1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree Include file for NXP Layerscape-1088A family SoC.
7 * Harninder Rai <harninder.rai@nxp.com>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/thermal/thermal.h>
14 compatible = "fsl,ls1088a";
15 interrupt-parent = <&gic>;
27 /* We have 2 clusters having 4 Cortex-A53 cores each */
30 compatible = "arm,cortex-a53";
32 clocks = <&clockgen 1 0>;
33 cpu-idle-states = <&CPU_PH20>;
39 compatible = "arm,cortex-a53";
41 clocks = <&clockgen 1 0>;
42 cpu-idle-states = <&CPU_PH20>;
48 compatible = "arm,cortex-a53";
50 clocks = <&clockgen 1 0>;
51 cpu-idle-states = <&CPU_PH20>;
57 compatible = "arm,cortex-a53";
59 clocks = <&clockgen 1 0>;
60 cpu-idle-states = <&CPU_PH20>;
66 compatible = "arm,cortex-a53";
68 clocks = <&clockgen 1 1>;
69 cpu-idle-states = <&CPU_PH20>;
75 compatible = "arm,cortex-a53";
77 clocks = <&clockgen 1 1>;
78 cpu-idle-states = <&CPU_PH20>;
84 compatible = "arm,cortex-a53";
86 clocks = <&clockgen 1 1>;
87 cpu-idle-states = <&CPU_PH20>;
93 compatible = "arm,cortex-a53";
95 clocks = <&clockgen 1 1>;
96 cpu-idle-states = <&CPU_PH20>;
101 compatible = "arm,idle-state";
102 idle-state-name = "PH20";
103 arm,psci-suspend-param = <0x0>;
104 entry-latency-us = <1000>;
105 exit-latency-us = <1000>;
106 min-residency-us = <3000>;
110 gic: interrupt-controller@6000000 {
111 compatible = "arm,gic-v3";
112 #interrupt-cells = <3>;
113 interrupt-controller;
114 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
115 <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
116 <0x0 0x0c0c0000 0 0x2000>, /* GICC */
117 <0x0 0x0c0d0000 0 0x1000>, /* GICH */
118 <0x0 0x0c0e0000 0 0x20000>; /* GICV */
119 interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
120 #address-cells = <2>;
124 its: gic-its@6020000 {
125 compatible = "arm,gic-v3-its";
127 reg = <0x0 0x6020000 0 0x20000>;
132 cpu_thermal: cpu-thermal {
133 polling-delay-passive = <1000>;
134 polling-delay = <5000>;
135 thermal-sensors = <&tmu 0>;
138 cpu_alert: cpu-alert {
139 temperature = <85000>;
145 temperature = <95000>;
155 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
156 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
157 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
158 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
159 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
160 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
161 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
162 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
169 compatible = "arm,armv8-timer";
170 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
171 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
172 <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
173 <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
177 compatible = "arm,psci-0.2";
182 compatible = "fixed-clock";
184 clock-frequency = <100000000>;
185 clock-output-names = "sysclk";
189 compatible = "simple-bus";
190 #address-cells = <2>;
193 dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
195 clockgen: clocking@1300000 {
196 compatible = "fsl,ls1088a-clockgen";
197 reg = <0 0x1300000 0 0xa0000>;
203 compatible = "fsl,ls1088a-dcfg", "syscon";
204 reg = <0x0 0x1e00000 0x0 0x10000>;
209 compatible = "fsl,qoriq-tmu";
210 reg = <0x0 0x1f80000 0x0 0x10000>;
211 interrupts = <0 23 0x4>;
212 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
213 fsl,tmu-calibration =
214 /* Calibration data group 1 */
215 <0x00000000 0x00000026
216 0x00000001 0x0000002d
217 0x00000002 0x00000032
218 0x00000003 0x00000039
219 0x00000004 0x0000003f
220 0x00000005 0x00000046
221 0x00000006 0x0000004d
222 0x00000007 0x00000054
223 0x00000008 0x0000005a
224 0x00000009 0x00000061
225 0x0000000a 0x0000006a
226 0x0000000b 0x00000071
227 /* Calibration data group 2 */
228 0x00010000 0x00000025
229 0x00010001 0x0000002c
230 0x00010002 0x00000035
231 0x00010003 0x0000003d
232 0x00010004 0x00000045
233 0x00010005 0x0000004e
234 0x00010006 0x00000057
235 0x00010007 0x00000061
236 0x00010008 0x0000006b
237 0x00010009 0x00000076
238 /* Calibration data group 3 */
239 0x00020000 0x00000029
240 0x00020001 0x00000033
241 0x00020002 0x0000003d
242 0x00020003 0x00000049
243 0x00020004 0x00000056
244 0x00020005 0x00000061
245 0x00020006 0x0000006d
246 /* Calibration data group 4 */
247 0x00030000 0x00000021
248 0x00030001 0x0000002a
249 0x00030002 0x0000003c
250 0x00030003 0x0000004e>;
252 #thermal-sensor-cells = <1>;
255 duart0: serial@21c0500 {
256 compatible = "fsl,ns16550", "ns16550a";
257 reg = <0x0 0x21c0500 0x0 0x100>;
258 clocks = <&clockgen 4 3>;
259 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
263 duart1: serial@21c0600 {
264 compatible = "fsl,ns16550", "ns16550a";
265 reg = <0x0 0x21c0600 0x0 0x100>;
266 clocks = <&clockgen 4 3>;
267 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
271 gpio0: gpio@2300000 {
272 compatible = "fsl,qoriq-gpio";
273 reg = <0x0 0x2300000 0x0 0x10000>;
274 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
277 interrupt-controller;
278 #interrupt-cells = <2>;
281 gpio1: gpio@2310000 {
282 compatible = "fsl,qoriq-gpio";
283 reg = <0x0 0x2310000 0x0 0x10000>;
284 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
287 interrupt-controller;
288 #interrupt-cells = <2>;
291 gpio2: gpio@2320000 {
292 compatible = "fsl,qoriq-gpio";
293 reg = <0x0 0x2320000 0x0 0x10000>;
294 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
297 interrupt-controller;
298 #interrupt-cells = <2>;
301 gpio3: gpio@2330000 {
302 compatible = "fsl,qoriq-gpio";
303 reg = <0x0 0x2330000 0x0 0x10000>;
304 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
307 interrupt-controller;
308 #interrupt-cells = <2>;
312 compatible = "fsl,ifc", "simple-bus";
313 reg = <0x0 0x2240000 0x0 0x20000>;
314 interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
316 #address-cells = <2>;
322 compatible = "fsl,vf610-i2c";
323 #address-cells = <1>;
325 reg = <0x0 0x2000000 0x0 0x10000>;
326 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
327 clocks = <&clockgen 4 3>;
332 compatible = "fsl,vf610-i2c";
333 #address-cells = <1>;
335 reg = <0x0 0x2010000 0x0 0x10000>;
336 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
337 clocks = <&clockgen 4 3>;
342 compatible = "fsl,vf610-i2c";
343 #address-cells = <1>;
345 reg = <0x0 0x2020000 0x0 0x10000>;
346 interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
347 clocks = <&clockgen 4 3>;
352 compatible = "fsl,vf610-i2c";
353 #address-cells = <1>;
355 reg = <0x0 0x2030000 0x0 0x10000>;
356 interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
357 clocks = <&clockgen 4 3>;
361 esdhc: esdhc@2140000 {
362 compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
363 reg = <0x0 0x2140000 0x0 0x10000>;
364 interrupts = <0 28 0x4>; /* Level high type */
365 clock-frequency = <0>;
366 voltage-ranges = <1800 1800 3300 3300>;
374 compatible = "snps,dwc3";
375 reg = <0x0 0x3100000 0x0 0x10000>;
376 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
378 snps,quirk-frame-length-adjustment = <0x20>;
379 snps,dis_rxdet_inp3_quirk;
380 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
385 compatible = "snps,dwc3";
386 reg = <0x0 0x3110000 0x0 0x10000>;
387 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
389 snps,quirk-frame-length-adjustment = <0x20>;
390 snps,dis_rxdet_inp3_quirk;
395 compatible = "fsl,ls1088a-ahci";
396 reg = <0x0 0x3200000 0x0 0x10000>,
397 <0x7 0x100520 0x0 0x4>;
398 reg-names = "ahci", "sata-ecc";
399 interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
400 clocks = <&clockgen 4 3>;
405 crypto: crypto@8000000 {
406 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
408 #address-cells = <1>;
410 ranges = <0x0 0x00 0x8000000 0x100000>;
411 reg = <0x00 0x8000000 0x0 0x100000>;
412 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
416 compatible = "fsl,sec-v5.0-job-ring",
417 "fsl,sec-v4.0-job-ring";
418 reg = <0x10000 0x10000>;
419 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
423 compatible = "fsl,sec-v5.0-job-ring",
424 "fsl,sec-v4.0-job-ring";
425 reg = <0x20000 0x10000>;
426 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
430 compatible = "fsl,sec-v5.0-job-ring",
431 "fsl,sec-v4.0-job-ring";
432 reg = <0x30000 0x10000>;
433 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
437 compatible = "fsl,sec-v5.0-job-ring",
438 "fsl,sec-v4.0-job-ring";
439 reg = <0x40000 0x10000>;
440 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
445 compatible = "fsl,ls1088a-pcie";
446 reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
447 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
448 reg-names = "regs", "config";
449 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
450 interrupt-names = "aer";
451 #address-cells = <3>;
456 num-viewport = <256>;
457 bus-range = <0x0 0xff>;
458 ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
459 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
461 #interrupt-cells = <1>;
462 interrupt-map-mask = <0 0 0 7>;
463 interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
464 <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
465 <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
466 <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
471 compatible = "fsl,ls1088a-pcie";
472 reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
473 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
474 reg-names = "regs", "config";
475 interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
476 interrupt-names = "aer";
477 #address-cells = <3>;
483 bus-range = <0x0 0xff>;
484 ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
485 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
487 #interrupt-cells = <1>;
488 interrupt-map-mask = <0 0 0 7>;
489 interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
490 <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
491 <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
492 <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
497 compatible = "fsl,ls1088a-pcie";
498 reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
499 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
500 reg-names = "regs", "config";
501 interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
502 interrupt-names = "aer";
503 #address-cells = <3>;
509 bus-range = <0x0 0xff>;
510 ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
511 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
513 #interrupt-cells = <1>;
514 interrupt-map-mask = <0 0 0 7>;
515 interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
516 <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
517 <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
518 <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
522 smmu: iommu@5000000 {
523 compatible = "arm,mmu-500";
524 reg = <0 0x5000000 0 0x800000>;
526 stream-match-mask = <0x7C00>;
527 #global-interrupts = <12>;
528 // global secure fault
529 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
531 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
532 // global non-secure fault
533 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
534 // combined non-secure
535 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
536 // performance counter interrupts 0-7
537 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
538 <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
539 <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
540 <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
541 <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
542 <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
543 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
545 // per context interrupt, 64 interrupts
546 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
547 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
548 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
549 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
550 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
551 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
552 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
553 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
554 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
555 <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
556 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
557 <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
558 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
559 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
560 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
561 <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
562 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
563 <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
564 <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
565 <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
566 <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
567 <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
568 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
569 <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
570 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
571 <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
572 <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
573 <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
574 <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
575 <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
576 <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
577 <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
578 <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
579 <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
580 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
581 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
582 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
583 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
584 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
585 <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
586 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
587 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
588 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
589 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
590 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
591 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
595 <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
596 <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
597 <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
598 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
599 <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
600 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
601 <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
602 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
603 <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
604 <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
605 <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
606 <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
607 <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
608 <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
609 <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
613 compatible = "fsl,dpaa2-ptp";
614 reg = <0x0 0x8b95000 0x0 0x100>;
615 clocks = <&clockgen 4 0>;
620 cluster1_core0_watchdog: wdt@c000000 {
621 compatible = "arm,sp805-wdt", "arm,primecell";
622 reg = <0x0 0xc000000 0x0 0x1000>;
623 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
624 clock-names = "apb_pclk", "wdog_clk";
627 cluster1_core1_watchdog: wdt@c010000 {
628 compatible = "arm,sp805-wdt", "arm,primecell";
629 reg = <0x0 0xc010000 0x0 0x1000>;
630 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
631 clock-names = "apb_pclk", "wdog_clk";
634 cluster1_core2_watchdog: wdt@c020000 {
635 compatible = "arm,sp805-wdt", "arm,primecell";
636 reg = <0x0 0xc020000 0x0 0x1000>;
637 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
638 clock-names = "apb_pclk", "wdog_clk";
641 cluster1_core3_watchdog: wdt@c030000 {
642 compatible = "arm,sp805-wdt", "arm,primecell";
643 reg = <0x0 0xc030000 0x0 0x1000>;
644 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
645 clock-names = "apb_pclk", "wdog_clk";
648 cluster2_core0_watchdog: wdt@c100000 {
649 compatible = "arm,sp805-wdt", "arm,primecell";
650 reg = <0x0 0xc100000 0x0 0x1000>;
651 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
652 clock-names = "apb_pclk", "wdog_clk";
655 cluster2_core1_watchdog: wdt@c110000 {
656 compatible = "arm,sp805-wdt", "arm,primecell";
657 reg = <0x0 0xc110000 0x0 0x1000>;
658 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
659 clock-names = "apb_pclk", "wdog_clk";
662 cluster2_core2_watchdog: wdt@c120000 {
663 compatible = "arm,sp805-wdt", "arm,primecell";
664 reg = <0x0 0xc120000 0x0 0x1000>;
665 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
666 clock-names = "apb_pclk", "wdog_clk";
669 cluster2_core3_watchdog: wdt@c130000 {
670 compatible = "arm,sp805-wdt", "arm,primecell";
671 reg = <0x0 0xc130000 0x0 0x1000>;
672 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
673 clock-names = "apb_pclk", "wdog_clk";
676 fsl_mc: fsl-mc@80c000000 {
677 compatible = "fsl,qoriq-mc";
678 reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
679 <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
681 iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
683 #address-cells = <3>;
687 * Region type 0x0 - MC portals
688 * Region type 0x1 - QBMAN portals
690 ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
691 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
694 #address-cells = <1>;
698 compatible = "fsl,qoriq-mc-dpmac";
703 compatible = "fsl,qoriq-mc-dpmac";
708 compatible = "fsl,qoriq-mc-dpmac";
713 compatible = "fsl,qoriq-mc-dpmac";
718 compatible = "fsl,qoriq-mc-dpmac";
723 compatible = "fsl,qoriq-mc-dpmac";
728 compatible = "fsl,qoriq-mc-dpmac";
733 compatible = "fsl,qoriq-mc-dpmac";
738 compatible = "fsl,qoriq-mc-dpmac";
743 compatible = "fsl,qoriq-mc-dpmac";
752 compatible = "linaro,optee-tz";