staging: rtl8192u: remove redundant assignment to pointer crypt
[linux/fpc-iii.git] / arch / arm64 / boot / dts / lg / lg1313.dtsi
blob82c6645b58b7743641e4ac430605baee2b7afc19
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * dts file for lg1313 SoC
4  *
5  * Copyright (C) 2016, LG Electronics
6  */
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 / {
12         #address-cells = <2>;
13         #size-cells = <2>;
15         compatible = "lge,lg1313";
16         interrupt-parent = <&gic>;
18         cpus {
19                 #address-cells = <2>;
20                 #size-cells = <0>;
22                 cpu0: cpu@0 {
23                         device_type = "cpu";
24                         compatible = "arm,cortex-a53";
25                         reg = <0x0 0x0>;
26                         next-level-cache = <&L2_0>;
27                 };
28                 cpu1: cpu@1 {
29                         device_type = "cpu";
30                         compatible = "arm,cortex-a53";
31                         reg = <0x0 0x1>;
32                         enable-method = "psci";
33                         next-level-cache = <&L2_0>;
34                 };
35                 cpu2: cpu@2 {
36                         device_type = "cpu";
37                         compatible = "arm,cortex-a53";
38                         reg = <0x0 0x2>;
39                         enable-method = "psci";
40                         next-level-cache = <&L2_0>;
41                 };
42                 cpu3: cpu@3 {
43                         device_type = "cpu";
44                         compatible = "arm,cortex-a53";
45                         reg = <0x0 0x3>;
46                         enable-method = "psci";
47                         next-level-cache = <&L2_0>;
48                 };
49                 L2_0: l2-cache0 {
50                         compatible = "cache";
51                 };
52         };
54         psci {
55                 compatible  = "arm,psci-0.2", "arm,psci";
56                 method = "smc";
57                 cpu_suspend = <0x84000001>;
58                 cpu_off = <0x84000002>;
59                 cpu_on = <0x84000003>;
60         };
62         gic: interrupt-controller@c0001000 {
63                 #interrupt-cells = <3>;
64                 compatible = "arm,gic-400";
65                 interrupt-controller;
66                 reg = <0x0 0xc0001000 0x1000>,
67                       <0x0 0xc0002000 0x2000>,
68                       <0x0 0xc0004000 0x2000>,
69                       <0x0 0xc0006000 0x2000>;
70         };
72         pmu {
73                 compatible = "arm,cortex-a53-pmu";
74                 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
75                              <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
76                              <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
77                              <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
78                 interrupt-affinity = <&cpu0>,
79                                      <&cpu1>,
80                                      <&cpu2>,
81                                      <&cpu3>;
82         };
84         timer {
85                 compatible = "arm,armv8-timer";
86                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
87                               IRQ_TYPE_LEVEL_LOW)>,
88                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
89                               IRQ_TYPE_LEVEL_LOW)>,
90                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
91                               IRQ_TYPE_LEVEL_LOW)>,
92                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
93                               IRQ_TYPE_LEVEL_LOW)>;
94         };
96         clk_bus: clk_bus {
97                 #clock-cells = <0>;
99                 compatible = "fixed-clock";
100                 clock-frequency = <198000000>;
101                 clock-output-names = "BUSCLK";
102         };
104         soc {
105                 #address-cells = <2>;
106                 #size-cells = <1>;
108                 compatible = "simple-bus";
109                 interrupt-parent = <&gic>;
110                 ranges;
112                 eth0: ethernet@c3700000 {
113                         compatible = "cdns,gem";
114                         reg = <0x0 0xc3700000 0x1000>;
115                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
116                         clocks = <&clk_bus>, <&clk_bus>;
117                         clock-names = "hclk", "pclk";
118                         phy-mode = "rmii";
119                         /* Filled in by boot */
120                         mac-address = [ 00 00 00 00 00 00 ];
121                 };
122         };
124         amba {
125                 #address-cells = <2>;
126                 #size-cells = <1>;
127                 #interrupts-cells = <3>;
129                 compatible = "simple-bus";
130                 interrupt-parent = <&gic>;
131                 ranges;
133                 timers: timer@fd100000 {
134                         compatible = "arm,sp804";
135                         reg = <0x0 0xfd100000 0x1000>;
136                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
137                         clocks = <&clk_bus>;
138                         clock-names = "apb_pclk";
139                 };
140                 wdog: watchdog@fd200000 {
141                         compatible = "arm,sp805", "arm,primecell";
142                         reg = <0x0 0xfd200000 0x1000>;
143                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
144                         clocks = <&clk_bus>;
145                         clock-names = "apb_pclk";
146                 };
147                 uart0: serial@fe000000 {
148                         compatible = "arm,pl011", "arm,primecell";
149                         reg = <0x0 0xfe000000 0x1000>;
150                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
151                         clocks = <&clk_bus>;
152                         clock-names = "apb_pclk";
153                         status="disabled";
154                 };
155                 uart1: serial@fe100000 {
156                         compatible = "arm,pl011", "arm,primecell";
157                         reg = <0x0 0xfe100000 0x1000>;
158                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
159                         clocks = <&clk_bus>;
160                         clock-names = "apb_pclk";
161                         status="disabled";
162                 };
163                 uart2: serial@fe200000 {
164                         compatible = "arm,pl011", "arm,primecell";
165                         reg = <0x0 0xfe200000 0x1000>;
166                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
167                         clocks = <&clk_bus>;
168                         clock-names = "apb_pclk";
169                         status="disabled";
170                 };
171                 spi0: spi@fe800000 {
172                         compatible = "arm,pl022", "arm,primecell";
173                         reg = <0x0 0xfe800000 0x1000>;
174                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
175                         clocks = <&clk_bus>;
176                         clock-names = "apb_pclk";
177                 };
178                 spi1: spi@fe900000 {
179                         compatible = "arm,pl022", "arm,primecell";
180                         reg = <0x0 0xfe900000 0x1000>;
181                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
182                         clocks = <&clk_bus>;
183                         clock-names = "apb_pclk";
184                 };
185                 dmac0: dma@c1128000 {
186                         compatible = "arm,pl330", "arm,primecell";
187                         reg = <0x0 0xc1128000 0x1000>;
188                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
189                         clocks = <&clk_bus>;
190                         clock-names = "apb_pclk";
191                 };
192                 gpio0: gpio@fd400000 {
193                         #gpio-cells = <2>;
194                         compatible = "arm,pl061", "arm,primecell";
195                         gpio-controller;
196                         reg = <0x0 0xfd400000 0x1000>;
197                         clocks = <&clk_bus>;
198                         clock-names = "apb_pclk";
199                         status="disabled";
200                 };
201                 gpio1: gpio@fd410000 {
202                         #gpio-cells = <2>;
203                         compatible = "arm,pl061", "arm,primecell";
204                         gpio-controller;
205                         reg = <0x0 0xfd410000 0x1000>;
206                         clocks = <&clk_bus>;
207                         clock-names = "apb_pclk";
208                         status="disabled";
209                 };
210                 gpio2: gpio@fd420000 {
211                         #gpio-cells = <2>;
212                         compatible = "arm,pl061", "arm,primecell";
213                         gpio-controller;
214                         reg = <0x0 0xfd420000 0x1000>;
215                         clocks = <&clk_bus>;
216                         clock-names = "apb_pclk";
217                         status="disabled";
218                 };
219                 gpio3: gpio@fd430000 {
220                         #gpio-cells = <2>;
221                         compatible = "arm,pl061", "arm,primecell";
222                         gpio-controller;
223                         reg = <0x0 0xfd430000 0x1000>;
224                         clocks = <&clk_bus>;
225                         clock-names = "apb_pclk";
226                 };
227                 gpio4: gpio@fd440000 {
228                         #gpio-cells = <2>;
229                         compatible = "arm,pl061", "arm,primecell";
230                         gpio-controller;
231                         reg = <0x0 0xfd440000 0x1000>;
232                         clocks = <&clk_bus>;
233                         clock-names = "apb_pclk";
234                         status="disabled";
235                 };
236                 gpio5: gpio@fd450000 {
237                         #gpio-cells = <2>;
238                         compatible = "arm,pl061", "arm,primecell";
239                         gpio-controller;
240                         reg = <0x0 0xfd450000 0x1000>;
241                         clocks = <&clk_bus>;
242                         clock-names = "apb_pclk";
243                         status="disabled";
244                 };
245                 gpio6: gpio@fd460000 {
246                         #gpio-cells = <2>;
247                         compatible = "arm,pl061", "arm,primecell";
248                         gpio-controller;
249                         reg = <0x0 0xfd460000 0x1000>;
250                         clocks = <&clk_bus>;
251                         clock-names = "apb_pclk";
252                         status="disabled";
253                 };
254                 gpio7: gpio@fd470000 {
255                         #gpio-cells = <2>;
256                         compatible = "arm,pl061", "arm,primecell";
257                         gpio-controller;
258                         reg = <0x0 0xfd470000 0x1000>;
259                         clocks = <&clk_bus>;
260                         clock-names = "apb_pclk";
261                         status="disabled";
262                 };
263                 gpio8: gpio@fd480000 {
264                         #gpio-cells = <2>;
265                         compatible = "arm,pl061", "arm,primecell";
266                         gpio-controller;
267                         reg = <0x0 0xfd480000 0x1000>;
268                         clocks = <&clk_bus>;
269                         clock-names = "apb_pclk";
270                         status="disabled";
271                 };
272                 gpio9: gpio@fd490000 {
273                         #gpio-cells = <2>;
274                         compatible = "arm,pl061", "arm,primecell";
275                         gpio-controller;
276                         reg = <0x0 0xfd490000 0x1000>;
277                         clocks = <&clk_bus>;
278                         clock-names = "apb_pclk";
279                         status="disabled";
280                 };
281                 gpio10: gpio@fd4a0000 {
282                         #gpio-cells = <2>;
283                         compatible = "arm,pl061", "arm,primecell";
284                         gpio-controller;
285                         reg = <0x0 0xfd4a0000 0x1000>;
286                         clocks = <&clk_bus>;
287                         clock-names = "apb_pclk";
288                         status="disabled";
289                 };
290                 gpio11: gpio@fd4b0000 {
291                         #gpio-cells = <2>;
292                         compatible = "arm,pl061", "arm,primecell";
293                         gpio-controller;
294                         reg = <0x0 0xfd4b0000 0x1000>;
295                         clocks = <&clk_bus>;
296                         clock-names = "apb_pclk";
297                 };
298                 gpio12: gpio@fd4c0000 {
299                         #gpio-cells = <2>;
300                         compatible = "arm,pl061", "arm,primecell";
301                         gpio-controller;
302                         reg = <0x0 0xfd4c0000 0x1000>;
303                         clocks = <&clk_bus>;
304                         clock-names = "apb_pclk";
305                         status="disabled";
306                 };
307                 gpio13: gpio@fd4d0000 {
308                         #gpio-cells = <2>;
309                         compatible = "arm,pl061", "arm,primecell";
310                         gpio-controller;
311                         reg = <0x0 0xfd4d0000 0x1000>;
312                         clocks = <&clk_bus>;
313                         clock-names = "apb_pclk";
314                         status="disabled";
315                 };
316                 gpio14: gpio@fd4e0000 {
317                         #gpio-cells = <2>;
318                         compatible = "arm,pl061", "arm,primecell";
319                         gpio-controller;
320                         reg = <0x0 0xfd4e0000 0x1000>;
321                         clocks = <&clk_bus>;
322                         clock-names = "apb_pclk";
323                         status="disabled";
324                 };
325                 gpio15: gpio@fd4f0000 {
326                         #gpio-cells = <2>;
327                         compatible = "arm,pl061", "arm,primecell";
328                         gpio-controller;
329                         reg = <0x0 0xfd4f0000 0x1000>;
330                         clocks = <&clk_bus>;
331                         clock-names = "apb_pclk";
332                         status="disabled";
333                 };
334                 gpio16: gpio@fd500000 {
335                         #gpio-cells = <2>;
336                         compatible = "arm,pl061", "arm,primecell";
337                         gpio-controller;
338                         reg = <0x0 0xfd500000 0x1000>;
339                         clocks = <&clk_bus>;
340                         clock-names = "apb_pclk";
341                         status="disabled";
342                 };
343                 gpio17: gpio@fd510000 {
344                         #gpio-cells = <2>;
345                         compatible = "arm,pl061", "arm,primecell";
346                         gpio-controller;
347                         reg = <0x0 0xfd510000 0x1000>;
348                         clocks = <&clk_bus>;
349                         clock-names = "apb_pclk";
350                 };
351         };