| blob | ec6257a5b251504f23dcd752a6fa61757a57d92e |
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Device Tree Include file for Freescale Layerscape-1012A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 *
7 */
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/thermal/thermal.h>
12 / {
13 compatible = "fsl,ls1012a";
14 interrupt-parent = <&gic>;
15 #address-cells = <2>;
16 #size-cells = <2>;
18 aliases {
19 crypto = &crypto;
20 rtic-a = &rtic_a;
21 rtic-b = &rtic_b;
22 rtic-c = &rtic_c;
23 rtic-d = &rtic_d;
24 sec-mon = &sec_mon;
25 };
27 cpus {
28 #address-cells = <1>;
29 #size-cells = <0>;
31 cpu0: cpu@0 {
32 device_type = "cpu";
33 compatible = "arm,cortex-a53";
34 reg = <0x0>;
35 clocks = <&clockgen 1 0>;
36 #cooling-cells = <2>;
37 cpu-idle-states = <&CPU_PH20>;
38 };
39 };
41 idle-states {
42 /*
43 * PSCI node is not added default, U-boot will add missing
44 * parts if it determines to use PSCI.
45 */
46 entry-method = "psci";
48 CPU_PH20: cpu-ph20 {
49 compatible = "arm,idle-state";
50 idle-state-name = "PH20";
51 arm,psci-suspend-param = <0x0>;
52 entry-latency-us = <1000>;
53 exit-latency-us = <1000>;
54 min-residency-us = <3000>;
55 };
56 };
58 sysclk: sysclk {
59 compatible = "fixed-clock";
60 #clock-cells = <0>;
61 clock-frequency = <125000000>;
62 clock-output-names = "sysclk";
63 };
65 coreclk: coreclk {
66 compatible = "fixed-clock";
67 #clock-cells = <0>;
68 clock-frequency = <100000000>;
69 clock-output-names = "coreclk";
70 };
72 timer {
73 compatible = "arm,armv8-timer";
74 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
75 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
76 <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
77 <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
78 };
80 pmu {
81 compatible = "arm,armv8-pmuv3";
82 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
83 };
85 gic: interrupt-controller@1400000 {
86 compatible = "arm,gic-400";
87 #interrupt-cells = <3>;
88 interrupt-controller;
89 reg = <0x0 0x1401000 0 0x1000>, /* GICD */
90 <0x0 0x1402000 0 0x2000>, /* GICC */
91 <0x0 0x1404000 0 0x2000>, /* GICH */
92 <0x0 0x1406000 0 0x2000>; /* GICV */
93 interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
94 };
96 reboot {
97 compatible = "syscon-reboot";
98 regmap = <&dcfg>;
99 offset = <0xb0>;
100 mask = <0x02>;
101 };
103 thermal-zones {
104 cpu_thermal: cpu-thermal {
105 polling-delay-passive = <1000>;
106 polling-delay = <5000>;
107 thermal-sensors = <&tmu 0>;
109 trips {
110 cpu_alert: cpu-alert {
111 temperature = <85000>;
112 hysteresis = <2000>;
113 type = "passive";
114 };
116 cpu_crit: cpu-crit {
117 temperature = <95000>;
118 hysteresis = <2000>;
119 type = "critical";
120 };
121 };
123 cooling-maps {
124 map0 {
125 trip = <&cpu_alert>;
126 cooling-device =
127 <&cpu0 THERMAL_NO_LIMIT
128 THERMAL_NO_LIMIT>;
129 };
130 };
131 };
132 };
134 soc {
135 compatible = "simple-bus";
136 #address-cells = <2>;
137 #size-cells = <2>;
138 ranges;
140 esdhc0: esdhc@1560000 {
141 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
142 reg = <0x0 0x1560000 0x0 0x10000>;
143 interrupts = <0 62 0x4>;
144 clocks = <&clockgen 4 0>;
145 voltage-ranges = <1800 1800 3300 3300>;
146 sdhci,auto-cmd12;
147 big-endian;
148 bus-width = <4>;
149 status = "disabled";
150 };
152 scfg: scfg@1570000 {
153 compatible = "fsl,ls1012a-scfg", "syscon";
154 reg = <0x0 0x1570000 0x0 0x10000>;
155 big-endian;
156 };
158 esdhc1: esdhc@1580000 {
159 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
160 reg = <0x0 0x1580000 0x0 0x10000>;
161 interrupts = <0 65 0x4>;
162 clocks = <&clockgen 4 0>;
163 voltage-ranges = <1800 1800 3300 3300>;
164 sdhci,auto-cmd12;
165 big-endian;
166 broken-cd;
167 bus-width = <4>;
168 status = "disabled";
169 };
171 crypto: crypto@1700000 {
172 compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
173 "fsl,sec-v4.0";
174 fsl,sec-era = <8>;
175 #address-cells = <1>;
176 #size-cells = <1>;
177 ranges = <0x0 0x00 0x1700000 0x100000>;
178 reg = <0x00 0x1700000 0x0 0x100000>;
179 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
181 sec_jr0: jr@10000 {
182 compatible = "fsl,sec-v5.4-job-ring",
183 "fsl,sec-v5.0-job-ring",
184 "fsl,sec-v4.0-job-ring";
185 reg = <0x10000 0x10000>;
186 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
187 };
189 sec_jr1: jr@20000 {
190 compatible = "fsl,sec-v5.4-job-ring",
191 "fsl,sec-v5.0-job-ring",
192 "fsl,sec-v4.0-job-ring";
193 reg = <0x20000 0x10000>;
194 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
195 };
197 sec_jr2: jr@30000 {
198 compatible = "fsl,sec-v5.4-job-ring",
199 "fsl,sec-v5.0-job-ring",
200 "fsl,sec-v4.0-job-ring";
201 reg = <0x30000 0x10000>;
202 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
203 };
205 sec_jr3: jr@40000 {
206 compatible = "fsl,sec-v5.4-job-ring",
207 "fsl,sec-v5.0-job-ring",
208 "fsl,sec-v4.0-job-ring";
209 reg = <0x40000 0x10000>;
210 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
211 };
213 rtic@60000 {
214 compatible = "fsl,sec-v5.4-rtic",
215 "fsl,sec-v5.0-rtic",
216 "fsl,sec-v4.0-rtic";
217 #address-cells = <1>;
218 #size-cells = <1>;
219 reg = <0x60000 0x100 0x60e00 0x18>;
220 ranges = <0x0 0x60100 0x500>;
222 rtic_a: rtic-a@0 {
223 compatible = "fsl,sec-v5.4-rtic-memory",
224 "fsl,sec-v5.0-rtic-memory",
225 "fsl,sec-v4.0-rtic-memory";
226 reg = <0x00 0x20 0x100 0x100>;
227 };
229 rtic_b: rtic-b@20 {
230 compatible = "fsl,sec-v5.4-rtic-memory",
231 "fsl,sec-v5.0-rtic-memory",
232 "fsl,sec-v4.0-rtic-memory";
233 reg = <0x20 0x20 0x200 0x100>;
234 };
236 rtic_c: rtic-c@40 {
237 compatible = "fsl,sec-v5.4-rtic-memory",
238 "fsl,sec-v5.0-rtic-memory",
239 "fsl,sec-v4.0-rtic-memory";
240 reg = <0x40 0x20 0x300 0x100>;
241 };
243 rtic_d: rtic-d@60 {
244 compatible = "fsl,sec-v5.4-rtic-memory",
245 "fsl,sec-v5.0-rtic-memory",
246 "fsl,sec-v4.0-rtic-memory";
247 reg = <0x60 0x20 0x400 0x100>;
248 };
249 };
250 };
252 sec_mon: sec_mon@1e90000 {
253 compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
254 "fsl,sec-v4.0-mon";
255 reg = <0x0 0x1e90000 0x0 0x10000>;
256 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
257 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
258 };
260 dcfg: dcfg@1ee0000 {
261 compatible = "fsl,ls1012a-dcfg",
262 "syscon";
263 reg = <0x0 0x1ee0000 0x0 0x10000>;
264 big-endian;
265 };
267 clockgen: clocking@1ee1000 {
268 compatible = "fsl,ls1012a-clockgen";
269 reg = <0x0 0x1ee1000 0x0 0x1000>;
270 #clock-cells = <2>;
271 clocks = <&sysclk &coreclk>;
272 clock-names = "sysclk", "coreclk";
273 };
275 tmu: tmu@1f00000 {
276 compatible = "fsl,qoriq-tmu";
277 reg = <0x0 0x1f00000 0x0 0x10000>;
278 interrupts = <0 33 0x4>;
279 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
280 fsl,tmu-calibration = <0x00000000 0x00000026
281 0x00000001 0x0000002d
282 0x00000002 0x00000032
283 0x00000003 0x00000039
284 0x00000004 0x0000003f
285 0x00000005 0x00000046
286 0x00000006 0x0000004d
287 0x00000007 0x00000054
288 0x00000008 0x0000005a
289 0x00000009 0x00000061
290 0x0000000a 0x0000006a
291 0x0000000b 0x00000071
293 0x00010000 0x00000025
294 0x00010001 0x0000002c
295 0x00010002 0x00000035
296 0x00010003 0x0000003d
297 0x00010004 0x00000045
298 0x00010005 0x0000004e
299 0x00010006 0x00000057
300 0x00010007 0x00000061
301 0x00010008 0x0000006b
302 0x00010009 0x00000076
304 0x00020000 0x00000029
305 0x00020001 0x00000033
306 0x00020002 0x0000003d
307 0x00020003 0x00000049
308 0x00020004 0x00000056
309 0x00020005 0x00000061
310 0x00020006 0x0000006d
312 0x00030000 0x00000021
313 0x00030001 0x0000002a
314 0x00030002 0x0000003c
315 0x00030003 0x0000004e>;
316 big-endian;
317 #thermal-sensor-cells = <1>;
318 };
320 i2c0: i2c@2180000 {
321 compatible = "fsl,vf610-i2c";
322 #address-cells = <1>;
323 #size-cells = <0>;
324 reg = <0x0 0x2180000 0x0 0x10000>;
325 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
326 clocks = <&clockgen 4 0>;
327 status = "disabled";
328 };
330 i2c1: i2c@2190000 {
331 compatible = "fsl,vf610-i2c";
332 #address-cells = <1>;
333 #size-cells = <0>;
334 reg = <0x0 0x2190000 0x0 0x10000>;
335 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
336 clocks = <&clockgen 4 0>;
337 status = "disabled";
338 };
340 dspi: spi@2100000 {
341 compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
342 #address-cells = <1>;
343 #size-cells = <0>;
344 reg = <0x0 0x2100000 0x0 0x10000>;
345 interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
346 clock-names = "dspi";
347 clocks = <&clockgen 4 0>;
348 spi-num-chipselects = <5>;
349 big-endian;
350 status = "disabled";
351 };
353 duart0: serial@21c0500 {
354 compatible = "fsl,ns16550", "ns16550a";
355 reg = <0x00 0x21c0500 0x0 0x100>;
356 interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
357 clocks = <&clockgen 4 0>;
358 status = "disabled";
359 };
361 duart1: serial@21c0600 {
362 compatible = "fsl,ns16550", "ns16550a";
363 reg = <0x00 0x21c0600 0x0 0x100>;
364 interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
365 clocks = <&clockgen 4 0>;
366 status = "disabled";
367 };
369 gpio0: gpio@2300000 {
370 compatible = "fsl,qoriq-gpio";
371 reg = <0x0 0x2300000 0x0 0x10000>;
372 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
373 gpio-controller;
374 #gpio-cells = <2>;
375 interrupt-controller;
376 #interrupt-cells = <2>;
377 };
379 gpio1: gpio@2310000 {
380 compatible = "fsl,qoriq-gpio";
381 reg = <0x0 0x2310000 0x0 0x10000>;
382 interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
383 gpio-controller;
384 #gpio-cells = <2>;
385 interrupt-controller;
386 #interrupt-cells = <2>;
387 };
389 wdog0: wdog@2ad0000 {
390 compatible = "fsl,ls1012a-wdt",
391 "fsl,imx21-wdt";
392 reg = <0x0 0x2ad0000 0x0 0x10000>;
393 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
394 clocks = <&clockgen 4 0>;
395 big-endian;
396 };
398 sai1: sai@2b50000 {
399 #sound-dai-cells = <0>;
400 compatible = "fsl,vf610-sai";
401 reg = <0x0 0x2b50000 0x0 0x10000>;
402 interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
403 clocks = <&clockgen 4 3>, <&clockgen 4 3>,
404 <&clockgen 4 3>, <&clockgen 4 3>;
405 clock-names = "bus", "mclk1", "mclk2", "mclk3";
406 dma-names = "tx", "rx";
407 dmas = <&edma0 1 47>,
408 <&edma0 1 46>;
409 status = "disabled";
410 };
412 sai2: sai@2b60000 {
413 #sound-dai-cells = <0>;
414 compatible = "fsl,vf610-sai";
415 reg = <0x0 0x2b60000 0x0 0x10000>;
416 interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
417 clocks = <&clockgen 4 3>, <&clockgen 4 3>,
418 <&clockgen 4 3>, <&clockgen 4 3>;
419 clock-names = "bus", "mclk1", "mclk2", "mclk3";
420 dma-names = "tx", "rx";
421 dmas = <&edma0 1 45>,
422 <&edma0 1 44>;
423 status = "disabled";
424 };
426 edma0: edma@2c00000 {
427 #dma-cells = <2>;
428 compatible = "fsl,vf610-edma";
429 reg = <0x0 0x2c00000 0x0 0x10000>,
430 <0x0 0x2c10000 0x0 0x10000>,
431 <0x0 0x2c20000 0x0 0x10000>;
432 interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
433 <0 103 IRQ_TYPE_LEVEL_HIGH>;
434 interrupt-names = "edma-tx", "edma-err";
435 dma-channels = <32>;
436 big-endian;
437 clock-names = "dmamux0", "dmamux1";
438 clocks = <&clockgen 4 3>,
439 <&clockgen 4 3>;
440 };
442 usb0: usb3@2f00000 {
443 compatible = "snps,dwc3";
444 reg = <0x0 0x2f00000 0x0 0x10000>;
445 interrupts = <0 60 0x4>;
446 dr_mode = "host";
447 snps,quirk-frame-length-adjustment = <0x20>;
448 snps,dis_rxdet_inp3_quirk;
449 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
450 };
452 sata: sata@3200000 {
453 compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
454 reg = <0x0 0x3200000 0x0 0x10000>,
455 <0x0 0x20140520 0x0 0x4>;
456 reg-names = "ahci", "sata-ecc";
457 interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
458 clocks = <&clockgen 4 0>;
459 dma-coherent;
460 status = "disabled";
461 };
463 usb1: usb2@8600000 {
464 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
465 reg = <0x0 0x8600000 0x0 0x1000>;
466 interrupts = <0 139 0x4>;
467 dr_mode = "host";
468 phy_type = "ulpi";
469 };
471 msi: msi-controller1@1572000 {
472 compatible = "fsl,ls1012a-msi";
473 reg = <0x0 0x1572000 0x0 0x8>;
474 msi-controller;
475 interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
476 };
478 pcie: pcie@3400000 {
479 compatible = "fsl,ls1012a-pcie";
480 reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
481 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
482 reg-names = "regs", "config";
483 interrupts = <0 118 0x4>, /* controller interrupt */
484 <0 117 0x4>; /* PME interrupt */
485 interrupt-names = "aer", "pme";
486 #address-cells = <3>;
487 #size-cells = <2>;
488 device_type = "pci";
489 num-lanes = <4>;
490 num-viewport = <2>;
491 bus-range = <0x0 0xff>;
492 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
493 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
494 msi-parent = <&msi>;
495 #interrupt-cells = <1>;
496 interrupt-map-mask = <0 0 0 7>;
497 interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
498 <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
499 <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
500 <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
501 status = "disabled";
502 };
503 };
505 firmware {
506 optee {
507 compatible = "linaro,optee-tz";
508 method = "smc";
509 };
510 };
511 };