staging: rtl8192u: remove redundant assignment to pointer crypt
[linux/fpc-iii.git] / arch / arm64 / boot / dts / exynos / exynos5433-tm2.dts
blobdda5d2746a74f6062e0ad5dc7dcab2dab0d71786
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * SAMSUNG Exynos5433 TM2 board device tree source
4  *
5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6  *
7  * Device tree source file for Samsung's TM2 board which is based on
8  * Samsung Exynos5433 SoC.
9  */
11 #include "exynos5433-tm2-common.dtsi"
13 / {
14         model = "Samsung TM2 board";
15         compatible = "samsung,tm2", "samsung,exynos5433";
18 &cmu_disp {
19         /*
20          * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
21          * clocks properties for DISP CMU for each board to keep them together
22          * for easier review and maintenance.
23          */
24         assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
25                           <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
26                           <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
27                           <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
28                           <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
29                           <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
30                           <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
31                           <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
32                           <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
33                           <&cmu_disp CLK_MOUT_DISP_PLL>,
34                           <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
35                           <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
36                           <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>,
37                           <&cmu_disp CLK_MOUT_SCLK_DSD_USER>;
38         assigned-clock-parents = <0>, <0>,
39                                  <&cmu_mif CLK_ACLK_DISP_333>,
40                                  <&cmu_mif CLK_SCLK_DSIM0_DISP>,
41                                  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
42                                  <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
43                                  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
44                                  <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
45                                  <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
46                                  <&cmu_disp CLK_FOUT_DISP_PLL>,
47                                  <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
48                                  <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
49                                  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
50                                  <&cmu_mif CLK_SCLK_DSD_DISP>;
51         assigned-clock-rates = <250000000>, <400000000>;
54 &dsi {
55         panel@0 {
56                 compatible = "samsung,s6e3ha2";
57                 reg = <0>;
58                 vdd3-supply = <&ldo27_reg>;
59                 vci-supply = <&ldo28_reg>;
60                 reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
61                 enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
62         };
65 &hsi2c_9 {
66         status = "okay";
68         touchkey@20 {
69                 compatible = "cypress,tm2-touchkey";
70                 reg = <0x20>;
71                 interrupt-parent = <&gpa3>;
72                 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
73                 vcc-supply = <&ldo32_reg>;
74                 vdd-supply = <&ldo33_reg>;
75         };
78 &ldo31_reg {
79         regulator-name = "TSP_VDD_1.85V_AP";
80         regulator-min-microvolt = <1850000>;
81         regulator-max-microvolt = <1850000>;
84 &ldo38_reg {
85         regulator-name = "VCC_3.0V_MOTOR_AP";
86         regulator-min-microvolt = <3000000>;
87         regulator-max-microvolt = <3000000>;
90 &stmfts {
91         touchscreen-size-x = <1439>;
92         touchscreen-size-y = <2559>;