drivers/tty/serial/jsm/jsm.h

   1 /************************************************************************
   2  * Copyright 2003 Digi International (www.digi.com)
   3  *
   4  * Copyright (C) 2004 IBM Corporation. All rights reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
  13  * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
  14  * PURPOSE.  See the GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
  19  * MA  02111-1307, USA.
  20  *
  21  * Contact Information:
  22  * Scott H Kilau <Scott_Kilau@digi.com>
  23  * Wendy Xiong   <wendyx@us.ibm.com>
  24  *
  25  ***********************************************************************/
  26
  27 #ifndef __JSM_DRIVER_H
  28 #define __JSM_DRIVER_H
  29
  30 #include <linux/kernel.h>
  31 #include <linux/types.h>        /* To pick up the varions Linux types */
  32 #include <linux/tty.h>
  33 #include <linux/serial_core.h>
  34 #include <linux/device.h>
  35
  36 /*
  37  * Debugging levels can be set using debug insmod variable
  38  * They can also be compiled out completely.
  39  */
  40 enum {
  41         DBG_INIT        = 0x01,
  42         DBG_BASIC       = 0x02,
  43         DBG_CORE        = 0x04,
  44         DBG_OPEN        = 0x08,
  45         DBG_CLOSE       = 0x10,
  46         DBG_READ        = 0x20,
  47         DBG_WRITE       = 0x40,
  48         DBG_IOCTL       = 0x80,
  49         DBG_PROC        = 0x100,
  50         DBG_PARAM       = 0x200,
  51         DBG_PSCAN       = 0x400,
  52         DBG_EVENT       = 0x800,
  53         DBG_DRAIN       = 0x1000,
  54         DBG_MSIGS       = 0x2000,
  55         DBG_MGMT        = 0x4000,
  56         DBG_INTR        = 0x8000,
  57         DBG_CARR        = 0x10000,
  58 };
  59
  60 #define jsm_printk(nlevel, klevel, pdev, fmt, args...)  \
  61         if ((DBG_##nlevel & jsm_debug))                 \
  62         dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
  63
  64 #define MAXLINES        256
  65 #define MAXPORTS        8
  66 #define MAX_STOPS_SENT  5
  67
  68 /* Board type definitions */
  69
  70 #define T_NEO           0000
  71 #define T_CLASSIC       0001
  72 #define T_PCIBUS        0400
  73
  74 /* Board State Definitions */
  75
  76 #define BD_RUNNING      0x0
  77 #define BD_REASON       0x7f
  78 #define BD_NOTFOUND     0x1
  79 #define BD_NOIOPORT     0x2
  80 #define BD_NOMEM        0x3
  81 #define BD_NOBIOS       0x4
  82 #define BD_NOFEP        0x5
  83 #define BD_FAILED       0x6
  84 #define BD_ALLOCATED    0x7
  85 #define BD_TRIBOOT      0x8
  86 #define BD_BADKME       0x80
  87
  88
  89 /* 4 extra for alignment play space */
  90 #define WRITEBUFLEN     ((4096) + 4)
  91 #define MYFLIPLEN       N_TTY_BUF_SIZE
  92
  93 #define JSM_VERSION     "jsm: 1.2-1-INKERNEL"
  94 #define JSM_PARTNUM     "40002438_A-INKERNEL"
  95
  96 struct jsm_board;
  97 struct jsm_channel;
  98
  99 /************************************************************************
 100  * Per board operations structure                                       *
 101  ************************************************************************/
 102 struct board_ops {
 103         irq_handler_t intr;
 104         void (*uart_init) (struct jsm_channel *ch);
 105         void (*uart_off) (struct jsm_channel *ch);
 106         void (*param) (struct jsm_channel *ch);
 107         void (*assert_modem_signals) (struct jsm_channel *ch);
 108         void (*flush_uart_write) (struct jsm_channel *ch);
 109         void (*flush_uart_read) (struct jsm_channel *ch);
 110         void (*disable_receiver) (struct jsm_channel *ch);
 111         void (*enable_receiver) (struct jsm_channel *ch);
 112         void (*send_break) (struct jsm_channel *ch);
 113         void (*clear_break) (struct jsm_channel *ch, int);
 114         void (*send_start_character) (struct jsm_channel *ch);
 115         void (*send_stop_character) (struct jsm_channel *ch);
 116         void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch);
 117         u32 (*get_uart_bytes_left) (struct jsm_channel *ch);
 118         void (*send_immediate_char) (struct jsm_channel *ch, unsigned char);
 119 };
 120
 121
 122 /*
 123  *      Per-board information
 124  */
 125 struct jsm_board
 126 {
 127         int             boardnum;       /* Board number: 0-32 */
 128
 129         int             type;           /* Type of board */
 130         u8              rev;            /* PCI revision ID */
 131         struct pci_dev  *pci_dev;
 132         u32             maxports;       /* MAX ports this board can handle */
 133
 134         spinlock_t      bd_intr_lock;   /* Used to protect the poller tasklet and
 135                                          * the interrupt routine from each other.
 136                                          */
 137
 138         u32             nasync;         /* Number of ports on card */
 139
 140         u32             irq;            /* Interrupt request number */
 141
 142         u64             membase;        /* Start of base memory of the card */
 143         u64             membase_end;    /* End of base memory of the card */
 144
 145         u8      __iomem *re_map_membase;/* Remapped memory of the card */
 146
 147         u64             iobase;         /* Start of io base of the card */
 148         u64             iobase_end;     /* End of io base of the card */
 149
 150         u32             bd_uart_offset; /* Space between each UART */
 151
 152         struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */
 153         char            *flipbuf;       /* Our flip buffer, alloced if board is found */
 154
 155         u32             bd_dividend;    /* Board/UARTs specific dividend */
 156
 157         struct board_ops *bd_ops;
 158
 159         struct list_head jsm_board_entry;
 160 };
 161
 162 /************************************************************************
 163  * Device flag definitions for ch_flags.
 164  ************************************************************************/
 165 #define CH_PRON         0x0001          /* Printer on string            */
 166 #define CH_STOP         0x0002          /* Output is stopped            */
 167 #define CH_STOPI        0x0004          /* Input is stopped             */
 168 #define CH_CD           0x0008          /* Carrier is present           */
 169 #define CH_FCAR         0x0010          /* Carrier forced on            */
 170 #define CH_HANGUP       0x0020          /* Hangup received              */
 171
 172 #define CH_RECEIVER_OFF 0x0040          /* Receiver is off              */
 173 #define CH_OPENING      0x0080          /* Port in fragile open state   */
 174 #define CH_CLOSING      0x0100          /* Port in fragile close state  */
 175 #define CH_FIFO_ENABLED 0x0200          /* Port has FIFOs enabled       */
 176 #define CH_TX_FIFO_EMPTY 0x0400         /* TX Fifo is completely empty  */
 177 #define CH_TX_FIFO_LWM  0x0800          /* TX Fifo is below Low Water   */
 178 #define CH_BREAK_SENDING 0x1000         /* Break is being sent          */
 179 #define CH_LOOPBACK 0x2000              /* Channel is in lookback mode  */
 180 #define CH_FLIPBUF_IN_USE 0x4000        /* Channel's flipbuf is in use  */
 181 #define CH_BAUD0        0x08000         /* Used for checking B0 transitions */
 182
 183 /* Our Read/Error/Write queue sizes */
 184 #define RQUEUEMASK      0x1FFF          /* 8 K - 1 */
 185 #define EQUEUEMASK      0x1FFF          /* 8 K - 1 */
 186 #define WQUEUEMASK      0x0FFF          /* 4 K - 1 */
 187 #define RQUEUESIZE      (RQUEUEMASK + 1)
 188 #define EQUEUESIZE      RQUEUESIZE
 189 #define WQUEUESIZE      (WQUEUEMASK + 1)
 190
 191
 192 /************************************************************************
 193  * Channel information structure.
 194  ************************************************************************/
 195 struct jsm_channel {
 196         struct uart_port uart_port;
 197         struct jsm_board        *ch_bd;         /* Board structure pointer      */
 198
 199         spinlock_t      ch_lock;        /* provide for serialization */
 200         wait_queue_head_t ch_flags_wait;
 201
 202         u32             ch_portnum;     /* Port number, 0 offset.       */
 203         u32             ch_open_count;  /* open count                   */
 204         u32             ch_flags;       /* Channel flags                */
 205
 206         u64             ch_close_delay; /* How long we should drop RTS/DTR for */
 207
 208         tcflag_t        ch_c_iflag;     /* channel iflags               */
 209         tcflag_t        ch_c_cflag;     /* channel cflags               */
 210         tcflag_t        ch_c_oflag;     /* channel oflags               */
 211         tcflag_t        ch_c_lflag;     /* channel lflags               */
 212         u8              ch_stopc;       /* Stop character               */
 213         u8              ch_startc;      /* Start character              */
 214
 215         u8              ch_mostat;      /* FEP output modem status      */
 216         u8              ch_mistat;      /* FEP input modem status       */
 217
 218         struct neo_uart_struct __iomem *ch_neo_uart;    /* Pointer to the "mapped" UART struct */
 219         u8              ch_cached_lsr;  /* Cached value of the LSR register */
 220
 221         u8              *ch_rqueue;     /* Our read queue buffer - malloc'ed */
 222         u16             ch_r_head;      /* Head location of the read queue */
 223         u16             ch_r_tail;      /* Tail location of the read queue */
 224
 225         u8              *ch_equeue;     /* Our error queue buffer - malloc'ed */
 226         u16             ch_e_head;      /* Head location of the error queue */
 227         u16             ch_e_tail;      /* Tail location of the error queue */
 228
 229         u8              *ch_wqueue;     /* Our write queue buffer - malloc'ed */
 230         u16             ch_w_head;      /* Head location of the write queue */
 231         u16             ch_w_tail;      /* Tail location of the write queue */
 232
 233         u64             ch_rxcount;     /* total of data received so far */
 234         u64             ch_txcount;     /* total of data transmitted so far */
 235
 236         u8              ch_r_tlevel;    /* Receive Trigger level */
 237         u8              ch_t_tlevel;    /* Transmit Trigger level */
 238
 239         u8              ch_r_watermark; /* Receive Watermark */
 240
 241
 242         u32             ch_stops_sent;  /* How many times I have sent a stop character
 243                                          * to try to stop the other guy sending.
 244                                          */
 245         u64             ch_err_parity;  /* Count of parity errors on channel */
 246         u64             ch_err_frame;   /* Count of framing errors on channel */
 247         u64             ch_err_break;   /* Count of breaks on channel */
 248         u64             ch_err_overrun; /* Count of overruns on channel */
 249
 250         u64             ch_xon_sends;   /* Count of xons transmitted */
 251         u64             ch_xoff_sends;  /* Count of xoffs transmitted */
 252 };
 253
 254
 255 /************************************************************************
 256  * Per channel/port NEO UART structure                                  *
 257  ************************************************************************
 258  *              Base Structure Entries Usage Meanings to Host           *
 259  *                                                                      *
 260  *      W = read write          R = read only                           *
 261  *                      U = Unused.                                     *
 262  ************************************************************************/
 263
 264 struct neo_uart_struct {
 265          u8 txrx;               /* WR   RHR/THR - Holding Reg */
 266          u8 ier;                /* WR   IER - Interrupt Enable Reg */
 267          u8 isr_fcr;            /* WR   ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
 268          u8 lcr;                /* WR   LCR - Line Control Reg */
 269          u8 mcr;                /* WR   MCR - Modem Control Reg */
 270          u8 lsr;                /* WR   LSR - Line Status Reg */
 271          u8 msr;                /* WR   MSR - Modem Status Reg */
 272          u8 spr;                /* WR   SPR - Scratch Pad Reg */
 273          u8 fctr;               /* WR   FCTR - Feature Control Reg */
 274          u8 efr;                /* WR   EFR - Enhanced Function Reg */
 275          u8 tfifo;              /* WR   TXCNT/TXTRG - Transmit FIFO Reg */
 276          u8 rfifo;              /* WR   RXCNT/RXTRG - Recieve FIFO Reg */
 277          u8 xoffchar1;  /* WR   XOFF 1 - XOff Character 1 Reg */
 278          u8 xoffchar2;  /* WR   XOFF 2 - XOff Character 2 Reg */
 279          u8 xonchar1;   /* WR   XON 1 - Xon Character 1 Reg */
 280          u8 xonchar2;   /* WR   XON 2 - XOn Character 2 Reg */
 281
 282          u8 reserved1[0x2ff - 0x200]; /* U      Reserved by Exar */
 283          u8 txrxburst[64];      /* RW   64 bytes of RX/TX FIFO Data */
 284          u8 reserved2[0x37f - 0x340]; /* U      Reserved by Exar */
 285          u8 rxburst_with_errors[64];    /* R    64 bytes of RX FIFO Data + LSR */
 286 };
 287
 288 /* Where to read the extended interrupt register (32bits instead of 8bits) */
 289 #define UART_17158_POLL_ADDR_OFFSET     0x80
 290
 291 /*
 292  * These are the redefinitions for the FCTR on the XR17C158, since
 293  * Exar made them different than their earlier design. (XR16C854)
 294  */
 295
 296 /* These are only applicable when table D is selected */
 297 #define UART_17158_FCTR_RTS_NODELAY     0x00
 298 #define UART_17158_FCTR_RTS_4DELAY      0x01
 299 #define UART_17158_FCTR_RTS_6DELAY      0x02
 300 #define UART_17158_FCTR_RTS_8DELAY      0x03
 301 #define UART_17158_FCTR_RTS_12DELAY     0x12
 302 #define UART_17158_FCTR_RTS_16DELAY     0x05
 303 #define UART_17158_FCTR_RTS_20DELAY     0x13
 304 #define UART_17158_FCTR_RTS_24DELAY     0x06
 305 #define UART_17158_FCTR_RTS_28DELAY     0x14
 306 #define UART_17158_FCTR_RTS_32DELAY     0x07
 307 #define UART_17158_FCTR_RTS_36DELAY     0x16
 308 #define UART_17158_FCTR_RTS_40DELAY     0x08
 309 #define UART_17158_FCTR_RTS_44DELAY     0x09
 310 #define UART_17158_FCTR_RTS_48DELAY     0x10
 311 #define UART_17158_FCTR_RTS_52DELAY     0x11
 312
 313 #define UART_17158_FCTR_RTS_IRDA        0x10
 314 #define UART_17158_FCTR_RS485           0x20
 315 #define UART_17158_FCTR_TRGA            0x00
 316 #define UART_17158_FCTR_TRGB            0x40
 317 #define UART_17158_FCTR_TRGC            0x80
 318 #define UART_17158_FCTR_TRGD            0xC0
 319
 320 /* 17158 trigger table selects.. */
 321 #define UART_17158_FCTR_BIT6            0x40
 322 #define UART_17158_FCTR_BIT7            0x80
 323
 324 /* 17158 TX/RX memmapped buffer offsets */
 325 #define UART_17158_RX_FIFOSIZE          64
 326 #define UART_17158_TX_FIFOSIZE          64
 327
 328 /* 17158 Extended IIR's */
 329 #define UART_17158_IIR_RDI_TIMEOUT      0x0C    /* Receiver data TIMEOUT */
 330 #define UART_17158_IIR_XONXOFF          0x10    /* Received an XON/XOFF char */
 331 #define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
 332 #define UART_17158_IIR_FIFO_ENABLED     0xC0    /* 16550 FIFOs are Enabled */
 333
 334 /*
 335  * These are the extended interrupts that get sent
 336  * back to us from the UART's 32bit interrupt register
 337  */
 338 #define UART_17158_RX_LINE_STATUS       0x1     /* RX Ready */
 339 #define UART_17158_RXRDY_TIMEOUT        0x2     /* RX Ready Timeout */
 340 #define UART_17158_TXRDY                0x3     /* TX Ready */
 341 #define UART_17158_MSR                  0x4     /* Modem State Change */
 342 #define UART_17158_TX_AND_FIFO_CLR      0x40    /* Transmitter Holding Reg Empty */
 343 #define UART_17158_RX_FIFO_DATA_ERROR   0x80    /* UART detected an RX FIFO Data error */
 344
 345 /*
 346  * These are the EXTENDED definitions for the 17C158's Interrupt
 347  * Enable Register.
 348  */
 349 #define UART_17158_EFR_ECB      0x10    /* Enhanced control bit */
 350 #define UART_17158_EFR_IXON     0x2     /* Receiver compares Xon1/Xoff1 */
 351 #define UART_17158_EFR_IXOFF    0x8     /* Transmit Xon1/Xoff1 */
 352 #define UART_17158_EFR_RTSDTR   0x40    /* Auto RTS/DTR Flow Control Enable */
 353 #define UART_17158_EFR_CTSDSR   0x80    /* Auto CTS/DSR Flow COntrol Enable */
 354
 355 #define UART_17158_XOFF_DETECT  0x1     /* Indicates whether chip saw an incoming XOFF char */
 356 #define UART_17158_XON_DETECT   0x2     /* Indicates whether chip saw an incoming XON char */
 357
 358 #define UART_17158_IER_RSVD1    0x10    /* Reserved by Exar */
 359 #define UART_17158_IER_XOFF     0x20    /* Xoff Interrupt Enable */
 360 #define UART_17158_IER_RTSDTR   0x40    /* Output Interrupt Enable */
 361 #define UART_17158_IER_CTSDSR   0x80    /* Input Interrupt Enable */
 362
 363 #define PCI_DEVICE_NEO_2DB9_PCI_NAME            "Neo 2 - DB9 Universal PCI"
 364 #define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME         "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
 365 #define PCI_DEVICE_NEO_2RJ45_PCI_NAME           "Neo 2 - RJ45 Universal PCI"
 366 #define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME        "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
 367 #define PCIE_DEVICE_NEO_IBM_PCI_NAME            "Neo 4 - PCI Express - IBM"
 368
 369 /*
 370  * Our Global Variables.
 371  */
 372 extern struct   uart_driver jsm_uart_driver;
 373 extern struct   board_ops jsm_neo_ops;
 374 extern int      jsm_debug;
 375
 376 /*************************************************************************
 377  *
 378  * Prototypes for non-static functions used in more than one module
 379  *
 380  *************************************************************************/
 381 int jsm_tty_write(struct uart_port *port);
 382 int jsm_tty_init(struct jsm_board *);
 383 int jsm_uart_port_init(struct jsm_board *);
 384 int jsm_remove_uart_port(struct jsm_board *);
 385 void jsm_input(struct jsm_channel *ch);
 386 void jsm_check_queue_flow_control(struct jsm_channel *ch);
 387
 388 #endif