1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Eagle board
5 * Copyright (C) 2016-2017 Renesas Electronics Corp.
6 * Copyright (C) 2017 Cogent Embedded, Inc.
10 #include "r8a77970.dtsi"
13 model = "Renesas Eagle board based on r8a77970";
14 compatible = "renesas,eagle", "renesas,r8a77970";
22 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
23 stdout-path = "serial0:115200n8";
27 device_type = "memory";
28 /* first 128MB is reserved for secure area. */
29 reg = <0x0 0x48000000 0x0 0x38000000>;
33 compatible = "hdmi-connector";
37 hdmi_con_out: endpoint {
38 remote-endpoint = <&adv7511_out>;
43 d3p3: regulator-fixed {
44 compatible = "regulator-fixed";
45 regulator-name = "fixed-3.3V";
46 regulator-min-microvolt = <3300000>;
47 regulator-max-microvolt = <3300000>;
53 compatible = "thine,thc63lvd1024";
63 thc63lvd1024_in: endpoint {
64 remote-endpoint = <&lvds0_out>;
70 thc63lvd1024_out: endpoint {
71 remote-endpoint = <&adv7511_in>;
79 pinctrl-0 = <&avb_pins>;
80 pinctrl-names = "default";
82 renesas,no-ether-link;
84 phy-mode = "rgmii-id";
87 phy0: ethernet-phy@0 {
90 interrupt-parent = <&gpio1>;
91 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
96 pinctrl-0 = <&canfd0_pins>;
97 pinctrl-names = "default";
106 clock-frequency = <16666666>;
110 clock-frequency = <32768>;
114 pinctrl-0 = <&i2c0_pins>;
115 pinctrl-names = "default";
118 clock-frequency = <400000>;
120 io_expander: gpio@20 {
121 compatible = "onnn,pca9654";
128 compatible = "adi,adv7511w";
130 interrupt-parent = <&gpio1>;
131 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
133 adi,input-depth = <8>;
134 adi,input-colorspace = "rgb";
135 adi,input-clock = "1x";
136 adi,input-style = <1>;
137 adi,input-justification = "evenly";
140 #address-cells = <1>;
145 adv7511_in: endpoint {
146 remote-endpoint = <&thc63lvd1024_out>;
152 adv7511_out: endpoint {
153 remote-endpoint = <&hdmi_con_out>;
162 groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
166 canfd0_pins: canfd0 {
167 groups = "canfd0_data_a";
177 groups = "scif0_data";
188 pinctrl-0 = <&scif0_pins>;
189 pinctrl-names = "default";
203 lvds0_out: endpoint {
204 remote-endpoint = <&thc63lvd1024_in>;