arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for Freescale LS2080A RDB Board.
   4  *
   5  * Copyright 2016 Freescale Semiconductor, Inc.
   6  * Copyright 2017 NXP
   7  *
   8  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
   9  *
  10  */
  11
  12 &esdhc {
  13         status = "okay";
  14 };
  15
  16 &ifc {
  17         status = "okay";
  18         #address-cells = <2>;
  19         #size-cells = <1>;
  20         ranges = <0x0 0x0 0x5 0x80000000 0x08000000
  21                   0x2 0x0 0x5 0x30000000 0x00010000
  22                   0x3 0x0 0x5 0x20000000 0x00010000>;
  23
  24         nor@0,0 {
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27                 compatible = "cfi-flash";
  28                 reg = <0x0 0x0 0x8000000>;
  29                 bank-width = <2>;
  30                 device-width = <1>;
  31         };
  32
  33         nand@2,0 {
  34              compatible = "fsl,ifc-nand";
  35              reg = <0x2 0x0 0x10000>;
  36         };
  37
  38         cpld@3,0 {
  39              reg = <0x3 0x0 0x10000>;
  40              compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
  41         };
  42
  43 };
  44
  45 &i2c0 {
  46         status = "okay";
  47         pca9547@75 {
  48                 compatible = "nxp,pca9547";
  49                 reg = <0x75>;
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 i2c@1 {
  53                         #address-cells = <1>;
  54                         #size-cells = <0>;
  55                         reg = <0x01>;
  56                         rtc@68 {
  57                                 compatible = "dallas,ds3232";
  58                                 reg = <0x68>;
  59                         };
  60                 };
  61
  62                 i2c@2 {
  63                         #address-cells = <1>;
  64                         #size-cells = <0>;
  65                         reg = <0x02>;
  66
  67                         ina220@40 {
  68                                 compatible = "ti,ina220";
  69                                 reg = <0x40>;
  70                                 shunt-resistor = <500>;
  71                         };
  72                 };
  73
  74                 i2c@3 {
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77                         reg = <0x3>;
  78
  79                         adt7481@4c {
  80                                 compatible = "adi,adt7461";
  81                                 reg = <0x4c>;
  82                         };
  83                 };
  84         };
  85 };
  86
  87 &i2c1 {
  88         status = "disabled";
  89 };
  90
  91 &i2c2 {
  92         status = "disabled";
  93 };
  94
  95 &i2c3 {
  96         status = "disabled";
  97 };
  98
  99 &dspi {
 100         status = "okay";
 101         dflash0: n25q512a@0 {
 102                 #address-cells = <1>;
 103                 #size-cells = <1>;
 104                 compatible = "st,m25p80";
 105                 spi-max-frequency = <3000000>;
 106                 reg = <0>;
 107         };
 108 };
 109
 110 &qspi {
 111         status = "disabled";
 112 };
 113
 114 &sata0 {
 115         status = "okay";
 116 };
 117
 118 &sata1 {
 119         status = "okay";
 120 };
 121
 122 &usb0 {
 123         status = "okay";
 124 };
 125
 126 &usb1 {
 127         status = "okay";
 128 };