2 * Copyright (C) 2010 Juergen Beisert, Pengutronix
4 * This code is based on:
5 * Author: Vitaly Wool <vital@embeddedalley.com>
7 * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
8 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 #define DRIVER_NAME "mxsfb"
24 * @brief LCDIF driver for i.MX23 and i.MX28
26 * The LCDIF support four modes of operation
27 * - MPU interface (to drive smart displays) -> not supported yet
28 * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
29 * - Dotclock interface (to drive LC displays with RGB data and sync signals)
30 * - DVI (to drive ITU-R BT656) -> not supported yet
32 * This driver depends on a correct setup of the pins used for this purpose
33 * (platform specific).
35 * For the developer: Don't forget to set the data bus width to the display
36 * in the imx_fb_videomode structure. You will else end up with ugly colours.
37 * If you fight against jitter you can vary the clock delay. This is a feature
38 * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
39 * the required value in the imx_fb_videomode structure.
42 #include <linux/module.h>
43 #include <linux/kernel.h>
44 #include <linux/of_device.h>
45 #include <linux/of_gpio.h>
46 #include <linux/platform_device.h>
47 #include <linux/clk.h>
48 #include <linux/dma-mapping.h>
50 #include <linux/pinctrl/consumer.h>
51 #include <linux/mxsfb.h>
56 #define LCDC_CTRL 0x00
57 #define LCDC_CTRL1 0x10
58 #define LCDC_V4_CTRL2 0x20
59 #define LCDC_V3_TRANSFER_COUNT 0x20
60 #define LCDC_V4_TRANSFER_COUNT 0x30
61 #define LCDC_V4_CUR_BUF 0x40
62 #define LCDC_V4_NEXT_BUF 0x50
63 #define LCDC_V3_CUR_BUF 0x30
64 #define LCDC_V3_NEXT_BUF 0x40
65 #define LCDC_TIMING 0x60
66 #define LCDC_VDCTRL0 0x70
67 #define LCDC_VDCTRL1 0x80
68 #define LCDC_VDCTRL2 0x90
69 #define LCDC_VDCTRL3 0xa0
70 #define LCDC_VDCTRL4 0xb0
71 #define LCDC_DVICTRL0 0xc0
72 #define LCDC_DVICTRL1 0xd0
73 #define LCDC_DVICTRL2 0xe0
74 #define LCDC_DVICTRL3 0xf0
75 #define LCDC_DVICTRL4 0x100
76 #define LCDC_V4_DATA 0x180
77 #define LCDC_V3_DATA 0x1b0
78 #define LCDC_V4_DEBUG0 0x1d0
79 #define LCDC_V3_DEBUG0 0x1f0
81 #define CTRL_SFTRST (1 << 31)
82 #define CTRL_CLKGATE (1 << 30)
83 #define CTRL_BYPASS_COUNT (1 << 19)
84 #define CTRL_VSYNC_MODE (1 << 18)
85 #define CTRL_DOTCLK_MODE (1 << 17)
86 #define CTRL_DATA_SELECT (1 << 16)
87 #define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
88 #define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
89 #define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
90 #define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
91 #define CTRL_MASTER (1 << 5)
92 #define CTRL_DF16 (1 << 3)
93 #define CTRL_DF18 (1 << 2)
94 #define CTRL_DF24 (1 << 1)
95 #define CTRL_RUN (1 << 0)
97 #define CTRL1_FIFO_CLEAR (1 << 21)
98 #define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
99 #define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
101 #define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
102 #define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
103 #define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
104 #define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
107 #define VDCTRL0_ENABLE_PRESENT (1 << 28)
108 #define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
109 #define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
110 #define VDCTRL0_DOTCLK_ACT_FAILING (1 << 25)
111 #define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
112 #define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
113 #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
114 #define VDCTRL0_HALF_LINE (1 << 19)
115 #define VDCTRL0_HALF_LINE_MODE (1 << 18)
116 #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
117 #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
119 #define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
120 #define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
122 #define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
123 #define VDCTRL3_VSYNC_ONLY (1 << 28)
124 #define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
125 #define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
126 #define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
127 #define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
129 #define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
130 #define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
131 #define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
132 #define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
134 #define DEBUG0_HSYNC (1 < 26)
135 #define DEBUG0_VSYNC (1 < 25)
150 /* CPU dependent register offsets */
151 struct mxsfb_devdata
{
152 unsigned transfer_count
;
156 unsigned hs_wdth_mask
;
157 unsigned hs_wdth_shift
;
162 struct fb_info fb_info
;
163 struct platform_device
*pdev
;
165 void __iomem
*base
; /* registers */
166 unsigned allocated_size
;
168 unsigned ld_intf_width
;
169 unsigned dotclk_delay
;
170 const struct mxsfb_devdata
*devdata
;
174 #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
175 #define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
177 static const struct mxsfb_devdata mxsfb_devdata
[] = {
179 .transfer_count
= LCDC_V3_TRANSFER_COUNT
,
180 .cur_buf
= LCDC_V3_CUR_BUF
,
181 .next_buf
= LCDC_V3_NEXT_BUF
,
182 .debug0
= LCDC_V3_DEBUG0
,
183 .hs_wdth_mask
= 0xff,
188 .transfer_count
= LCDC_V4_TRANSFER_COUNT
,
189 .cur_buf
= LCDC_V4_CUR_BUF
,
190 .next_buf
= LCDC_V4_NEXT_BUF
,
191 .debug0
= LCDC_V4_DEBUG0
,
192 .hs_wdth_mask
= 0x3fff,
198 #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
200 /* mask and shift depends on architecture */
201 static inline u32
set_hsync_pulse_width(struct mxsfb_info
*host
, unsigned val
)
203 return (val
& host
->devdata
->hs_wdth_mask
) <<
204 host
->devdata
->hs_wdth_shift
;
207 static inline u32
get_hsync_pulse_width(struct mxsfb_info
*host
, unsigned val
)
209 return (val
>> host
->devdata
->hs_wdth_shift
) &
210 host
->devdata
->hs_wdth_mask
;
213 static const struct fb_bitfield def_rgb565
[] = {
226 [TRANSP
] = { /* no support for transparency */
231 static const struct fb_bitfield def_rgb666
[] = {
244 [TRANSP
] = { /* no support for transparency */
249 static const struct fb_bitfield def_rgb888
[] = {
262 [TRANSP
] = { /* no support for transparency */
267 static inline unsigned chan_to_field(unsigned chan
, struct fb_bitfield
*bf
)
270 chan
>>= 16 - bf
->length
;
271 return chan
<< bf
->offset
;
274 static int mxsfb_check_var(struct fb_var_screeninfo
*var
,
275 struct fb_info
*fb_info
)
277 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
278 const struct fb_bitfield
*rgb
= NULL
;
280 if (var
->xres
< MIN_XRES
)
281 var
->xres
= MIN_XRES
;
282 if (var
->yres
< MIN_YRES
)
283 var
->yres
= MIN_YRES
;
285 var
->xres_virtual
= var
->xres
;
287 var
->yres_virtual
= var
->yres
;
289 switch (var
->bits_per_pixel
) {
291 /* always expect RGB 565 */
295 switch (host
->ld_intf_width
) {
297 pr_debug("Unsupported LCD bus width mapping\n");
301 /* 24 bit to 18 bit mapping */
311 pr_debug("Unsupported colour depth: %u\n", var
->bits_per_pixel
);
316 * Copy the RGB parameters for this display
317 * from the machine specific parameters.
320 var
->green
= rgb
[GREEN
];
321 var
->blue
= rgb
[BLUE
];
322 var
->transp
= rgb
[TRANSP
];
327 static void mxsfb_enable_controller(struct fb_info
*fb_info
)
329 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
332 dev_dbg(&host
->pdev
->dev
, "%s\n", __func__
);
334 clk_prepare_enable(host
->clk
);
335 clk_set_rate(host
->clk
, PICOS2KHZ(fb_info
->var
.pixclock
) * 1000U);
337 /* if it was disabled, re-enable the mode again */
338 writel(CTRL_DOTCLK_MODE
, host
->base
+ LCDC_CTRL
+ REG_SET
);
340 /* enable the SYNC signals first, then the DMA engine */
341 reg
= readl(host
->base
+ LCDC_VDCTRL4
);
342 reg
|= VDCTRL4_SYNC_SIGNALS_ON
;
343 writel(reg
, host
->base
+ LCDC_VDCTRL4
);
345 writel(CTRL_RUN
, host
->base
+ LCDC_CTRL
+ REG_SET
);
350 static void mxsfb_disable_controller(struct fb_info
*fb_info
)
352 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
356 dev_dbg(&host
->pdev
->dev
, "%s\n", __func__
);
359 * Even if we disable the controller here, it will still continue
360 * until its FIFOs are running out of data
362 writel(CTRL_DOTCLK_MODE
, host
->base
+ LCDC_CTRL
+ REG_CLR
);
366 reg
= readl(host
->base
+ LCDC_CTRL
);
367 if (!(reg
& CTRL_RUN
))
372 writel(VDCTRL4_SYNC_SIGNALS_ON
, host
->base
+ LCDC_VDCTRL4
+ REG_CLR
);
374 clk_disable_unprepare(host
->clk
);
379 static int mxsfb_set_par(struct fb_info
*fb_info
)
381 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
382 u32 ctrl
, vdctrl0
, vdctrl4
;
383 int line_size
, fb_size
;
386 line_size
= fb_info
->var
.xres
* (fb_info
->var
.bits_per_pixel
>> 3);
387 fb_size
= fb_info
->var
.yres_virtual
* line_size
;
389 if (fb_size
> fb_info
->fix
.smem_len
)
392 fb_info
->fix
.line_length
= line_size
;
395 * It seems, you can't re-program the controller if it is still running.
396 * This may lead into shifted pictures (FIFO issue?).
397 * So, first stop the controller and drain its FIFOs
401 mxsfb_disable_controller(fb_info
);
404 /* clear the FIFOs */
405 writel(CTRL1_FIFO_CLEAR
, host
->base
+ LCDC_CTRL1
+ REG_SET
);
407 ctrl
= CTRL_BYPASS_COUNT
| CTRL_MASTER
|
408 CTRL_SET_BUS_WIDTH(host
->ld_intf_width
);
410 switch (fb_info
->var
.bits_per_pixel
) {
412 dev_dbg(&host
->pdev
->dev
, "Setting up RGB565 mode\n");
413 ctrl
|= CTRL_SET_WORD_LENGTH(0);
414 writel(CTRL1_SET_BYTE_PACKAGING(0xf), host
->base
+ LCDC_CTRL1
);
417 dev_dbg(&host
->pdev
->dev
, "Setting up RGB888/666 mode\n");
418 ctrl
|= CTRL_SET_WORD_LENGTH(3);
419 switch (host
->ld_intf_width
) {
421 dev_dbg(&host
->pdev
->dev
,
422 "Unsupported LCD bus width mapping\n");
426 /* 24 bit to 18 bit mapping */
427 ctrl
|= CTRL_DF24
; /* ignore the upper 2 bits in
428 * each colour component
435 /* do not use packed pixels = one pixel per word instead */
436 writel(CTRL1_SET_BYTE_PACKAGING(0x7), host
->base
+ LCDC_CTRL1
);
439 dev_dbg(&host
->pdev
->dev
, "Unhandled color depth of %u\n",
440 fb_info
->var
.bits_per_pixel
);
444 writel(ctrl
, host
->base
+ LCDC_CTRL
);
446 writel(TRANSFER_COUNT_SET_VCOUNT(fb_info
->var
.yres
) |
447 TRANSFER_COUNT_SET_HCOUNT(fb_info
->var
.xres
),
448 host
->base
+ host
->devdata
->transfer_count
);
450 vdctrl0
= VDCTRL0_ENABLE_PRESENT
| /* always in DOTCLOCK mode */
451 VDCTRL0_VSYNC_PERIOD_UNIT
|
452 VDCTRL0_VSYNC_PULSE_WIDTH_UNIT
|
453 VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info
->var
.vsync_len
);
454 if (fb_info
->var
.sync
& FB_SYNC_HOR_HIGH_ACT
)
455 vdctrl0
|= VDCTRL0_HSYNC_ACT_HIGH
;
456 if (fb_info
->var
.sync
& FB_SYNC_VERT_HIGH_ACT
)
457 vdctrl0
|= VDCTRL0_VSYNC_ACT_HIGH
;
458 if (fb_info
->var
.sync
& FB_SYNC_DATA_ENABLE_HIGH_ACT
)
459 vdctrl0
|= VDCTRL0_ENABLE_ACT_HIGH
;
460 if (fb_info
->var
.sync
& FB_SYNC_DOTCLK_FAILING_ACT
)
461 vdctrl0
|= VDCTRL0_DOTCLK_ACT_FAILING
;
463 writel(vdctrl0
, host
->base
+ LCDC_VDCTRL0
);
465 /* frame length in lines */
466 writel(fb_info
->var
.upper_margin
+ fb_info
->var
.vsync_len
+
467 fb_info
->var
.lower_margin
+ fb_info
->var
.yres
,
468 host
->base
+ LCDC_VDCTRL1
);
470 /* line length in units of clocks or pixels */
471 writel(set_hsync_pulse_width(host
, fb_info
->var
.hsync_len
) |
472 VDCTRL2_SET_HSYNC_PERIOD(fb_info
->var
.left_margin
+
473 fb_info
->var
.hsync_len
+ fb_info
->var
.right_margin
+
475 host
->base
+ LCDC_VDCTRL2
);
477 writel(SET_HOR_WAIT_CNT(fb_info
->var
.left_margin
+
478 fb_info
->var
.hsync_len
) |
479 SET_VERT_WAIT_CNT(fb_info
->var
.upper_margin
+
480 fb_info
->var
.vsync_len
),
481 host
->base
+ LCDC_VDCTRL3
);
483 vdctrl4
= SET_DOTCLK_H_VALID_DATA_CNT(fb_info
->var
.xres
);
484 if (mxsfb_is_v4(host
))
485 vdctrl4
|= VDCTRL4_SET_DOTCLK_DLY(host
->dotclk_delay
);
486 writel(vdctrl4
, host
->base
+ LCDC_VDCTRL4
);
488 writel(fb_info
->fix
.smem_start
+
489 fb_info
->fix
.line_length
* fb_info
->var
.yoffset
,
490 host
->base
+ host
->devdata
->next_buf
);
493 mxsfb_enable_controller(fb_info
);
498 static int mxsfb_setcolreg(u_int regno
, u_int red
, u_int green
, u_int blue
,
499 u_int transp
, struct fb_info
*fb_info
)
505 * If greyscale is true, then we convert the RGB value
506 * to greyscale no matter what visual we are using.
508 if (fb_info
->var
.grayscale
)
509 red
= green
= blue
= (19595 * red
+ 38470 * green
+
512 switch (fb_info
->fix
.visual
) {
513 case FB_VISUAL_TRUECOLOR
:
515 * 12 or 16-bit True Colour. We encode the RGB value
516 * according to the RGB bitfield information.
519 u32
*pal
= fb_info
->pseudo_palette
;
521 val
= chan_to_field(red
, &fb_info
->var
.red
);
522 val
|= chan_to_field(green
, &fb_info
->var
.green
);
523 val
|= chan_to_field(blue
, &fb_info
->var
.blue
);
530 case FB_VISUAL_STATIC_PSEUDOCOLOR
:
531 case FB_VISUAL_PSEUDOCOLOR
:
538 static int mxsfb_blank(int blank
, struct fb_info
*fb_info
)
540 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
543 case FB_BLANK_POWERDOWN
:
544 case FB_BLANK_VSYNC_SUSPEND
:
545 case FB_BLANK_HSYNC_SUSPEND
:
546 case FB_BLANK_NORMAL
:
548 mxsfb_disable_controller(fb_info
);
551 case FB_BLANK_UNBLANK
:
553 mxsfb_enable_controller(fb_info
);
559 static int mxsfb_pan_display(struct fb_var_screeninfo
*var
,
560 struct fb_info
*fb_info
)
562 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
565 if (var
->xoffset
!= 0)
568 offset
= fb_info
->fix
.line_length
* var
->yoffset
;
570 /* update on next VSYNC */
571 writel(fb_info
->fix
.smem_start
+ offset
,
572 host
->base
+ host
->devdata
->next_buf
);
577 static struct fb_ops mxsfb_ops
= {
578 .owner
= THIS_MODULE
,
579 .fb_check_var
= mxsfb_check_var
,
580 .fb_set_par
= mxsfb_set_par
,
581 .fb_setcolreg
= mxsfb_setcolreg
,
582 .fb_blank
= mxsfb_blank
,
583 .fb_pan_display
= mxsfb_pan_display
,
584 .fb_fillrect
= cfb_fillrect
,
585 .fb_copyarea
= cfb_copyarea
,
586 .fb_imageblit
= cfb_imageblit
,
589 static int __devinit
mxsfb_restore_mode(struct mxsfb_info
*host
)
591 struct fb_info
*fb_info
= &host
->fb_info
;
594 unsigned long pa
, fbsize
;
595 int bits_per_pixel
, ofs
;
596 u32 transfer_count
, vdctrl0
, vdctrl2
, vdctrl3
, vdctrl4
, ctrl
;
597 struct fb_videomode vmode
;
599 /* Only restore the mode when the controller is running */
600 ctrl
= readl(host
->base
+ LCDC_CTRL
);
601 if (!(ctrl
& CTRL_RUN
))
604 vdctrl0
= readl(host
->base
+ LCDC_VDCTRL0
);
605 vdctrl2
= readl(host
->base
+ LCDC_VDCTRL2
);
606 vdctrl3
= readl(host
->base
+ LCDC_VDCTRL3
);
607 vdctrl4
= readl(host
->base
+ LCDC_VDCTRL4
);
609 transfer_count
= readl(host
->base
+ host
->devdata
->transfer_count
);
611 vmode
.xres
= TRANSFER_COUNT_GET_HCOUNT(transfer_count
);
612 vmode
.yres
= TRANSFER_COUNT_GET_VCOUNT(transfer_count
);
614 switch (CTRL_GET_WORD_LENGTH(ctrl
)) {
625 fb_info
->var
.bits_per_pixel
= bits_per_pixel
;
627 vmode
.pixclock
= KHZ2PICOS(clk_get_rate(host
->clk
) / 1000U);
628 vmode
.hsync_len
= get_hsync_pulse_width(host
, vdctrl2
);
629 vmode
.left_margin
= GET_HOR_WAIT_CNT(vdctrl3
) - vmode
.hsync_len
;
630 vmode
.right_margin
= VDCTRL2_GET_HSYNC_PERIOD(vdctrl2
) - vmode
.hsync_len
-
631 vmode
.left_margin
- vmode
.xres
;
632 vmode
.vsync_len
= VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0
);
633 period
= readl(host
->base
+ LCDC_VDCTRL1
);
634 vmode
.upper_margin
= GET_VERT_WAIT_CNT(vdctrl3
) - vmode
.vsync_len
;
635 vmode
.lower_margin
= period
- vmode
.vsync_len
- vmode
.upper_margin
- vmode
.yres
;
637 vmode
.vmode
= FB_VMODE_NONINTERLACED
;
640 if (vdctrl0
& VDCTRL0_HSYNC_ACT_HIGH
)
641 vmode
.sync
|= FB_SYNC_HOR_HIGH_ACT
;
642 if (vdctrl0
& VDCTRL0_VSYNC_ACT_HIGH
)
643 vmode
.sync
|= FB_SYNC_VERT_HIGH_ACT
;
645 pr_debug("Reconstructed video mode:\n");
646 pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
647 vmode
.xres
, vmode
.yres
,
648 vmode
.hsync_len
, vmode
.left_margin
, vmode
.right_margin
,
649 vmode
.vsync_len
, vmode
.upper_margin
, vmode
.lower_margin
);
650 pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode
.pixclock
));
652 fb_add_videomode(&vmode
, &fb_info
->modelist
);
654 host
->ld_intf_width
= CTRL_GET_BUS_WIDTH(ctrl
);
655 host
->dotclk_delay
= VDCTRL4_GET_DOTCLK_DLY(vdctrl4
);
657 fb_info
->fix
.line_length
= vmode
.xres
* (bits_per_pixel
>> 3);
659 pa
= readl(host
->base
+ host
->devdata
->cur_buf
);
660 fbsize
= fb_info
->fix
.line_length
* vmode
.yres
;
661 if (pa
< fb_info
->fix
.smem_start
)
663 if (pa
+ fbsize
> fb_info
->fix
.smem_start
+ fb_info
->fix
.smem_len
)
665 ofs
= pa
- fb_info
->fix
.smem_start
;
667 memmove(fb_info
->screen_base
, fb_info
->screen_base
+ ofs
, fbsize
);
668 writel(fb_info
->fix
.smem_start
, host
->base
+ host
->devdata
->next_buf
);
671 line_count
= fb_info
->fix
.smem_len
/ fb_info
->fix
.line_length
;
672 fb_info
->fix
.ypanstep
= 1;
674 clk_prepare_enable(host
->clk
);
680 static int __devinit
mxsfb_init_fbinfo(struct mxsfb_info
*host
)
682 struct fb_info
*fb_info
= &host
->fb_info
;
683 struct fb_var_screeninfo
*var
= &fb_info
->var
;
684 struct mxsfb_platform_data
*pdata
= host
->pdev
->dev
.platform_data
;
687 unsigned fb_size
= pdata
->fb_size
;
689 fb_info
->fbops
= &mxsfb_ops
;
690 fb_info
->flags
= FBINFO_FLAG_DEFAULT
| FBINFO_READS_FAST
;
691 strlcpy(fb_info
->fix
.id
, "mxs", sizeof(fb_info
->fix
.id
));
692 fb_info
->fix
.type
= FB_TYPE_PACKED_PIXELS
;
693 fb_info
->fix
.ypanstep
= 1;
694 fb_info
->fix
.visual
= FB_VISUAL_TRUECOLOR
,
695 fb_info
->fix
.accel
= FB_ACCEL_NONE
;
697 var
->bits_per_pixel
= pdata
->default_bpp
? pdata
->default_bpp
: 16;
699 var
->activate
= FB_ACTIVATE_NOW
;
700 var
->accel_flags
= 0;
701 var
->vmode
= FB_VMODE_NONINTERLACED
;
703 host
->dotclk_delay
= pdata
->dotclk_delay
;
704 host
->ld_intf_width
= pdata
->ld_intf_width
;
706 /* Memory allocation for framebuffer */
707 if (pdata
->fb_phys
) {
711 fb_phys
= pdata
->fb_phys
;
713 if (!request_mem_region(fb_phys
, fb_size
, host
->pdev
->name
))
716 fb_virt
= ioremap(fb_phys
, fb_size
);
718 release_mem_region(fb_phys
, fb_size
);
724 fb_size
= SZ_2M
; /* default */
725 fb_virt
= alloc_pages_exact(fb_size
, GFP_DMA
);
729 fb_phys
= virt_to_phys(fb_virt
);
732 fb_info
->fix
.smem_start
= fb_phys
;
733 fb_info
->screen_base
= fb_virt
;
734 fb_info
->screen_size
= fb_info
->fix
.smem_len
= fb_size
;
736 if (mxsfb_restore_mode(host
))
737 memset(fb_virt
, 0, fb_size
);
742 static void __devexit
mxsfb_free_videomem(struct mxsfb_info
*host
)
744 struct fb_info
*fb_info
= &host
->fb_info
;
747 iounmap(fb_info
->screen_base
);
748 release_mem_region(fb_info
->fix
.smem_start
,
749 fb_info
->screen_size
);
751 free_pages_exact(fb_info
->screen_base
, fb_info
->fix
.smem_len
);
755 static struct platform_device_id mxsfb_devtype
[] = {
758 .driver_data
= MXSFB_V3
,
761 .driver_data
= MXSFB_V4
,
766 MODULE_DEVICE_TABLE(platform
, mxsfb_devtype
);
768 static const struct of_device_id mxsfb_dt_ids
[] = {
769 { .compatible
= "fsl,imx23-lcdif", .data
= &mxsfb_devtype
[0], },
770 { .compatible
= "fsl,imx28-lcdif", .data
= &mxsfb_devtype
[1], },
773 MODULE_DEVICE_TABLE(of
, mxsfb_dt_ids
);
775 static int __devinit
mxsfb_probe(struct platform_device
*pdev
)
777 const struct of_device_id
*of_id
=
778 of_match_device(mxsfb_dt_ids
, &pdev
->dev
);
779 struct mxsfb_platform_data
*pdata
= pdev
->dev
.platform_data
;
780 struct resource
*res
;
781 struct mxsfb_info
*host
;
782 struct fb_info
*fb_info
;
783 struct fb_modelist
*modelist
;
784 struct pinctrl
*pinctrl
;
786 enum of_gpio_flags flags
;
790 pdev
->id_entry
= of_id
->data
;
793 dev_err(&pdev
->dev
, "No platformdata. Giving up\n");
797 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
799 dev_err(&pdev
->dev
, "Cannot get memory IO resource\n");
803 if (!request_mem_region(res
->start
, resource_size(res
), pdev
->name
))
806 fb_info
= framebuffer_alloc(sizeof(struct mxsfb_info
), &pdev
->dev
);
808 dev_err(&pdev
->dev
, "Failed to allocate fbdev\n");
810 goto error_alloc_info
;
813 host
= to_imxfb_host(fb_info
);
815 host
->base
= ioremap(res
->start
, resource_size(res
));
817 dev_err(&pdev
->dev
, "ioremap failed\n");
823 platform_set_drvdata(pdev
, host
);
825 host
->devdata
= &mxsfb_devdata
[pdev
->id_entry
->driver_data
];
827 pinctrl
= devm_pinctrl_get_select_default(&pdev
->dev
);
828 if (IS_ERR(pinctrl
)) {
829 ret
= PTR_ERR(pinctrl
);
833 host
->clk
= clk_get(&host
->pdev
->dev
, NULL
);
834 if (IS_ERR(host
->clk
)) {
835 ret
= PTR_ERR(host
->clk
);
839 panel_enable
= of_get_named_gpio_flags(pdev
->dev
.of_node
,
840 "panel-enable-gpios", 0, &flags
);
841 if (gpio_is_valid(panel_enable
)) {
842 unsigned long f
= GPIOF_OUT_INIT_HIGH
;
843 if (flags
== OF_GPIO_ACTIVE_LOW
)
844 f
= GPIOF_OUT_INIT_LOW
;
845 ret
= devm_gpio_request_one(&pdev
->dev
, panel_enable
,
849 "failed to request gpio %d: %d\n",
851 goto error_panel_enable
;
855 fb_info
->pseudo_palette
= kmalloc(sizeof(u32
) * 16, GFP_KERNEL
);
856 if (!fb_info
->pseudo_palette
) {
858 goto error_pseudo_pallette
;
861 INIT_LIST_HEAD(&fb_info
->modelist
);
863 ret
= mxsfb_init_fbinfo(host
);
867 for (i
= 0; i
< pdata
->mode_count
; i
++)
868 fb_add_videomode(&pdata
->mode_list
[i
], &fb_info
->modelist
);
870 modelist
= list_first_entry(&fb_info
->modelist
,
871 struct fb_modelist
, list
);
872 fb_videomode_to_var(&fb_info
->var
, &modelist
->mode
);
874 /* init the color fields */
875 mxsfb_check_var(&fb_info
->var
, fb_info
);
877 platform_set_drvdata(pdev
, fb_info
);
879 ret
= register_framebuffer(fb_info
);
881 dev_err(&pdev
->dev
,"Failed to register framebuffer\n");
885 if (!host
->enabled
) {
886 writel(0, host
->base
+ LCDC_CTRL
);
887 mxsfb_set_par(fb_info
);
888 mxsfb_enable_controller(fb_info
);
891 dev_info(&pdev
->dev
, "initialized\n");
897 clk_disable_unprepare(host
->clk
);
898 fb_destroy_modelist(&fb_info
->modelist
);
900 kfree(fb_info
->pseudo_palette
);
901 error_pseudo_pallette
:
908 framebuffer_release(fb_info
);
910 release_mem_region(res
->start
, resource_size(res
));
915 static int __devexit
mxsfb_remove(struct platform_device
*pdev
)
917 struct fb_info
*fb_info
= platform_get_drvdata(pdev
);
918 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
919 struct resource
*res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
922 mxsfb_disable_controller(fb_info
);
924 unregister_framebuffer(fb_info
);
925 kfree(fb_info
->pseudo_palette
);
926 mxsfb_free_videomem(host
);
930 framebuffer_release(fb_info
);
931 release_mem_region(res
->start
, resource_size(res
));
933 platform_set_drvdata(pdev
, NULL
);
938 static void mxsfb_shutdown(struct platform_device
*pdev
)
940 struct fb_info
*fb_info
= platform_get_drvdata(pdev
);
941 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
944 * Force stop the LCD controller as keeping it running during reboot
945 * might interfere with the BootROM's boot mode pads sampling.
947 writel(CTRL_RUN
, host
->base
+ LCDC_CTRL
+ REG_CLR
);
950 static struct platform_driver mxsfb_driver
= {
951 .probe
= mxsfb_probe
,
952 .remove
= __devexit_p(mxsfb_remove
),
953 .shutdown
= mxsfb_shutdown
,
954 .id_table
= mxsfb_devtype
,
957 .of_match_table
= mxsfb_dt_ids
,
961 module_platform_driver(mxsfb_driver
);
963 MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
964 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
965 MODULE_LICENSE("GPL");