2 * linux/drivers/mtd/onenand/onenand_base.c
4 * Copyright © 2005-2009 Samsung Electronics
5 * Copyright © 2007 Nokia Corporation
7 * Kyungmin Park <kyungmin.park@samsung.com>
10 * Adrian Hunter <ext-adrian.hunter@nokia.com>:
11 * auto-placement support, read-while load support, various fixes
13 * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
14 * Flex-OneNAND support
15 * Amul Kumar Saha <amul.saha at samsung.com>
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/moduleparam.h>
26 #include <linux/slab.h>
27 #include <linux/init.h>
28 #include <linux/sched.h>
29 #include <linux/delay.h>
30 #include <linux/interrupt.h>
31 #include <linux/jiffies.h>
32 #include <linux/mtd/mtd.h>
33 #include <linux/mtd/onenand.h>
34 #include <linux/mtd/partitions.h>
39 * Multiblock erase if number of blocks to erase is 2 or more.
40 * Maximum number of blocks for simultaneous erase is 64.
42 #define MB_ERASE_MIN_BLK_COUNT 2
43 #define MB_ERASE_MAX_BLK_COUNT 64
45 /* Default Flex-OneNAND boundary and lock respectively */
46 static int flex_bdry
[MAX_DIES
* 2] = { -1, 0, -1, 0 };
48 module_param_array(flex_bdry
, int, NULL
, 0400);
49 MODULE_PARM_DESC(flex_bdry
, "SLC Boundary information for Flex-OneNAND"
50 "Syntax:flex_bdry=DIE_BDRY,LOCK,..."
51 "DIE_BDRY: SLC boundary of the die"
52 "LOCK: Locking information for SLC boundary"
53 " : 0->Set boundary in unlocked status"
54 " : 1->Set boundary in locked status");
56 /* Default OneNAND/Flex-OneNAND OTP options*/
59 module_param(otp
, int, 0400);
60 MODULE_PARM_DESC(otp
, "Corresponding behaviour of OneNAND in OTP"
61 "Syntax : otp=LOCK_TYPE"
62 "LOCK_TYPE : Keys issued, for specific OTP Lock type"
63 " : 0 -> Default (No Blocks Locked)"
64 " : 1 -> OTP Block lock"
65 " : 2 -> 1st Block lock"
66 " : 3 -> BOTH OTP Block and 1st Block lock");
69 * flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
70 * For now, we expose only 64 out of 80 ecc bytes
72 static struct nand_ecclayout flexonenand_oob_128
= {
75 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
76 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
77 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
78 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
79 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
80 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
84 {2, 4}, {18, 4}, {34, 4}, {50, 4},
85 {66, 4}, {82, 4}, {98, 4}, {114, 4}
90 * onenand_oob_128 - oob info for OneNAND with 4KB page
92 * Based on specification:
93 * 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
95 * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
97 * oobfree uses the spare area fields marked as
98 * "Managed by internal ECC logic for Logical Sector Number area"
100 static struct nand_ecclayout onenand_oob_128
= {
103 7, 8, 9, 10, 11, 12, 13, 14, 15,
104 23, 24, 25, 26, 27, 28, 29, 30, 31,
105 39, 40, 41, 42, 43, 44, 45, 46, 47,
106 55, 56, 57, 58, 59, 60, 61, 62, 63,
107 71, 72, 73, 74, 75, 76, 77, 78, 79,
108 87, 88, 89, 90, 91, 92, 93, 94, 95,
109 103, 104, 105, 106, 107, 108, 109, 110, 111,
113 {2, 3}, {18, 3}, {34, 3}, {50, 3},
114 {66, 3}, {82, 3}, {98, 3}, {114, 3}
119 * onenand_oob_64 - oob info for large (2KB) page
121 static struct nand_ecclayout onenand_oob_64
= {
130 {2, 3}, {14, 2}, {18, 3}, {30, 2},
131 {34, 3}, {46, 2}, {50, 3}, {62, 2}
136 * onenand_oob_32 - oob info for middle (1KB) page
138 static struct nand_ecclayout onenand_oob_32
= {
144 .oobfree
= { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
147 static const unsigned char ffchars
[] = {
148 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
149 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
150 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
151 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
152 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
153 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
154 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
155 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
156 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
157 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
158 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
159 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
160 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
161 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
162 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
163 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
167 * onenand_readw - [OneNAND Interface] Read OneNAND register
168 * @param addr address to read
170 * Read OneNAND register
172 static unsigned short onenand_readw(void __iomem
*addr
)
178 * onenand_writew - [OneNAND Interface] Write OneNAND register with value
179 * @param value value to write
180 * @param addr address to write
182 * Write OneNAND register with value
184 static void onenand_writew(unsigned short value
, void __iomem
*addr
)
190 * onenand_block_address - [DEFAULT] Get block address
191 * @param this onenand chip data structure
192 * @param block the block
193 * @return translated block address if DDP, otherwise same
195 * Setup Start Address 1 Register (F100h)
197 static int onenand_block_address(struct onenand_chip
*this, int block
)
199 /* Device Flash Core select, NAND Flash Block Address */
200 if (block
& this->density_mask
)
201 return ONENAND_DDP_CHIP1
| (block
^ this->density_mask
);
207 * onenand_bufferram_address - [DEFAULT] Get bufferram address
208 * @param this onenand chip data structure
209 * @param block the block
210 * @return set DBS value if DDP, otherwise 0
212 * Setup Start Address 2 Register (F101h) for DDP
214 static int onenand_bufferram_address(struct onenand_chip
*this, int block
)
216 /* Device BufferRAM Select */
217 if (block
& this->density_mask
)
218 return ONENAND_DDP_CHIP1
;
220 return ONENAND_DDP_CHIP0
;
224 * onenand_page_address - [DEFAULT] Get page address
225 * @param page the page address
226 * @param sector the sector address
227 * @return combined page and sector address
229 * Setup Start Address 8 Register (F107h)
231 static int onenand_page_address(int page
, int sector
)
233 /* Flash Page Address, Flash Sector Address */
236 fpa
= page
& ONENAND_FPA_MASK
;
237 fsa
= sector
& ONENAND_FSA_MASK
;
239 return ((fpa
<< ONENAND_FPA_SHIFT
) | fsa
);
243 * onenand_buffer_address - [DEFAULT] Get buffer address
244 * @param dataram1 DataRAM index
245 * @param sectors the sector address
246 * @param count the number of sectors
247 * @return the start buffer value
249 * Setup Start Buffer Register (F200h)
251 static int onenand_buffer_address(int dataram1
, int sectors
, int count
)
255 /* BufferRAM Sector Address */
256 bsa
= sectors
& ONENAND_BSA_MASK
;
259 bsa
|= ONENAND_BSA_DATARAM1
; /* DataRAM1 */
261 bsa
|= ONENAND_BSA_DATARAM0
; /* DataRAM0 */
263 /* BufferRAM Sector Count */
264 bsc
= count
& ONENAND_BSC_MASK
;
266 return ((bsa
<< ONENAND_BSA_SHIFT
) | bsc
);
270 * flexonenand_block- For given address return block number
271 * @param this - OneNAND device structure
272 * @param addr - Address for which block number is needed
274 static unsigned flexonenand_block(struct onenand_chip
*this, loff_t addr
)
276 unsigned boundary
, blk
, die
= 0;
278 if (ONENAND_IS_DDP(this) && addr
>= this->diesize
[0]) {
280 addr
-= this->diesize
[0];
283 boundary
= this->boundary
[die
];
285 blk
= addr
>> (this->erase_shift
- 1);
287 blk
= (blk
+ boundary
+ 1) >> 1;
289 blk
+= die
? this->density_mask
: 0;
293 inline unsigned onenand_block(struct onenand_chip
*this, loff_t addr
)
295 if (!FLEXONENAND(this))
296 return addr
>> this->erase_shift
;
297 return flexonenand_block(this, addr
);
301 * flexonenand_addr - Return address of the block
302 * @this: OneNAND device structure
303 * @block: Block number on Flex-OneNAND
305 * Return address of the block
307 static loff_t
flexonenand_addr(struct onenand_chip
*this, int block
)
310 int die
= 0, boundary
;
312 if (ONENAND_IS_DDP(this) && block
>= this->density_mask
) {
313 block
-= this->density_mask
;
315 ofs
= this->diesize
[0];
318 boundary
= this->boundary
[die
];
319 ofs
+= (loff_t
)block
<< (this->erase_shift
- 1);
320 if (block
> (boundary
+ 1))
321 ofs
+= (loff_t
)(block
- boundary
- 1) << (this->erase_shift
- 1);
325 loff_t
onenand_addr(struct onenand_chip
*this, int block
)
327 if (!FLEXONENAND(this))
328 return (loff_t
)block
<< this->erase_shift
;
329 return flexonenand_addr(this, block
);
331 EXPORT_SYMBOL(onenand_addr
);
334 * onenand_get_density - [DEFAULT] Get OneNAND density
335 * @param dev_id OneNAND device ID
337 * Get OneNAND density from device ID
339 static inline int onenand_get_density(int dev_id
)
341 int density
= dev_id
>> ONENAND_DEVICE_DENSITY_SHIFT
;
342 return (density
& ONENAND_DEVICE_DENSITY_MASK
);
346 * flexonenand_region - [Flex-OneNAND] Return erase region of addr
347 * @param mtd MTD device structure
348 * @param addr address whose erase region needs to be identified
350 int flexonenand_region(struct mtd_info
*mtd
, loff_t addr
)
354 for (i
= 0; i
< mtd
->numeraseregions
; i
++)
355 if (addr
< mtd
->eraseregions
[i
].offset
)
359 EXPORT_SYMBOL(flexonenand_region
);
362 * onenand_command - [DEFAULT] Send command to OneNAND device
363 * @param mtd MTD device structure
364 * @param cmd the command to be sent
365 * @param addr offset to read from or write to
366 * @param len number of bytes to read or write
368 * Send command to OneNAND device. This function is used for middle/large page
369 * devices (1KB/2KB Bytes per page)
371 static int onenand_command(struct mtd_info
*mtd
, int cmd
, loff_t addr
, size_t len
)
373 struct onenand_chip
*this = mtd
->priv
;
374 int value
, block
, page
;
376 /* Address translation */
378 case ONENAND_CMD_UNLOCK
:
379 case ONENAND_CMD_LOCK
:
380 case ONENAND_CMD_LOCK_TIGHT
:
381 case ONENAND_CMD_UNLOCK_ALL
:
386 case FLEXONENAND_CMD_PI_ACCESS
:
387 /* addr contains die index */
388 block
= addr
* this->density_mask
;
392 case ONENAND_CMD_ERASE
:
393 case ONENAND_CMD_MULTIBLOCK_ERASE
:
394 case ONENAND_CMD_ERASE_VERIFY
:
395 case ONENAND_CMD_BUFFERRAM
:
396 case ONENAND_CMD_OTP_ACCESS
:
397 block
= onenand_block(this, addr
);
401 case FLEXONENAND_CMD_READ_PI
:
402 cmd
= ONENAND_CMD_READ
;
403 block
= addr
* this->density_mask
;
408 block
= onenand_block(this, addr
);
409 if (FLEXONENAND(this))
410 page
= (int) (addr
- onenand_addr(this, block
))>>\
413 page
= (int) (addr
>> this->page_shift
);
414 if (ONENAND_IS_2PLANE(this)) {
415 /* Make the even block number */
417 /* Is it the odd plane? */
418 if (addr
& this->writesize
)
422 page
&= this->page_mask
;
426 /* NOTE: The setting order of the registers is very important! */
427 if (cmd
== ONENAND_CMD_BUFFERRAM
) {
428 /* Select DataRAM for DDP */
429 value
= onenand_bufferram_address(this, block
);
430 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS2
);
432 if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this))
433 /* It is always BufferRAM0 */
434 ONENAND_SET_BUFFERRAM0(this);
436 /* Switch to the next data buffer */
437 ONENAND_SET_NEXT_BUFFERRAM(this);
443 /* Write 'DFS, FBA' of Flash */
444 value
= onenand_block_address(this, block
);
445 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS1
);
447 /* Select DataRAM for DDP */
448 value
= onenand_bufferram_address(this, block
);
449 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS2
);
453 /* Now we use page size operation */
454 int sectors
= 0, count
= 0;
458 case FLEXONENAND_CMD_RECOVER_LSB
:
459 case ONENAND_CMD_READ
:
460 case ONENAND_CMD_READOOB
:
461 if (ONENAND_IS_4KB_PAGE(this))
462 /* It is always BufferRAM0 */
463 dataram
= ONENAND_SET_BUFFERRAM0(this);
465 dataram
= ONENAND_SET_NEXT_BUFFERRAM(this);
469 if (ONENAND_IS_2PLANE(this) && cmd
== ONENAND_CMD_PROG
)
470 cmd
= ONENAND_CMD_2X_PROG
;
471 dataram
= ONENAND_CURRENT_BUFFERRAM(this);
475 /* Write 'FPA, FSA' of Flash */
476 value
= onenand_page_address(page
, sectors
);
477 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS8
);
479 /* Write 'BSA, BSC' of DataRAM */
480 value
= onenand_buffer_address(dataram
, sectors
, count
);
481 this->write_word(value
, this->base
+ ONENAND_REG_START_BUFFER
);
484 /* Interrupt clear */
485 this->write_word(ONENAND_INT_CLEAR
, this->base
+ ONENAND_REG_INTERRUPT
);
488 this->write_word(cmd
, this->base
+ ONENAND_REG_COMMAND
);
494 * onenand_read_ecc - return ecc status
495 * @param this onenand chip structure
497 static inline int onenand_read_ecc(struct onenand_chip
*this)
499 int ecc
, i
, result
= 0;
501 if (!FLEXONENAND(this) && !ONENAND_IS_4KB_PAGE(this))
502 return this->read_word(this->base
+ ONENAND_REG_ECC_STATUS
);
504 for (i
= 0; i
< 4; i
++) {
505 ecc
= this->read_word(this->base
+ ONENAND_REG_ECC_STATUS
+ i
*2);
508 if (ecc
& FLEXONENAND_UNCORRECTABLE_ERROR
)
509 return ONENAND_ECC_2BIT_ALL
;
511 result
= ONENAND_ECC_1BIT_ALL
;
518 * onenand_wait - [DEFAULT] wait until the command is done
519 * @param mtd MTD device structure
520 * @param state state to select the max. timeout value
522 * Wait for command done. This applies to all OneNAND command
523 * Read can take up to 30us, erase up to 2ms and program up to 350us
524 * according to general OneNAND specs
526 static int onenand_wait(struct mtd_info
*mtd
, int state
)
528 struct onenand_chip
* this = mtd
->priv
;
529 unsigned long timeout
;
530 unsigned int flags
= ONENAND_INT_MASTER
;
531 unsigned int interrupt
= 0;
534 /* The 20 msec is enough */
535 timeout
= jiffies
+ msecs_to_jiffies(20);
536 while (time_before(jiffies
, timeout
)) {
537 interrupt
= this->read_word(this->base
+ ONENAND_REG_INTERRUPT
);
539 if (interrupt
& flags
)
542 if (state
!= FL_READING
&& state
!= FL_PREPARING_ERASE
)
545 /* To get correct interrupt status in timeout case */
546 interrupt
= this->read_word(this->base
+ ONENAND_REG_INTERRUPT
);
548 ctrl
= this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
);
551 * In the Spec. it checks the controller status first
552 * However if you get the correct information in case of
553 * power off recovery (POR) test, it should read ECC status first
555 if (interrupt
& ONENAND_INT_READ
) {
556 int ecc
= onenand_read_ecc(this);
558 if (ecc
& ONENAND_ECC_2BIT_ALL
) {
559 printk(KERN_ERR
"%s: ECC error = 0x%04x\n",
561 mtd
->ecc_stats
.failed
++;
563 } else if (ecc
& ONENAND_ECC_1BIT_ALL
) {
564 printk(KERN_DEBUG
"%s: correctable ECC error = 0x%04x\n",
566 mtd
->ecc_stats
.corrected
++;
569 } else if (state
== FL_READING
) {
570 printk(KERN_ERR
"%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
571 __func__
, ctrl
, interrupt
);
575 if (state
== FL_PREPARING_ERASE
&& !(interrupt
& ONENAND_INT_ERASE
)) {
576 printk(KERN_ERR
"%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n",
577 __func__
, ctrl
, interrupt
);
581 if (!(interrupt
& ONENAND_INT_MASTER
)) {
582 printk(KERN_ERR
"%s: timeout! ctrl=0x%04x intr=0x%04x\n",
583 __func__
, ctrl
, interrupt
);
587 /* If there's controller error, it's a real error */
588 if (ctrl
& ONENAND_CTRL_ERROR
) {
589 printk(KERN_ERR
"%s: controller error = 0x%04x\n",
591 if (ctrl
& ONENAND_CTRL_LOCK
)
592 printk(KERN_ERR
"%s: it's locked error.\n", __func__
);
600 * onenand_interrupt - [DEFAULT] onenand interrupt handler
601 * @param irq onenand interrupt number
602 * @param dev_id interrupt data
606 static irqreturn_t
onenand_interrupt(int irq
, void *data
)
608 struct onenand_chip
*this = data
;
610 /* To handle shared interrupt */
611 if (!this->complete
.done
)
612 complete(&this->complete
);
618 * onenand_interrupt_wait - [DEFAULT] wait until the command is done
619 * @param mtd MTD device structure
620 * @param state state to select the max. timeout value
622 * Wait for command done.
624 static int onenand_interrupt_wait(struct mtd_info
*mtd
, int state
)
626 struct onenand_chip
*this = mtd
->priv
;
628 wait_for_completion(&this->complete
);
630 return onenand_wait(mtd
, state
);
634 * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
635 * @param mtd MTD device structure
636 * @param state state to select the max. timeout value
638 * Try interrupt based wait (It is used one-time)
640 static int onenand_try_interrupt_wait(struct mtd_info
*mtd
, int state
)
642 struct onenand_chip
*this = mtd
->priv
;
643 unsigned long remain
, timeout
;
645 /* We use interrupt wait first */
646 this->wait
= onenand_interrupt_wait
;
648 timeout
= msecs_to_jiffies(100);
649 remain
= wait_for_completion_timeout(&this->complete
, timeout
);
651 printk(KERN_INFO
"OneNAND: There's no interrupt. "
652 "We use the normal wait\n");
654 /* Release the irq */
655 free_irq(this->irq
, this);
657 this->wait
= onenand_wait
;
660 return onenand_wait(mtd
, state
);
664 * onenand_setup_wait - [OneNAND Interface] setup onenand wait method
665 * @param mtd MTD device structure
667 * There's two method to wait onenand work
668 * 1. polling - read interrupt status register
669 * 2. interrupt - use the kernel interrupt method
671 static void onenand_setup_wait(struct mtd_info
*mtd
)
673 struct onenand_chip
*this = mtd
->priv
;
676 init_completion(&this->complete
);
678 if (this->irq
<= 0) {
679 this->wait
= onenand_wait
;
683 if (request_irq(this->irq
, &onenand_interrupt
,
684 IRQF_SHARED
, "onenand", this)) {
685 /* If we can't get irq, use the normal wait */
686 this->wait
= onenand_wait
;
690 /* Enable interrupt */
691 syscfg
= this->read_word(this->base
+ ONENAND_REG_SYS_CFG1
);
692 syscfg
|= ONENAND_SYS_CFG1_IOBE
;
693 this->write_word(syscfg
, this->base
+ ONENAND_REG_SYS_CFG1
);
695 this->wait
= onenand_try_interrupt_wait
;
699 * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
700 * @param mtd MTD data structure
701 * @param area BufferRAM area
702 * @return offset given area
704 * Return BufferRAM offset given area
706 static inline int onenand_bufferram_offset(struct mtd_info
*mtd
, int area
)
708 struct onenand_chip
*this = mtd
->priv
;
710 if (ONENAND_CURRENT_BUFFERRAM(this)) {
711 /* Note: the 'this->writesize' is a real page size */
712 if (area
== ONENAND_DATARAM
)
713 return this->writesize
;
714 if (area
== ONENAND_SPARERAM
)
722 * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
723 * @param mtd MTD data structure
724 * @param area BufferRAM area
725 * @param buffer the databuffer to put/get data
726 * @param offset offset to read from or write to
727 * @param count number of bytes to read/write
729 * Read the BufferRAM area
731 static int onenand_read_bufferram(struct mtd_info
*mtd
, int area
,
732 unsigned char *buffer
, int offset
, size_t count
)
734 struct onenand_chip
*this = mtd
->priv
;
735 void __iomem
*bufferram
;
737 bufferram
= this->base
+ area
;
739 bufferram
+= onenand_bufferram_offset(mtd
, area
);
741 if (ONENAND_CHECK_BYTE_ACCESS(count
)) {
744 /* Align with word(16-bit) size */
747 /* Read word and save byte */
748 word
= this->read_word(bufferram
+ offset
+ count
);
749 buffer
[count
] = (word
& 0xff);
752 memcpy(buffer
, bufferram
+ offset
, count
);
758 * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
759 * @param mtd MTD data structure
760 * @param area BufferRAM area
761 * @param buffer the databuffer to put/get data
762 * @param offset offset to read from or write to
763 * @param count number of bytes to read/write
765 * Read the BufferRAM area with Sync. Burst Mode
767 static int onenand_sync_read_bufferram(struct mtd_info
*mtd
, int area
,
768 unsigned char *buffer
, int offset
, size_t count
)
770 struct onenand_chip
*this = mtd
->priv
;
771 void __iomem
*bufferram
;
773 bufferram
= this->base
+ area
;
775 bufferram
+= onenand_bufferram_offset(mtd
, area
);
777 this->mmcontrol(mtd
, ONENAND_SYS_CFG1_SYNC_READ
);
779 if (ONENAND_CHECK_BYTE_ACCESS(count
)) {
782 /* Align with word(16-bit) size */
785 /* Read word and save byte */
786 word
= this->read_word(bufferram
+ offset
+ count
);
787 buffer
[count
] = (word
& 0xff);
790 memcpy(buffer
, bufferram
+ offset
, count
);
792 this->mmcontrol(mtd
, 0);
798 * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
799 * @param mtd MTD data structure
800 * @param area BufferRAM area
801 * @param buffer the databuffer to put/get data
802 * @param offset offset to read from or write to
803 * @param count number of bytes to read/write
805 * Write the BufferRAM area
807 static int onenand_write_bufferram(struct mtd_info
*mtd
, int area
,
808 const unsigned char *buffer
, int offset
, size_t count
)
810 struct onenand_chip
*this = mtd
->priv
;
811 void __iomem
*bufferram
;
813 bufferram
= this->base
+ area
;
815 bufferram
+= onenand_bufferram_offset(mtd
, area
);
817 if (ONENAND_CHECK_BYTE_ACCESS(count
)) {
821 /* Align with word(16-bit) size */
824 /* Calculate byte access offset */
825 byte_offset
= offset
+ count
;
827 /* Read word and save byte */
828 word
= this->read_word(bufferram
+ byte_offset
);
829 word
= (word
& ~0xff) | buffer
[count
];
830 this->write_word(word
, bufferram
+ byte_offset
);
833 memcpy(bufferram
+ offset
, buffer
, count
);
839 * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
840 * @param mtd MTD data structure
841 * @param addr address to check
842 * @return blockpage address
844 * Get blockpage address at 2x program mode
846 static int onenand_get_2x_blockpage(struct mtd_info
*mtd
, loff_t addr
)
848 struct onenand_chip
*this = mtd
->priv
;
849 int blockpage
, block
, page
;
851 /* Calculate the even block number */
852 block
= (int) (addr
>> this->erase_shift
) & ~1;
853 /* Is it the odd plane? */
854 if (addr
& this->writesize
)
856 page
= (int) (addr
>> (this->page_shift
+ 1)) & this->page_mask
;
857 blockpage
= (block
<< 7) | page
;
863 * onenand_check_bufferram - [GENERIC] Check BufferRAM information
864 * @param mtd MTD data structure
865 * @param addr address to check
866 * @return 1 if there are valid data, otherwise 0
868 * Check bufferram if there is data we required
870 static int onenand_check_bufferram(struct mtd_info
*mtd
, loff_t addr
)
872 struct onenand_chip
*this = mtd
->priv
;
873 int blockpage
, found
= 0;
876 if (ONENAND_IS_2PLANE(this))
877 blockpage
= onenand_get_2x_blockpage(mtd
, addr
);
879 blockpage
= (int) (addr
>> this->page_shift
);
881 /* Is there valid data? */
882 i
= ONENAND_CURRENT_BUFFERRAM(this);
883 if (this->bufferram
[i
].blockpage
== blockpage
)
886 /* Check another BufferRAM */
887 i
= ONENAND_NEXT_BUFFERRAM(this);
888 if (this->bufferram
[i
].blockpage
== blockpage
) {
889 ONENAND_SET_NEXT_BUFFERRAM(this);
894 if (found
&& ONENAND_IS_DDP(this)) {
895 /* Select DataRAM for DDP */
896 int block
= onenand_block(this, addr
);
897 int value
= onenand_bufferram_address(this, block
);
898 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS2
);
905 * onenand_update_bufferram - [GENERIC] Update BufferRAM information
906 * @param mtd MTD data structure
907 * @param addr address to update
908 * @param valid valid flag
910 * Update BufferRAM information
912 static void onenand_update_bufferram(struct mtd_info
*mtd
, loff_t addr
,
915 struct onenand_chip
*this = mtd
->priv
;
919 if (ONENAND_IS_2PLANE(this))
920 blockpage
= onenand_get_2x_blockpage(mtd
, addr
);
922 blockpage
= (int) (addr
>> this->page_shift
);
924 /* Invalidate another BufferRAM */
925 i
= ONENAND_NEXT_BUFFERRAM(this);
926 if (this->bufferram
[i
].blockpage
== blockpage
)
927 this->bufferram
[i
].blockpage
= -1;
929 /* Update BufferRAM */
930 i
= ONENAND_CURRENT_BUFFERRAM(this);
932 this->bufferram
[i
].blockpage
= blockpage
;
934 this->bufferram
[i
].blockpage
= -1;
938 * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
939 * @param mtd MTD data structure
940 * @param addr start address to invalidate
941 * @param len length to invalidate
943 * Invalidate BufferRAM information
945 static void onenand_invalidate_bufferram(struct mtd_info
*mtd
, loff_t addr
,
948 struct onenand_chip
*this = mtd
->priv
;
950 loff_t end_addr
= addr
+ len
;
952 /* Invalidate BufferRAM */
953 for (i
= 0; i
< MAX_BUFFERRAM
; i
++) {
954 loff_t buf_addr
= this->bufferram
[i
].blockpage
<< this->page_shift
;
955 if (buf_addr
>= addr
&& buf_addr
< end_addr
)
956 this->bufferram
[i
].blockpage
= -1;
961 * onenand_get_device - [GENERIC] Get chip for selected access
962 * @param mtd MTD device structure
963 * @param new_state the state which is requested
965 * Get the device and lock it for exclusive access
967 static int onenand_get_device(struct mtd_info
*mtd
, int new_state
)
969 struct onenand_chip
*this = mtd
->priv
;
970 DECLARE_WAITQUEUE(wait
, current
);
973 * Grab the lock and see if the device is available
976 spin_lock(&this->chip_lock
);
977 if (this->state
== FL_READY
) {
978 this->state
= new_state
;
979 spin_unlock(&this->chip_lock
);
980 if (new_state
!= FL_PM_SUSPENDED
&& this->enable
)
984 if (new_state
== FL_PM_SUSPENDED
) {
985 spin_unlock(&this->chip_lock
);
986 return (this->state
== FL_PM_SUSPENDED
) ? 0 : -EAGAIN
;
988 set_current_state(TASK_UNINTERRUPTIBLE
);
989 add_wait_queue(&this->wq
, &wait
);
990 spin_unlock(&this->chip_lock
);
992 remove_wait_queue(&this->wq
, &wait
);
999 * onenand_release_device - [GENERIC] release chip
1000 * @param mtd MTD device structure
1002 * Deselect, release chip lock and wake up anyone waiting on the device
1004 static void onenand_release_device(struct mtd_info
*mtd
)
1006 struct onenand_chip
*this = mtd
->priv
;
1008 if (this->state
!= FL_PM_SUSPENDED
&& this->disable
)
1010 /* Release the chip */
1011 spin_lock(&this->chip_lock
);
1012 this->state
= FL_READY
;
1014 spin_unlock(&this->chip_lock
);
1018 * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
1019 * @param mtd MTD device structure
1020 * @param buf destination address
1021 * @param column oob offset to read from
1022 * @param thislen oob length to read
1024 static int onenand_transfer_auto_oob(struct mtd_info
*mtd
, uint8_t *buf
, int column
,
1027 struct onenand_chip
*this = mtd
->priv
;
1028 struct nand_oobfree
*free
;
1029 int readcol
= column
;
1030 int readend
= column
+ thislen
;
1033 uint8_t *oob_buf
= this->oob_buf
;
1035 free
= this->ecclayout
->oobfree
;
1036 for (i
= 0; i
< MTD_MAX_OOBFREE_ENTRIES
&& free
->length
; i
++, free
++) {
1037 if (readcol
>= lastgap
)
1038 readcol
+= free
->offset
- lastgap
;
1039 if (readend
>= lastgap
)
1040 readend
+= free
->offset
- lastgap
;
1041 lastgap
= free
->offset
+ free
->length
;
1043 this->read_bufferram(mtd
, ONENAND_SPARERAM
, oob_buf
, 0, mtd
->oobsize
);
1044 free
= this->ecclayout
->oobfree
;
1045 for (i
= 0; i
< MTD_MAX_OOBFREE_ENTRIES
&& free
->length
; i
++, free
++) {
1046 int free_end
= free
->offset
+ free
->length
;
1047 if (free
->offset
< readend
&& free_end
> readcol
) {
1048 int st
= max_t(int,free
->offset
,readcol
);
1049 int ed
= min_t(int,free_end
,readend
);
1051 memcpy(buf
, oob_buf
+ st
, n
);
1053 } else if (column
== 0)
1060 * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
1061 * @param mtd MTD device structure
1062 * @param addr address to recover
1063 * @param status return value from onenand_wait / onenand_bbt_wait
1065 * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
1066 * lower page address and MSB page has higher page address in paired pages.
1067 * If power off occurs during MSB page program, the paired LSB page data can
1068 * become corrupt. LSB page recovery read is a way to read LSB page though page
1069 * data are corrupted. When uncorrectable error occurs as a result of LSB page
1070 * read after power up, issue LSB page recovery read.
1072 static int onenand_recover_lsb(struct mtd_info
*mtd
, loff_t addr
, int status
)
1074 struct onenand_chip
*this = mtd
->priv
;
1077 /* Recovery is only for Flex-OneNAND */
1078 if (!FLEXONENAND(this))
1081 /* check if we failed due to uncorrectable error */
1082 if (!mtd_is_eccerr(status
) && status
!= ONENAND_BBT_READ_ECC_ERROR
)
1085 /* check if address lies in MLC region */
1086 i
= flexonenand_region(mtd
, addr
);
1087 if (mtd
->eraseregions
[i
].erasesize
< (1 << this->erase_shift
))
1090 /* We are attempting to reread, so decrement stats.failed
1091 * which was incremented by onenand_wait due to read failure
1093 printk(KERN_INFO
"%s: Attempting to recover from uncorrectable read\n",
1095 mtd
->ecc_stats
.failed
--;
1097 /* Issue the LSB page recovery command */
1098 this->command(mtd
, FLEXONENAND_CMD_RECOVER_LSB
, addr
, this->writesize
);
1099 return this->wait(mtd
, FL_READING
);
1103 * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
1104 * @param mtd MTD device structure
1105 * @param from offset to read from
1106 * @param ops: oob operation description structure
1108 * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
1109 * So, read-while-load is not present.
1111 static int onenand_mlc_read_ops_nolock(struct mtd_info
*mtd
, loff_t from
,
1112 struct mtd_oob_ops
*ops
)
1114 struct onenand_chip
*this = mtd
->priv
;
1115 struct mtd_ecc_stats stats
;
1116 size_t len
= ops
->len
;
1117 size_t ooblen
= ops
->ooblen
;
1118 u_char
*buf
= ops
->datbuf
;
1119 u_char
*oobbuf
= ops
->oobbuf
;
1120 int read
= 0, column
, thislen
;
1121 int oobread
= 0, oobcolumn
, thisooblen
, oobsize
;
1123 int writesize
= this->writesize
;
1125 pr_debug("%s: from = 0x%08x, len = %i\n", __func__
, (unsigned int)from
,
1128 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1129 oobsize
= this->ecclayout
->oobavail
;
1131 oobsize
= mtd
->oobsize
;
1133 oobcolumn
= from
& (mtd
->oobsize
- 1);
1135 /* Do not allow reads past end of device */
1136 if (from
+ len
> mtd
->size
) {
1137 printk(KERN_ERR
"%s: Attempt read beyond end of device\n",
1144 stats
= mtd
->ecc_stats
;
1146 while (read
< len
) {
1149 thislen
= min_t(int, writesize
, len
- read
);
1151 column
= from
& (writesize
- 1);
1152 if (column
+ thislen
> writesize
)
1153 thislen
= writesize
- column
;
1155 if (!onenand_check_bufferram(mtd
, from
)) {
1156 this->command(mtd
, ONENAND_CMD_READ
, from
, writesize
);
1158 ret
= this->wait(mtd
, FL_READING
);
1160 ret
= onenand_recover_lsb(mtd
, from
, ret
);
1161 onenand_update_bufferram(mtd
, from
, !ret
);
1162 if (mtd_is_eccerr(ret
))
1168 this->read_bufferram(mtd
, ONENAND_DATARAM
, buf
, column
, thislen
);
1170 thisooblen
= oobsize
- oobcolumn
;
1171 thisooblen
= min_t(int, thisooblen
, ooblen
- oobread
);
1173 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1174 onenand_transfer_auto_oob(mtd
, oobbuf
, oobcolumn
, thisooblen
);
1176 this->read_bufferram(mtd
, ONENAND_SPARERAM
, oobbuf
, oobcolumn
, thisooblen
);
1177 oobread
+= thisooblen
;
1178 oobbuf
+= thisooblen
;
1191 * Return success, if no ECC failures, else -EBADMSG
1192 * fs driver will take care of that, because
1193 * retlen == desired len and result == -EBADMSG
1196 ops
->oobretlen
= oobread
;
1201 if (mtd
->ecc_stats
.failed
- stats
.failed
)
1204 return mtd
->ecc_stats
.corrected
- stats
.corrected
? -EUCLEAN
: 0;
1208 * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
1209 * @param mtd MTD device structure
1210 * @param from offset to read from
1211 * @param ops: oob operation description structure
1213 * OneNAND read main and/or out-of-band data
1215 static int onenand_read_ops_nolock(struct mtd_info
*mtd
, loff_t from
,
1216 struct mtd_oob_ops
*ops
)
1218 struct onenand_chip
*this = mtd
->priv
;
1219 struct mtd_ecc_stats stats
;
1220 size_t len
= ops
->len
;
1221 size_t ooblen
= ops
->ooblen
;
1222 u_char
*buf
= ops
->datbuf
;
1223 u_char
*oobbuf
= ops
->oobbuf
;
1224 int read
= 0, column
, thislen
;
1225 int oobread
= 0, oobcolumn
, thisooblen
, oobsize
;
1226 int ret
= 0, boundary
= 0;
1227 int writesize
= this->writesize
;
1229 pr_debug("%s: from = 0x%08x, len = %i\n", __func__
, (unsigned int)from
,
1232 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1233 oobsize
= this->ecclayout
->oobavail
;
1235 oobsize
= mtd
->oobsize
;
1237 oobcolumn
= from
& (mtd
->oobsize
- 1);
1239 /* Do not allow reads past end of device */
1240 if ((from
+ len
) > mtd
->size
) {
1241 printk(KERN_ERR
"%s: Attempt read beyond end of device\n",
1248 stats
= mtd
->ecc_stats
;
1250 /* Read-while-load method */
1252 /* Do first load to bufferRAM */
1254 if (!onenand_check_bufferram(mtd
, from
)) {
1255 this->command(mtd
, ONENAND_CMD_READ
, from
, writesize
);
1256 ret
= this->wait(mtd
, FL_READING
);
1257 onenand_update_bufferram(mtd
, from
, !ret
);
1258 if (mtd_is_eccerr(ret
))
1263 thislen
= min_t(int, writesize
, len
- read
);
1264 column
= from
& (writesize
- 1);
1265 if (column
+ thislen
> writesize
)
1266 thislen
= writesize
- column
;
1269 /* If there is more to load then start next load */
1271 if (read
+ thislen
< len
) {
1272 this->command(mtd
, ONENAND_CMD_READ
, from
, writesize
);
1274 * Chip boundary handling in DDP
1275 * Now we issued chip 1 read and pointed chip 1
1276 * bufferram so we have to point chip 0 bufferram.
1278 if (ONENAND_IS_DDP(this) &&
1279 unlikely(from
== (this->chipsize
>> 1))) {
1280 this->write_word(ONENAND_DDP_CHIP0
, this->base
+ ONENAND_REG_START_ADDRESS2
);
1284 ONENAND_SET_PREV_BUFFERRAM(this);
1286 /* While load is going, read from last bufferRAM */
1287 this->read_bufferram(mtd
, ONENAND_DATARAM
, buf
, column
, thislen
);
1289 /* Read oob area if needed */
1291 thisooblen
= oobsize
- oobcolumn
;
1292 thisooblen
= min_t(int, thisooblen
, ooblen
- oobread
);
1294 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1295 onenand_transfer_auto_oob(mtd
, oobbuf
, oobcolumn
, thisooblen
);
1297 this->read_bufferram(mtd
, ONENAND_SPARERAM
, oobbuf
, oobcolumn
, thisooblen
);
1298 oobread
+= thisooblen
;
1299 oobbuf
+= thisooblen
;
1303 /* See if we are done */
1307 /* Set up for next read from bufferRAM */
1308 if (unlikely(boundary
))
1309 this->write_word(ONENAND_DDP_CHIP1
, this->base
+ ONENAND_REG_START_ADDRESS2
);
1310 ONENAND_SET_NEXT_BUFFERRAM(this);
1312 thislen
= min_t(int, writesize
, len
- read
);
1315 /* Now wait for load */
1316 ret
= this->wait(mtd
, FL_READING
);
1317 onenand_update_bufferram(mtd
, from
, !ret
);
1318 if (mtd_is_eccerr(ret
))
1323 * Return success, if no ECC failures, else -EBADMSG
1324 * fs driver will take care of that, because
1325 * retlen == desired len and result == -EBADMSG
1328 ops
->oobretlen
= oobread
;
1333 if (mtd
->ecc_stats
.failed
- stats
.failed
)
1336 return mtd
->ecc_stats
.corrected
- stats
.corrected
? -EUCLEAN
: 0;
1340 * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
1341 * @param mtd MTD device structure
1342 * @param from offset to read from
1343 * @param ops: oob operation description structure
1345 * OneNAND read out-of-band data from the spare area
1347 static int onenand_read_oob_nolock(struct mtd_info
*mtd
, loff_t from
,
1348 struct mtd_oob_ops
*ops
)
1350 struct onenand_chip
*this = mtd
->priv
;
1351 struct mtd_ecc_stats stats
;
1352 int read
= 0, thislen
, column
, oobsize
;
1353 size_t len
= ops
->ooblen
;
1354 unsigned int mode
= ops
->mode
;
1355 u_char
*buf
= ops
->oobbuf
;
1356 int ret
= 0, readcmd
;
1358 from
+= ops
->ooboffs
;
1360 pr_debug("%s: from = 0x%08x, len = %i\n", __func__
, (unsigned int)from
,
1363 /* Initialize return length value */
1366 if (mode
== MTD_OPS_AUTO_OOB
)
1367 oobsize
= this->ecclayout
->oobavail
;
1369 oobsize
= mtd
->oobsize
;
1371 column
= from
& (mtd
->oobsize
- 1);
1373 if (unlikely(column
>= oobsize
)) {
1374 printk(KERN_ERR
"%s: Attempted to start read outside oob\n",
1379 /* Do not allow reads past end of device */
1380 if (unlikely(from
>= mtd
->size
||
1381 column
+ len
> ((mtd
->size
>> this->page_shift
) -
1382 (from
>> this->page_shift
)) * oobsize
)) {
1383 printk(KERN_ERR
"%s: Attempted to read beyond end of device\n",
1388 stats
= mtd
->ecc_stats
;
1390 readcmd
= ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ
: ONENAND_CMD_READOOB
;
1392 while (read
< len
) {
1395 thislen
= oobsize
- column
;
1396 thislen
= min_t(int, thislen
, len
);
1398 this->command(mtd
, readcmd
, from
, mtd
->oobsize
);
1400 onenand_update_bufferram(mtd
, from
, 0);
1402 ret
= this->wait(mtd
, FL_READING
);
1404 ret
= onenand_recover_lsb(mtd
, from
, ret
);
1406 if (ret
&& !mtd_is_eccerr(ret
)) {
1407 printk(KERN_ERR
"%s: read failed = 0x%x\n",
1412 if (mode
== MTD_OPS_AUTO_OOB
)
1413 onenand_transfer_auto_oob(mtd
, buf
, column
, thislen
);
1415 this->read_bufferram(mtd
, ONENAND_SPARERAM
, buf
, column
, thislen
);
1427 from
+= mtd
->writesize
;
1432 ops
->oobretlen
= read
;
1437 if (mtd
->ecc_stats
.failed
- stats
.failed
)
1444 * onenand_read - [MTD Interface] Read data from flash
1445 * @param mtd MTD device structure
1446 * @param from offset to read from
1447 * @param len number of bytes to read
1448 * @param retlen pointer to variable to store the number of read bytes
1449 * @param buf the databuffer to put data
1453 static int onenand_read(struct mtd_info
*mtd
, loff_t from
, size_t len
,
1454 size_t *retlen
, u_char
*buf
)
1456 struct onenand_chip
*this = mtd
->priv
;
1457 struct mtd_oob_ops ops
= {
1465 onenand_get_device(mtd
, FL_READING
);
1466 ret
= ONENAND_IS_4KB_PAGE(this) ?
1467 onenand_mlc_read_ops_nolock(mtd
, from
, &ops
) :
1468 onenand_read_ops_nolock(mtd
, from
, &ops
);
1469 onenand_release_device(mtd
);
1471 *retlen
= ops
.retlen
;
1476 * onenand_read_oob - [MTD Interface] Read main and/or out-of-band
1477 * @param mtd: MTD device structure
1478 * @param from: offset to read from
1479 * @param ops: oob operation description structure
1481 * Read main and/or out-of-band
1483 static int onenand_read_oob(struct mtd_info
*mtd
, loff_t from
,
1484 struct mtd_oob_ops
*ops
)
1486 struct onenand_chip
*this = mtd
->priv
;
1489 switch (ops
->mode
) {
1490 case MTD_OPS_PLACE_OOB
:
1491 case MTD_OPS_AUTO_OOB
:
1494 /* Not implemented yet */
1499 onenand_get_device(mtd
, FL_READING
);
1501 ret
= ONENAND_IS_4KB_PAGE(this) ?
1502 onenand_mlc_read_ops_nolock(mtd
, from
, ops
) :
1503 onenand_read_ops_nolock(mtd
, from
, ops
);
1505 ret
= onenand_read_oob_nolock(mtd
, from
, ops
);
1506 onenand_release_device(mtd
);
1512 * onenand_bbt_wait - [DEFAULT] wait until the command is done
1513 * @param mtd MTD device structure
1514 * @param state state to select the max. timeout value
1516 * Wait for command done.
1518 static int onenand_bbt_wait(struct mtd_info
*mtd
, int state
)
1520 struct onenand_chip
*this = mtd
->priv
;
1521 unsigned long timeout
;
1522 unsigned int interrupt
, ctrl
, ecc
, addr1
, addr8
;
1524 /* The 20 msec is enough */
1525 timeout
= jiffies
+ msecs_to_jiffies(20);
1526 while (time_before(jiffies
, timeout
)) {
1527 interrupt
= this->read_word(this->base
+ ONENAND_REG_INTERRUPT
);
1528 if (interrupt
& ONENAND_INT_MASTER
)
1531 /* To get correct interrupt status in timeout case */
1532 interrupt
= this->read_word(this->base
+ ONENAND_REG_INTERRUPT
);
1533 ctrl
= this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
);
1534 addr1
= this->read_word(this->base
+ ONENAND_REG_START_ADDRESS1
);
1535 addr8
= this->read_word(this->base
+ ONENAND_REG_START_ADDRESS8
);
1537 if (interrupt
& ONENAND_INT_READ
) {
1538 ecc
= onenand_read_ecc(this);
1539 if (ecc
& ONENAND_ECC_2BIT_ALL
) {
1540 printk(KERN_DEBUG
"%s: ecc 0x%04x ctrl 0x%04x "
1541 "intr 0x%04x addr1 %#x addr8 %#x\n",
1542 __func__
, ecc
, ctrl
, interrupt
, addr1
, addr8
);
1543 return ONENAND_BBT_READ_ECC_ERROR
;
1546 printk(KERN_ERR
"%s: read timeout! ctrl 0x%04x "
1547 "intr 0x%04x addr1 %#x addr8 %#x\n",
1548 __func__
, ctrl
, interrupt
, addr1
, addr8
);
1549 return ONENAND_BBT_READ_FATAL_ERROR
;
1552 /* Initial bad block case: 0x2400 or 0x0400 */
1553 if (ctrl
& ONENAND_CTRL_ERROR
) {
1554 printk(KERN_DEBUG
"%s: ctrl 0x%04x intr 0x%04x addr1 %#x "
1555 "addr8 %#x\n", __func__
, ctrl
, interrupt
, addr1
, addr8
);
1556 return ONENAND_BBT_READ_ERROR
;
1563 * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
1564 * @param mtd MTD device structure
1565 * @param from offset to read from
1566 * @param ops oob operation description structure
1568 * OneNAND read out-of-band data from the spare area for bbt scan
1570 int onenand_bbt_read_oob(struct mtd_info
*mtd
, loff_t from
,
1571 struct mtd_oob_ops
*ops
)
1573 struct onenand_chip
*this = mtd
->priv
;
1574 int read
= 0, thislen
, column
;
1575 int ret
= 0, readcmd
;
1576 size_t len
= ops
->ooblen
;
1577 u_char
*buf
= ops
->oobbuf
;
1579 pr_debug("%s: from = 0x%08x, len = %zi\n", __func__
, (unsigned int)from
,
1582 /* Initialize return value */
1585 /* Do not allow reads past end of device */
1586 if (unlikely((from
+ len
) > mtd
->size
)) {
1587 printk(KERN_ERR
"%s: Attempt read beyond end of device\n",
1589 return ONENAND_BBT_READ_FATAL_ERROR
;
1592 /* Grab the lock and see if the device is available */
1593 onenand_get_device(mtd
, FL_READING
);
1595 column
= from
& (mtd
->oobsize
- 1);
1597 readcmd
= ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ
: ONENAND_CMD_READOOB
;
1599 while (read
< len
) {
1602 thislen
= mtd
->oobsize
- column
;
1603 thislen
= min_t(int, thislen
, len
);
1605 this->command(mtd
, readcmd
, from
, mtd
->oobsize
);
1607 onenand_update_bufferram(mtd
, from
, 0);
1609 ret
= this->bbt_wait(mtd
, FL_READING
);
1611 ret
= onenand_recover_lsb(mtd
, from
, ret
);
1616 this->read_bufferram(mtd
, ONENAND_SPARERAM
, buf
, column
, thislen
);
1625 /* Update Page size */
1626 from
+= this->writesize
;
1631 /* Deselect and wake up anyone waiting on the device */
1632 onenand_release_device(mtd
);
1634 ops
->oobretlen
= read
;
1638 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
1640 * onenand_verify_oob - [GENERIC] verify the oob contents after a write
1641 * @param mtd MTD device structure
1642 * @param buf the databuffer to verify
1643 * @param to offset to read from
1645 static int onenand_verify_oob(struct mtd_info
*mtd
, const u_char
*buf
, loff_t to
)
1647 struct onenand_chip
*this = mtd
->priv
;
1648 u_char
*oob_buf
= this->oob_buf
;
1649 int status
, i
, readcmd
;
1651 readcmd
= ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ
: ONENAND_CMD_READOOB
;
1653 this->command(mtd
, readcmd
, to
, mtd
->oobsize
);
1654 onenand_update_bufferram(mtd
, to
, 0);
1655 status
= this->wait(mtd
, FL_READING
);
1659 this->read_bufferram(mtd
, ONENAND_SPARERAM
, oob_buf
, 0, mtd
->oobsize
);
1660 for (i
= 0; i
< mtd
->oobsize
; i
++)
1661 if (buf
[i
] != 0xFF && buf
[i
] != oob_buf
[i
])
1668 * onenand_verify - [GENERIC] verify the chip contents after a write
1669 * @param mtd MTD device structure
1670 * @param buf the databuffer to verify
1671 * @param addr offset to read from
1672 * @param len number of bytes to read and compare
1674 static int onenand_verify(struct mtd_info
*mtd
, const u_char
*buf
, loff_t addr
, size_t len
)
1676 struct onenand_chip
*this = mtd
->priv
;
1678 int thislen
, column
;
1680 column
= addr
& (this->writesize
- 1);
1683 thislen
= min_t(int, this->writesize
- column
, len
);
1685 this->command(mtd
, ONENAND_CMD_READ
, addr
, this->writesize
);
1687 onenand_update_bufferram(mtd
, addr
, 0);
1689 ret
= this->wait(mtd
, FL_READING
);
1693 onenand_update_bufferram(mtd
, addr
, 1);
1695 this->read_bufferram(mtd
, ONENAND_DATARAM
, this->verify_buf
, 0, mtd
->writesize
);
1697 if (memcmp(buf
, this->verify_buf
+ column
, thislen
))
1709 #define onenand_verify(...) (0)
1710 #define onenand_verify_oob(...) (0)
1713 #define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
1715 static void onenand_panic_wait(struct mtd_info
*mtd
)
1717 struct onenand_chip
*this = mtd
->priv
;
1718 unsigned int interrupt
;
1721 for (i
= 0; i
< 2000; i
++) {
1722 interrupt
= this->read_word(this->base
+ ONENAND_REG_INTERRUPT
);
1723 if (interrupt
& ONENAND_INT_MASTER
)
1730 * onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context
1731 * @param mtd MTD device structure
1732 * @param to offset to write to
1733 * @param len number of bytes to write
1734 * @param retlen pointer to variable to store the number of written bytes
1735 * @param buf the data to write
1739 static int onenand_panic_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
1740 size_t *retlen
, const u_char
*buf
)
1742 struct onenand_chip
*this = mtd
->priv
;
1743 int column
, subpage
;
1747 if (this->state
== FL_PM_SUSPENDED
)
1750 /* Wait for any existing operation to clear */
1751 onenand_panic_wait(mtd
);
1753 pr_debug("%s: to = 0x%08x, len = %i\n", __func__
, (unsigned int)to
,
1756 /* Reject writes, which are not page aligned */
1757 if (unlikely(NOTALIGNED(to
) || NOTALIGNED(len
))) {
1758 printk(KERN_ERR
"%s: Attempt to write not page aligned data\n",
1763 column
= to
& (mtd
->writesize
- 1);
1765 /* Loop until all data write */
1766 while (written
< len
) {
1767 int thislen
= min_t(int, mtd
->writesize
- column
, len
- written
);
1768 u_char
*wbuf
= (u_char
*) buf
;
1770 this->command(mtd
, ONENAND_CMD_BUFFERRAM
, to
, thislen
);
1772 /* Partial page write */
1773 subpage
= thislen
< mtd
->writesize
;
1775 memset(this->page_buf
, 0xff, mtd
->writesize
);
1776 memcpy(this->page_buf
+ column
, buf
, thislen
);
1777 wbuf
= this->page_buf
;
1780 this->write_bufferram(mtd
, ONENAND_DATARAM
, wbuf
, 0, mtd
->writesize
);
1781 this->write_bufferram(mtd
, ONENAND_SPARERAM
, ffchars
, 0, mtd
->oobsize
);
1783 this->command(mtd
, ONENAND_CMD_PROG
, to
, mtd
->writesize
);
1785 onenand_panic_wait(mtd
);
1787 /* In partial page write we don't update bufferram */
1788 onenand_update_bufferram(mtd
, to
, !ret
&& !subpage
);
1789 if (ONENAND_IS_2PLANE(this)) {
1790 ONENAND_SET_BUFFERRAM1(this);
1791 onenand_update_bufferram(mtd
, to
+ this->writesize
, !ret
&& !subpage
);
1795 printk(KERN_ERR
"%s: write failed %d\n", __func__
, ret
);
1814 * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
1815 * @param mtd MTD device structure
1816 * @param oob_buf oob buffer
1817 * @param buf source address
1818 * @param column oob offset to write to
1819 * @param thislen oob length to write
1821 static int onenand_fill_auto_oob(struct mtd_info
*mtd
, u_char
*oob_buf
,
1822 const u_char
*buf
, int column
, int thislen
)
1824 struct onenand_chip
*this = mtd
->priv
;
1825 struct nand_oobfree
*free
;
1826 int writecol
= column
;
1827 int writeend
= column
+ thislen
;
1831 free
= this->ecclayout
->oobfree
;
1832 for (i
= 0; i
< MTD_MAX_OOBFREE_ENTRIES
&& free
->length
; i
++, free
++) {
1833 if (writecol
>= lastgap
)
1834 writecol
+= free
->offset
- lastgap
;
1835 if (writeend
>= lastgap
)
1836 writeend
+= free
->offset
- lastgap
;
1837 lastgap
= free
->offset
+ free
->length
;
1839 free
= this->ecclayout
->oobfree
;
1840 for (i
= 0; i
< MTD_MAX_OOBFREE_ENTRIES
&& free
->length
; i
++, free
++) {
1841 int free_end
= free
->offset
+ free
->length
;
1842 if (free
->offset
< writeend
&& free_end
> writecol
) {
1843 int st
= max_t(int,free
->offset
,writecol
);
1844 int ed
= min_t(int,free_end
,writeend
);
1846 memcpy(oob_buf
+ st
, buf
, n
);
1848 } else if (column
== 0)
1855 * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
1856 * @param mtd MTD device structure
1857 * @param to offset to write to
1858 * @param ops oob operation description structure
1860 * Write main and/or oob with ECC
1862 static int onenand_write_ops_nolock(struct mtd_info
*mtd
, loff_t to
,
1863 struct mtd_oob_ops
*ops
)
1865 struct onenand_chip
*this = mtd
->priv
;
1866 int written
= 0, column
, thislen
= 0, subpage
= 0;
1867 int prev
= 0, prevlen
= 0, prev_subpage
= 0, first
= 1;
1868 int oobwritten
= 0, oobcolumn
, thisooblen
, oobsize
;
1869 size_t len
= ops
->len
;
1870 size_t ooblen
= ops
->ooblen
;
1871 const u_char
*buf
= ops
->datbuf
;
1872 const u_char
*oob
= ops
->oobbuf
;
1876 pr_debug("%s: to = 0x%08x, len = %i\n", __func__
, (unsigned int)to
,
1879 /* Initialize retlen, in case of early exit */
1883 /* Reject writes, which are not page aligned */
1884 if (unlikely(NOTALIGNED(to
) || NOTALIGNED(len
))) {
1885 printk(KERN_ERR
"%s: Attempt to write not page aligned data\n",
1890 /* Check zero length */
1894 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1895 oobsize
= this->ecclayout
->oobavail
;
1897 oobsize
= mtd
->oobsize
;
1899 oobcolumn
= to
& (mtd
->oobsize
- 1);
1901 column
= to
& (mtd
->writesize
- 1);
1903 /* Loop until all data write */
1905 if (written
< len
) {
1906 u_char
*wbuf
= (u_char
*) buf
;
1908 thislen
= min_t(int, mtd
->writesize
- column
, len
- written
);
1909 thisooblen
= min_t(int, oobsize
- oobcolumn
, ooblen
- oobwritten
);
1913 this->command(mtd
, ONENAND_CMD_BUFFERRAM
, to
, thislen
);
1915 /* Partial page write */
1916 subpage
= thislen
< mtd
->writesize
;
1918 memset(this->page_buf
, 0xff, mtd
->writesize
);
1919 memcpy(this->page_buf
+ column
, buf
, thislen
);
1920 wbuf
= this->page_buf
;
1923 this->write_bufferram(mtd
, ONENAND_DATARAM
, wbuf
, 0, mtd
->writesize
);
1926 oobbuf
= this->oob_buf
;
1928 /* We send data to spare ram with oobsize
1929 * to prevent byte access */
1930 memset(oobbuf
, 0xff, mtd
->oobsize
);
1931 if (ops
->mode
== MTD_OPS_AUTO_OOB
)
1932 onenand_fill_auto_oob(mtd
, oobbuf
, oob
, oobcolumn
, thisooblen
);
1934 memcpy(oobbuf
+ oobcolumn
, oob
, thisooblen
);
1936 oobwritten
+= thisooblen
;
1940 oobbuf
= (u_char
*) ffchars
;
1942 this->write_bufferram(mtd
, ONENAND_SPARERAM
, oobbuf
, 0, mtd
->oobsize
);
1944 ONENAND_SET_NEXT_BUFFERRAM(this);
1947 * 2 PLANE, MLC, and Flex-OneNAND do not support
1948 * write-while-program feature.
1950 if (!ONENAND_IS_2PLANE(this) && !ONENAND_IS_4KB_PAGE(this) && !first
) {
1951 ONENAND_SET_PREV_BUFFERRAM(this);
1953 ret
= this->wait(mtd
, FL_WRITING
);
1955 /* In partial page write we don't update bufferram */
1956 onenand_update_bufferram(mtd
, prev
, !ret
&& !prev_subpage
);
1959 printk(KERN_ERR
"%s: write failed %d\n",
1964 if (written
== len
) {
1965 /* Only check verify write turn on */
1966 ret
= onenand_verify(mtd
, buf
- len
, to
- len
, len
);
1968 printk(KERN_ERR
"%s: verify failed %d\n",
1973 ONENAND_SET_NEXT_BUFFERRAM(this);
1977 cmd
= ONENAND_CMD_PROG
;
1979 /* Exclude 1st OTP and OTP blocks for cache program feature */
1980 if (ONENAND_IS_CACHE_PROGRAM(this) &&
1981 likely(onenand_block(this, to
) != 0) &&
1982 ONENAND_IS_4KB_PAGE(this) &&
1983 ((written
+ thislen
) < len
)) {
1984 cmd
= ONENAND_CMD_2X_CACHE_PROG
;
1988 this->command(mtd
, cmd
, to
, mtd
->writesize
);
1991 * 2 PLANE, MLC, and Flex-OneNAND wait here
1993 if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) {
1994 ret
= this->wait(mtd
, FL_WRITING
);
1996 /* In partial page write we don't update bufferram */
1997 onenand_update_bufferram(mtd
, to
, !ret
&& !subpage
);
1999 printk(KERN_ERR
"%s: write failed %d\n",
2004 /* Only check verify write turn on */
2005 ret
= onenand_verify(mtd
, buf
, to
, thislen
);
2007 printk(KERN_ERR
"%s: verify failed %d\n",
2021 prev_subpage
= subpage
;
2029 /* In error case, clear all bufferrams */
2031 onenand_invalidate_bufferram(mtd
, 0, -1);
2033 ops
->retlen
= written
;
2034 ops
->oobretlen
= oobwritten
;
2041 * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
2042 * @param mtd MTD device structure
2043 * @param to offset to write to
2044 * @param len number of bytes to write
2045 * @param retlen pointer to variable to store the number of written bytes
2046 * @param buf the data to write
2047 * @param mode operation mode
2049 * OneNAND write out-of-band
2051 static int onenand_write_oob_nolock(struct mtd_info
*mtd
, loff_t to
,
2052 struct mtd_oob_ops
*ops
)
2054 struct onenand_chip
*this = mtd
->priv
;
2055 int column
, ret
= 0, oobsize
;
2056 int written
= 0, oobcmd
;
2058 size_t len
= ops
->ooblen
;
2059 const u_char
*buf
= ops
->oobbuf
;
2060 unsigned int mode
= ops
->mode
;
2064 pr_debug("%s: to = 0x%08x, len = %i\n", __func__
, (unsigned int)to
,
2067 /* Initialize retlen, in case of early exit */
2070 if (mode
== MTD_OPS_AUTO_OOB
)
2071 oobsize
= this->ecclayout
->oobavail
;
2073 oobsize
= mtd
->oobsize
;
2075 column
= to
& (mtd
->oobsize
- 1);
2077 if (unlikely(column
>= oobsize
)) {
2078 printk(KERN_ERR
"%s: Attempted to start write outside oob\n",
2083 /* For compatibility with NAND: Do not allow write past end of page */
2084 if (unlikely(column
+ len
> oobsize
)) {
2085 printk(KERN_ERR
"%s: Attempt to write past end of page\n",
2090 /* Do not allow reads past end of device */
2091 if (unlikely(to
>= mtd
->size
||
2092 column
+ len
> ((mtd
->size
>> this->page_shift
) -
2093 (to
>> this->page_shift
)) * oobsize
)) {
2094 printk(KERN_ERR
"%s: Attempted to write past end of device\n",
2099 oobbuf
= this->oob_buf
;
2101 oobcmd
= ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_PROG
: ONENAND_CMD_PROGOOB
;
2103 /* Loop until all data write */
2104 while (written
< len
) {
2105 int thislen
= min_t(int, oobsize
, len
- written
);
2109 this->command(mtd
, ONENAND_CMD_BUFFERRAM
, to
, mtd
->oobsize
);
2111 /* We send data to spare ram with oobsize
2112 * to prevent byte access */
2113 memset(oobbuf
, 0xff, mtd
->oobsize
);
2114 if (mode
== MTD_OPS_AUTO_OOB
)
2115 onenand_fill_auto_oob(mtd
, oobbuf
, buf
, column
, thislen
);
2117 memcpy(oobbuf
+ column
, buf
, thislen
);
2118 this->write_bufferram(mtd
, ONENAND_SPARERAM
, oobbuf
, 0, mtd
->oobsize
);
2120 if (ONENAND_IS_4KB_PAGE(this)) {
2121 /* Set main area of DataRAM to 0xff*/
2122 memset(this->page_buf
, 0xff, mtd
->writesize
);
2123 this->write_bufferram(mtd
, ONENAND_DATARAM
,
2124 this->page_buf
, 0, mtd
->writesize
);
2127 this->command(mtd
, oobcmd
, to
, mtd
->oobsize
);
2129 onenand_update_bufferram(mtd
, to
, 0);
2130 if (ONENAND_IS_2PLANE(this)) {
2131 ONENAND_SET_BUFFERRAM1(this);
2132 onenand_update_bufferram(mtd
, to
+ this->writesize
, 0);
2135 ret
= this->wait(mtd
, FL_WRITING
);
2137 printk(KERN_ERR
"%s: write failed %d\n", __func__
, ret
);
2141 ret
= onenand_verify_oob(mtd
, oobbuf
, to
);
2143 printk(KERN_ERR
"%s: verify failed %d\n",
2152 to
+= mtd
->writesize
;
2157 ops
->oobretlen
= written
;
2163 * onenand_write - [MTD Interface] write buffer to FLASH
2164 * @param mtd MTD device structure
2165 * @param to offset to write to
2166 * @param len number of bytes to write
2167 * @param retlen pointer to variable to store the number of written bytes
2168 * @param buf the data to write
2172 static int onenand_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
2173 size_t *retlen
, const u_char
*buf
)
2175 struct mtd_oob_ops ops
= {
2178 .datbuf
= (u_char
*) buf
,
2183 onenand_get_device(mtd
, FL_WRITING
);
2184 ret
= onenand_write_ops_nolock(mtd
, to
, &ops
);
2185 onenand_release_device(mtd
);
2187 *retlen
= ops
.retlen
;
2192 * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
2193 * @param mtd: MTD device structure
2194 * @param to: offset to write
2195 * @param ops: oob operation description structure
2197 static int onenand_write_oob(struct mtd_info
*mtd
, loff_t to
,
2198 struct mtd_oob_ops
*ops
)
2202 switch (ops
->mode
) {
2203 case MTD_OPS_PLACE_OOB
:
2204 case MTD_OPS_AUTO_OOB
:
2207 /* Not implemented yet */
2212 onenand_get_device(mtd
, FL_WRITING
);
2214 ret
= onenand_write_ops_nolock(mtd
, to
, ops
);
2216 ret
= onenand_write_oob_nolock(mtd
, to
, ops
);
2217 onenand_release_device(mtd
);
2223 * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
2224 * @param mtd MTD device structure
2225 * @param ofs offset from device start
2226 * @param allowbbt 1, if its allowed to access the bbt area
2228 * Check, if the block is bad. Either by reading the bad block table or
2229 * calling of the scan function.
2231 static int onenand_block_isbad_nolock(struct mtd_info
*mtd
, loff_t ofs
, int allowbbt
)
2233 struct onenand_chip
*this = mtd
->priv
;
2234 struct bbm_info
*bbm
= this->bbm
;
2236 /* Return info from the table */
2237 return bbm
->isbad_bbt(mtd
, ofs
, allowbbt
);
2241 static int onenand_multiblock_erase_verify(struct mtd_info
*mtd
,
2242 struct erase_info
*instr
)
2244 struct onenand_chip
*this = mtd
->priv
;
2245 loff_t addr
= instr
->addr
;
2246 int len
= instr
->len
;
2247 unsigned int block_size
= (1 << this->erase_shift
);
2251 this->command(mtd
, ONENAND_CMD_ERASE_VERIFY
, addr
, block_size
);
2252 ret
= this->wait(mtd
, FL_VERIFYING_ERASE
);
2254 printk(KERN_ERR
"%s: Failed verify, block %d\n",
2255 __func__
, onenand_block(this, addr
));
2256 instr
->state
= MTD_ERASE_FAILED
;
2257 instr
->fail_addr
= addr
;
2267 * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
2268 * @param mtd MTD device structure
2269 * @param instr erase instruction
2270 * @param region erase region
2272 * Erase one or more blocks up to 64 block at a time
2274 static int onenand_multiblock_erase(struct mtd_info
*mtd
,
2275 struct erase_info
*instr
,
2276 unsigned int block_size
)
2278 struct onenand_chip
*this = mtd
->priv
;
2279 loff_t addr
= instr
->addr
;
2280 int len
= instr
->len
;
2285 instr
->state
= MTD_ERASING
;
2287 if (ONENAND_IS_DDP(this)) {
2288 loff_t bdry_addr
= this->chipsize
>> 1;
2289 if (addr
< bdry_addr
&& (addr
+ len
) > bdry_addr
)
2290 bdry_block
= bdry_addr
>> this->erase_shift
;
2295 /* Check if we have a bad block, we do not erase bad blocks */
2296 if (onenand_block_isbad_nolock(mtd
, addr
, 0)) {
2297 printk(KERN_WARNING
"%s: attempt to erase a bad block "
2298 "at addr 0x%012llx\n",
2299 __func__
, (unsigned long long) addr
);
2300 instr
->state
= MTD_ERASE_FAILED
;
2310 /* loop over 64 eb batches */
2312 struct erase_info verify_instr
= *instr
;
2313 int max_eb_count
= MB_ERASE_MAX_BLK_COUNT
;
2315 verify_instr
.addr
= addr
;
2316 verify_instr
.len
= 0;
2318 /* do not cross chip boundary */
2320 int this_block
= (addr
>> this->erase_shift
);
2322 if (this_block
< bdry_block
) {
2323 max_eb_count
= min(max_eb_count
,
2324 (bdry_block
- this_block
));
2330 while (len
> block_size
&& eb_count
< (max_eb_count
- 1)) {
2331 this->command(mtd
, ONENAND_CMD_MULTIBLOCK_ERASE
,
2333 onenand_invalidate_bufferram(mtd
, addr
, block_size
);
2335 ret
= this->wait(mtd
, FL_PREPARING_ERASE
);
2337 printk(KERN_ERR
"%s: Failed multiblock erase, "
2338 "block %d\n", __func__
,
2339 onenand_block(this, addr
));
2340 instr
->state
= MTD_ERASE_FAILED
;
2341 instr
->fail_addr
= MTD_FAIL_ADDR_UNKNOWN
;
2350 /* last block of 64-eb series */
2352 this->command(mtd
, ONENAND_CMD_ERASE
, addr
, block_size
);
2353 onenand_invalidate_bufferram(mtd
, addr
, block_size
);
2355 ret
= this->wait(mtd
, FL_ERASING
);
2356 /* Check if it is write protected */
2358 printk(KERN_ERR
"%s: Failed erase, block %d\n",
2359 __func__
, onenand_block(this, addr
));
2360 instr
->state
= MTD_ERASE_FAILED
;
2361 instr
->fail_addr
= MTD_FAIL_ADDR_UNKNOWN
;
2370 verify_instr
.len
= eb_count
* block_size
;
2371 if (onenand_multiblock_erase_verify(mtd
, &verify_instr
)) {
2372 instr
->state
= verify_instr
.state
;
2373 instr
->fail_addr
= verify_instr
.fail_addr
;
2383 * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
2384 * @param mtd MTD device structure
2385 * @param instr erase instruction
2386 * @param region erase region
2387 * @param block_size erase block size
2389 * Erase one or more blocks one block at a time
2391 static int onenand_block_by_block_erase(struct mtd_info
*mtd
,
2392 struct erase_info
*instr
,
2393 struct mtd_erase_region_info
*region
,
2394 unsigned int block_size
)
2396 struct onenand_chip
*this = mtd
->priv
;
2397 loff_t addr
= instr
->addr
;
2398 int len
= instr
->len
;
2399 loff_t region_end
= 0;
2403 /* region is set for Flex-OneNAND */
2404 region_end
= region
->offset
+ region
->erasesize
* region
->numblocks
;
2407 instr
->state
= MTD_ERASING
;
2409 /* Loop through the blocks */
2413 /* Check if we have a bad block, we do not erase bad blocks */
2414 if (onenand_block_isbad_nolock(mtd
, addr
, 0)) {
2415 printk(KERN_WARNING
"%s: attempt to erase a bad block "
2416 "at addr 0x%012llx\n",
2417 __func__
, (unsigned long long) addr
);
2418 instr
->state
= MTD_ERASE_FAILED
;
2422 this->command(mtd
, ONENAND_CMD_ERASE
, addr
, block_size
);
2424 onenand_invalidate_bufferram(mtd
, addr
, block_size
);
2426 ret
= this->wait(mtd
, FL_ERASING
);
2427 /* Check, if it is write protected */
2429 printk(KERN_ERR
"%s: Failed erase, block %d\n",
2430 __func__
, onenand_block(this, addr
));
2431 instr
->state
= MTD_ERASE_FAILED
;
2432 instr
->fail_addr
= addr
;
2439 if (region
&& addr
== region_end
) {
2444 block_size
= region
->erasesize
;
2445 region_end
= region
->offset
+ region
->erasesize
* region
->numblocks
;
2447 if (len
& (block_size
- 1)) {
2448 /* FIXME: This should be handled at MTD partitioning level. */
2449 printk(KERN_ERR
"%s: Unaligned address\n",
2459 * onenand_erase - [MTD Interface] erase block(s)
2460 * @param mtd MTD device structure
2461 * @param instr erase instruction
2463 * Erase one or more blocks
2465 static int onenand_erase(struct mtd_info
*mtd
, struct erase_info
*instr
)
2467 struct onenand_chip
*this = mtd
->priv
;
2468 unsigned int block_size
;
2469 loff_t addr
= instr
->addr
;
2470 loff_t len
= instr
->len
;
2472 struct mtd_erase_region_info
*region
= NULL
;
2473 loff_t region_offset
= 0;
2475 pr_debug("%s: start=0x%012llx, len=%llu\n", __func__
,
2476 (unsigned long long)instr
->addr
,
2477 (unsigned long long)instr
->len
);
2479 if (FLEXONENAND(this)) {
2480 /* Find the eraseregion of this address */
2481 int i
= flexonenand_region(mtd
, addr
);
2483 region
= &mtd
->eraseregions
[i
];
2484 block_size
= region
->erasesize
;
2486 /* Start address within region must align on block boundary.
2487 * Erase region's start offset is always block start address.
2489 region_offset
= region
->offset
;
2491 block_size
= 1 << this->erase_shift
;
2493 /* Start address must align on block boundary */
2494 if (unlikely((addr
- region_offset
) & (block_size
- 1))) {
2495 printk(KERN_ERR
"%s: Unaligned address\n", __func__
);
2499 /* Length must align on block boundary */
2500 if (unlikely(len
& (block_size
- 1))) {
2501 printk(KERN_ERR
"%s: Length not block aligned\n", __func__
);
2505 /* Grab the lock and see if the device is available */
2506 onenand_get_device(mtd
, FL_ERASING
);
2508 if (ONENAND_IS_4KB_PAGE(this) || region
||
2509 instr
->len
< MB_ERASE_MIN_BLK_COUNT
* block_size
) {
2510 /* region is set for Flex-OneNAND (no mb erase) */
2511 ret
= onenand_block_by_block_erase(mtd
, instr
,
2512 region
, block_size
);
2514 ret
= onenand_multiblock_erase(mtd
, instr
, block_size
);
2517 /* Deselect and wake up anyone waiting on the device */
2518 onenand_release_device(mtd
);
2520 /* Do call back function */
2522 instr
->state
= MTD_ERASE_DONE
;
2523 mtd_erase_callback(instr
);
2530 * onenand_sync - [MTD Interface] sync
2531 * @param mtd MTD device structure
2533 * Sync is actually a wait for chip ready function
2535 static void onenand_sync(struct mtd_info
*mtd
)
2537 pr_debug("%s: called\n", __func__
);
2539 /* Grab the lock and see if the device is available */
2540 onenand_get_device(mtd
, FL_SYNCING
);
2542 /* Release it and go back */
2543 onenand_release_device(mtd
);
2547 * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
2548 * @param mtd MTD device structure
2549 * @param ofs offset relative to mtd start
2551 * Check whether the block is bad
2553 static int onenand_block_isbad(struct mtd_info
*mtd
, loff_t ofs
)
2557 /* Check for invalid offset */
2558 if (ofs
> mtd
->size
)
2561 onenand_get_device(mtd
, FL_READING
);
2562 ret
= onenand_block_isbad_nolock(mtd
, ofs
, 0);
2563 onenand_release_device(mtd
);
2568 * onenand_default_block_markbad - [DEFAULT] mark a block bad
2569 * @param mtd MTD device structure
2570 * @param ofs offset from device start
2572 * This is the default implementation, which can be overridden by
2573 * a hardware specific driver.
2575 static int onenand_default_block_markbad(struct mtd_info
*mtd
, loff_t ofs
)
2577 struct onenand_chip
*this = mtd
->priv
;
2578 struct bbm_info
*bbm
= this->bbm
;
2579 u_char buf
[2] = {0, 0};
2580 struct mtd_oob_ops ops
= {
2581 .mode
= MTD_OPS_PLACE_OOB
,
2588 /* Get block number */
2589 block
= onenand_block(this, ofs
);
2591 bbm
->bbt
[block
>> 2] |= 0x01 << ((block
& 0x03) << 1);
2593 /* We write two bytes, so we don't have to mess with 16-bit access */
2594 ofs
+= mtd
->oobsize
+ (bbm
->badblockpos
& ~0x01);
2595 /* FIXME : What to do when marking SLC block in partition
2596 * with MLC erasesize? For now, it is not advisable to
2597 * create partitions containing both SLC and MLC regions.
2599 return onenand_write_oob_nolock(mtd
, ofs
, &ops
);
2603 * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
2604 * @param mtd MTD device structure
2605 * @param ofs offset relative to mtd start
2607 * Mark the block as bad
2609 static int onenand_block_markbad(struct mtd_info
*mtd
, loff_t ofs
)
2613 ret
= onenand_block_isbad(mtd
, ofs
);
2615 /* If it was bad already, return success and do nothing */
2621 onenand_get_device(mtd
, FL_WRITING
);
2622 ret
= mtd_block_markbad(mtd
, ofs
);
2623 onenand_release_device(mtd
);
2628 * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
2629 * @param mtd MTD device structure
2630 * @param ofs offset relative to mtd start
2631 * @param len number of bytes to lock or unlock
2632 * @param cmd lock or unlock command
2634 * Lock or unlock one or more blocks
2636 static int onenand_do_lock_cmd(struct mtd_info
*mtd
, loff_t ofs
, size_t len
, int cmd
)
2638 struct onenand_chip
*this = mtd
->priv
;
2639 int start
, end
, block
, value
, status
;
2642 start
= onenand_block(this, ofs
);
2643 end
= onenand_block(this, ofs
+ len
) - 1;
2645 if (cmd
== ONENAND_CMD_LOCK
)
2646 wp_status_mask
= ONENAND_WP_LS
;
2648 wp_status_mask
= ONENAND_WP_US
;
2650 /* Continuous lock scheme */
2651 if (this->options
& ONENAND_HAS_CONT_LOCK
) {
2652 /* Set start block address */
2653 this->write_word(start
, this->base
+ ONENAND_REG_START_BLOCK_ADDRESS
);
2654 /* Set end block address */
2655 this->write_word(end
, this->base
+ ONENAND_REG_END_BLOCK_ADDRESS
);
2656 /* Write lock command */
2657 this->command(mtd
, cmd
, 0, 0);
2659 /* There's no return value */
2660 this->wait(mtd
, FL_LOCKING
);
2663 while (this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
)
2664 & ONENAND_CTRL_ONGO
)
2667 /* Check lock status */
2668 status
= this->read_word(this->base
+ ONENAND_REG_WP_STATUS
);
2669 if (!(status
& wp_status_mask
))
2670 printk(KERN_ERR
"%s: wp status = 0x%x\n",
2676 /* Block lock scheme */
2677 for (block
= start
; block
< end
+ 1; block
++) {
2678 /* Set block address */
2679 value
= onenand_block_address(this, block
);
2680 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS1
);
2681 /* Select DataRAM for DDP */
2682 value
= onenand_bufferram_address(this, block
);
2683 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS2
);
2684 /* Set start block address */
2685 this->write_word(block
, this->base
+ ONENAND_REG_START_BLOCK_ADDRESS
);
2686 /* Write lock command */
2687 this->command(mtd
, cmd
, 0, 0);
2689 /* There's no return value */
2690 this->wait(mtd
, FL_LOCKING
);
2693 while (this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
)
2694 & ONENAND_CTRL_ONGO
)
2697 /* Check lock status */
2698 status
= this->read_word(this->base
+ ONENAND_REG_WP_STATUS
);
2699 if (!(status
& wp_status_mask
))
2700 printk(KERN_ERR
"%s: block = %d, wp status = 0x%x\n",
2701 __func__
, block
, status
);
2708 * onenand_lock - [MTD Interface] Lock block(s)
2709 * @param mtd MTD device structure
2710 * @param ofs offset relative to mtd start
2711 * @param len number of bytes to unlock
2713 * Lock one or more blocks
2715 static int onenand_lock(struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
)
2719 onenand_get_device(mtd
, FL_LOCKING
);
2720 ret
= onenand_do_lock_cmd(mtd
, ofs
, len
, ONENAND_CMD_LOCK
);
2721 onenand_release_device(mtd
);
2726 * onenand_unlock - [MTD Interface] Unlock block(s)
2727 * @param mtd MTD device structure
2728 * @param ofs offset relative to mtd start
2729 * @param len number of bytes to unlock
2731 * Unlock one or more blocks
2733 static int onenand_unlock(struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
)
2737 onenand_get_device(mtd
, FL_LOCKING
);
2738 ret
= onenand_do_lock_cmd(mtd
, ofs
, len
, ONENAND_CMD_UNLOCK
);
2739 onenand_release_device(mtd
);
2744 * onenand_check_lock_status - [OneNAND Interface] Check lock status
2745 * @param this onenand chip data structure
2749 static int onenand_check_lock_status(struct onenand_chip
*this)
2751 unsigned int value
, block
, status
;
2754 end
= this->chipsize
>> this->erase_shift
;
2755 for (block
= 0; block
< end
; block
++) {
2756 /* Set block address */
2757 value
= onenand_block_address(this, block
);
2758 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS1
);
2759 /* Select DataRAM for DDP */
2760 value
= onenand_bufferram_address(this, block
);
2761 this->write_word(value
, this->base
+ ONENAND_REG_START_ADDRESS2
);
2762 /* Set start block address */
2763 this->write_word(block
, this->base
+ ONENAND_REG_START_BLOCK_ADDRESS
);
2765 /* Check lock status */
2766 status
= this->read_word(this->base
+ ONENAND_REG_WP_STATUS
);
2767 if (!(status
& ONENAND_WP_US
)) {
2768 printk(KERN_ERR
"%s: block = %d, wp status = 0x%x\n",
2769 __func__
, block
, status
);
2778 * onenand_unlock_all - [OneNAND Interface] unlock all blocks
2779 * @param mtd MTD device structure
2783 static void onenand_unlock_all(struct mtd_info
*mtd
)
2785 struct onenand_chip
*this = mtd
->priv
;
2787 loff_t len
= mtd
->size
;
2789 if (this->options
& ONENAND_HAS_UNLOCK_ALL
) {
2790 /* Set start block address */
2791 this->write_word(0, this->base
+ ONENAND_REG_START_BLOCK_ADDRESS
);
2792 /* Write unlock command */
2793 this->command(mtd
, ONENAND_CMD_UNLOCK_ALL
, 0, 0);
2795 /* There's no return value */
2796 this->wait(mtd
, FL_LOCKING
);
2799 while (this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
)
2800 & ONENAND_CTRL_ONGO
)
2803 /* Don't check lock status */
2804 if (this->options
& ONENAND_SKIP_UNLOCK_CHECK
)
2807 /* Check lock status */
2808 if (onenand_check_lock_status(this))
2811 /* Workaround for all block unlock in DDP */
2812 if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
2813 /* All blocks on another chip */
2814 ofs
= this->chipsize
>> 1;
2815 len
= this->chipsize
>> 1;
2819 onenand_do_lock_cmd(mtd
, ofs
, len
, ONENAND_CMD_UNLOCK
);
2822 #ifdef CONFIG_MTD_ONENAND_OTP
2825 * onenand_otp_command - Send OTP specific command to OneNAND device
2826 * @param mtd MTD device structure
2827 * @param cmd the command to be sent
2828 * @param addr offset to read from or write to
2829 * @param len number of bytes to read or write
2831 static int onenand_otp_command(struct mtd_info
*mtd
, int cmd
, loff_t addr
,
2834 struct onenand_chip
*this = mtd
->priv
;
2835 int value
, block
, page
;
2837 /* Address translation */
2839 case ONENAND_CMD_OTP_ACCESS
:
2840 block
= (int) (addr
>> this->erase_shift
);
2845 block
= (int) (addr
>> this->erase_shift
);
2846 page
= (int) (addr
>> this->page_shift
);
2848 if (ONENAND_IS_2PLANE(this)) {
2849 /* Make the even block number */
2851 /* Is it the odd plane? */
2852 if (addr
& this->writesize
)
2856 page
&= this->page_mask
;
2861 /* Write 'DFS, FBA' of Flash */
2862 value
= onenand_block_address(this, block
);
2863 this->write_word(value
, this->base
+
2864 ONENAND_REG_START_ADDRESS1
);
2868 /* Now we use page size operation */
2869 int sectors
= 4, count
= 4;
2874 if (ONENAND_IS_2PLANE(this) && cmd
== ONENAND_CMD_PROG
)
2875 cmd
= ONENAND_CMD_2X_PROG
;
2876 dataram
= ONENAND_CURRENT_BUFFERRAM(this);
2880 /* Write 'FPA, FSA' of Flash */
2881 value
= onenand_page_address(page
, sectors
);
2882 this->write_word(value
, this->base
+
2883 ONENAND_REG_START_ADDRESS8
);
2885 /* Write 'BSA, BSC' of DataRAM */
2886 value
= onenand_buffer_address(dataram
, sectors
, count
);
2887 this->write_word(value
, this->base
+ ONENAND_REG_START_BUFFER
);
2890 /* Interrupt clear */
2891 this->write_word(ONENAND_INT_CLEAR
, this->base
+ ONENAND_REG_INTERRUPT
);
2894 this->write_word(cmd
, this->base
+ ONENAND_REG_COMMAND
);
2900 * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
2901 * @param mtd MTD device structure
2902 * @param to offset to write to
2903 * @param len number of bytes to write
2904 * @param retlen pointer to variable to store the number of written bytes
2905 * @param buf the data to write
2907 * OneNAND write out-of-band only for OTP
2909 static int onenand_otp_write_oob_nolock(struct mtd_info
*mtd
, loff_t to
,
2910 struct mtd_oob_ops
*ops
)
2912 struct onenand_chip
*this = mtd
->priv
;
2913 int column
, ret
= 0, oobsize
;
2916 size_t len
= ops
->ooblen
;
2917 const u_char
*buf
= ops
->oobbuf
;
2918 int block
, value
, status
;
2922 /* Initialize retlen, in case of early exit */
2925 oobsize
= mtd
->oobsize
;
2927 column
= to
& (mtd
->oobsize
- 1);
2929 oobbuf
= this->oob_buf
;
2931 /* Loop until all data write */
2932 while (written
< len
) {
2933 int thislen
= min_t(int, oobsize
, len
- written
);
2937 block
= (int) (to
>> this->erase_shift
);
2939 * Write 'DFS, FBA' of Flash
2940 * Add: F100h DQ=DFS, FBA
2943 value
= onenand_block_address(this, block
);
2944 this->write_word(value
, this->base
+
2945 ONENAND_REG_START_ADDRESS1
);
2948 * Select DataRAM for DDP
2952 value
= onenand_bufferram_address(this, block
);
2953 this->write_word(value
, this->base
+
2954 ONENAND_REG_START_ADDRESS2
);
2955 ONENAND_SET_NEXT_BUFFERRAM(this);
2958 * Enter OTP access mode
2960 this->command(mtd
, ONENAND_CMD_OTP_ACCESS
, 0, 0);
2961 this->wait(mtd
, FL_OTPING
);
2963 /* We send data to spare ram with oobsize
2964 * to prevent byte access */
2965 memcpy(oobbuf
+ column
, buf
, thislen
);
2968 * Write Data into DataRAM
2970 * in sector0/spare/page0
2973 this->write_bufferram(mtd
, ONENAND_SPARERAM
,
2974 oobbuf
, 0, mtd
->oobsize
);
2976 onenand_otp_command(mtd
, ONENAND_CMD_PROGOOB
, to
, mtd
->oobsize
);
2977 onenand_update_bufferram(mtd
, to
, 0);
2978 if (ONENAND_IS_2PLANE(this)) {
2979 ONENAND_SET_BUFFERRAM1(this);
2980 onenand_update_bufferram(mtd
, to
+ this->writesize
, 0);
2983 ret
= this->wait(mtd
, FL_WRITING
);
2985 printk(KERN_ERR
"%s: write failed %d\n", __func__
, ret
);
2989 /* Exit OTP access mode */
2990 this->command(mtd
, ONENAND_CMD_RESET
, 0, 0);
2991 this->wait(mtd
, FL_RESETING
);
2993 status
= this->read_word(this->base
+ ONENAND_REG_CTRL_STATUS
);
2996 if (status
== 0x60) {
2997 printk(KERN_DEBUG
"\nBLOCK\tSTATUS\n");
2998 printk(KERN_DEBUG
"1st Block\tLOCKED\n");
2999 printk(KERN_DEBUG
"OTP Block\tLOCKED\n");
3000 } else if (status
== 0x20) {
3001 printk(KERN_DEBUG
"\nBLOCK\tSTATUS\n");
3002 printk(KERN_DEBUG
"1st Block\tLOCKED\n");
3003 printk(KERN_DEBUG
"OTP Block\tUN-LOCKED\n");
3004 } else if (status
== 0x40) {
3005 printk(KERN_DEBUG
"\nBLOCK\tSTATUS\n");
3006 printk(KERN_DEBUG
"1st Block\tUN-LOCKED\n");
3007 printk(KERN_DEBUG
"OTP Block\tLOCKED\n");
3009 printk(KERN_DEBUG
"Reboot to check\n");
3016 to
+= mtd
->writesize
;
3021 ops
->oobretlen
= written
;
3026 /* Internal OTP operation */
3027 typedef int (*otp_op_t
)(struct mtd_info
*mtd
, loff_t form
, size_t len
,
3028 size_t *retlen
, u_char
*buf
);
3031 * do_otp_read - [DEFAULT] Read OTP block area
3032 * @param mtd MTD device structure
3033 * @param from The offset to read
3034 * @param len number of bytes to read
3035 * @param retlen pointer to variable to store the number of readbytes
3036 * @param buf the databuffer to put/get data
3038 * Read OTP block area.
3040 static int do_otp_read(struct mtd_info
*mtd
, loff_t from
, size_t len
,
3041 size_t *retlen
, u_char
*buf
)
3043 struct onenand_chip
*this = mtd
->priv
;
3044 struct mtd_oob_ops ops
= {
3052 /* Enter OTP access mode */
3053 this->command(mtd
, ONENAND_CMD_OTP_ACCESS
, 0, 0);
3054 this->wait(mtd
, FL_OTPING
);
3056 ret
= ONENAND_IS_4KB_PAGE(this) ?
3057 onenand_mlc_read_ops_nolock(mtd
, from
, &ops
) :
3058 onenand_read_ops_nolock(mtd
, from
, &ops
);
3060 /* Exit OTP access mode */
3061 this->command(mtd
, ONENAND_CMD_RESET
, 0, 0);
3062 this->wait(mtd
, FL_RESETING
);
3068 * do_otp_write - [DEFAULT] Write OTP block area
3069 * @param mtd MTD device structure
3070 * @param to The offset to write
3071 * @param len number of bytes to write
3072 * @param retlen pointer to variable to store the number of write bytes
3073 * @param buf the databuffer to put/get data
3075 * Write OTP block area.
3077 static int do_otp_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
3078 size_t *retlen
, u_char
*buf
)
3080 struct onenand_chip
*this = mtd
->priv
;
3081 unsigned char *pbuf
= buf
;
3083 struct mtd_oob_ops ops
;
3085 /* Force buffer page aligned */
3086 if (len
< mtd
->writesize
) {
3087 memcpy(this->page_buf
, buf
, len
);
3088 memset(this->page_buf
+ len
, 0xff, mtd
->writesize
- len
);
3089 pbuf
= this->page_buf
;
3090 len
= mtd
->writesize
;
3093 /* Enter OTP access mode */
3094 this->command(mtd
, ONENAND_CMD_OTP_ACCESS
, 0, 0);
3095 this->wait(mtd
, FL_OTPING
);
3101 ret
= onenand_write_ops_nolock(mtd
, to
, &ops
);
3102 *retlen
= ops
.retlen
;
3104 /* Exit OTP access mode */
3105 this->command(mtd
, ONENAND_CMD_RESET
, 0, 0);
3106 this->wait(mtd
, FL_RESETING
);
3112 * do_otp_lock - [DEFAULT] Lock OTP block area
3113 * @param mtd MTD device structure
3114 * @param from The offset to lock
3115 * @param len number of bytes to lock
3116 * @param retlen pointer to variable to store the number of lock bytes
3117 * @param buf the databuffer to put/get data
3119 * Lock OTP block area.
3121 static int do_otp_lock(struct mtd_info
*mtd
, loff_t from
, size_t len
,
3122 size_t *retlen
, u_char
*buf
)
3124 struct onenand_chip
*this = mtd
->priv
;
3125 struct mtd_oob_ops ops
;
3128 if (FLEXONENAND(this)) {
3130 /* Enter OTP access mode */
3131 this->command(mtd
, ONENAND_CMD_OTP_ACCESS
, 0, 0);
3132 this->wait(mtd
, FL_OTPING
);
3134 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
3135 * main area of page 49.
3137 ops
.len
= mtd
->writesize
;
3141 ret
= onenand_write_ops_nolock(mtd
, mtd
->writesize
* 49, &ops
);
3142 *retlen
= ops
.retlen
;
3144 /* Exit OTP access mode */
3145 this->command(mtd
, ONENAND_CMD_RESET
, 0, 0);
3146 this->wait(mtd
, FL_RESETING
);
3148 ops
.mode
= MTD_OPS_PLACE_OOB
;
3152 ret
= onenand_otp_write_oob_nolock(mtd
, from
, &ops
);
3153 *retlen
= ops
.oobretlen
;
3160 * onenand_otp_walk - [DEFAULT] Handle OTP operation
3161 * @param mtd MTD device structure
3162 * @param from The offset to read/write
3163 * @param len number of bytes to read/write
3164 * @param retlen pointer to variable to store the number of read bytes
3165 * @param buf the databuffer to put/get data
3166 * @param action do given action
3167 * @param mode specify user and factory
3169 * Handle OTP operation.
3171 static int onenand_otp_walk(struct mtd_info
*mtd
, loff_t from
, size_t len
,
3172 size_t *retlen
, u_char
*buf
,
3173 otp_op_t action
, int mode
)
3175 struct onenand_chip
*this = mtd
->priv
;
3182 density
= onenand_get_density(this->device_id
);
3183 if (density
< ONENAND_DEVICE_DENSITY_512Mb
)
3188 if (mode
== MTD_OTP_FACTORY
) {
3189 from
+= mtd
->writesize
* otp_pages
;
3190 otp_pages
= ONENAND_PAGES_PER_BLOCK
- otp_pages
;
3193 /* Check User/Factory boundary */
3194 if (mode
== MTD_OTP_USER
) {
3195 if (mtd
->writesize
* otp_pages
< from
+ len
)
3198 if (mtd
->writesize
* otp_pages
< len
)
3202 onenand_get_device(mtd
, FL_OTPING
);
3203 while (len
> 0 && otp_pages
> 0) {
3204 if (!action
) { /* OTP Info functions */
3205 struct otp_info
*otpinfo
;
3207 len
-= sizeof(struct otp_info
);
3213 otpinfo
= (struct otp_info
*) buf
;
3214 otpinfo
->start
= from
;
3215 otpinfo
->length
= mtd
->writesize
;
3216 otpinfo
->locked
= 0;
3218 from
+= mtd
->writesize
;
3219 buf
+= sizeof(struct otp_info
);
3220 *retlen
+= sizeof(struct otp_info
);
3224 ret
= action(mtd
, from
, len
, &tmp_retlen
, buf
);
3228 *retlen
+= tmp_retlen
;
3235 onenand_release_device(mtd
);
3241 * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
3242 * @param mtd MTD device structure
3243 * @param buf the databuffer to put/get data
3244 * @param len number of bytes to read
3246 * Read factory OTP info.
3248 static int onenand_get_fact_prot_info(struct mtd_info
*mtd
,
3249 struct otp_info
*buf
, size_t len
)
3254 ret
= onenand_otp_walk(mtd
, 0, len
, &retlen
, (u_char
*) buf
, NULL
, MTD_OTP_FACTORY
);
3256 return ret
? : retlen
;
3260 * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
3261 * @param mtd MTD device structure
3262 * @param from The offset to read
3263 * @param len number of bytes to read
3264 * @param retlen pointer to variable to store the number of read bytes
3265 * @param buf the databuffer to put/get data
3267 * Read factory OTP area.
3269 static int onenand_read_fact_prot_reg(struct mtd_info
*mtd
, loff_t from
,
3270 size_t len
, size_t *retlen
, u_char
*buf
)
3272 return onenand_otp_walk(mtd
, from
, len
, retlen
, buf
, do_otp_read
, MTD_OTP_FACTORY
);
3276 * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
3277 * @param mtd MTD device structure
3278 * @param buf the databuffer to put/get data
3279 * @param len number of bytes to read
3281 * Read user OTP info.
3283 static int onenand_get_user_prot_info(struct mtd_info
*mtd
,
3284 struct otp_info
*buf
, size_t len
)
3289 ret
= onenand_otp_walk(mtd
, 0, len
, &retlen
, (u_char
*) buf
, NULL
, MTD_OTP_USER
);
3291 return ret
? : retlen
;
3295 * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
3296 * @param mtd MTD device structure
3297 * @param from The offset to read
3298 * @param len number of bytes to read
3299 * @param retlen pointer to variable to store the number of read bytes
3300 * @param buf the databuffer to put/get data
3302 * Read user OTP area.
3304 static int onenand_read_user_prot_reg(struct mtd_info
*mtd
, loff_t from
,
3305 size_t len
, size_t *retlen
, u_char
*buf
)
3307 return onenand_otp_walk(mtd
, from
, len
, retlen
, buf
, do_otp_read
, MTD_OTP_USER
);
3311 * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
3312 * @param mtd MTD device structure
3313 * @param from The offset to write
3314 * @param len number of bytes to write
3315 * @param retlen pointer to variable to store the number of write bytes
3316 * @param buf the databuffer to put/get data
3318 * Write user OTP area.
3320 static int onenand_write_user_prot_reg(struct mtd_info
*mtd
, loff_t from
,
3321 size_t len
, size_t *retlen
, u_char
*buf
)
3323 return onenand_otp_walk(mtd
, from
, len
, retlen
, buf
, do_otp_write
, MTD_OTP_USER
);
3327 * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
3328 * @param mtd MTD device structure
3329 * @param from The offset to lock
3330 * @param len number of bytes to unlock
3332 * Write lock mark on spare area in page 0 in OTP block
3334 static int onenand_lock_user_prot_reg(struct mtd_info
*mtd
, loff_t from
,
3337 struct onenand_chip
*this = mtd
->priv
;
3338 u_char
*buf
= FLEXONENAND(this) ? this->page_buf
: this->oob_buf
;
3341 unsigned int otp_lock_offset
= ONENAND_OTP_LOCK_OFFSET
;
3343 memset(buf
, 0xff, FLEXONENAND(this) ? this->writesize
3346 * Write lock mark to 8th word of sector0 of page0 of the spare0.
3347 * We write 16 bytes spare area instead of 2 bytes.
3348 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
3349 * main area of page 49.
3353 len
= FLEXONENAND(this) ? mtd
->writesize
: 16;
3356 * Note: OTP lock operation
3357 * OTP block : 0xXXFC XX 1111 1100
3358 * 1st block : 0xXXF3 (If chip support) XX 1111 0011
3359 * Both : 0xXXF0 (If chip support) XX 1111 0000
3361 if (FLEXONENAND(this))
3362 otp_lock_offset
= FLEXONENAND_OTP_LOCK_OFFSET
;
3364 /* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */
3366 buf
[otp_lock_offset
] = 0xFC;
3368 buf
[otp_lock_offset
] = 0xF3;
3370 buf
[otp_lock_offset
] = 0xF0;
3372 printk(KERN_DEBUG
"[OneNAND] Invalid option selected for OTP\n");
3374 ret
= onenand_otp_walk(mtd
, from
, len
, &retlen
, buf
, do_otp_lock
, MTD_OTP_USER
);
3376 return ret
? : retlen
;
3379 #endif /* CONFIG_MTD_ONENAND_OTP */
3382 * onenand_check_features - Check and set OneNAND features
3383 * @param mtd MTD data structure
3385 * Check and set OneNAND features
3389 static void onenand_check_features(struct mtd_info
*mtd
)
3391 struct onenand_chip
*this = mtd
->priv
;
3392 unsigned int density
, process
, numbufs
;
3394 /* Lock scheme depends on density and process */
3395 density
= onenand_get_density(this->device_id
);
3396 process
= this->version_id
>> ONENAND_VERSION_PROCESS_SHIFT
;
3397 numbufs
= this->read_word(this->base
+ ONENAND_REG_NUM_BUFFERS
) >> 8;
3401 case ONENAND_DEVICE_DENSITY_4Gb
:
3402 if (ONENAND_IS_DDP(this))
3403 this->options
|= ONENAND_HAS_2PLANE
;
3404 else if (numbufs
== 1) {
3405 this->options
|= ONENAND_HAS_4KB_PAGE
;
3406 this->options
|= ONENAND_HAS_CACHE_PROGRAM
;
3408 * There are two different 4KiB pagesize chips
3409 * and no way to detect it by H/W config values.
3411 * To detect the correct NOP for each chips,
3412 * It should check the version ID as workaround.
3414 * Now it has as following
3415 * KFM4G16Q4M has NOP 4 with version ID 0x0131
3416 * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
3418 if ((this->version_id
& 0xf) == 0xe)
3419 this->options
|= ONENAND_HAS_NOP_1
;
3422 case ONENAND_DEVICE_DENSITY_2Gb
:
3423 /* 2Gb DDP does not have 2 plane */
3424 if (!ONENAND_IS_DDP(this))
3425 this->options
|= ONENAND_HAS_2PLANE
;
3426 this->options
|= ONENAND_HAS_UNLOCK_ALL
;
3428 case ONENAND_DEVICE_DENSITY_1Gb
:
3429 /* A-Die has all block unlock */
3431 this->options
|= ONENAND_HAS_UNLOCK_ALL
;
3435 /* Some OneNAND has continuous lock scheme */
3437 this->options
|= ONENAND_HAS_CONT_LOCK
;
3441 /* The MLC has 4KiB pagesize. */
3442 if (ONENAND_IS_MLC(this))
3443 this->options
|= ONENAND_HAS_4KB_PAGE
;
3445 if (ONENAND_IS_4KB_PAGE(this))
3446 this->options
&= ~ONENAND_HAS_2PLANE
;
3448 if (FLEXONENAND(this)) {
3449 this->options
&= ~ONENAND_HAS_CONT_LOCK
;
3450 this->options
|= ONENAND_HAS_UNLOCK_ALL
;
3453 if (this->options
& ONENAND_HAS_CONT_LOCK
)
3454 printk(KERN_DEBUG
"Lock scheme is Continuous Lock\n");
3455 if (this->options
& ONENAND_HAS_UNLOCK_ALL
)
3456 printk(KERN_DEBUG
"Chip support all block unlock\n");
3457 if (this->options
& ONENAND_HAS_2PLANE
)
3458 printk(KERN_DEBUG
"Chip has 2 plane\n");
3459 if (this->options
& ONENAND_HAS_4KB_PAGE
)
3460 printk(KERN_DEBUG
"Chip has 4KiB pagesize\n");
3461 if (this->options
& ONENAND_HAS_CACHE_PROGRAM
)
3462 printk(KERN_DEBUG
"Chip has cache program feature\n");
3466 * onenand_print_device_info - Print device & version ID
3467 * @param device device ID
3468 * @param version version ID
3470 * Print device & version ID
3472 static void onenand_print_device_info(int device
, int version
)
3474 int vcc
, demuxed
, ddp
, density
, flexonenand
;
3476 vcc
= device
& ONENAND_DEVICE_VCC_MASK
;
3477 demuxed
= device
& ONENAND_DEVICE_IS_DEMUX
;
3478 ddp
= device
& ONENAND_DEVICE_IS_DDP
;
3479 density
= onenand_get_density(device
);
3480 flexonenand
= device
& DEVICE_IS_FLEXONENAND
;
3481 printk(KERN_INFO
"%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
3482 demuxed
? "" : "Muxed ",
3483 flexonenand
? "Flex-" : "",
3486 vcc
? "2.65/3.3" : "1.8",
3488 printk(KERN_INFO
"OneNAND version = 0x%04x\n", version
);
3491 static const struct onenand_manufacturers onenand_manuf_ids
[] = {
3492 {ONENAND_MFR_SAMSUNG
, "Samsung"},
3493 {ONENAND_MFR_NUMONYX
, "Numonyx"},
3497 * onenand_check_maf - Check manufacturer ID
3498 * @param manuf manufacturer ID
3500 * Check manufacturer ID
3502 static int onenand_check_maf(int manuf
)
3504 int size
= ARRAY_SIZE(onenand_manuf_ids
);
3508 for (i
= 0; i
< size
; i
++)
3509 if (manuf
== onenand_manuf_ids
[i
].id
)
3513 name
= onenand_manuf_ids
[i
].name
;
3517 printk(KERN_DEBUG
"OneNAND Manufacturer: %s (0x%0x)\n", name
, manuf
);
3523 * flexonenand_get_boundary - Reads the SLC boundary
3524 * @param onenand_info - onenand info structure
3526 static int flexonenand_get_boundary(struct mtd_info
*mtd
)
3528 struct onenand_chip
*this = mtd
->priv
;
3530 int ret
, syscfg
, locked
;
3533 syscfg
= this->read_word(this->base
+ ONENAND_REG_SYS_CFG1
);
3534 this->write_word((syscfg
| 0x0100), this->base
+ ONENAND_REG_SYS_CFG1
);
3536 for (die
= 0; die
< this->dies
; die
++) {
3537 this->command(mtd
, FLEXONENAND_CMD_PI_ACCESS
, die
, 0);
3538 this->wait(mtd
, FL_SYNCING
);
3540 this->command(mtd
, FLEXONENAND_CMD_READ_PI
, die
, 0);
3541 ret
= this->wait(mtd
, FL_READING
);
3543 bdry
= this->read_word(this->base
+ ONENAND_DATARAM
);
3544 if ((bdry
>> FLEXONENAND_PI_UNLOCK_SHIFT
) == 3)
3548 this->boundary
[die
] = bdry
& FLEXONENAND_PI_MASK
;
3550 this->command(mtd
, ONENAND_CMD_RESET
, 0, 0);
3551 ret
= this->wait(mtd
, FL_RESETING
);
3553 printk(KERN_INFO
"Die %d boundary: %d%s\n", die
,
3554 this->boundary
[die
], locked
? "(Locked)" : "(Unlocked)");
3558 this->write_word(syscfg
, this->base
+ ONENAND_REG_SYS_CFG1
);
3563 * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
3564 * boundary[], diesize[], mtd->size, mtd->erasesize
3565 * @param mtd - MTD device structure
3567 static void flexonenand_get_size(struct mtd_info
*mtd
)
3569 struct onenand_chip
*this = mtd
->priv
;
3570 int die
, i
, eraseshift
, density
;
3571 int blksperdie
, maxbdry
;
3574 density
= onenand_get_density(this->device_id
);
3575 blksperdie
= ((loff_t
)(16 << density
) << 20) >> (this->erase_shift
);
3576 blksperdie
>>= ONENAND_IS_DDP(this) ? 1 : 0;
3577 maxbdry
= blksperdie
- 1;
3578 eraseshift
= this->erase_shift
- 1;
3580 mtd
->numeraseregions
= this->dies
<< 1;
3582 /* This fills up the device boundary */
3583 flexonenand_get_boundary(mtd
);
3586 for (; die
< this->dies
; die
++) {
3587 if (!die
|| this->boundary
[die
-1] != maxbdry
) {
3589 mtd
->eraseregions
[i
].offset
= ofs
;
3590 mtd
->eraseregions
[i
].erasesize
= 1 << eraseshift
;
3591 mtd
->eraseregions
[i
].numblocks
=
3592 this->boundary
[die
] + 1;
3593 ofs
+= mtd
->eraseregions
[i
].numblocks
<< eraseshift
;
3596 mtd
->numeraseregions
-= 1;
3597 mtd
->eraseregions
[i
].numblocks
+=
3598 this->boundary
[die
] + 1;
3599 ofs
+= (this->boundary
[die
] + 1) << (eraseshift
- 1);
3601 if (this->boundary
[die
] != maxbdry
) {
3603 mtd
->eraseregions
[i
].offset
= ofs
;
3604 mtd
->eraseregions
[i
].erasesize
= 1 << eraseshift
;
3605 mtd
->eraseregions
[i
].numblocks
= maxbdry
^
3606 this->boundary
[die
];
3607 ofs
+= mtd
->eraseregions
[i
].numblocks
<< eraseshift
;
3610 mtd
->numeraseregions
-= 1;
3613 /* Expose MLC erase size except when all blocks are SLC */
3614 mtd
->erasesize
= 1 << this->erase_shift
;
3615 if (mtd
->numeraseregions
== 1)
3616 mtd
->erasesize
>>= 1;
3618 printk(KERN_INFO
"Device has %d eraseregions\n", mtd
->numeraseregions
);
3619 for (i
= 0; i
< mtd
->numeraseregions
; i
++)
3620 printk(KERN_INFO
"[offset: 0x%08x, erasesize: 0x%05x,"
3621 " numblocks: %04u]\n",
3622 (unsigned int) mtd
->eraseregions
[i
].offset
,
3623 mtd
->eraseregions
[i
].erasesize
,
3624 mtd
->eraseregions
[i
].numblocks
);
3626 for (die
= 0, mtd
->size
= 0; die
< this->dies
; die
++) {
3627 this->diesize
[die
] = (loff_t
)blksperdie
<< this->erase_shift
;
3628 this->diesize
[die
] -= (loff_t
)(this->boundary
[die
] + 1)
3629 << (this->erase_shift
- 1);
3630 mtd
->size
+= this->diesize
[die
];
3635 * flexonenand_check_blocks_erased - Check if blocks are erased
3636 * @param mtd_info - mtd info structure
3637 * @param start - first erase block to check
3638 * @param end - last erase block to check
3640 * Converting an unerased block from MLC to SLC
3641 * causes byte values to change. Since both data and its ECC
3642 * have changed, reads on the block give uncorrectable error.
3643 * This might lead to the block being detected as bad.
3645 * Avoid this by ensuring that the block to be converted is
3648 static int flexonenand_check_blocks_erased(struct mtd_info
*mtd
, int start
, int end
)
3650 struct onenand_chip
*this = mtd
->priv
;
3653 struct mtd_oob_ops ops
= {
3654 .mode
= MTD_OPS_PLACE_OOB
,
3656 .ooblen
= mtd
->oobsize
,
3658 .oobbuf
= this->oob_buf
,
3662 printk(KERN_DEBUG
"Check blocks from %d to %d\n", start
, end
);
3664 for (block
= start
; block
<= end
; block
++) {
3665 addr
= flexonenand_addr(this, block
);
3666 if (onenand_block_isbad_nolock(mtd
, addr
, 0))
3670 * Since main area write results in ECC write to spare,
3671 * it is sufficient to check only ECC bytes for change.
3673 ret
= onenand_read_oob_nolock(mtd
, addr
, &ops
);
3677 for (i
= 0; i
< mtd
->oobsize
; i
++)
3678 if (this->oob_buf
[i
] != 0xff)
3681 if (i
!= mtd
->oobsize
) {
3682 printk(KERN_WARNING
"%s: Block %d not erased.\n",
3692 * flexonenand_set_boundary - Writes the SLC boundary
3693 * @param mtd - mtd info structure
3695 int flexonenand_set_boundary(struct mtd_info
*mtd
, int die
,
3696 int boundary
, int lock
)
3698 struct onenand_chip
*this = mtd
->priv
;
3699 int ret
, density
, blksperdie
, old
, new, thisboundary
;
3702 /* Change only once for SDP Flex-OneNAND */
3703 if (die
&& (!ONENAND_IS_DDP(this)))
3706 /* boundary value of -1 indicates no required change */
3707 if (boundary
< 0 || boundary
== this->boundary
[die
])
3710 density
= onenand_get_density(this->device_id
);
3711 blksperdie
= ((16 << density
) << 20) >> this->erase_shift
;
3712 blksperdie
>>= ONENAND_IS_DDP(this) ? 1 : 0;
3714 if (boundary
>= blksperdie
) {
3715 printk(KERN_ERR
"%s: Invalid boundary value. "
3716 "Boundary not changed.\n", __func__
);
3720 /* Check if converting blocks are erased */
3721 old
= this->boundary
[die
] + (die
* this->density_mask
);
3722 new = boundary
+ (die
* this->density_mask
);
3723 ret
= flexonenand_check_blocks_erased(mtd
, min(old
, new) + 1, max(old
, new));
3725 printk(KERN_ERR
"%s: Please erase blocks "
3726 "before boundary change\n", __func__
);
3730 this->command(mtd
, FLEXONENAND_CMD_PI_ACCESS
, die
, 0);
3731 this->wait(mtd
, FL_SYNCING
);
3733 /* Check is boundary is locked */
3734 this->command(mtd
, FLEXONENAND_CMD_READ_PI
, die
, 0);
3735 ret
= this->wait(mtd
, FL_READING
);
3737 thisboundary
= this->read_word(this->base
+ ONENAND_DATARAM
);
3738 if ((thisboundary
>> FLEXONENAND_PI_UNLOCK_SHIFT
) != 3) {
3739 printk(KERN_ERR
"%s: boundary locked\n", __func__
);
3744 printk(KERN_INFO
"Changing die %d boundary: %d%s\n",
3745 die
, boundary
, lock
? "(Locked)" : "(Unlocked)");
3747 addr
= die
? this->diesize
[0] : 0;
3749 boundary
&= FLEXONENAND_PI_MASK
;
3750 boundary
|= lock
? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT
);
3752 this->command(mtd
, ONENAND_CMD_ERASE
, addr
, 0);
3753 ret
= this->wait(mtd
, FL_ERASING
);
3755 printk(KERN_ERR
"%s: Failed PI erase for Die %d\n",
3760 this->write_word(boundary
, this->base
+ ONENAND_DATARAM
);
3761 this->command(mtd
, ONENAND_CMD_PROG
, addr
, 0);
3762 ret
= this->wait(mtd
, FL_WRITING
);
3764 printk(KERN_ERR
"%s: Failed PI write for Die %d\n",
3769 this->command(mtd
, FLEXONENAND_CMD_PI_UPDATE
, die
, 0);
3770 ret
= this->wait(mtd
, FL_WRITING
);
3772 this->write_word(ONENAND_CMD_RESET
, this->base
+ ONENAND_REG_COMMAND
);
3773 this->wait(mtd
, FL_RESETING
);
3775 /* Recalculate device size on boundary change*/
3776 flexonenand_get_size(mtd
);
3782 * onenand_chip_probe - [OneNAND Interface] The generic chip probe
3783 * @param mtd MTD device structure
3785 * OneNAND detection method:
3786 * Compare the values from command with ones from register
3788 static int onenand_chip_probe(struct mtd_info
*mtd
)
3790 struct onenand_chip
*this = mtd
->priv
;
3791 int bram_maf_id
, bram_dev_id
, maf_id
, dev_id
;
3794 /* Save system configuration 1 */
3795 syscfg
= this->read_word(this->base
+ ONENAND_REG_SYS_CFG1
);
3796 /* Clear Sync. Burst Read mode to read BootRAM */
3797 this->write_word((syscfg
& ~ONENAND_SYS_CFG1_SYNC_READ
& ~ONENAND_SYS_CFG1_SYNC_WRITE
), this->base
+ ONENAND_REG_SYS_CFG1
);
3799 /* Send the command for reading device ID from BootRAM */
3800 this->write_word(ONENAND_CMD_READID
, this->base
+ ONENAND_BOOTRAM
);
3802 /* Read manufacturer and device IDs from BootRAM */
3803 bram_maf_id
= this->read_word(this->base
+ ONENAND_BOOTRAM
+ 0x0);
3804 bram_dev_id
= this->read_word(this->base
+ ONENAND_BOOTRAM
+ 0x2);
3806 /* Reset OneNAND to read default register values */
3807 this->write_word(ONENAND_CMD_RESET
, this->base
+ ONENAND_BOOTRAM
);
3809 this->wait(mtd
, FL_RESETING
);
3811 /* Restore system configuration 1 */
3812 this->write_word(syscfg
, this->base
+ ONENAND_REG_SYS_CFG1
);
3814 /* Check manufacturer ID */
3815 if (onenand_check_maf(bram_maf_id
))
3818 /* Read manufacturer and device IDs from Register */
3819 maf_id
= this->read_word(this->base
+ ONENAND_REG_MANUFACTURER_ID
);
3820 dev_id
= this->read_word(this->base
+ ONENAND_REG_DEVICE_ID
);
3822 /* Check OneNAND device */
3823 if (maf_id
!= bram_maf_id
|| dev_id
!= bram_dev_id
)
3830 * onenand_probe - [OneNAND Interface] Probe the OneNAND device
3831 * @param mtd MTD device structure
3833 static int onenand_probe(struct mtd_info
*mtd
)
3835 struct onenand_chip
*this = mtd
->priv
;
3836 int maf_id
, dev_id
, ver_id
;
3840 ret
= this->chip_probe(mtd
);
3844 /* Read manufacturer and device IDs from Register */
3845 maf_id
= this->read_word(this->base
+ ONENAND_REG_MANUFACTURER_ID
);
3846 dev_id
= this->read_word(this->base
+ ONENAND_REG_DEVICE_ID
);
3847 ver_id
= this->read_word(this->base
+ ONENAND_REG_VERSION_ID
);
3848 this->technology
= this->read_word(this->base
+ ONENAND_REG_TECHNOLOGY
);
3850 /* Flash device information */
3851 onenand_print_device_info(dev_id
, ver_id
);
3852 this->device_id
= dev_id
;
3853 this->version_id
= ver_id
;
3855 /* Check OneNAND features */
3856 onenand_check_features(mtd
);
3858 density
= onenand_get_density(dev_id
);
3859 if (FLEXONENAND(this)) {
3860 this->dies
= ONENAND_IS_DDP(this) ? 2 : 1;
3861 /* Maximum possible erase regions */
3862 mtd
->numeraseregions
= this->dies
<< 1;
3863 mtd
->eraseregions
= kzalloc(sizeof(struct mtd_erase_region_info
)
3864 * (this->dies
<< 1), GFP_KERNEL
);
3865 if (!mtd
->eraseregions
)
3870 * For Flex-OneNAND, chipsize represents maximum possible device size.
3871 * mtd->size represents the actual device size.
3873 this->chipsize
= (16 << density
) << 20;
3875 /* OneNAND page size & block size */
3876 /* The data buffer size is equal to page size */
3877 mtd
->writesize
= this->read_word(this->base
+ ONENAND_REG_DATA_BUFFER_SIZE
);
3878 /* We use the full BufferRAM */
3879 if (ONENAND_IS_4KB_PAGE(this))
3880 mtd
->writesize
<<= 1;
3882 mtd
->oobsize
= mtd
->writesize
>> 5;
3883 /* Pages per a block are always 64 in OneNAND */
3884 mtd
->erasesize
= mtd
->writesize
<< 6;
3886 * Flex-OneNAND SLC area has 64 pages per block.
3887 * Flex-OneNAND MLC area has 128 pages per block.
3888 * Expose MLC erase size to find erase_shift and page_mask.
3890 if (FLEXONENAND(this))
3891 mtd
->erasesize
<<= 1;
3893 this->erase_shift
= ffs(mtd
->erasesize
) - 1;
3894 this->page_shift
= ffs(mtd
->writesize
) - 1;
3895 this->page_mask
= (1 << (this->erase_shift
- this->page_shift
)) - 1;
3896 /* Set density mask. it is used for DDP */
3897 if (ONENAND_IS_DDP(this))
3898 this->density_mask
= this->chipsize
>> (this->erase_shift
+ 1);
3899 /* It's real page size */
3900 this->writesize
= mtd
->writesize
;
3902 /* REVISIT: Multichip handling */
3904 if (FLEXONENAND(this))
3905 flexonenand_get_size(mtd
);
3907 mtd
->size
= this->chipsize
;
3910 * We emulate the 4KiB page and 256KiB erase block size
3911 * But oobsize is still 64 bytes.
3912 * It is only valid if you turn on 2X program support,
3913 * Otherwise it will be ignored by compiler.
3915 if (ONENAND_IS_2PLANE(this)) {
3916 mtd
->writesize
<<= 1;
3917 mtd
->erasesize
<<= 1;
3924 * onenand_suspend - [MTD Interface] Suspend the OneNAND flash
3925 * @param mtd MTD device structure
3927 static int onenand_suspend(struct mtd_info
*mtd
)
3929 return onenand_get_device(mtd
, FL_PM_SUSPENDED
);
3933 * onenand_resume - [MTD Interface] Resume the OneNAND flash
3934 * @param mtd MTD device structure
3936 static void onenand_resume(struct mtd_info
*mtd
)
3938 struct onenand_chip
*this = mtd
->priv
;
3940 if (this->state
== FL_PM_SUSPENDED
)
3941 onenand_release_device(mtd
);
3943 printk(KERN_ERR
"%s: resume() called for the chip which is not "
3944 "in suspended state\n", __func__
);
3948 * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
3949 * @param mtd MTD device structure
3950 * @param maxchips Number of chips to scan for
3952 * This fills out all the not initialized function pointers
3953 * with the defaults.
3954 * The flash ID is read and the mtd/chip structures are
3955 * filled with the appropriate values.
3957 int onenand_scan(struct mtd_info
*mtd
, int maxchips
)
3960 struct onenand_chip
*this = mtd
->priv
;
3962 if (!this->read_word
)
3963 this->read_word
= onenand_readw
;
3964 if (!this->write_word
)
3965 this->write_word
= onenand_writew
;
3968 this->command
= onenand_command
;
3970 onenand_setup_wait(mtd
);
3971 if (!this->bbt_wait
)
3972 this->bbt_wait
= onenand_bbt_wait
;
3973 if (!this->unlock_all
)
3974 this->unlock_all
= onenand_unlock_all
;
3976 if (!this->chip_probe
)
3977 this->chip_probe
= onenand_chip_probe
;
3979 if (!this->read_bufferram
)
3980 this->read_bufferram
= onenand_read_bufferram
;
3981 if (!this->write_bufferram
)
3982 this->write_bufferram
= onenand_write_bufferram
;
3984 if (!this->block_markbad
)
3985 this->block_markbad
= onenand_default_block_markbad
;
3986 if (!this->scan_bbt
)
3987 this->scan_bbt
= onenand_default_bbt
;
3989 if (onenand_probe(mtd
))
3992 /* Set Sync. Burst Read after probing */
3993 if (this->mmcontrol
) {
3994 printk(KERN_INFO
"OneNAND Sync. Burst Read support\n");
3995 this->read_bufferram
= onenand_sync_read_bufferram
;
3998 /* Allocate buffers, if necessary */
3999 if (!this->page_buf
) {
4000 this->page_buf
= kzalloc(mtd
->writesize
, GFP_KERNEL
);
4001 if (!this->page_buf
) {
4002 printk(KERN_ERR
"%s: Can't allocate page_buf\n",
4006 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
4007 this->verify_buf
= kzalloc(mtd
->writesize
, GFP_KERNEL
);
4008 if (!this->verify_buf
) {
4009 kfree(this->page_buf
);
4013 this->options
|= ONENAND_PAGEBUF_ALLOC
;
4015 if (!this->oob_buf
) {
4016 this->oob_buf
= kzalloc(mtd
->oobsize
, GFP_KERNEL
);
4017 if (!this->oob_buf
) {
4018 printk(KERN_ERR
"%s: Can't allocate oob_buf\n",
4020 if (this->options
& ONENAND_PAGEBUF_ALLOC
) {
4021 this->options
&= ~ONENAND_PAGEBUF_ALLOC
;
4022 kfree(this->page_buf
);
4026 this->options
|= ONENAND_OOBBUF_ALLOC
;
4029 this->state
= FL_READY
;
4030 init_waitqueue_head(&this->wq
);
4031 spin_lock_init(&this->chip_lock
);
4034 * Allow subpage writes up to oobsize.
4036 switch (mtd
->oobsize
) {
4038 if (FLEXONENAND(this)) {
4039 this->ecclayout
= &flexonenand_oob_128
;
4040 mtd
->subpage_sft
= 0;
4042 this->ecclayout
= &onenand_oob_128
;
4043 mtd
->subpage_sft
= 2;
4045 if (ONENAND_IS_NOP_1(this))
4046 mtd
->subpage_sft
= 0;
4049 this->ecclayout
= &onenand_oob_64
;
4050 mtd
->subpage_sft
= 2;
4054 this->ecclayout
= &onenand_oob_32
;
4055 mtd
->subpage_sft
= 1;
4059 printk(KERN_WARNING
"%s: No OOB scheme defined for oobsize %d\n",
4060 __func__
, mtd
->oobsize
);
4061 mtd
->subpage_sft
= 0;
4062 /* To prevent kernel oops */
4063 this->ecclayout
= &onenand_oob_32
;
4067 this->subpagesize
= mtd
->writesize
>> mtd
->subpage_sft
;
4070 * The number of bytes available for a client to place data into
4071 * the out of band area
4073 this->ecclayout
->oobavail
= 0;
4074 for (i
= 0; i
< MTD_MAX_OOBFREE_ENTRIES
&&
4075 this->ecclayout
->oobfree
[i
].length
; i
++)
4076 this->ecclayout
->oobavail
+=
4077 this->ecclayout
->oobfree
[i
].length
;
4078 mtd
->oobavail
= this->ecclayout
->oobavail
;
4080 mtd
->ecclayout
= this->ecclayout
;
4081 mtd
->ecc_strength
= 1;
4083 /* Fill in remaining MTD driver data */
4084 mtd
->type
= ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH
: MTD_NANDFLASH
;
4085 mtd
->flags
= MTD_CAP_NANDFLASH
;
4086 mtd
->_erase
= onenand_erase
;
4088 mtd
->_unpoint
= NULL
;
4089 mtd
->_read
= onenand_read
;
4090 mtd
->_write
= onenand_write
;
4091 mtd
->_read_oob
= onenand_read_oob
;
4092 mtd
->_write_oob
= onenand_write_oob
;
4093 mtd
->_panic_write
= onenand_panic_write
;
4094 #ifdef CONFIG_MTD_ONENAND_OTP
4095 mtd
->_get_fact_prot_info
= onenand_get_fact_prot_info
;
4096 mtd
->_read_fact_prot_reg
= onenand_read_fact_prot_reg
;
4097 mtd
->_get_user_prot_info
= onenand_get_user_prot_info
;
4098 mtd
->_read_user_prot_reg
= onenand_read_user_prot_reg
;
4099 mtd
->_write_user_prot_reg
= onenand_write_user_prot_reg
;
4100 mtd
->_lock_user_prot_reg
= onenand_lock_user_prot_reg
;
4102 mtd
->_sync
= onenand_sync
;
4103 mtd
->_lock
= onenand_lock
;
4104 mtd
->_unlock
= onenand_unlock
;
4105 mtd
->_suspend
= onenand_suspend
;
4106 mtd
->_resume
= onenand_resume
;
4107 mtd
->_block_isbad
= onenand_block_isbad
;
4108 mtd
->_block_markbad
= onenand_block_markbad
;
4109 mtd
->owner
= THIS_MODULE
;
4110 mtd
->writebufsize
= mtd
->writesize
;
4112 /* Unlock whole block */
4113 if (!(this->options
& ONENAND_SKIP_INITIAL_UNLOCKING
))
4114 this->unlock_all(mtd
);
4116 ret
= this->scan_bbt(mtd
);
4117 if ((!FLEXONENAND(this)) || ret
)
4120 /* Change Flex-OneNAND boundaries if required */
4121 for (i
= 0; i
< MAX_DIES
; i
++)
4122 flexonenand_set_boundary(mtd
, i
, flex_bdry
[2 * i
],
4123 flex_bdry
[(2 * i
) + 1]);
4129 * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
4130 * @param mtd MTD device structure
4132 void onenand_release(struct mtd_info
*mtd
)
4134 struct onenand_chip
*this = mtd
->priv
;
4136 /* Deregister partitions */
4137 mtd_device_unregister(mtd
);
4139 /* Free bad block table memory, if allocated */
4141 struct bbm_info
*bbm
= this->bbm
;
4145 /* Buffers allocated by onenand_scan */
4146 if (this->options
& ONENAND_PAGEBUF_ALLOC
) {
4147 kfree(this->page_buf
);
4148 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
4149 kfree(this->verify_buf
);
4152 if (this->options
& ONENAND_OOBBUF_ALLOC
)
4153 kfree(this->oob_buf
);
4154 kfree(mtd
->eraseregions
);
4157 EXPORT_SYMBOL_GPL(onenand_scan
);
4158 EXPORT_SYMBOL_GPL(onenand_release
);
4160 MODULE_LICENSE("GPL");
4161 MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
4162 MODULE_DESCRIPTION("Generic OneNAND flash driver code");