staging: rtl8192u: remove redundant assignment to pointer crypt
[linux/fpc-iii.git] / arch / arm64 / boot / dts / rockchip / rk3399-sapphire.dtsi
blob1bc1579674e5753e81f20ea5d2542da3f6e28b75
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4  */
6 #include "dt-bindings/pwm/pwm.h"
7 #include "dt-bindings/input/input.h"
8 #include "rk3399.dtsi"
9 #include "rk3399-opp.dtsi"
11 / {
12         compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
14         chosen {
15                 stdout-path = "serial2:1500000n8";
16         };
18         clkin_gmac: external-gmac-clock {
19                 compatible = "fixed-clock";
20                 clock-frequency = <125000000>;
21                 clock-output-names = "clkin_gmac";
22                 #clock-cells = <0>;
23         };
25         dc_12v: dc-12v {
26                 compatible = "regulator-fixed";
27                 regulator-name = "dc_12v";
28                 regulator-always-on;
29                 regulator-boot-on;
30                 regulator-min-microvolt = <12000000>;
31                 regulator-max-microvolt = <12000000>;
32         };
34         /*
35          * The fan power supply comes from the baseboard.
36          * For the standalone Sapphire one option is to connect a wire
37          * from  R90030 DNP R0805 pin2  to  C90002 10uF C0805 pin1 (vcc_sys).
38          */
39         fan0: gpio-fan {
40                 #cooling-cells = <2>;
41                 compatible = "gpio-fan";
42                 gpio-fan,speed-map = <0 0 3000 1>;
43                 gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
44                 status = "okay";
45         };
47         keys: gpio-keys {
48                 compatible = "gpio-keys";
49                 autorepeat;
51                 power {
52                         debounce-interval = <100>;
53                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
54                         label = "GPIO Power";
55                         linux,code = <KEY_POWER>;
56                         linux,input-type = <1>;
57                         pinctrl-names = "default";
58                         pinctrl-0 = <&pwr_btn>;
59                         wakeup-source;
60                 };
61         };
63         /* switched by pmic_sleep */
64         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
65                 compatible = "regulator-fixed";
66                 regulator-name = "vcc1v8_s3";
67                 regulator-always-on;
68                 regulator-boot-on;
69                 regulator-min-microvolt = <1800000>;
70                 regulator-max-microvolt = <1800000>;
71                 vin-supply = <&vcc_1v8>;
72         };
74         vcc3v0_sd: vcc3v0-sd {
75                 compatible = "regulator-fixed";
76                 enable-active-high;
77                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
78                 pinctrl-names = "default";
79                 pinctrl-0 = <&sdmmc0_pwr_h>;
80                 regulator-always-on;
81                 regulator-max-microvolt = <3000000>;
82                 regulator-min-microvolt = <3000000>;
83                 regulator-name = "vcc3v0_sd";
84                 vin-supply = <&vcc3v3_sys>;
85         };
87         vcc3v3_sys: vcc3v3-sys {
88                 compatible = "regulator-fixed";
89                 regulator-name = "vcc3v3_sys";
90                 regulator-always-on;
91                 regulator-boot-on;
92                 regulator-min-microvolt = <3300000>;
93                 regulator-max-microvolt = <3300000>;
94                 vin-supply = <&vcc_sys>;
95         };
97         vcc5v0_host: vcc5v0-host-regulator {
98                 compatible = "regulator-fixed";
99                 enable-active-high;
100                 gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
101                 pinctrl-names = "default";
102                 pinctrl-0 = <&vcc5v0_host_en>;
103                 regulator-name = "vcc5v0_host";
104                 regulator-always-on;
105                 vin-supply = <&vcc_sys>;
106         };
108         vcc5v0_typec0: vcc5v0-typec0-regulator {
109                 compatible = "regulator-fixed";
110                 enable-active-high;
111                 gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
112                 pinctrl-names = "default";
113                 pinctrl-0 = <&vcc5v0_typec0_en>;
114                 regulator-name = "vcc5v0_typec0";
115                 vin-supply = <&vcc_sys>;
116         };
118         vcc_sys: vcc-sys {
119                 compatible = "regulator-fixed";
120                 regulator-name = "vcc_sys";
121                 regulator-always-on;
122                 regulator-boot-on;
123                 regulator-min-microvolt = <5000000>;
124                 regulator-max-microvolt = <5000000>;
125                 vin-supply = <&dc_12v>;
126         };
128         vdd_log: vdd-log {
129                 compatible = "pwm-regulator";
130                 pwms = <&pwm2 0 25000 1>;
131                 regulator-name = "vdd_log";
132                 regulator-always-on;
133                 regulator-boot-on;
134                 regulator-min-microvolt = <800000>;
135                 regulator-max-microvolt = <1400000>;
136                 vin-supply = <&vcc_sys>;
137         };
140 &cpu_l0 {
141         cpu-supply = <&vdd_cpu_l>;
144 &cpu_l1 {
145         cpu-supply = <&vdd_cpu_l>;
148 &cpu_l2 {
149         cpu-supply = <&vdd_cpu_l>;
152 &cpu_l3 {
153         cpu-supply = <&vdd_cpu_l>;
156 &cpu_b0 {
157         cpu-supply = <&vdd_cpu_b>;
160 &cpu_b1 {
161         cpu-supply = <&vdd_cpu_b>;
164 &cpu_thermal {
165         trips {
166                 cpu_hot: cpu_hot {
167                         hysteresis = <10000>;
168                         temperature = <55000>;
169                         type = "active";
170                 };
171         };
173         cooling-maps {
174                 map2 {
175                         cooling-device =
176                                 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
177                         trip = <&cpu_hot>;
178                 };
179         };
182 &emmc_phy {
183         status = "okay";
186 &gmac {
187         assigned-clocks = <&cru SCLK_RMII_SRC>;
188         assigned-clock-parents = <&clkin_gmac>;
189         clock_in_out = "input";
190         phy-supply = <&vcc_lan>;
191         phy-mode = "rgmii";
192         pinctrl-names = "default";
193         pinctrl-0 = <&rgmii_pins>;
194         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
195         snps,reset-active-low;
196         snps,reset-delays-us = <0 10000 50000>;
197         tx_delay = <0x28>;
198         rx_delay = <0x11>;
199         status = "okay";
202 &gpu {
203         mali-supply = <&vdd_gpu>;
204         status = "okay";
207 &hdmi {
208         ddc-i2c-bus = <&i2c3>;
209         status = "okay";
212 &hdmi_sound {
213         status = "okay";
216 &i2c0 {
217         clock-frequency = <400000>;
218         i2c-scl-rising-time-ns = <168>;
219         i2c-scl-falling-time-ns = <4>;
220         status = "okay";
222         rk808: pmic@1b {
223                 compatible = "rockchip,rk808";
224                 reg = <0x1b>;
225                 interrupt-parent = <&gpio1>;
226                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
227                 #clock-cells = <1>;
228                 clock-output-names = "xin32k", "rk808-clkout2";
229                 pinctrl-names = "default";
230                 pinctrl-0 = <&pmic_int_l>;
231                 rockchip,system-power-controller;
232                 wakeup-source;
234                 vcc1-supply = <&vcc_sys>;
235                 vcc2-supply = <&vcc_sys>;
236                 vcc3-supply = <&vcc_sys>;
237                 vcc4-supply = <&vcc_sys>;
238                 vcc6-supply = <&vcc_sys>;
239                 vcc7-supply = <&vcc_sys>;
240                 vcc8-supply = <&vcc3v3_sys>;
241                 vcc9-supply = <&vcc_sys>;
242                 vcc10-supply = <&vcc_sys>;
243                 vcc11-supply = <&vcc_sys>;
244                 vcc12-supply = <&vcc3v3_sys>;
245                 vddio-supply = <&vcc1v8_pmu>;
247                 regulators {
248                         vdd_center: DCDC_REG1 {
249                                 regulator-name = "vdd_center";
250                                 regulator-always-on;
251                                 regulator-boot-on;
252                                 regulator-min-microvolt = <750000>;
253                                 regulator-max-microvolt = <1350000>;
254                                 regulator-ramp-delay = <6001>;
255                                 regulator-state-mem {
256                                         regulator-off-in-suspend;
257                                 };
258                         };
260                         vdd_cpu_l: DCDC_REG2 {
261                                 regulator-name = "vdd_cpu_l";
262                                 regulator-always-on;
263                                 regulator-boot-on;
264                                 regulator-min-microvolt = <750000>;
265                                 regulator-max-microvolt = <1350000>;
266                                 regulator-ramp-delay = <6001>;
267                                 regulator-state-mem {
268                                         regulator-off-in-suspend;
269                                 };
270                         };
272                         vcc_ddr: DCDC_REG3 {
273                                 regulator-name = "vcc_ddr";
274                                 regulator-always-on;
275                                 regulator-boot-on;
276                                 regulator-state-mem {
277                                         regulator-on-in-suspend;
278                                 };
279                         };
281                         vcc_1v8: DCDC_REG4 {
282                                 regulator-name = "vcc_1v8";
283                                 regulator-always-on;
284                                 regulator-boot-on;
285                                 regulator-min-microvolt = <1800000>;
286                                 regulator-max-microvolt = <1800000>;
287                                 regulator-state-mem {
288                                         regulator-on-in-suspend;
289                                         regulator-suspend-microvolt = <1800000>;
290                                 };
291                         };
293                         vcc1v8_dvp: LDO_REG1 {
294                                 regulator-name = "vcc1v8_dvp";
295                                 regulator-always-on;
296                                 regulator-boot-on;
297                                 regulator-min-microvolt = <1800000>;
298                                 regulator-max-microvolt = <1800000>;
299                                 regulator-state-mem {
300                                         regulator-off-in-suspend;
301                                 };
302                         };
304                         vcc3v0_tp: LDO_REG2 {
305                                 regulator-name = "vcc3v0_tp";
306                                 regulator-always-on;
307                                 regulator-boot-on;
308                                 regulator-min-microvolt = <3000000>;
309                                 regulator-max-microvolt = <3000000>;
310                                 regulator-state-mem {
311                                         regulator-off-in-suspend;
312                                 };
313                         };
315                         vcc1v8_pmu: LDO_REG3 {
316                                 regulator-name = "vcc1v8_pmu";
317                                 regulator-always-on;
318                                 regulator-boot-on;
319                                 regulator-min-microvolt = <1800000>;
320                                 regulator-max-microvolt = <1800000>;
321                                 regulator-state-mem {
322                                         regulator-on-in-suspend;
323                                         regulator-suspend-microvolt = <1800000>;
324                                 };
325                         };
327                         vcc_sdio: LDO_REG4 {
328                                 regulator-name = "vcc_sdio";
329                                 regulator-always-on;
330                                 regulator-boot-on;
331                                 regulator-min-microvolt = <1800000>;
332                                 regulator-max-microvolt = <3300000>;
333                                 regulator-state-mem {
334                                         regulator-on-in-suspend;
335                                         regulator-suspend-microvolt = <3000000>;
336                                 };
337                         };
339                         vcca3v0_codec: LDO_REG5 {
340                                 regulator-name = "vcca3v0_codec";
341                                 regulator-always-on;
342                                 regulator-boot-on;
343                                 regulator-min-microvolt = <3000000>;
344                                 regulator-max-microvolt = <3000000>;
345                                 regulator-state-mem {
346                                         regulator-off-in-suspend;
347                                 };
348                         };
350                         vcc_1v5: LDO_REG6 {
351                                 regulator-name = "vcc_1v5";
352                                 regulator-always-on;
353                                 regulator-boot-on;
354                                 regulator-min-microvolt = <1500000>;
355                                 regulator-max-microvolt = <1500000>;
356                                 regulator-state-mem {
357                                         regulator-on-in-suspend;
358                                         regulator-suspend-microvolt = <1500000>;
359                                 };
360                         };
362                         vcca1v8_codec: LDO_REG7 {
363                                 regulator-name = "vcca1v8_codec";
364                                 regulator-always-on;
365                                 regulator-boot-on;
366                                 regulator-min-microvolt = <1800000>;
367                                 regulator-max-microvolt = <1800000>;
368                                 regulator-state-mem {
369                                         regulator-off-in-suspend;
370                                 };
371                         };
373                         vcc_3v0: LDO_REG8 {
374                                 regulator-name = "vcc_3v0";
375                                 regulator-always-on;
376                                 regulator-boot-on;
377                                 regulator-min-microvolt = <3000000>;
378                                 regulator-max-microvolt = <3000000>;
379                                 regulator-state-mem {
380                                         regulator-on-in-suspend;
381                                         regulator-suspend-microvolt = <3000000>;
382                                 };
383                         };
385                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
386                                 regulator-name = "vcc3v3_s3";
387                                 regulator-always-on;
388                                 regulator-boot-on;
389                                 regulator-state-mem {
390                                         regulator-off-in-suspend;
391                                 };
392                         };
394                         vcc3v3_s0: SWITCH_REG2 {
395                                 regulator-name = "vcc3v3_s0";
396                                 regulator-always-on;
397                                 regulator-boot-on;
398                                 regulator-state-mem {
399                                         regulator-off-in-suspend;
400                                 };
401                         };
402                 };
403         };
405         vdd_cpu_b: regulator@40 {
406                 compatible = "silergy,syr827";
407                 reg = <0x40>;
408                 fcs,suspend-voltage-selector = <1>;
409                 regulator-name = "vdd_cpu_b";
410                 regulator-min-microvolt = <712500>;
411                 regulator-max-microvolt = <1500000>;
412                 regulator-ramp-delay = <1000>;
413                 regulator-always-on;
414                 regulator-boot-on;
415                 vin-supply = <&vcc_sys>;
417                 regulator-state-mem {
418                         regulator-off-in-suspend;
419                 };
420         };
422         vdd_gpu: regulator@41 {
423                 compatible = "silergy,syr828";
424                 reg = <0x41>;
425                 fcs,suspend-voltage-selector = <1>;
426                 regulator-name = "vdd_gpu";
427                 regulator-min-microvolt = <712500>;
428                 regulator-max-microvolt = <1500000>;
429                 regulator-ramp-delay = <1000>;
430                 regulator-always-on;
431                 regulator-boot-on;
432                 vin-supply = <&vcc_sys>;
434                 regulator-state-mem {
435                         regulator-off-in-suspend;
436                 };
437         };
440 &i2c3 {
441         i2c-scl-rising-time-ns = <450>;
442         i2c-scl-falling-time-ns = <15>;
443         status = "okay";
446 &i2s2 {
447         status = "okay";
450 &io_domains {
451         status = "okay";
453         bt656-supply = <&vcc_3v0>;
454         audio-supply = <&vcca1v8_codec>;
455         sdmmc-supply = <&vcc_sdio>;
456         gpio1830-supply = <&vcc_3v0>;
459 &pmu_io_domains {
460         pmu1830-supply = <&vcc_3v0>;
461         status = "okay";
464 &pinctrl {
465         buttons {
466                 pwr_btn: pwr-btn {
467                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
468                 };
469         };
471         fan {
472                 motor_pwr: motor-pwr {
473                         rockchip,pins =
474                                 <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
475                 };
476         };
478         pmic {
479                 pmic_int_l: pmic-int-l {
480                         rockchip,pins =
481                                 <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
482                 };
484                 vsel1_gpio: vsel1-gpio {
485                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
486                 };
488                 vsel2_gpio: vsel2-gpio {
489                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
490                 };
491         };
493         sd {
494                 sdmmc0_pwr_h: sdmmc0-pwr-h {
495                         rockchip,pins =
496                                 <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
497                 };
498         };
500         usb2 {
501                 vcc5v0_host_en: vcc5v0-host-en {
502                         rockchip,pins =
503                                 <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
504                 };
505                 vcc5v0_typec0_en: vcc5v0-typec0-en {
506                         rockchip,pins =
507                                 <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
508                 };
509         };
512 &pwm0 {
513         status = "okay";
516 &pwm2 {
517         status = "okay";
520 &saradc {
521         vref-supply = <&vcca1v8_s3>;
522         status = "okay";
525 &sdhci {
526         bus-width = <8>;
527         mmc-hs400-1_8v;
528         mmc-hs400-enhanced-strobe;
529         non-removable;
530         status = "okay";
533 &sdmmc {
534         broken-cd;
535         bus-width = <4>;
536         cap-mmc-highspeed;
537         cap-sd-highspeed;
538         clock-frequency = <150000000>;
539         disable-wp;
540         max-frequency = <150000000>;
541         pinctrl-names = "default";
542         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
543         vmmc-supply = <&vcc3v0_sd>;
544         vqmmc-supply = <&vcc_sdio>;
545         status = "okay";
548 &tcphy0 {
549         status = "okay";
552 &tcphy1 {
553         status = "okay";
556 &tsadc {
557         /* tshut mode 0:CRU 1:GPIO */
558         rockchip,hw-tshut-mode = <1>;
559         /* tshut polarity 0:LOW 1:HIGH */
560         rockchip,hw-tshut-polarity = <1>;
561         status = "okay";
564 &u2phy0 {
565         status = "okay";
567         u2phy0_otg: otg-port {
568                 status = "okay";
569         };
571         u2phy0_host: host-port {
572                 phy-supply = <&vcc5v0_typec0>;
573                 status = "okay";
574         };
577 &u2phy1 {
578         status = "okay";
580         u2phy1_otg: otg-port {
581                 status = "okay";
582         };
584         u2phy1_host: host-port {
585                 phy-supply = <&vcc5v0_host>;
586                 status = "okay";
587         };
590 &uart0 {
591         pinctrl-names = "default";
592         pinctrl-0 = <&uart0_xfer &uart0_cts>;
593         status = "okay";
596 &uart2 {
597         status = "okay";
600 &usb_host0_ehci {
601         status = "okay";
604 &usb_host0_ohci {
605         status = "okay";
608 &usb_host1_ehci {
609         status = "okay";
612 &usb_host1_ohci {
613         status = "okay";
616 &usbdrd3_0 {
617         status = "okay";
620 &usbdrd_dwc3_0 {
621         status = "okay";
622         dr_mode = "host";
625 &usbdrd3_1 {
626         status = "okay";
629 &usbdrd_dwc3_1 {
630         status = "okay";
631         dr_mode = "host";
634 &vopb {
635         status = "okay";
638 &vopb_mmu {
639         status = "okay";
642 &vopl {
643         status = "okay";
646 &vopl_mmu {
647         status = "okay";