staging: rtl8192u: remove redundant assignment to pointer crypt
[linux/fpc-iii.git] / arch / arm64 / boot / dts / freescale / imx8mq-librem5-devkit.dts
blob5179e22f5126a7d6c140f47fbaa8d21dbe0ea8a0
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2018-2019 Purism SPC
4  */
6 /dts-v1/;
8 #include "dt-bindings/input/input.h"
9 #include "dt-bindings/pwm/pwm.h"
10 #include "dt-bindings/usb/pd.h"
11 #include "imx8mq.dtsi"
13 / {
14         model = "Purism Librem 5 devkit";
15         compatible = "purism,librem5-devkit", "fsl,imx8mq";
17         backlight_dsi: backlight-dsi {
18                 compatible = "pwm-backlight";
19                 /* 200 Hz for the PAM2841 */
20                 pwms = <&pwm1 0 5000000>;
21                 brightness-levels = <0 100>;
22                 num-interpolated-steps = <100>;
23                 /* Default brightness level (index into the array defined by */
24                 /* the "brightness-levels" property) */
25                 default-brightness-level = <0>;
26                 power-supply = <&reg_22v4_p>;
27         };
29         chosen {
30                 stdout-path = &uart1;
31         };
33         gpio-keys {
34                 compatible = "gpio-keys";
35                 pinctrl-names = "default";
36                 pinctrl-0 = <&pinctrl_gpio_keys>;
38                 btn1 {
39                         label = "VOL_UP";
40                         gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
41                         wakeup-source;
42                         linux,code = <KEY_VOLUMEUP>;
43                 };
45                 btn2 {
46                         label = "VOL_DOWN";
47                         gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
48                         wakeup-source;
49                         linux,code = <KEY_VOLUMEDOWN>;
50                 };
52                 hp-det {
53                         label = "HP_DET";
54                         gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
55                         wakeup-source;
56                         linux,code = <KEY_HP>;
57                 };
58         };
60         leds {
61                 compatible = "gpio-leds";
62                 pinctrl-names = "default";
63                 pinctrl-0 = <&pinctrl_gpio_leds>;
65                 led1 {
66                         label = "LED 1";
67                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
68                         default-state = "off";
69                 };
70         };
72         pmic_osc: clock-pmic {
73                 compatible = "fixed-clock";
74                 #clock-cells = <0>;
75                 clock-frequency = <32768>;
76                 clock-output-names = "pmic_osc";
77         };
79         reg_1v8_p: regulator-1v8-p {
80                 compatible = "regulator-fixed";
81                 regulator-name = "1v8_p";
82                 regulator-min-microvolt = <1800000>;
83                 regulator-max-microvolt = <1800000>;
84                 vin-supply = <&reg_pwr_en>;
85         };
87         reg_2v8_p: regulator-2v8-p {
88                 compatible = "regulator-fixed";
89                 regulator-name = "2v8_p";
90                 regulator-min-microvolt = <2800000>;
91                 regulator-max-microvolt = <2800000>;
92                 vin-supply = <&reg_pwr_en>;
93         };
95         reg_3v3_p: regulator-3v3-p {
96                 compatible = "regulator-fixed";
97                 regulator-name = "3v3_p";
98                 regulator-min-microvolt = <3300000>;
99                 regulator-max-microvolt = <3300000>;
100                 vin-supply = <&reg_pwr_en>;
102                 regulator-state-mem {
103                         regulator-on-in-suspend;
104                 };
105         };
107         reg_5v_p: regulator-5v-p {
108                 compatible = "regulator-fixed";
109                 regulator-name = "5v_p";
110                 regulator-min-microvolt = <5000000>;
111                 regulator-max-microvolt = <5000000>;
112                 vin-supply = <&reg_pwr_en>;
114                 regulator-state-mem {
115                         regulator-on-in-suspend;
116                 };
117         };
119         reg_22v4_p: regulator-22v4-p  {
120                 compatible = "regulator-fixed";
121                 regulator-name = "22v4_P";
122                 regulator-min-microvolt = <22400000>;
123                 regulator-max-microvolt = <22400000>;
124                 vin-supply = <&reg_pwr_en>;
125         };
127         reg_pwr_en: regulator-pwr-en {
128                 compatible = "regulator-fixed";
129                 pinctrl-names = "default";
130                 pinctrl-0 = <&pinctrl_pwr_en>;
131                 regulator-name = "PWR_EN";
132                 regulator-min-microvolt = <3300000>;
133                 regulator-max-microvolt = <3300000>;
134                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
135                 enable-active-high;
136                 regulator-always-on;
137         };
139         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
140                 compatible = "regulator-fixed";
141                 pinctrl-names = "default";
142                 pinctrl-0 = <&pinctrl_usdhc2_pwr>;
143                 regulator-name = "VSD_3V3";
144                 regulator-min-microvolt = <3300000>;
145                 regulator-max-microvolt = <3300000>;
146                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
147                 enable-active-high;
148                 regulator-always-on;
149         };
151         vibrator {
152                 compatible = "gpio-vibrator";
153                 pinctrl-names = "default";
154                 pinctrl-0 = <&pinctrl_haptic>;
155                 enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
156                 vcc-supply = <&reg_3v3_p>;
157         };
159         wifi_pwr_en: regulator-wifi-en {
160                 compatible = "regulator-fixed";
161                 pinctrl-names = "default";
162                 pinctrl-0 = <&pinctrl_wifi_pwr_en>;
163                 regulator-name = "WIFI_EN";
164                 regulator-min-microvolt = <3300000>;
165                 regulator-max-microvolt = <3300000>;
166                 gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
167                 enable-active-high;
168                 regulator-always-on;
169         };
172 &clk {
173         assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
174         assigned-clock-rates = <786432000>, <722534400>;
177 &fec1 {
178         pinctrl-names = "default";
179         pinctrl-0 = <&pinctrl_fec1>;
180         phy-mode = "rgmii-id";
181         phy-handle = <&ethphy0>;
182         fsl,magic-packet;
183         phy-supply = <&reg_3v3_p>;
184         status = "okay";
186         mdio {
187                 #address-cells = <1>;
188                 #size-cells = <0>;
190                 ethphy0: ethernet-phy@1 {
191                         compatible = "ethernet-phy-ieee802.3-c22";
192                         reg = <1>;
193                 };
194         };
197 &i2c1 {
198         clock-frequency = <100000>;
199         pinctrl-names = "default";
200         pinctrl-0 = <&pinctrl_i2c1>;
201         status = "okay";
203         pmic: pmic@4b {
204                 compatible = "rohm,bd71837";
205                 reg = <0x4b>;
206                 pinctrl-names = "default";
207                 pinctrl-0 = <&pinctrl_pmic>;
208                 clocks = <&pmic_osc>;
209                 clock-names = "osc";
210                 clock-output-names = "pmic_clk";
211                 interrupt-parent = <&gpio1>;
212                 interrupts = <3 GPIO_ACTIVE_LOW>;
213                 interrupt-names = "irq";
214                 rohm,reset-snvs-powered;
216                 regulators {
217                         buck1_reg: BUCK1 {
218                                 regulator-name = "buck1";
219                                 regulator-min-microvolt = <700000>;
220                                 regulator-max-microvolt = <1300000>;
221                                 regulator-boot-on;
222                                 regulator-ramp-delay = <1250>;
223                                 rohm,dvs-run-voltage = <900000>;
224                                 rohm,dvs-idle-voltage = <850000>;
225                                 rohm,dvs-suspend-voltage = <800000>;
226                         };
228                         buck2_reg: BUCK2 {
229                                 regulator-name = "buck2";
230                                 regulator-min-microvolt = <700000>;
231                                 regulator-max-microvolt = <1300000>;
232                                 regulator-boot-on;
233                                 regulator-ramp-delay = <1250>;
234                                 rohm,dvs-run-voltage = <1000000>;
235                                 rohm,dvs-idle-voltage = <900000>;
236                         };
238                         buck3_reg: BUCK3 {
239                                 regulator-name = "buck3";
240                                 regulator-min-microvolt = <700000>;
241                                 regulator-max-microvolt = <1300000>;
242                                 regulator-boot-on;
243                                 rohm,dvs-run-voltage = <1000000>;
244                         };
246                         buck4_reg: BUCK4 {
247                                 regulator-name = "buck4";
248                                 regulator-min-microvolt = <700000>;
249                                 regulator-max-microvolt = <1300000>;
250                                 rohm,dvs-run-voltage = <1000000>;
251                         };
253                         buck5_reg: BUCK5 {
254                                 regulator-name = "buck5";
255                                 regulator-min-microvolt = <700000>;
256                                 regulator-max-microvolt = <1350000>;
257                                 regulator-boot-on;
258                         };
260                         buck6_reg: BUCK6 {
261                                 regulator-name = "buck6";
262                                 regulator-min-microvolt = <3000000>;
263                                 regulator-max-microvolt = <3300000>;
264                                 regulator-boot-on;
265                         };
267                         buck7_reg: BUCK7 {
268                                 regulator-name = "buck7";
269                                 regulator-min-microvolt = <1605000>;
270                                 regulator-max-microvolt = <1995000>;
271                                 regulator-boot-on;
272                         };
274                         buck8_reg: BUCK8 {
275                                 regulator-name = "buck8";
276                                 regulator-min-microvolt = <800000>;
277                                 regulator-max-microvolt = <1400000>;
278                                 regulator-boot-on;
279                         };
281                         ldo1_reg: LDO1 {
282                                 regulator-name = "ldo1";
283                                 regulator-min-microvolt = <3000000>;
284                                 regulator-max-microvolt = <3300000>;
285                                 regulator-boot-on;
286                                 /* leave on for snvs power button */
287                                 regulator-always-on;
288                         };
290                         ldo2_reg: LDO2 {
291                                 regulator-name = "ldo2";
292                                 regulator-min-microvolt = <900000>;
293                                 regulator-max-microvolt = <900000>;
294                                 regulator-boot-on;
295                                 /* leave on for snvs power button */
296                                 regulator-always-on;
297                         };
299                         ldo3_reg: LDO3 {
300                                 regulator-name = "ldo3";
301                                 regulator-min-microvolt = <1800000>;
302                                 regulator-max-microvolt = <3300000>;
303                                 regulator-boot-on;
304                         };
306                         ldo4_reg: LDO4 {
307                                 regulator-name = "ldo4";
308                                 regulator-min-microvolt = <900000>;
309                                 regulator-max-microvolt = <1800000>;
310                                 regulator-boot-on;
311                         };
313                         ldo5_reg: LDO5 {
314                                 regulator-name = "ldo5";
315                                 regulator-min-microvolt = <1800000>;
316                                 regulator-max-microvolt = <3300000>;
317                         };
319                         ldo6_reg: LDO6 {
320                                 regulator-name = "ldo6";
321                                 regulator-min-microvolt = <900000>;
322                                 regulator-max-microvolt = <1800000>;
323                                 regulator-boot-on;
324                         };
326                         ldo7_reg: LDO7 {
327                                 regulator-name = "ldo7";
328                                 regulator-min-microvolt = <1800000>;
329                                 regulator-max-microvolt = <3300000>;
330                                 regulator-boot-on;
331                         };
332                 };
333         };
335         typec_ptn5100: usb_typec@52 {
336                 compatible = "nxp,ptn5110";
337                 reg = <0x52>;
338                 pinctrl-names = "default";
339                 pinctrl-0 = <&pinctrl_typec>;
340                 interrupt-parent = <&gpio3>;
341                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
343                 connector {
344                         compatible = "usb-c-connector";
345                         label = "USB-C";
346                         data-role = "dual";
347                         power-role = "dual";
348                         try-power-role = "sink";
349                         source-pdos = <PDO_FIXED(5000, 2000,
350                                 PDO_FIXED_USB_COMM |
351                                 PDO_FIXED_DUAL_ROLE |
352                                 PDO_FIXED_DATA_SWAP )>;
353                         sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
354                                 PDO_FIXED_DUAL_ROLE |
355                                 PDO_FIXED_DATA_SWAP )
356                              PDO_VAR(5000, 3000, 3000)>;
357                         op-sink-microwatt = <10000000>;
359                         ports {
360                                 #address-cells = <1>;
361                                 #size-cells = <0>;
363                                 port@0 {
364                                         reg = <0>;
366                                         usb_con_hs: endpoint {
367                                                 remote-endpoint = <&typec_hs>;
368                                         };
369                                 };
371                                 port@1 {
372                                         reg = <1>;
374                                         usb_con_ss: endpoint {
375                                                 remote-endpoint = <&typec_ss>;
376                                         };
377                                 };
378                         };
379                 };
380         };
382         rtc@68 {
383                 compatible = "microcrystal,rv4162";
384                 reg = <0x68>;
385                 pinctrl-names = "default";
386                 pinctrl-0 = <&pinctrl_rtc>;
387                 interrupt-parent = <&gpio4>;
388                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
389         };
391         charger@6b { /* bq25896 */
392                 compatible = "ti,bq25890";
393                 reg = <0x6b>;
394                 pinctrl-names = "default";
395                 pinctrl-0 = <&pinctrl_charger>;
396                 interrupt-parent = <&gpio3>;
397                 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
398                 ti,battery-regulation-voltage = <4192000>; /* 4.192V */
399                 ti,charge-current = <1600000>; /* 1.6A */
400                 ti,termination-current = <66000>;  /* 66mA */
401                 ti,precharge-current = <130000>; /* 130mA */
402                 ti,minimum-sys-voltage = <3000000>; /* 3V */
403                 ti,boost-voltage = <5000000>; /* 5V */
404                 ti,boost-max-current = <50000>; /* 50mA */
405         };
408 &i2c3 {
409         clock-frequency = <100000>;
410         pinctrl-names = "default";
411         pinctrl-0 = <&pinctrl_i2c3>;
412         status = "okay";
414         magnetometer@1e {
415                 compatible = "st,lsm9ds1-magn";
416                 reg = <0x1e>;
417                 pinctrl-names = "default";
418                 pinctrl-0 = <&pinctrl_imu>;
419                 interrupt-parent = <&gpio3>;
420                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
421                 vdd-supply = <&reg_3v3_p>;
422                 vddio-supply = <&reg_3v3_p>;
423         };
425         touchscreen@5d {
426                 compatible = "goodix,gt5688";
427                 reg = <0x5d>;
428                 pinctrl-names = "default";
429                 pinctrl-0 = <&pinctrl_ts>;
430                 interrupt-parent = <&gpio3>;
431                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
432                 reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
433                 irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
434                 touchscreen-size-x = <720>;
435                 touchscreen-size-y = <1440>;
436                 AVDD28-supply = <&reg_2v8_p>;
437                 VDDIO-supply = <&reg_1v8_p>;
438         };
441 &iomuxc {
442         pinctrl_bl: blgrp {
443                 fsl,pins = <
444                         MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT        0x6 /* DSI_BL_PWM */
445                 >;
446         };
448         pinctrl_bt: btgrp {
449                 fsl,pins = <
450                         MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11     0x16 /* nBT_DISABLE */
451                         MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7      0x10 /* BT_HOST_WAKE */
452                 >;
453         };
455         pinctrl_charger: chargergrp {
456                 fsl,pins = <
457                         MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x80 /* CHRG_nINT */
458                 >;
459         };
461         pinctrl_fec1: fec1grp {
462                 fsl,pins = <
463                         MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
464                         MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
465                         MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
466                         MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
467                         MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
468                         MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
469                         MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
470                         MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
471                         MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
472                         MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
473                         MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
474                         MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
475                         MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
476                         MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
477                         MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9               0x19
478                         MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
479                 >;
480         };
482         pinctrl_ts: tsgrp {
483                 fsl,pins = <
484                         MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0         0x16  /* TOUCH INT */
485                         MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x19  /* TOUCH RST */
486                 >;
487         };
489         pinctrl_gpio_leds: gpioledgrp {
490                 fsl,pins = <
491                         MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x16
492                 >;
493         };
495         pinctrl_gpio_keys: gpiokeygrp {
496                 fsl,pins = <
497                         MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x16
498                         MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22        0x16
499                         MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0x180  /* HP_DET */
500                 >;
501         };
503         pinctrl_haptic: hapticgrp {
504                 fsl,pins = <
505                         MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4         0xc6   /* nHAPTIC */
506                 >;
507         };
509         pinctrl_i2c1: i2c1grp {
510                 fsl,pins = <
511                         MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x4000001f
512                         MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x4000001f
513                 >;
514         };
516         pinctrl_i2c3: i2c3grp {
517                 fsl,pins = <
518                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x4000001f
519                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x4000001f
520                 >;
521         };
523         pinctrl_imu: imugrp {
524                 fsl,pins = <
525                         MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19       0x8  /* IMU_INT */
526                 >;
527         };
529         pinctrl_pmic: pmicgrp {
530                 fsl,pins = <
531                         MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x80  /* PMIC intr */
532                 >;
533         };
535         pinctrl_pwr_en: pwrengrp {
536                 fsl,pins = <
537                         MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x06
538                 >;
539         };
541         pinctrl_rtc: rtcgrp {
542                 fsl,pins = <
543                         MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x80  /* RTC intr */
544                 >;
545         };
547         pinctrl_typec: typecgrp {
548                 fsl,pins = <
549                         MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12             0x16
550                         MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1               0x80
551                 >;
552         };
554         pinctrl_uart1: uart1grp {
555                 fsl,pins = <
556                         MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
557                         MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
558                 >;
559         };
561         pinctrl_uart2: uart2grp {
562                 fsl,pins = <
563                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX             0x49
564                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX             0x49
565                         MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B          0x49
566                         MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B          0x49
567                 >;
568         };
570         pinctrl_uart3: uart3grp {
571                 fsl,pins = <
572                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX             0x49
573                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX             0x49
574                 >;
575         };
577         pinctrl_uart4: uart4grp {
578                 fsl,pins = <
579                         MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
580                         MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
581                         MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
582                         MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
583                         MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x49
584                 >;
585         };
587         pinctrl_usdhc1: usdhc1grp {
588                 fsl,pins = <
589                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
590                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
591                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
592                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
593                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
594                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
595                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
596                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
597                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
598                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
599                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
600                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
601                 >;
602         };
604         pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
605                 fsl,pins = <
606                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
607                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
608                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
609                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
610                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
611                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
612                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
613                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
614                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
615                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
616                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
617                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
618                 >;
619         };
621         pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
622                 fsl,pins = <
623                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
624                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
625                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
626                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
627                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
628                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
629                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
630                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
631                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
632                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
633                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
634                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
635                 >;
636         };
638         pinctrl_usdhc2_pwr: usdhc2grppwr {
639                 fsl,pins = <
640                         MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
641                 >;
642         };
644         pinctrl_usdhc2_gpio: usdhc2grpgpio {
645                 fsl,pins = <
646                         MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20          0x80 /* WIFI_WAKE */
647                 >;
648         };
650         pinctrl_usdhc2: usdhc2grp {
651                 fsl,pins = <
652                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x83
653                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xc3
654                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xc3
655                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xc3
656                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xc3
657                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xc3
658                 >;
659         };
661         pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
662                 fsl,pins = <
663                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x8d
664                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcd
665                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcd
666                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcd
667                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcd
668                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcd
669                 >;
670         };
672         pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
673                 fsl,pins = <
674                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x9f
675                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcf
676                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcf
677                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcf
678                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcf
679                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcf
680                 >;
681         };
683         pinctrl_wdog: wdoggrp {
684                 fsl,pins = <
685                         MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
686                 >;
687         };
689         pinctrl_wifi_pwr_en: wifipwrengrp {
690                 fsl,pins = <
691                         MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5         0x06
692                 >;
693         };
695         pinctrl_wwan: wwangrp {
696                 fsl,pins = <
697                         MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4       0x09 /* nWWAN_DISABLE */
698                         MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80 /* nWoWWAN */
699                         MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x19 /* WWAN_RESET */
700                 >;
701         };
704 &pgc_gpu {
705         power-supply = <&buck3_reg>;
708 &pgc_vpu {
709         power-supply = <&buck4_reg>;
712 &pwm1 {
713         pinctrl-names = "default";
714         pinctrl-0 = <&pinctrl_bl>;
715         status = "okay";
718 &snvs_pwrkey {
719         status = "okay";
722 &uart1 { /* console */
723         pinctrl-names = "default";
724         pinctrl-0 = <&pinctrl_uart1>;
725         status = "okay";
728 &uart3 { /* GNSS */
729         pinctrl-names = "default";
730         pinctrl-0 = <&pinctrl_uart3>;
731         status = "okay";
734 &uart4 { /* BT */
735         pinctrl-names = "default";
736         pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
737         uart-has-rtscts;
738         status = "okay";
741 &usb3_phy0 {
742         status = "okay";
745 &usb3_phy1 {
746         vbus-supply = <&reg_5v_p>;
747         status = "okay";
750 &usb_dwc3_0 {
751         #address-cells = <1>;
752         #size-cells = <0>;
753         dr_mode = "otg";
754         status = "okay";
756         port@0 {
757                 reg = <0>;
759                 typec_hs: endpoint {
760                         remote-endpoint = <&usb_con_hs>;
761                 };
762         };
764         port@1 {
765                 reg = <1>;
767                 typec_ss: endpoint {
768                         remote-endpoint = <&usb_con_ss>;
769                 };
770         };
773 &usb_dwc3_1 {
774         dr_mode = "host";
775         status = "okay";
778 &usdhc1 {
779         pinctrl-names = "default", "state_100mhz", "state_200mhz";
780         pinctrl-0 = <&pinctrl_usdhc1>;
781         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
782         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
783         bus-width = <8>;
784         non-removable;
785         status = "okay";
788 &usdhc2 {
789         pinctrl-names = "default", "state_100mhz", "state_200mhz";
790         pinctrl-0 = <&pinctrl_usdhc2>;
791         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
792         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
793         bus-width = <4>;
794         vmmc-supply = <&reg_usdhc2_vmmc>;
795         power-supply = <&wifi_pwr_en>;
796         non-removable;
797         disable-wp;
798         cap-sdio-irq;
799         keep-power-in-suspend;
800         wakeup-source;
801         status = "okay";
804 &wdog1 {
805         pinctrl-names = "default";
806         pinctrl-0 = <&pinctrl_wdog>;
807         fsl,ext-reset-output;
808         status = "okay";