drivers/scsi/sym53c8xx_2/sym_hipd.h

   1 /*
   2  * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
   3  * of PCI-SCSI IO processors.
   4  *
   5  * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
   6  *
   7  * This driver is derived from the Linux sym53c8xx driver.
   8  * Copyright (C) 1998-2000  Gerard Roudier
   9  *
  10  * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
  11  * a port of the FreeBSD ncr driver to Linux-1.2.13.
  12  *
  13  * The original ncr driver has been written for 386bsd and FreeBSD by
  14  *         Wolfgang Stanglmeier        <wolf@cologne.de>
  15  *         Stefan Esser                <se@mi.Uni-Koeln.de>
  16  * Copyright (C) 1994  Wolfgang Stanglmeier
  17  *
  18  * Other major contributions:
  19  *
  20  * NVRAM detection and reading.
  21  * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
  22  *
  23  *-----------------------------------------------------------------------------
  24  *
  25  * This program is free software; you can redistribute it and/or modify
  26  * it under the terms of the GNU General Public License as published by
  27  * the Free Software Foundation; either version 2 of the License, or
  28  * (at your option) any later version.
  29  *
  30  * This program is distributed in the hope that it will be useful,
  31  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  32  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  33  * GNU General Public License for more details.
  34  *
  35  * You should have received a copy of the GNU General Public License
  36  * along with this program; if not, write to the Free Software
  37  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  38  */
  39
  40 #include <linux/gfp.h>
  41
  42 #ifndef SYM_HIPD_H
  43 #define SYM_HIPD_H
  44
  45 /*
  46  *  Generic driver options.
  47  *
  48  *  They may be defined in platform specific headers, if they
  49  *  are useful.
  50  *
  51  *    SYM_OPT_HANDLE_DEVICE_QUEUEING
  52  *        When this option is set, the driver will use a queue per
  53  *        device and handle QUEUE FULL status requeuing internally.
  54  *
  55  *    SYM_OPT_LIMIT_COMMAND_REORDERING
  56  *        When this option is set, the driver tries to limit tagged
  57  *        command reordering to some reasonable value.
  58  *        (set for Linux)
  59  */
  60 #if 0
  61 #define SYM_OPT_HANDLE_DEVICE_QUEUEING
  62 #define SYM_OPT_LIMIT_COMMAND_REORDERING
  63 #endif
  64
  65 /*
  66  *  Active debugging tags and verbosity.
  67  *  Both DEBUG_FLAGS and sym_verbose can be redefined
  68  *  by the platform specific code to something else.
  69  */
  70 #define DEBUG_ALLOC     (0x0001)
  71 #define DEBUG_PHASE     (0x0002)
  72 #define DEBUG_POLL      (0x0004)
  73 #define DEBUG_QUEUE     (0x0008)
  74 #define DEBUG_RESULT    (0x0010)
  75 #define DEBUG_SCATTER   (0x0020)
  76 #define DEBUG_SCRIPT    (0x0040)
  77 #define DEBUG_TINY      (0x0080)
  78 #define DEBUG_TIMING    (0x0100)
  79 #define DEBUG_NEGO      (0x0200)
  80 #define DEBUG_TAGS      (0x0400)
  81 #define DEBUG_POINTER   (0x0800)
  82
  83 #ifndef DEBUG_FLAGS
  84 #define DEBUG_FLAGS     (0x0000)
  85 #endif
  86
  87 #ifndef sym_verbose
  88 #define sym_verbose     (np->verbose)
  89 #endif
  90
  91 /*
  92  *  These ones should have been already defined.
  93  */
  94 #ifndef assert
  95 #define assert(expression) { \
  96         if (!(expression)) { \
  97                 (void)panic( \
  98                         "assertion \"%s\" failed: file \"%s\", line %d\n", \
  99                         #expression, \
 100                         __FILE__, __LINE__); \
 101         } \
 102 }
 103 #endif
 104
 105 /*
 106  *  Number of tasks per device we want to handle.
 107  */
 108 #if     SYM_CONF_MAX_TAG_ORDER > 8
 109 #error  "more than 256 tags per logical unit not allowed."
 110 #endif
 111 #define SYM_CONF_MAX_TASK       (1<<SYM_CONF_MAX_TAG_ORDER)
 112
 113 /*
 114  *  Donnot use more tasks that we can handle.
 115  */
 116 #ifndef SYM_CONF_MAX_TAG
 117 #define SYM_CONF_MAX_TAG        SYM_CONF_MAX_TASK
 118 #endif
 119 #if     SYM_CONF_MAX_TAG > SYM_CONF_MAX_TASK
 120 #undef  SYM_CONF_MAX_TAG
 121 #define SYM_CONF_MAX_TAG        SYM_CONF_MAX_TASK
 122 #endif
 123
 124 /*
 125  *    This one means 'NO TAG for this job'
 126  */
 127 #define NO_TAG  (256)
 128
 129 /*
 130  *  Number of SCSI targets.
 131  */
 132 #if     SYM_CONF_MAX_TARGET > 16
 133 #error  "more than 16 targets not allowed."
 134 #endif
 135
 136 /*
 137  *  Number of logical units per target.
 138  */
 139 #if     SYM_CONF_MAX_LUN > 64
 140 #error  "more than 64 logical units per target not allowed."
 141 #endif
 142
 143 /*
 144  *    Asynchronous pre-scaler (ns). Shall be 40 for
 145  *    the SCSI timings to be compliant.
 146  */
 147 #define SYM_CONF_MIN_ASYNC (40)
 148
 149
 150 /*
 151  * MEMORY ALLOCATOR.
 152  */
 153
 154 #define SYM_MEM_WARN    1       /* Warn on failed operations */
 155
 156 #define SYM_MEM_PAGE_ORDER 0    /* 1 PAGE  maximum */
 157 #define SYM_MEM_CLUSTER_SHIFT   (PAGE_SHIFT+SYM_MEM_PAGE_ORDER)
 158 #define SYM_MEM_FREE_UNUSED     /* Free unused pages immediately */
 159 /*
 160  *  Shortest memory chunk is (1<<SYM_MEM_SHIFT), currently 16.
 161  *  Actual allocations happen as SYM_MEM_CLUSTER_SIZE sized.
 162  *  (1 PAGE at a time is just fine).
 163  */
 164 #define SYM_MEM_SHIFT   4
 165 #define SYM_MEM_CLUSTER_SIZE    (1UL << SYM_MEM_CLUSTER_SHIFT)
 166 #define SYM_MEM_CLUSTER_MASK    (SYM_MEM_CLUSTER_SIZE-1)
 167
 168 /*
 169  *  Number of entries in the START and DONE queues.
 170  *
 171  *  We limit to 1 PAGE in order to succeed allocation of
 172  *  these queues. Each entry is 8 bytes long (2 DWORDS).
 173  */
 174 #ifdef  SYM_CONF_MAX_START
 175 #define SYM_CONF_MAX_QUEUE (SYM_CONF_MAX_START+2)
 176 #else
 177 #define SYM_CONF_MAX_QUEUE (7*SYM_CONF_MAX_TASK+2)
 178 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2)
 179 #endif
 180
 181 #if     SYM_CONF_MAX_QUEUE > SYM_MEM_CLUSTER_SIZE/8
 182 #undef  SYM_CONF_MAX_QUEUE
 183 #define SYM_CONF_MAX_QUEUE (SYM_MEM_CLUSTER_SIZE/8)
 184 #undef  SYM_CONF_MAX_START
 185 #define SYM_CONF_MAX_START (SYM_CONF_MAX_QUEUE-2)
 186 #endif
 187
 188 /*
 189  *  For this one, we want a short name :-)
 190  */
 191 #define MAX_QUEUE       SYM_CONF_MAX_QUEUE
 192
 193 /*
 194  *  Common definitions for both bus space based and legacy IO methods.
 195  */
 196
 197 #define INB_OFF(np, o)          ioread8(np->s.ioaddr + (o))
 198 #define INW_OFF(np, o)          ioread16(np->s.ioaddr + (o))
 199 #define INL_OFF(np, o)          ioread32(np->s.ioaddr + (o))
 200
 201 #define OUTB_OFF(np, o, val)    iowrite8((val), np->s.ioaddr + (o))
 202 #define OUTW_OFF(np, o, val)    iowrite16((val), np->s.ioaddr + (o))
 203 #define OUTL_OFF(np, o, val)    iowrite32((val), np->s.ioaddr + (o))
 204
 205 #define INB(np, r)              INB_OFF(np, offsetof(struct sym_reg, r))
 206 #define INW(np, r)              INW_OFF(np, offsetof(struct sym_reg, r))
 207 #define INL(np, r)              INL_OFF(np, offsetof(struct sym_reg, r))
 208
 209 #define OUTB(np, r, v)          OUTB_OFF(np, offsetof(struct sym_reg, r), (v))
 210 #define OUTW(np, r, v)          OUTW_OFF(np, offsetof(struct sym_reg, r), (v))
 211 #define OUTL(np, r, v)          OUTL_OFF(np, offsetof(struct sym_reg, r), (v))
 212
 213 #define OUTONB(np, r, m)        OUTB(np, r, INB(np, r) | (m))
 214 #define OUTOFFB(np, r, m)       OUTB(np, r, INB(np, r) & ~(m))
 215 #define OUTONW(np, r, m)        OUTW(np, r, INW(np, r) | (m))
 216 #define OUTOFFW(np, r, m)       OUTW(np, r, INW(np, r) & ~(m))
 217 #define OUTONL(np, r, m)        OUTL(np, r, INL(np, r) | (m))
 218 #define OUTOFFL(np, r, m)       OUTL(np, r, INL(np, r) & ~(m))
 219
 220 /*
 221  *  We normally want the chip to have a consistent view
 222  *  of driver internal data structures when we restart it.
 223  *  Thus these macros.
 224  */
 225 #define OUTL_DSP(np, v)                         \
 226         do {                                    \
 227                 MEMORY_WRITE_BARRIER();         \
 228                 OUTL(np, nc_dsp, (v));          \
 229         } while (0)
 230
 231 #define OUTONB_STD()                            \
 232         do {                                    \
 233                 MEMORY_WRITE_BARRIER();         \
 234                 OUTONB(np, nc_dcntl, (STD|NOCOM));      \
 235         } while (0)
 236
 237 /*
 238  *  Command control block states.
 239  */
 240 #define HS_IDLE         (0)
 241 #define HS_BUSY         (1)
 242 #define HS_NEGOTIATE    (2)     /* sync/wide data transfer*/
 243 #define HS_DISCONNECT   (3)     /* Disconnected by target */
 244 #define HS_WAIT         (4)     /* waiting for resource   */
 245
 246 #define HS_DONEMASK     (0x80)
 247 #define HS_COMPLETE     (4|HS_DONEMASK)
 248 #define HS_SEL_TIMEOUT  (5|HS_DONEMASK) /* Selection timeout      */
 249 #define HS_UNEXPECTED   (6|HS_DONEMASK) /* Unexpected disconnect  */
 250 #define HS_COMP_ERR     (7|HS_DONEMASK) /* Completed with error   */
 251
 252 /*
 253  *  Software Interrupt Codes
 254  */
 255 #define SIR_BAD_SCSI_STATUS     (1)
 256 #define SIR_SEL_ATN_NO_MSG_OUT  (2)
 257 #define SIR_MSG_RECEIVED        (3)
 258 #define SIR_MSG_WEIRD           (4)
 259 #define SIR_NEGO_FAILED         (5)
 260 #define SIR_NEGO_PROTO          (6)
 261 #define SIR_SCRIPT_STOPPED      (7)
 262 #define SIR_REJECT_TO_SEND      (8)
 263 #define SIR_SWIDE_OVERRUN       (9)
 264 #define SIR_SODL_UNDERRUN       (10)
 265 #define SIR_RESEL_NO_MSG_IN     (11)
 266 #define SIR_RESEL_NO_IDENTIFY   (12)
 267 #define SIR_RESEL_BAD_LUN       (13)
 268 #define SIR_TARGET_SELECTED     (14)
 269 #define SIR_RESEL_BAD_I_T_L     (15)
 270 #define SIR_RESEL_BAD_I_T_L_Q   (16)
 271 #define SIR_ABORT_SENT          (17)
 272 #define SIR_RESEL_ABORTED       (18)
 273 #define SIR_MSG_OUT_DONE        (19)
 274 #define SIR_COMPLETE_ERROR      (20)
 275 #define SIR_DATA_OVERRUN        (21)
 276 #define SIR_BAD_PHASE           (22)
 277 #if     SYM_CONF_DMA_ADDRESSING_MODE == 2
 278 #define SIR_DMAP_DIRTY          (23)
 279 #define SIR_MAX                 (23)
 280 #else
 281 #define SIR_MAX                 (22)
 282 #endif
 283
 284 /*
 285  *  Extended error bit codes.
 286  *  xerr_status field of struct sym_ccb.
 287  */
 288 #define XE_EXTRA_DATA   (1)     /* unexpected data phase         */
 289 #define XE_BAD_PHASE    (1<<1)  /* illegal phase (4/5)           */
 290 #define XE_PARITY_ERR   (1<<2)  /* unrecovered SCSI parity error */
 291 #define XE_SODL_UNRUN   (1<<3)  /* ODD transfer in DATA OUT phase */
 292 #define XE_SWIDE_OVRUN  (1<<4)  /* ODD transfer in DATA IN phase */
 293
 294 /*
 295  *  Negotiation status.
 296  *  nego_status field of struct sym_ccb.
 297  */
 298 #define NS_SYNC         (1)
 299 #define NS_WIDE         (2)
 300 #define NS_PPR          (3)
 301
 302 /*
 303  *  A CCB hashed table is used to retrieve CCB address
 304  *  from DSA value.
 305  */
 306 #define CCB_HASH_SHIFT          8
 307 #define CCB_HASH_SIZE           (1UL << CCB_HASH_SHIFT)
 308 #define CCB_HASH_MASK           (CCB_HASH_SIZE-1)
 309 #if 1
 310 #define CCB_HASH_CODE(dsa)      \
 311         (((dsa) >> (_LGRU16_(sizeof(struct sym_ccb)))) & CCB_HASH_MASK)
 312 #else
 313 #define CCB_HASH_CODE(dsa)      (((dsa) >> 9) & CCB_HASH_MASK)
 314 #endif
 315
 316 #if     SYM_CONF_DMA_ADDRESSING_MODE == 2
 317 /*
 318  *  We may want to use segment registers for 64 bit DMA.
 319  *  16 segments registers -> up to 64 GB addressable.
 320  */
 321 #define SYM_DMAP_SHIFT  (4)
 322 #define SYM_DMAP_SIZE   (1u<<SYM_DMAP_SHIFT)
 323 #define SYM_DMAP_MASK   (SYM_DMAP_SIZE-1)
 324 #endif
 325
 326 /*
 327  *  Device flags.
 328  */
 329 #define SYM_DISC_ENABLED        (1)
 330 #define SYM_TAGS_ENABLED        (1<<1)
 331 #define SYM_SCAN_BOOT_DISABLED  (1<<2)
 332 #define SYM_SCAN_LUNS_DISABLED  (1<<3)
 333
 334 /*
 335  *  Host adapter miscellaneous flags.
 336  */
 337 #define SYM_AVOID_BUS_RESET     (1)
 338
 339 /*
 340  *  Misc.
 341  */
 342 #define SYM_SNOOP_TIMEOUT (10000000)
 343 #define BUS_8_BIT       0
 344 #define BUS_16_BIT      1
 345
 346 /*
 347  *  Gather negotiable parameters value
 348  */
 349 struct sym_trans {
 350         u8 period;
 351         u8 offset;
 352         unsigned int width:1;
 353         unsigned int iu:1;
 354         unsigned int dt:1;
 355         unsigned int qas:1;
 356         unsigned int check_nego:1;
 357         unsigned int renego:2;
 358 };
 359
 360 /*
 361  *  Global TCB HEADER.
 362  *
 363  *  Due to lack of indirect addressing on earlier NCR chips,
 364  *  this substructure is copied from the TCB to a global
 365  *  address after selection.
 366  *  For SYMBIOS chips that support LOAD/STORE this copy is
 367  *  not needed and thus not performed.
 368  */
 369 struct sym_tcbh {
 370         /*
 371          *  Scripts bus addresses of LUN table accessed from scripts.
 372          *  LUN #0 is a special case, since multi-lun devices are rare,
 373          *  and we we want to speed-up the general case and not waste
 374          *  resources.
 375          */
 376         u32     luntbl_sa;      /* bus address of this table    */
 377         u32     lun0_sa;        /* bus address of LCB #0        */
 378         /*
 379          *  Actual SYNC/WIDE IO registers value for this target.
 380          *  'sval', 'wval' and 'uval' are read from SCRIPTS and
 381          *  so have alignment constraints.
 382          */
 383 /*0*/   u_char  uval;           /* -> SCNTL4 register           */
 384 /*1*/   u_char  sval;           /* -> SXFER  io register        */
 385 /*2*/   u_char  filler1;
 386 /*3*/   u_char  wval;           /* -> SCNTL3 io register        */
 387 };
 388
 389 /*
 390  *  Target Control Block
 391  */
 392 struct sym_tcb {
 393         /*
 394          *  TCB header.
 395          *  Assumed at offset 0.
 396          */
 397 /*0*/   struct sym_tcbh head;
 398
 399         /*
 400          *  LUN table used by the SCRIPTS processor.
 401          *  An array of bus addresses is used on reselection.
 402          */
 403         u32     *luntbl;        /* LCBs bus address table       */
 404         int     nlcb;           /* Number of valid LCBs (including LUN #0) */
 405
 406         /*
 407          *  LUN table used by the C code.
 408          */
 409         struct sym_lcb *lun0p;          /* LCB of LUN #0 (usual case)   */
 410 #if SYM_CONF_MAX_LUN > 1
 411         struct sym_lcb **lunmp;         /* Other LCBs [1..MAX_LUN]      */
 412 #endif
 413
 414 #ifdef  SYM_HAVE_STCB
 415         /*
 416          *  O/S specific data structure.
 417          */
 418         struct sym_stcb s;
 419 #endif
 420
 421         /* Transfer goal */
 422         struct sym_trans tgoal;
 423
 424         /* Last printed transfer speed */
 425         struct sym_trans tprint;
 426
 427         /*
 428          * Keep track of the CCB used for the negotiation in order
 429          * to ensure that only 1 negotiation is queued at a time.
 430          */
 431         struct sym_ccb *  nego_cp;      /* CCB used for the nego                */
 432
 433         /*
 434          *  Set when we want to reset the device.
 435          */
 436         u_char  to_reset;
 437
 438         /*
 439          *  Other user settable limits and options.
 440          *  These limits are read from the NVRAM if present.
 441          */
 442         unsigned char   usrflags;
 443         unsigned char   usr_period;
 444         unsigned char   usr_width;
 445         unsigned short  usrtags;
 446         struct scsi_target *starget;
 447 };
 448
 449 /*
 450  *  Global LCB HEADER.
 451  *
 452  *  Due to lack of indirect addressing on earlier NCR chips,
 453  *  this substructure is copied from the LCB to a global
 454  *  address after selection.
 455  *  For SYMBIOS chips that support LOAD/STORE this copy is
 456  *  not needed and thus not performed.
 457  */
 458 struct sym_lcbh {
 459         /*
 460          *  SCRIPTS address jumped by SCRIPTS on reselection.
 461          *  For not probed logical units, this address points to
 462          *  SCRIPTS that deal with bad LU handling (must be at
 463          *  offset zero of the LCB for that reason).
 464          */
 465 /*0*/   u32     resel_sa;
 466
 467         /*
 468          *  Task (bus address of a CCB) read from SCRIPTS that points
 469          *  to the unique ITL nexus allowed to be disconnected.
 470          */
 471         u32     itl_task_sa;
 472
 473         /*
 474          *  Task table bus address (read from SCRIPTS).
 475          */
 476         u32     itlq_tbl_sa;
 477 };
 478
 479 /*
 480  *  Logical Unit Control Block
 481  */
 482 struct sym_lcb {
 483         /*
 484          *  TCB header.
 485          *  Assumed at offset 0.
 486          */
 487 /*0*/   struct sym_lcbh head;
 488
 489         /*
 490          *  Task table read from SCRIPTS that contains pointers to
 491          *  ITLQ nexuses. The bus address read from SCRIPTS is
 492          *  inside the header.
 493          */
 494         u32     *itlq_tbl;      /* Kernel virtual address       */
 495
 496         /*
 497          *  Busy CCBs management.
 498          */
 499         u_short busy_itlq;      /* Number of busy tagged CCBs   */
 500         u_short busy_itl;       /* Number of busy untagged CCBs */
 501
 502         /*
 503          *  Circular tag allocation buffer.
 504          */
 505         u_short ia_tag;         /* Tag allocation index         */
 506         u_short if_tag;         /* Tag release index            */
 507         u_char  *cb_tags;       /* Circular tags buffer         */
 508
 509         /*
 510          *  O/S specific data structure.
 511          */
 512 #ifdef  SYM_HAVE_SLCB
 513         struct sym_slcb s;
 514 #endif
 515
 516 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
 517         /*
 518          *  Optionnaly the driver can handle device queueing,
 519          *  and requeues internally command to redo.
 520          */
 521         SYM_QUEHEAD waiting_ccbq;
 522         SYM_QUEHEAD started_ccbq;
 523         int     num_sgood;
 524         u_short started_tags;
 525         u_short started_no_tag;
 526         u_short started_max;
 527         u_short started_limit;
 528 #endif
 529
 530 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
 531         /*
 532          *  Optionally the driver can try to prevent SCSI
 533          *  IOs from being reordered too much.
 534          */
 535         u_char          tags_si;        /* Current index to tags sum    */
 536         u_short         tags_sum[2];    /* Tags sum counters            */
 537         u_short         tags_since;     /* # of tags since last switch  */
 538 #endif
 539
 540         /*
 541          *  Set when we want to clear all tasks.
 542          */
 543         u_char to_clear;
 544
 545         /*
 546          *  Capabilities.
 547          */
 548         u_char  user_flags;
 549         u_char  curr_flags;
 550 };
 551
 552 /*
 553  *  Action from SCRIPTS on a task.
 554  *  Is part of the CCB, but is also used separately to plug
 555  *  error handling action to perform from SCRIPTS.
 556  */
 557 struct sym_actscr {
 558         u32     start;          /* Jumped by SCRIPTS after selection    */
 559         u32     restart;        /* Jumped by SCRIPTS on relection       */
 560 };
 561
 562 /*
 563  *  Phase mismatch context.
 564  *
 565  *  It is part of the CCB and is used as parameters for the
 566  *  DATA pointer. We need two contexts to handle correctly the
 567  *  SAVED DATA POINTER.
 568  */
 569 struct sym_pmc {
 570         struct  sym_tblmove sg; /* Updated interrupted SG block */
 571         u32     ret;            /* SCRIPT return address        */
 572 };
 573
 574 /*
 575  *  LUN control block lookup.
 576  *  We use a direct pointer for LUN #0, and a table of
 577  *  pointers which is only allocated for devices that support
 578  *  LUN(s) > 0.
 579  */
 580 #if SYM_CONF_MAX_LUN <= 1
 581 #define sym_lp(tp, lun) (!lun) ? (tp)->lun0p : NULL
 582 #else
 583 #define sym_lp(tp, lun) \
 584         (!lun) ? (tp)->lun0p : (tp)->lunmp ? (tp)->lunmp[(lun)] : NULL
 585 #endif
 586
 587 /*
 588  *  Status are used by the host and the script processor.
 589  *
 590  *  The last four bytes (status[4]) are copied to the
 591  *  scratchb register (declared as scr0..scr3) just after the
 592  *  select/reselect, and copied back just after disconnecting.
 593  *  Inside the script the XX_REG are used.
 594  */
 595
 596 /*
 597  *  Last four bytes (script)
 598  */
 599 #define  HX_REG scr0
 600 #define  HX_PRT nc_scr0
 601 #define  HS_REG scr1
 602 #define  HS_PRT nc_scr1
 603 #define  SS_REG scr2
 604 #define  SS_PRT nc_scr2
 605 #define  HF_REG scr3
 606 #define  HF_PRT nc_scr3
 607
 608 /*
 609  *  Last four bytes (host)
 610  */
 611 #define  host_xflags   phys.head.status[0]
 612 #define  host_status   phys.head.status[1]
 613 #define  ssss_status   phys.head.status[2]
 614 #define  host_flags    phys.head.status[3]
 615
 616 /*
 617  *  Host flags
 618  */
 619 #define HF_IN_PM0       1u
 620 #define HF_IN_PM1       (1u<<1)
 621 #define HF_ACT_PM       (1u<<2)
 622 #define HF_DP_SAVED     (1u<<3)
 623 #define HF_SENSE        (1u<<4)
 624 #define HF_EXT_ERR      (1u<<5)
 625 #define HF_DATA_IN      (1u<<6)
 626 #ifdef SYM_CONF_IARB_SUPPORT
 627 #define HF_HINT_IARB    (1u<<7)
 628 #endif
 629
 630 /*
 631  *  More host flags
 632  */
 633 #if     SYM_CONF_DMA_ADDRESSING_MODE == 2
 634 #define HX_DMAP_DIRTY   (1u<<7)
 635 #endif
 636
 637 /*
 638  *  Global CCB HEADER.
 639  *
 640  *  Due to lack of indirect addressing on earlier NCR chips,
 641  *  this substructure is copied from the ccb to a global
 642  *  address after selection (or reselection) and copied back
 643  *  before disconnect.
 644  *  For SYMBIOS chips that support LOAD/STORE this copy is
 645  *  not needed and thus not performed.
 646  */
 647
 648 struct sym_ccbh {
 649         /*
 650          *  Start and restart SCRIPTS addresses (must be at 0).
 651          */
 652 /*0*/   struct sym_actscr go;
 653
 654         /*
 655          *  SCRIPTS jump address that deal with data pointers.
 656          *  'savep' points to the position in the script responsible
 657          *  for the actual transfer of data.
 658          *  It's written on reception of a SAVE_DATA_POINTER message.
 659          */
 660         u32     savep;          /* Jump address to saved data pointer   */
 661         u32     lastp;          /* SCRIPTS address at end of data       */
 662
 663         /*
 664          *  Status fields.
 665          */
 666         u8      status[4];
 667 };
 668
 669 /*
 670  *  GET/SET the value of the data pointer used by SCRIPTS.
 671  *
 672  *  We must distinguish between the LOAD/STORE-based SCRIPTS
 673  *  that use directly the header in the CCB, and the NCR-GENERIC
 674  *  SCRIPTS that use the copy of the header in the HCB.
 675  */
 676 #if     SYM_CONF_GENERIC_SUPPORT
 677 #define sym_set_script_dp(np, cp, dp)                           \
 678         do {                                                    \
 679                 if (np->features & FE_LDSTR)                    \
 680                         cp->phys.head.lastp = cpu_to_scr(dp);   \
 681                 else                                            \
 682                         np->ccb_head.lastp = cpu_to_scr(dp);    \
 683         } while (0)
 684 #define sym_get_script_dp(np, cp)                               \
 685         scr_to_cpu((np->features & FE_LDSTR) ?                  \
 686                 cp->phys.head.lastp : np->ccb_head.lastp)
 687 #else
 688 #define sym_set_script_dp(np, cp, dp)                           \
 689         do {                                                    \
 690                 cp->phys.head.lastp = cpu_to_scr(dp);           \
 691         } while (0)
 692
 693 #define sym_get_script_dp(np, cp) (cp->phys.head.lastp)
 694 #endif
 695
 696 /*
 697  *  Data Structure Block
 698  *
 699  *  During execution of a ccb by the script processor, the
 700  *  DSA (data structure address) register points to this
 701  *  substructure of the ccb.
 702  */
 703 struct sym_dsb {
 704         /*
 705          *  CCB header.
 706          *  Also assumed at offset 0 of the sym_ccb structure.
 707          */
 708 /*0*/   struct sym_ccbh head;
 709
 710         /*
 711          *  Phase mismatch contexts.
 712          *  We need two to handle correctly the SAVED DATA POINTER.
 713          *  MUST BOTH BE AT OFFSET < 256, due to using 8 bit arithmetic
 714          *  for address calculation from SCRIPTS.
 715          */
 716         struct sym_pmc pm0;
 717         struct sym_pmc pm1;
 718
 719         /*
 720          *  Table data for Script
 721          */
 722         struct sym_tblsel  select;
 723         struct sym_tblmove smsg;
 724         struct sym_tblmove smsg_ext;
 725         struct sym_tblmove cmd;
 726         struct sym_tblmove sense;
 727         struct sym_tblmove wresid;
 728         struct sym_tblmove data [SYM_CONF_MAX_SG];
 729 };
 730
 731 /*
 732  *  Our Command Control Block
 733  */
 734 struct sym_ccb {
 735         /*
 736          *  This is the data structure which is pointed by the DSA
 737          *  register when it is executed by the script processor.
 738          *  It must be the first entry.
 739          */
 740         struct sym_dsb phys;
 741
 742         /*
 743          *  Pointer to CAM ccb and related stuff.
 744          */
 745         struct scsi_cmnd *cmd;  /* CAM scsiio ccb               */
 746         u8      cdb_buf[16];    /* Copy of CDB                  */
 747 #define SYM_SNS_BBUF_LEN 32
 748         u8      sns_bbuf[SYM_SNS_BBUF_LEN]; /* Bounce buffer for sense data */
 749         int     data_len;       /* Total data length            */
 750         int     segments;       /* Number of SG segments        */
 751
 752         u8      order;          /* Tag type (if tagged command) */
 753         unsigned char odd_byte_adjustment;      /* odd-sized req on wide bus */
 754
 755         u_char  nego_status;    /* Negotiation status           */
 756         u_char  xerr_status;    /* Extended error flags         */
 757         u32     extra_bytes;    /* Extraneous bytes transferred */
 758
 759         /*
 760          *  Message areas.
 761          *  We prepare a message to be sent after selection.
 762          *  We may use a second one if the command is rescheduled
 763          *  due to CHECK_CONDITION or COMMAND TERMINATED.
 764          *  Contents are IDENTIFY and SIMPLE_TAG.
 765          *  While negotiating sync or wide transfer,
 766          *  a SDTR or WDTR message is appended.
 767          */
 768         u_char  scsi_smsg [12];
 769         u_char  scsi_smsg2[12];
 770
 771         /*
 772          *  Auto request sense related fields.
 773          */
 774         u_char  sensecmd[6];    /* Request Sense command        */
 775         u_char  sv_scsi_status; /* Saved SCSI status            */
 776         u_char  sv_xerr_status; /* Saved extended status        */
 777         int     sv_resid;       /* Saved residual               */
 778
 779         /*
 780          *  Other fields.
 781          */
 782         u32     ccb_ba;         /* BUS address of this CCB      */
 783         u_short tag;            /* Tag for this transfer        */
 784                                 /*  NO_TAG means no tag         */
 785         u_char  target;
 786         u_char  lun;
 787         struct sym_ccb *link_ccbh;      /* Host adapter CCB hash chain  */
 788         SYM_QUEHEAD link_ccbq;  /* Link to free/busy CCB queue  */
 789         u32     startp;         /* Initial data pointer         */
 790         u32     goalp;          /* Expected last data pointer   */
 791         int     ext_sg;         /* Extreme data pointer, used   */
 792         int     ext_ofs;        /*  to calculate the residual.  */
 793 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
 794         SYM_QUEHEAD link2_ccbq; /* Link for device queueing     */
 795         u_char  started;        /* CCB queued to the squeue     */
 796 #endif
 797         u_char  to_abort;       /* Want this IO to be aborted   */
 798 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
 799         u_char  tags_si;        /* Lun tags sum index (0,1)     */
 800 #endif
 801 };
 802
 803 #define CCB_BA(cp,lbl)  cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl))
 804
 805 typedef struct device *m_pool_ident_t;
 806
 807 /*
 808  *  Host Control Block
 809  */
 810 struct sym_hcb {
 811         /*
 812          *  Global headers.
 813          *  Due to poorness of addressing capabilities, earlier
 814          *  chips (810, 815, 825) copy part of the data structures
 815          *  (CCB, TCB and LCB) in fixed areas.
 816          */
 817 #if     SYM_CONF_GENERIC_SUPPORT
 818         struct sym_ccbh ccb_head;
 819         struct sym_tcbh tcb_head;
 820         struct sym_lcbh lcb_head;
 821 #endif
 822         /*
 823          *  Idle task and invalid task actions and
 824          *  their bus addresses.
 825          */
 826         struct sym_actscr idletask, notask, bad_itl, bad_itlq;
 827         u32 idletask_ba, notask_ba, bad_itl_ba, bad_itlq_ba;
 828
 829         /*
 830          *  Dummy lun table to protect us against target
 831          *  returning bad lun number on reselection.
 832          */
 833         u32     *badluntbl;     /* Table physical address       */
 834         u32     badlun_sa;      /* SCRIPT handler BUS address   */
 835
 836         /*
 837          *  Bus address of this host control block.
 838          */
 839         u32     hcb_ba;
 840
 841         /*
 842          *  Bit 32-63 of the on-chip RAM bus address in LE format.
 843          *  The START_RAM64 script loads the MMRS and MMWS from this
 844          *  field.
 845          */
 846         u32     scr_ram_seg;
 847
 848         /*
 849          *  Initial value of some IO register bits.
 850          *  These values are assumed to have been set by BIOS, and may
 851          *  be used to probe adapter implementation differences.
 852          */
 853         u_char  sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest3, sv_ctest4,
 854                 sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4, sv_scntl4,
 855                 sv_stest1;
 856
 857         /*
 858          *  Actual initial value of IO register bits used by the
 859          *  driver. They are loaded at initialisation according to
 860          *  features that are to be enabled/disabled.
 861          */
 862         u_char  rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest3, rv_ctest4,
 863                 rv_ctest5, rv_stest2, rv_ccntl0, rv_ccntl1, rv_scntl4;
 864
 865         /*
 866          *  Target data.
 867          */
 868         struct sym_tcb  target[SYM_CONF_MAX_TARGET];
 869
 870         /*
 871          *  Target control block bus address array used by the SCRIPT
 872          *  on reselection.
 873          */
 874         u32             *targtbl;
 875         u32             targtbl_ba;
 876
 877         /*
 878          *  DMA pool handle for this HBA.
 879          */
 880         m_pool_ident_t  bus_dmat;
 881
 882         /*
 883          *  O/S specific data structure
 884          */
 885         struct sym_shcb s;
 886
 887         /*
 888          *  Physical bus addresses of the chip.
 889          */
 890         u32             mmio_ba;        /* MMIO 32 bit BUS address      */
 891         u32             ram_ba;         /* RAM 32 bit BUS address       */
 892
 893         /*
 894          *  SCRIPTS virtual and physical bus addresses.
 895          *  'script'  is loaded in the on-chip RAM if present.
 896          *  'scripth' stays in main memory for all chips except the
 897          *  53C895A, 53C896 and 53C1010 that provide 8K on-chip RAM.
 898          */
 899         u_char          *scripta0;      /* Copy of scripts A, B, Z      */
 900         u_char          *scriptb0;
 901         u_char          *scriptz0;
 902         u32             scripta_ba;     /* Actual scripts A, B, Z       */
 903         u32             scriptb_ba;     /* 32 bit bus addresses.        */
 904         u32             scriptz_ba;
 905         u_short         scripta_sz;     /* Actual size of script A, B, Z*/
 906         u_short         scriptb_sz;
 907         u_short         scriptz_sz;
 908
 909         /*
 910          *  Bus addresses, setup and patch methods for
 911          *  the selected firmware.
 912          */
 913         struct sym_fwa_ba fwa_bas;      /* Useful SCRIPTA bus addresses */
 914         struct sym_fwb_ba fwb_bas;      /* Useful SCRIPTB bus addresses */
 915         struct sym_fwz_ba fwz_bas;      /* Useful SCRIPTZ bus addresses */
 916         void            (*fw_setup)(struct sym_hcb *np, struct sym_fw *fw);
 917         void            (*fw_patch)(struct Scsi_Host *);
 918         char            *fw_name;
 919
 920         /*
 921          *  General controller parameters and configuration.
 922          */
 923         u_int   features;       /* Chip features map            */
 924         u_char  myaddr;         /* SCSI id of the adapter       */
 925         u_char  maxburst;       /* log base 2 of dwords burst   */
 926         u_char  maxwide;        /* Maximum transfer width       */
 927         u_char  minsync;        /* Min sync period factor (ST)  */
 928         u_char  maxsync;        /* Max sync period factor (ST)  */
 929         u_char  maxoffs;        /* Max scsi offset        (ST)  */
 930         u_char  minsync_dt;     /* Min sync period factor (DT)  */
 931         u_char  maxsync_dt;     /* Max sync period factor (DT)  */
 932         u_char  maxoffs_dt;     /* Max scsi offset        (DT)  */
 933         u_char  multiplier;     /* Clock multiplier (1,2,4)     */
 934         u_char  clock_divn;     /* Number of clock divisors     */
 935         u32     clock_khz;      /* SCSI clock frequency in KHz  */
 936         u32     pciclk_khz;     /* Estimated PCI clock  in KHz  */
 937         /*
 938          *  Start queue management.
 939          *  It is filled up by the host processor and accessed by the
 940          *  SCRIPTS processor in order to start SCSI commands.
 941          */
 942         volatile                /* Prevent code optimizations   */
 943         u32     *squeue;        /* Start queue virtual address  */
 944         u32     squeue_ba;      /* Start queue BUS address      */
 945         u_short squeueput;      /* Next free slot of the queue  */
 946         u_short actccbs;        /* Number of allocated CCBs     */
 947
 948         /*
 949          *  Command completion queue.
 950          *  It is the same size as the start queue to avoid overflow.
 951          */
 952         u_short dqueueget;      /* Next position to scan        */
 953         volatile                /* Prevent code optimizations   */
 954         u32     *dqueue;        /* Completion (done) queue      */
 955         u32     dqueue_ba;      /* Done queue BUS address       */
 956
 957         /*
 958          *  Miscellaneous buffers accessed by the scripts-processor.
 959          *  They shall be DWORD aligned, because they may be read or
 960          *  written with a script command.
 961          */
 962         u_char          msgout[8];      /* Buffer for MESSAGE OUT       */
 963         u_char          msgin [8];      /* Buffer for MESSAGE IN        */
 964         u32             lastmsg;        /* Last SCSI message sent       */
 965         u32             scratch;        /* Scratch for SCSI receive     */
 966                                         /* Also used for cache test     */
 967         /*
 968          *  Miscellaneous configuration and status parameters.
 969          */
 970         u_char          usrflags;       /* Miscellaneous user flags     */
 971         u_char          scsi_mode;      /* Current SCSI BUS mode        */
 972         u_char          verbose;        /* Verbosity for this controller*/
 973
 974         /*
 975          *  CCB lists and queue.
 976          */
 977         struct sym_ccb **ccbh;                  /* CCBs hashed by DSA value     */
 978                                         /* CCB_HASH_SIZE lists of CCBs  */
 979         SYM_QUEHEAD     free_ccbq;      /* Queue of available CCBs      */
 980         SYM_QUEHEAD     busy_ccbq;      /* Queue of busy CCBs           */
 981
 982         /*
 983          *  During error handling and/or recovery,
 984          *  active CCBs that are to be completed with
 985          *  error or requeued are moved from the busy_ccbq
 986          *  to the comp_ccbq prior to completion.
 987          */
 988         SYM_QUEHEAD     comp_ccbq;
 989
 990 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
 991         SYM_QUEHEAD     dummy_ccbq;
 992 #endif
 993
 994         /*
 995          *  IMMEDIATE ARBITRATION (IARB) control.
 996          *
 997          *  We keep track in 'last_cp' of the last CCB that has been
 998          *  queued to the SCRIPTS processor and clear 'last_cp' when
 999          *  this CCB completes. If last_cp is not zero at the moment
1000          *  we queue a new CCB, we set a flag in 'last_cp' that is
1001          *  used by the SCRIPTS as a hint for setting IARB.
1002          *  We donnot set more than 'iarb_max' consecutive hints for
1003          *  IARB in order to leave devices a chance to reselect.
1004          *  By the way, any non zero value of 'iarb_max' is unfair. :)
1005          */
1006 #ifdef SYM_CONF_IARB_SUPPORT
1007         u_short         iarb_max;       /* Max. # consecutive IARB hints*/
1008         u_short         iarb_count;     /* Actual # of these hints      */
1009         struct sym_ccb *        last_cp;
1010 #endif
1011
1012         /*
1013          *  Command abort handling.
1014          *  We need to synchronize tightly with the SCRIPTS
1015          *  processor in order to handle things correctly.
1016          */
1017         u_char          abrt_msg[4];    /* Message to send buffer       */
1018         struct sym_tblmove abrt_tbl;    /* Table for the MOV of it      */
1019         struct sym_tblsel  abrt_sel;    /* Sync params for selection    */
1020         u_char          istat_sem;      /* Tells the chip to stop (SEM) */
1021
1022         /*
1023          *  64 bit DMA handling.
1024          */
1025 #if     SYM_CONF_DMA_ADDRESSING_MODE != 0
1026         u_char  use_dac;                /* Use PCI DAC cycles           */
1027 #if     SYM_CONF_DMA_ADDRESSING_MODE == 2
1028         u_char  dmap_dirty;             /* Dma segments registers dirty */
1029         u32     dmap_bah[SYM_DMAP_SIZE];/* Segment registers map        */
1030 #endif
1031 #endif
1032 };
1033
1034 #if SYM_CONF_DMA_ADDRESSING_MODE == 0
1035 #define use_dac(np)     0
1036 #define set_dac(np)     do { } while (0)
1037 #else
1038 #define use_dac(np)     (np)->use_dac
1039 #define set_dac(np)     (np)->use_dac = 1
1040 #endif
1041
1042 #define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl))
1043
1044
1045 /*
1046  *  FIRMWARES (sym_fw.c)
1047  */
1048 struct sym_fw * sym_find_firmware(struct sym_chip *chip);
1049 void sym_fw_bind_script(struct sym_hcb *np, u32 *start, int len);
1050
1051 /*
1052  *  Driver methods called from O/S specific code.
1053  */
1054 char *sym_driver_name(void);
1055 void sym_print_xerr(struct scsi_cmnd *cmd, int x_status);
1056 int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int);
1057 struct sym_chip *sym_lookup_chip_table(u_short device_id, u_char revision);
1058 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1059 void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn);
1060 #else
1061 void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp);
1062 #endif
1063 void sym_start_up(struct Scsi_Host *, int reason);
1064 irqreturn_t sym_interrupt(struct Scsi_Host *);
1065 int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task);
1066 struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
1067 void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
1068 struct sym_lcb *sym_alloc_lcb(struct sym_hcb *np, u_char tn, u_char ln);
1069 int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln);
1070 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
1071 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *ccb, int timed_out);
1072 int sym_reset_scsi_target(struct sym_hcb *np, int target);
1073 void sym_hcb_free(struct sym_hcb *np);
1074 int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram *nvram);
1075
1076 /*
1077  *  Build a scatter/gather entry.
1078  *
1079  *  For 64 bit systems, we use the 8 upper bits of the size field
1080  *  to provide bus address bits 32-39 to the SCRIPTS processor.
1081  *  This allows the 895A, 896, 1010 to address up to 1 TB of memory.
1082  */
1083
1084 #if   SYM_CONF_DMA_ADDRESSING_MODE == 0
1085 #define DMA_DAC_MASK    DMA_BIT_MASK(32)
1086 #define sym_build_sge(np, data, badd, len)      \
1087 do {                                            \
1088         (data)->addr = cpu_to_scr(badd);        \
1089         (data)->size = cpu_to_scr(len);         \
1090 } while (0)
1091 #elif SYM_CONF_DMA_ADDRESSING_MODE == 1
1092 #define DMA_DAC_MASK    DMA_BIT_MASK(40)
1093 #define sym_build_sge(np, data, badd, len)                              \
1094 do {                                                                    \
1095         (data)->addr = cpu_to_scr(badd);                                \
1096         (data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len);  \
1097 } while (0)
1098 #elif SYM_CONF_DMA_ADDRESSING_MODE == 2
1099 #define DMA_DAC_MASK    DMA_BIT_MASK(64)
1100 int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s);
1101 static inline void
1102 sym_build_sge(struct sym_hcb *np, struct sym_tblmove *data, u64 badd, int len)
1103 {
1104         u32 h = (badd>>32);
1105         int s = (h&SYM_DMAP_MASK);
1106
1107         if (h != np->dmap_bah[s])
1108                 goto bad;
1109 good:
1110         (data)->addr = cpu_to_scr(badd);
1111         (data)->size = cpu_to_scr((s<<24) + len);
1112         return;
1113 bad:
1114         s = sym_lookup_dmap(np, h, s);
1115         goto good;
1116 }
1117 #else
1118 #error "Unsupported DMA addressing mode"
1119 #endif
1120
1121 /*
1122  *  MEMORY ALLOCATOR.
1123  */
1124
1125 #define sym_get_mem_cluster()   \
1126         (void *) __get_free_pages(GFP_ATOMIC, SYM_MEM_PAGE_ORDER)
1127 #define sym_free_mem_cluster(p) \
1128         free_pages((unsigned long)p, SYM_MEM_PAGE_ORDER)
1129
1130 /*
1131  *  Link between free memory chunks of a given size.
1132  */
1133 typedef struct sym_m_link {
1134         struct sym_m_link *next;
1135 } *m_link_p;
1136
1137 /*
1138  *  Virtual to bus physical translation for a given cluster.
1139  *  Such a structure is only useful with DMA abstraction.
1140  */
1141 typedef struct sym_m_vtob {     /* Virtual to Bus address translation */
1142         struct sym_m_vtob *next;
1143         void *vaddr;            /* Virtual address */
1144         dma_addr_t baddr;       /* Bus physical address */
1145 } *m_vtob_p;
1146
1147 /* Hash this stuff a bit to speed up translations */
1148 #define VTOB_HASH_SHIFT         5
1149 #define VTOB_HASH_SIZE          (1UL << VTOB_HASH_SHIFT)
1150 #define VTOB_HASH_MASK          (VTOB_HASH_SIZE-1)
1151 #define VTOB_HASH_CODE(m)       \
1152         ((((unsigned long)(m)) >> SYM_MEM_CLUSTER_SHIFT) & VTOB_HASH_MASK)
1153
1154 /*
1155  *  Memory pool of a given kind.
1156  *  Ideally, we want to use:
1157  *  1) 1 pool for memory we donnot need to involve in DMA.
1158  *  2) The same pool for controllers that require same DMA
1159  *     constraints and features.
1160  *     The OS specific m_pool_id_t thing and the sym_m_pool_match()
1161  *     method are expected to tell the driver about.
1162  */
1163 typedef struct sym_m_pool {
1164         m_pool_ident_t  dev_dmat;       /* Identifies the pool (see above) */
1165         void * (*get_mem_cluster)(struct sym_m_pool *);
1166 #ifdef  SYM_MEM_FREE_UNUSED
1167         void (*free_mem_cluster)(struct sym_m_pool *, void *);
1168 #endif
1169 #define M_GET_MEM_CLUSTER()             mp->get_mem_cluster(mp)
1170 #define M_FREE_MEM_CLUSTER(p)           mp->free_mem_cluster(mp, p)
1171         int nump;
1172         m_vtob_p vtob[VTOB_HASH_SIZE];
1173         struct sym_m_pool *next;
1174         struct sym_m_link h[SYM_MEM_CLUSTER_SHIFT - SYM_MEM_SHIFT + 1];
1175 } *m_pool_p;
1176
1177 /*
1178  *  Alloc, free and translate addresses to bus physical
1179  *  for DMAable memory.
1180  */
1181 void *__sym_calloc_dma(m_pool_ident_t dev_dmat, int size, char *name);
1182 void __sym_mfree_dma(m_pool_ident_t dev_dmat, void *m, int size, char *name);
1183 dma_addr_t __vtobus(m_pool_ident_t dev_dmat, void *m);
1184
1185 /*
1186  * Verbs used by the driver code for DMAable memory handling.
1187  * The _uvptv_ macro avoids a nasty warning about pointer to volatile
1188  * being discarded.
1189  */
1190 #define _uvptv_(p) ((void *)((u_long)(p)))
1191
1192 #define _sym_calloc_dma(np, l, n)       __sym_calloc_dma(np->bus_dmat, l, n)
1193 #define _sym_mfree_dma(np, p, l, n)     \
1194                         __sym_mfree_dma(np->bus_dmat, _uvptv_(p), l, n)
1195 #define sym_calloc_dma(l, n)            _sym_calloc_dma(np, l, n)
1196 #define sym_mfree_dma(p, l, n)          _sym_mfree_dma(np, p, l, n)
1197 #define vtobus(p)                       __vtobus(np->bus_dmat, _uvptv_(p))
1198
1199 /*
1200  *  We have to provide the driver memory allocator with methods for
1201  *  it to maintain virtual to bus physical address translations.
1202  */
1203
1204 #define sym_m_pool_match(mp_id1, mp_id2)        (mp_id1 == mp_id2)
1205
1206 static inline void *sym_m_get_dma_mem_cluster(m_pool_p mp, m_vtob_p vbp)
1207 {
1208         void *vaddr = NULL;
1209         dma_addr_t baddr = 0;
1210
1211         vaddr = dma_alloc_coherent(mp->dev_dmat, SYM_MEM_CLUSTER_SIZE, &baddr,
1212                         GFP_ATOMIC);
1213         if (vaddr) {
1214                 vbp->vaddr = vaddr;
1215                 vbp->baddr = baddr;
1216         }
1217         return vaddr;
1218 }
1219
1220 static inline void sym_m_free_dma_mem_cluster(m_pool_p mp, m_vtob_p vbp)
1221 {
1222         dma_free_coherent(mp->dev_dmat, SYM_MEM_CLUSTER_SIZE, vbp->vaddr,
1223                         vbp->baddr);
1224 }
1225
1226 #endif /* SYM_HIPD_H */