                         "HP", "HPOUT1R",
126                         /* Speaker */
127                         "SPK", "SPKOUT",
128                         "SPKOUT", "HPOUT2L",
129                         "SPKOUT", "HPOUT2R",
131                         /* Receiver */
132                         "RCV", "HPOUT3L",
133                         "RCV", "HPOUT3R";
134                 status = "okay";
135         };
138 &adc {
139         vdd-supply = <&ldo3_reg>;
140         status = "okay";
142         thermistor-ap {
143                 compatible = "murata,ncp03wf104";
144                 pullup-uv = <1800000>;
145                 pullup-ohm = <100000>;
146                 pulldown-ohm = <0>;
147                 io-channels = <&adc 0>;
148         };
150         thermistor-battery {
151                 compatible = "murata,ncp03wf104";
152                 pullup-uv = <1800000>;
153                 pullup-ohm = <100000>;
154                 pulldown-ohm = <0>;
155                 io-channels = <&adc 1>;
156                 #thermal-sensor-cells = <0>;
157         };
159         thermistor-charger {
160                 compatible = "murata,ncp03wf104";
161                 pullup-uv = <1800000>;
162                 pullup-ohm = <100000>;
163                 pulldown-ohm = <0>;
164                 io-channels = <&adc 2>;
165         };
168 &bus_g2d_400 {
169         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
170         vdd-supply = <&buck4_reg>;
171         exynos,saturation-ratio = <10>;
172         status = "okay";
175 &bus_g2d_266 {
176         devfreq = <&bus_g2d_400>;
177         status = "okay";
180 &bus_gscl {
181         devfreq = <&bus_g2d_400>;
182         status = "okay";
185 &bus_hevc {
186         devfreq = <&bus_g2d_400>;
187         status = "okay";
190 &bus_jpeg {
191         devfreq = <&bus_g2d_400>;
192         status = "okay";
195 &bus_mfc {
196         devfreq = <&bus_g2d_400>;
197         status = "okay";
200 &bus_mscl {
201         devfreq = <&bus_g2d_400>;
202         status = "okay";
205 &bus_noc0 {
206         devfreq = <&bus_g2d_400>;
207         status = "okay";
210 &bus_noc1 {
211         devfreq = <&bus_g2d_400>;
212         status = "okay";
215 &bus_noc2 {
216         devfreq = <&bus_g2d_400>;
217         status = "okay";
220 &cmu_aud {
221         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
222                 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
223                 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
224                 <&cmu_top CLK_MOUT_AUD_PLL>,
225                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
226                 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
227                 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
228                 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
230                 <&cmu_aud CLK_DIV_AUD_CA5>,
231                 <&cmu_aud CLK_DIV_ACLK_AUD>,
232                 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
233                 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
234                 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
235                 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
236                 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
237                 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
238                 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
239                 <&cmu_top CLK_DIV_SCLK_PCM1>,
240                 <&cmu_top CLK_DIV_SCLK_I2S1>;
242         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
243                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
244                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
245                 <&cmu_top CLK_FOUT_AUD_PLL>,
246                 <&cmu_top CLK_MOUT_AUD_PLL>,
247                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
248                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
249                 <&cmu_top CLK_SCLK_AUDIO0>;
251         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
252                 <196608001>, <65536001>, <32768001>, <49152001>,
253                 <2048001>, <24576001>, <196608001>,
254                 <24576001>, <98304001>, <2048001>, <49152001>;
257 &cmu_fsys {
258         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
259                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
260                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
261                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
262                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
263                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
264                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
265                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
266                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
267                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
268         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
269                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
270                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
271                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
272                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
273                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
274                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
275                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
276         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
277                                <66700000>, <66700000>;
280 &cmu_gscl {
281         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
282                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
283         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
284                                  <&cmu_top CLK_ACLK_GSCL_333>;
287 &cmu_mfc {
288         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
289         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
292 &cmu_mif {
293         assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
294         assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
295         assigned-clock-rates = <0>, <333000000>;
298 &cmu_mscl {
299         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
300                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
301                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
302                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
303         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
304                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
305                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
306                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
309 &cmu_top {
310         assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
311         assigned-clock-rates = <196608001>;
314 &cpu0 {
315         cpu-supply = <&buck3_reg>;
318 &cpu4 {
319         cpu-supply = <&buck2_reg>;
322 &decon {
323         status = "okay";
326 &decon_tv {
327         status = "okay";
329         ports {
330                 #address-cells = <1>;
331                 #size-cells = <0>;
333                 port@0 {
334                         reg = <0>;
335                         tv_to_hdmi: endpoint {
336                                 remote-endpoint = <&hdmi_to_tv>;
337                         };
338                 };
339         };
342 &dsi {
343         status = "okay";
344         vddcore-supply = <&ldo6_reg>;
345         vddio-supply = <&ldo7_reg>;
346         samsung,burst-clock-frequency = <512000000>;
347         samsung,esc-clock-frequency = <16000000>;
348         samsung,pll-clock-frequency = <24000000>;
349         pinctrl-names = "default";
350         pinctrl-0 = <&te_irq>;
353 &gpu {
354         mali-supply = <&buck6_reg>;
355         status = "okay";
358 &hdmi {
359         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
360         status = "okay";
361         vdd-supply = <&ldo6_reg>;
362         vdd_osc-supply = <&ldo7_reg>;
363         vdd_pll-supply = <&ldo6_reg>;
365         ports {
366                 #address-cells = <1>;
367                 #size-cells = <0>;
369                 port@0 {
370                         reg = <0>;
371                         hdmi_to_tv: endpoint {
372                                 remote-endpoint = <&tv_to_hdmi>;
373                         };
374                 };
376                 port@1 {
377                         reg = <1>;
378                         hdmi_to_mhl: endpoint {
379                                 remote-endpoint = <&mhl_to_hdmi>;
380                         };
381                 };
382         };
385 &hsi2c_0 {
386         status = "okay";
387         clock-frequency = <2500000>;
389         s2mps13-pmic@66 {
390                 compatible = "samsung,s2mps13-pmic";
391                 interrupt-parent = <&gpa0>;
392                 interrupts = <7 IRQ_TYPE_NONE>;
393                 reg = <0x66>;
394                 samsung,s2mps11-wrstbi-ground;
396                 s2mps13_osc: clocks {
397                         compatible = "samsung,s2mps13-clk";
398                         #clock-cells = <1>;
399                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
400                                 "s2mps13_bt";
401                 };
403                 regulators {
404                         ldo1_reg: LDO1 {
405                                 regulator-name = "VDD_ALIVE_0.9V_AP";
406                                 regulator-min-microvolt = <900000>;
407                                 regulator-max-microvolt = <900000>;
408                                 regulator-always-on;
409                         };
411                         ldo2_reg: LDO2 {
412                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
413                                 regulator-min-microvolt = <2800000>;
414                                 regulator-max-microvolt = <2800000>;
415                                 regulator-always-on;
416                                 regulator-state-mem {
417                                         regulator-off-in-suspend;
418                                 };
419                         };
421                         ldo3_reg: LDO3 {
422                                 regulator-name = "VDD1_E_1.8V_AP";
423                                 regulator-min-microvolt = <1800000>;
424                                 regulator-max-microvolt = <1800000>;
425                                 regulator-always-on;
426                         };
428                         ldo4_reg: LDO4 {
429                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
430                                 regulator-min-microvolt = <1300000>;
431                                 regulator-max-microvolt = <1300000>;
432                                 regulator-always-on;
433                                 regulator-state-mem {
434                                         regulator-off-in-suspend;
435                                 };
436                         };
438                         ldo5_reg: LDO5 {
439                                 regulator-name = "VDD10_DPLL_1.0V_AP";
440                                 regulator-min-microvolt = <1000000>;
441                                 regulator-max-microvolt = <1000000>;
442                                 regulator-always-on;
443                                 regulator-state-mem {
444                                         regulator-off-in-suspend;
445                                 };
446                         };
448                         ldo6_reg: LDO6 {
449                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
450                                 regulator-min-microvolt = <1000000>;
451                                 regulator-max-microvolt = <1000000>;
452                                 regulator-state-mem {
453                                         regulator-off-in-suspend;
454                                 };
455                         };
457                         ldo7_reg: LDO7 {
458                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
459                                 regulator-min-microvolt = <1800000>;
460                                 regulator-max-microvolt = <1800000>;
461                                 regulator-always-on;
462                                 regulator-state-mem {
463                                         regulator-off-in-suspend;
464                                 };
465                         };
467                         ldo8_reg: LDO8 {
468                                 regulator-name = "VDD18_LLI_1.8V_AP";
469                                 regulator-min-microvolt = <1800000>;
470                                 regulator-max-microvolt = <1800000>;
471                                 regulator-always-on;
472                                 regulator-state-mem {
473                                         regulator-off-in-suspend;
474                                 };
475                         };
477                         ldo9_reg: LDO9 {
478                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
479                                 regulator-min-microvolt = <1800000>;
480                                 regulator-max-microvolt = <1800000>;
481                                 regulator-always-on;
482                                 regulator-state-mem {
483                                         regulator-off-in-suspend;
484                                 };
485                         };
487                         ldo10_reg: LDO10 {
488                                 regulator-name = "VDD33_USB30_3.0V_AP";
489                                 regulator-min-microvolt = <3000000>;
490                                 regulator-max-microvolt = <3000000>;
491                                 regulator-state-mem {
492                                         regulator-off-in-suspend;
493                                 };
494                         };
496                         ldo11_reg: LDO11 {
497                                 regulator-name = "VDD_INT_M_1.0V_AP";
498                                 regulator-min-microvolt = <1000000>;
499                                 regulator-max-microvolt = <1000000>;
500                                 regulator-always-on;
501                                 regulator-state-mem {
502                                         regulator-off-in-suspend;
503                                 };
504                         };
506                         ldo12_reg: LDO12 {
507                                 regulator-name = "VDD_KFC_M_1.1V_AP";
508                                 regulator-min-microvolt = <800000>;
509                                 regulator-max-microvolt = <1350000>;
510                                 regulator-always-on;
511                         };
513                         ldo13_reg: LDO13 {
514                                 regulator-name = "VDD_G3D_M_0.95V_AP";
515                                 regulator-min-microvolt = <950000>;
516                                 regulator-max-microvolt = <950000>;
517                                 regulator-always-on;
518                                 regulator-state-mem {
519                                         regulator-off-in-suspend;
520                                 };
521                         };
523                         ldo14_reg: LDO14 {
524                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
525                                 regulator-min-microvolt = <1200000>;
526                                 regulator-max-microvolt = <1200000>;
527                                 regulator-always-on;
528                                 regulator-state-mem {
529                                         regulator-off-in-suspend;
530                                 };
531                         };
533                         ldo15_reg: LDO15 {
534                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
535                                 regulator-min-microvolt = <1200000>;
536                                 regulator-max-microvolt = <1200000>;
537                                 regulator-always-on;
538                                 regulator-state-mem {
539                                         regulator-off-in-suspend;
540                                 };
541                         };
543                         ldo16_reg: LDO16 {
544                                 regulator-name = "VDDQ_EFUSE";
545                                 regulator-min-microvolt = <1400000>;
546                                 regulator-max-microvolt = <3400000>;
547                                 regulator-always-on;
548                         };
550                         ldo17_reg: LDO17 {
551                                 regulator-name = "V_TFLASH_2.8V_AP";
552                                 regulator-min-microvolt = <2800000>;
553                                 regulator-max-microvolt = <2800000>;
554                         };
556                         ldo18_reg: LDO18 {
557                                 regulator-name = "V_CODEC_1.8V_AP";
558                                 regulator-min-microvolt = <1800000>;
559                                 regulator-max-microvolt = <1800000>;
560                         };
562                         ldo19_reg: LDO19 {
563                                 regulator-name = "VDDA_1.8V_COMP";
564                                 regulator-min-microvolt = <1800000>;
565                                 regulator-max-microvolt = <1800000>;
566                                 regulator-always-on;
567                         };
569                         ldo20_reg: LDO20 {
570                                 regulator-name = "VCC_2.8V_AP";
571                                 regulator-min-microvolt = <2800000>;
572                                 regulator-max-microvolt = <2800000>;
573                                 regulator-always-on;
574                         };
576                         ldo21_reg: LDO21 {
577                                 regulator-name = "VT_CAM_1.8V";
578                                 regulator-min-microvolt = <1800000>;
579                                 regulator-max-microvolt = <1800000>;
580                         };
582                         ldo22_reg: LDO22 {
583                                 regulator-name = "CAM_IO_1.8V_AP";
584                                 regulator-min-microvolt = <1800000>;
585                                 regulator-max-microvolt = <1800000>;
586                         };
588                         ldo23_reg: LDO23 {
589                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
590                                 regulator-min-microvolt = <1050000>;
591                                 regulator-max-microvolt = <1050000>;
592                         };
594                         ldo24_reg: LDO24 {
595                                 regulator-name = "VT_CAM_1.2V";
596                                 regulator-min-microvolt = <1200000>;
597                                 regulator-max-microvolt = <1200000>;
598                         };
600                         ldo25_reg: LDO25 {
601                                 regulator-name = "UNUSED_LDO25";
602                                 regulator-min-microvolt = <2800000>;
603                                 regulator-max-microvolt = <2800000>;
604                         };
606                         ldo26_reg: LDO26 {
607                                 regulator-name = "CAM_AF_2.8V_AP";
608                                 regulator-min-microvolt = <2800000>;
609                                 regulator-max-microvolt = <2800000>;
610                         };
612                         ldo27_reg: LDO27 {
613                                 regulator-name = "VCC_3.0V_LCD_AP";
614                                 regulator-min-microvolt = <3000000>;
615                                 regulator-max-microvolt = <3000000>;
616                         };
618                         ldo28_reg: LDO28 {
619                                 regulator-name = "VCC_1.8V_LCD_AP";
620                                 regulator-min-microvolt = <1800000>;
621                                 regulator-max-microvolt = <1800000>;
622                         };
624                         ldo29_reg: LDO29 {
625                                 regulator-name = "VT_CAM_2.8V";
626                                 regulator-min-microvolt = <3000000>;
627                                 regulator-max-microvolt = <3000000>;
628                         };
630                         ldo30_reg: LDO30 {
631                                 regulator-name = "TSP_AVDD_3.3V_AP";
632                                 regulator-min-microvolt = <3300000>;
633                                 regulator-max-microvolt = <3300000>;
634                         };
636                         ldo31_reg: LDO31 {
637                                 /*
638                                  * LDO31 differs from target to target,
639                                  * its definition is in the .dts
640                                  */
641                         };
643                         ldo32_reg: LDO32 {
644                                 regulator-name = "VTOUCH_1.8V_AP";
645                                 regulator-min-microvolt = <1800000>;
646                                 regulator-max-microvolt = <1800000>;
647                         };
649                         ldo33_reg: LDO33 {
650                                 regulator-name = "VTOUCH_LED_3.3V";
651                                 regulator-min-microvolt = <2500000>;
652                                 regulator-max-microvolt = <3300000>;
653                                 regulator-ramp-delay = <12500>;
654                         };
656                         ldo34_reg: LDO34 {
657                                 regulator-name = "VCC_1.8V_MHL_AP";
658                                 regulator-min-microvolt = <1000000>;
659                                 regulator-max-microvolt = <2100000>;
660                         };
662                         ldo35_reg: LDO35 {
663                                 regulator-name = "OIS_VM_2.8V";
664                                 regulator-min-microvolt = <1800000>;
665                                 regulator-max-microvolt = <2800000>;
666                         };
668                         ldo36_reg: LDO36 {
669                                 regulator-name = "VSIL_1.0V";
670                                 regulator-min-microvolt = <1000000>;
671                                 regulator-max-microvolt = <1000000>;
672                         };
674                         ldo37_reg: LDO37 {
675                                 regulator-name = "VF_1.8V";
676                                 regulator-min-microvolt = <1800000>;
677                                 regulator-max-microvolt = <1800000>;
678                         };
680                         ldo38_reg: LDO38 {
681                                 /*
682                                  * LDO38 differs from target to target,
683                                  * its definition is in the .dts
684                                  */
685                         };
687                         ldo39_reg: LDO39 {
688                                 regulator-name = "V_HRM_1.8V";
689                                 regulator-min-microvolt = <1800000>;
690                                 regulator-max-microvolt = <1800000>;
691                         };
693                         ldo40_reg: LDO40 {
694                                 regulator-name = "V_HRM_3.3V";
695                                 regulator-min-microvolt = <3300000>;
696                                 regulator-max-microvolt = <3300000>;
697                         };
699                         buck1_reg: BUCK1 {
700                                 regulator-name = "VDD_MIF_0.9V_AP";
701                                 regulator-min-microvolt = <600000>;
702                                 regulator-max-microvolt = <1500000>;
703                                 regulator-always-on;
704                                 regulator-state-mem {
705                                         regulator-off-in-suspend;
706                                 };
707                         };
709                         buck2_reg: BUCK2 {
710                                 regulator-name = "VDD_EGL_1.0V_AP";
711                                 regulator-min-microvolt = <900000>;
712                                 regulator-max-microvolt = <1300000>;
713                                 regulator-always-on;
714                                 regulator-state-mem {
715                                         regulator-off-in-suspend;
716                                 };
717                         };
719                         buck3_reg: BUCK3 {
720                                 regulator-name = "VDD_KFC_1.0V_AP";
721                                 regulator-min-microvolt = <800000>;
722                                 regulator-max-microvolt = <1200000>;
723                                 regulator-always-on;
724                                 regulator-state-mem {
725                                         regulator-off-in-suspend;
726                                 };
727                         };
729                         buck4_reg: BUCK4 {
730                                 regulator-name = "VDD_INT_0.95V_AP";
731                                 regulator-min-microvolt = <600000>;
732                                 regulator-max-microvolt = <1500000>;
733                                 regulator-always-on;
734                                 regulator-state-mem {
735                                         regulator-off-in-suspend;
736                                 };
737                         };
739                         buck5_reg: BUCK5 {
740                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
741                                 regulator-min-microvolt = <600000>;
742                                 regulator-max-microvolt = <1500000>;
743                                 regulator-always-on;
744                                 regulator-state-mem {
745                                         regulator-off-in-suspend;
746                                 };
747                         };
749                         buck6_reg: BUCK6 {
750                                 regulator-name = "VDD_G3D_0.9V_AP";
751                                 regulator-min-microvolt = <600000>;
752                                 regulator-max-microvolt = <1500000>;
753                                 regulator-always-on;
754                                 regulator-state-mem {
755                                         regulator-off-in-suspend;
756                                 };
757                         };
759                         buck7_reg: BUCK7 {
760                                 regulator-name = "VDD_MEM1_1.2V_AP";
761                                 regulator-min-microvolt = <1200000>;
762                                 regulator-max-microvolt = <1200000>;
763                                 regulator-always-on;
764                         };
766                         buck8_reg: BUCK8 {
767                                 regulator-name = "VDD_LLDO_1.35V_AP";
768                                 regulator-min-microvolt = <1350000>;
769                                 regulator-max-microvolt = <3300000>;
770                                 regulator-always-on;
771                         };
773                         buck9_reg: BUCK9 {
774                                 regulator-name = "VDD_MLDO_2.0V_AP";
775                                 regulator-min-microvolt = <1350000>;
776                                 regulator-max-microvolt = <3300000>;
777                                 regulator-always-on;
778                         };
780                         buck10_reg: BUCK10 {
781                                 regulator-name = "vdd_mem2";
782                                 regulator-min-microvolt = <550000>;
783                                 regulator-max-microvolt = <1500000>;
784                                 regulator-always-on;
785                         };
786                 };
787         };
790 &hsi2c_4 {
791         status = "okay";
793         s3fwrn5: nfc@27 {
794                 compatible = "samsung,s3fwrn5-i2c";
795                 reg = <0x27>;
796                 interrupt-parent = <&gpa1>;
797                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
798                 s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
799                 s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
800         };
803 &hsi2c_5 {
804         status = "okay";
806         stmfts: touchscreen@49 {
807                 compatible = "st,stmfts";
808                 reg = <0x49>;
809                 interrupt-parent = <&gpa1>;
810                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
811                 avdd-supply = <&ldo30_reg>;
812                 vdd-supply = <&ldo31_reg>;
813         };
816 &hsi2c_7 {
817         status = "okay";
818         clock-frequency = <1000000>;
820         sii8620@39 {
821                 reg = <0x39>;
822                 compatible = "sil,sii8620";
823                 cvcc10-supply = <&ldo36_reg>;
824                 iovcc18-supply = <&ldo34_reg>;
825                 interrupt-parent = <&gpf0>;
826                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
827                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
828                 clocks = <&pmu_system_controller 0>;
829                 clock-names = "xtal";
831                 ports {
832                         #address-cells = <1>;
833                         #size-cells = <0>;
835                         port@0 {
836                                 reg = <0>;
837                                 mhl_to_hdmi: endpoint {
838                                         remote-endpoint = <&hdmi_to_mhl>;
839                                 };
840                         };
842                         port@1 {
843                                 reg = <1>;
844                                 mhl_to_musb_con: endpoint {
845                                         remote-endpoint = <&musb_con_to_mhl>;
846                                 };
847                         };
848                 };
849         };
852 &hsi2c_8 {
853         status = "okay";
855         max77843@66 {
856                 compatible = "maxim,max77843";
857                 interrupt-parent = <&gpa1>;
858                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
859                 reg = <0x66>;
861                 muic: max77843-muic {
862                         compatible = "maxim,max77843-muic";
864                         musb_con: musb_connector {
865                                 compatible = "samsung,usb-connector-11pin",
866                                              "usb-b-connector";
867                                 label = "micro-USB";
868                                 type = "micro";
870                                 ports {
871                                         #address-cells = <1>;
872                                         #size-cells = <0>;
874                                         port@3 {
875                                                 reg = <3>;
876                                                 musb_con_to_mhl: endpoint {
877                                                         remote-endpoint = <&mhl_to_musb_con>;
878                                                 };
879                                         };
880                                 };
881                         };
883                         ports {
884                                 port {
885                                         muic_to_usb: endpoint {
886                                                 remote-endpoint = <&usb_to_muic>;
887                                         };
888                                 };
889                         };
890                 };
892                 regulators {
893                         compatible = "maxim,max77843-regulator";
894                         safeout1_reg: SAFEOUT1 {
895                                 regulator-name = "SAFEOUT1";
896                                 regulator-min-microvolt = <3300000>;
897                                 regulator-max-microvolt = <4950000>;
898                         };
900                         safeout2_reg: SAFEOUT2 {
901                                 regulator-name = "SAFEOUT2";
902                                 regulator-min-microvolt = <3300000>;
903                                 regulator-max-microvolt = <4950000>;
904                         };
906                         charger_reg: CHARGER {
907                                 regulator-name = "CHARGER";
908                                 regulator-min-microamp = <100000>;
909                                 regulator-max-microamp = <3150000>;
910                         };
911                 };
913                 haptic: max77843-haptic {
914                         compatible = "maxim,max77843-haptic";
915                         haptic-supply = <&ldo38_reg>;
916                         pwms = <&pwm 0 33670 0>;
917                         pwm-names = "haptic";
918                 };
919         };
922 &hsi2c_11 {
923         status = "okay";
926 &i2s0 {
927         status = "okay";
930 &i2s1 {
931         assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
932         assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
933         status = "okay";
936 &mshc_0 {
937         status = "okay";
938         mmc-hs200-1_8v;
939         mmc-hs400-1_8v;
940         cap-mmc-highspeed;
941         non-removable;
942         card-detect-delay = <200>;
943         samsung,dw-mshc-ciu-div = <3>;
944         samsung,dw-mshc-sdr-timing = <0 4>;
945         samsung,dw-mshc-ddr-timing = <0 2>;
946         samsung,dw-mshc-hs400-timing = <0 3>;
947         samsung,read-strobe-delay = <90>;
948         fifo-depth = <0x80>;
949         pinctrl-names = "default";
950         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
951                         &sd0_bus8 &sd0_rdqs>;
952         bus-width = <8>;
953         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
954         assigned-clock-rates = <800000000>;
957 &mshc_2 {
958         status = "okay";
959         cap-sd-highspeed;
960         disable-wp;
961         cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
962         card-detect-delay = <200>;
963         samsung,dw-mshc-ciu-div = <3>;
964         samsung,dw-mshc-sdr-timing = <0 4>;
965         samsung,dw-mshc-ddr-timing = <0 2>;
966         fifo-depth = <0x80>;
967         pinctrl-names = "default";
968         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
969         bus-width = <4>;
972 &ppmu_d0_general {
973         status = "okay";
974         events {
975                 ppmu_event0_d0_general: ppmu-event0-d0-general {
976                         event-name = "ppmu-event0-d0-general";
977                 };
978         };
981 &ppmu_d1_general {
982         status = "okay";
983         events {
984                 ppmu_event0_d1_general: ppmu-event0-d1-general {
985                        event-name = "ppmu-event0-d1-general";
986                };
987        };
990 &pinctrl_alive {
991         pinctrl-names = "default";
992         pinctrl-0 = <&initial_alive>;
994         initial_alive: initial-state {
995                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
996                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
997                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
998                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
999                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
1000                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
1001                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
1002                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
1004                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
1005                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
1006                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
1007                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
1008                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
1009                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
1010                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
1011                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
1013                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
1014                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
1015                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
1016                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
1017                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
1018                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
1019                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
1020                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
1022                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
1023                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
1024                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
1025                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
1026                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
1027                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
1028                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
1029                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
1031                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
1032                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
1033                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
1034                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
1035                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
1036                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
1037                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
1039                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
1040                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
1041                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
1042                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
1044                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
1045                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
1046                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
1047                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
1049                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
1050                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
1051                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
1052                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
1053                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
1054                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
1055                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
1056                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
1058                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
1059                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
1060                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
1061                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
1062                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
1063                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
1064                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
1065                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
1066         };
1068         te_irq: te_irq {
1069                 samsung,pins = "gpf1-3";
1070                 samsung,pin-function = <0xf>;
1071         };
1074 &pinctrl_cpif {
1075         pinctrl-names = "default";
1076         pinctrl-0 = <&initial_cpif>;
1078         initial_cpif: initial-state {
1079                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
1080                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
1081         };
1084 &pinctrl_ese {
1085         pinctrl-names = "default";
1086         pinctrl-0 = <&initial_ese>;
1088         initial_ese: initial-state {
1089                 PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
1090                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
1091                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
1092         };
1095 &pinctrl_fsys {
1096         pinctrl-names = "default";
1097         pinctrl-0 = <&initial_fsys>;
1099         initial_fsys: initial-state {
1100                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1101                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1102                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1103                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1104                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1105         };
1108 &pinctrl_imem {
1109         pinctrl-names = "default";
1110         pinctrl-0 = <&initial_imem>;
1112         initial_imem: initial-state {
1113                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1114                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1115                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1116                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1117                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1118                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1119                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1120                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1121         };
1124 &pinctrl_nfc {
1125         pinctrl-names = "default";
1126         pinctrl-0 = <&initial_nfc>;
1128         initial_nfc: initial-state {
1129                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1130         };
1133 &pinctrl_peric {
1134         pinctrl-names = "default";
1135         pinctrl-0 = <&initial_peric>;
1137         initial_peric: initial-state {
1138                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1139                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1140                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1141                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1142                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1143                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1145                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1147                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1148                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1149                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1151                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1153                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1154                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1155                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1156                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1158                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1159                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1161                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1163                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1164                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1165                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1166                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1167                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1169                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1171                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1173                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1174                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1175                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1176                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1177                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1179                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1180                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1182                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1183                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1184                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1185         };
1188 &pinctrl_touch {
1189         pinctrl-names = "default";
1190         pinctrl-0 = <&initial_touch>;
1192         initial_touch: initial-state {
1193                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1194         };
1197 &pwm {
1198         pinctrl-0 = <&pwm0_out>;
1199         pinctrl-names = "default";
1200         status = "okay";
1203 &mic {
1204         status = "okay";
1207 &pmu_system_controller {
1208         assigned-clocks = <&pmu_system_controller 0>;
1209         assigned-clock-parents = <&xxti>;
1212 &serial_1 {
1213         status = "okay";
1216 &serial_3 {
1217         status = "okay";
1219         bluetooth {
1220                 compatible = "brcm,bcm43438-bt";
1221                 max-speed = <3000000>;
1222                 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1223                 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
1224                 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
1225                 clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
1226                 clock-names = "extclk";
1227         };
1230 &spi_1 {
1231         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1232         status = "okay";
1234         wm5110: wm5110-codec@0 {
1235                 compatible = "wlf,wm5110";
1236                 reg = <0x0>;
1237                 spi-max-frequency = <20000000>;
1238                 interrupt-parent = <&gpa0>;
1239                 interrupts = <4 IRQ_TYPE_NONE>;
1240                 clocks = <&pmu_system_controller 0>,
1241                         <&s2mps13_osc S2MPS11_CLK_BT>;
1242                 clock-names = "mclk1", "mclk2";
1244                 gpio-controller;
1245                 #gpio-cells = <2>;
1247                 wlf,micd-detect-debounce = <300>;
1248                 wlf,micd-bias-start-time = <0x1>;
1249                 wlf,micd-rate = <0x7>;
1250                 wlf,micd-dbtime = <0x1>;
1251                 wlf,micd-force-micbias;
1252                 wlf,micd-configs = <0x0 1 0>;
1253                 wlf,hpdet-channel = <1>;
1254                 wlf,gpsw = <0x1>;
1255                 wlf,inmode = <2 0 2 0>;
1257                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1258                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1260                 /* core supplies */
1261                 AVDD-supply = <&ldo18_reg>;
1262                 DBVDD1-supply = <&ldo18_reg>;
1263                 CPVDD-supply = <&ldo18_reg>;
1264                 DBVDD2-supply = <&ldo18_reg>;
1265                 DBVDD3-supply = <&ldo18_reg>;
1267                 controller-data {
1268                         samsung,spi-feedback-delay = <0>;
1269                 };
1270         };
1273 &spi_3 {
1274         status = "okay";
1275         no-cs-readback;
1277         irled@0 {
1278                 compatible = "ir-spi-led";
1279                 reg = <0x0>;
1280                 spi-max-frequency = <5000000>;
1281                 power-supply = <&irda_regulator>;
1282                 duty-cycle = <60>;
1283                 led-active-low;
1285                 controller-data {
1286                         samsung,spi-feedback-delay = <0>;
1287                 };
1288         };
1291 &timer {
1292         clock-frequency = <24000000>;
1295 &tmu_atlas0 {
1296         vtmu-supply = <&ldo3_reg>;
1297         status = "okay";
1300 &tmu_apollo {
1301         vtmu-supply = <&ldo3_reg>;
1302         status = "okay";
1305 &tmu_g3d {
1306         vtmu-supply = <&ldo3_reg>;
1307         status = "okay";
1310 &usbdrd30 {
1311         vdd33-supply = <&ldo10_reg>;
1312         vdd10-supply = <&ldo6_reg>;
1313         status = "okay";
1316 &usbdrd_dwc3 {
1317         dr_mode = "otg";
1320 &usbdrd30_phy {
1321         vbus-supply = <&safeout1_reg>;
1322         status = "okay";
1324         port {
1325                 usb_to_muic: endpoint {
1326                         remote-endpoint = <&muic_to_usb>;
1327                 };
1328         };
1331 &xxti {
1332         clock-frequency = <24000000>;