1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/pwm/pwm.h>
12 stdout-path = "serial2:115200n8";
16 device_type = "memory";
17 reg = <0x0 0x0 0x0 0x40000000>;
20 backlight: backlight {
21 compatible = "pwm-backlight";
25 16 17 18 19 20 21 22 23
26 24 25 26 27 28 29 30 31
27 32 33 34 35 36 37 38 39
28 40 41 42 43 44 45 46 47
29 48 49 50 51 52 53 54 55
30 56 57 58 59 60 61 62 63
31 64 65 66 67 68 69 70 71
32 72 73 74 75 76 77 78 79
33 80 81 82 83 84 85 86 87
34 88 89 90 91 92 93 94 95
35 96 97 98 99 100 101 102 103
36 104 105 106 107 108 109 110 111
37 112 113 114 115 116 117 118 119
38 120 121 122 123 124 125 126 127
39 128 129 130 131 132 133 134 135
40 136 137 138 139 140 141 142 143
41 144 145 146 147 148 149 150 151
42 152 153 154 155 156 157 158 159
43 160 161 162 163 164 165 166 167
44 168 169 170 171 172 173 174 175
45 176 177 178 179 180 181 182 183
46 184 185 186 187 188 189 190 191
47 192 193 194 195 196 197 198 199
48 200 201 202 203 204 205 206 207
49 208 209 210 211 212 213 214 215
50 216 217 218 219 220 221 222 223
51 224 225 226 227 228 229 230 231
52 232 233 234 235 236 237 238 239
53 240 241 242 243 244 245 246 247
54 248 249 250 251 252 253 254 255>;
55 default-brightness-level = <128>;
56 enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
57 pinctrl-names = "default";
59 pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
60 pwm-delay-us = <10000>;
63 emmc_pwrseq: emmc-pwrseq {
64 compatible = "mmc-pwrseq-emmc";
65 pinctrl-0 = <&emmc_reset>;
66 pinctrl-names = "default";
67 reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
71 compatible = "gpio-keys";
72 pinctrl-names = "default";
73 pinctrl-0 = <&pwr_key>;
77 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
79 linux,code = <KEY_POWER>;
83 /* supplies both host and otg */
84 vcc_host: vcc-host-regulator {
85 compatible = "regulator-fixed";
87 gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&host_vbus_drv>;
90 regulator-name = "vcc_host";
93 vin-supply = <&vcc_sys>;
96 vcc_lan: vcc-lan-regulator {
97 compatible = "regulator-fixed";
98 regulator-name = "vcc_lan";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
103 vin-supply = <&vcc_io>;
106 vcc_sys: vcc-sys-regulator {
107 compatible = "regulator-fixed";
108 regulator-name = "vcc_sys";
109 regulator-min-microvolt = <5000000>;
110 regulator-max-microvolt = <5000000>;
119 mmc-pwrseq = <&emmc_pwrseq>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
127 phy-supply = <&vcc_lan>;
129 clock_in_out = "output";
130 snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
131 snps,reset-active-low;
132 snps,reset-delays-us = <0 10000 1000000>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&rmii_pins>;
145 pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
147 drive-strength = <8>;
150 pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
152 drive-strength = <8>;
157 rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
162 emmc_bus8: emmc-bus8 {
163 rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
164 <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
165 <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
166 <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
167 <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
168 <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
169 <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
170 <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
174 rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
178 rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
181 emmc_reset: emmc-reset {
182 rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
188 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
194 rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
199 wifi_reg_on: wifi-reg-on {
200 rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
204 rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
209 host_vbus_drv: host-vbus-drv {
210 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
220 rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
221 rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */