2 * Device Tree for DA850 EVM board
4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation, version 2.
12 #include <dt-bindings/gpio/gpio.h>
15 compatible = "ti,da850-evm", "ti,da850";
16 model = "DA850/AM1808/OMAP-L138 EVM";
26 pmx_core: pinmux@14120 {
29 mcasp0_pins: pinmux_mcasp0_pins {
30 pinctrl-single,bits = <
32 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
35 0x00 0x11111111 0xffffffff
37 0x04 0x00011000 0x000ff000
40 nand_pins: nand_pins {
41 pinctrl-single,bits = <
42 /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
43 0x1c 0x10110110 0xf0ff0ff0
45 * EMA_D[0], EMA_D[1], EMA_D[2],
46 * EMA_D[3], EMA_D[4], EMA_D[5],
49 0x24 0x11111111 0xffffffff
50 /* EMA_A[1], EMA_A[2] */
51 0x30 0x01100000 0x0ff00000
55 serial0: serial@42000 {
58 serial1: serial@10c000 {
61 serial2: serial@10d000 {
69 clock-frequency = <100000>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&i2c0_pins>;
76 tlv320aic3106: tlv320aic3106@18 {
77 #sound-dai-cells = <0>;
78 compatible = "ti,tlv320aic3106";
83 IOVDD-supply = <&vdcdc2_reg>;
84 /* Derived from VBAT: Baseboard 3.3V / 1.8V */
85 AVDD-supply = <&vbat>;
86 DRVDD-supply = <&vbat>;
87 DVDD-supply = <&vbat>;
90 compatible = "ti,tca6416";
100 max-frequency = <50000000>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&mmc0_pins>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
111 #address-cells = <1>;
113 compatible = "m25p64";
114 spi-max-frequency = <30000000>;
118 label = "U-Boot-SPL";
119 reg = <0x00000000 0x00010000>;
124 reg = <0x00010000 0x00080000>;
128 label = "U-Boot-Env";
129 reg = <0x00090000 0x00010000>;
134 reg = <0x000a0000 0x00280000>;
137 label = "Filesystem";
138 reg = <0x00320000 0x00400000>;
141 label = "MAC-Address";
142 reg = <0x007f0000 0x00010000>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&mdio_pins>;
151 bus_freq = <2200000>;
153 eth0: ethernet@220000 {
155 pinctrl-names = "default";
156 pinctrl-0 = <&mii_pins>;
162 vbat: fixedregulator0 {
163 compatible = "regulator-fixed";
164 regulator-name = "vbat";
165 regulator-min-microvolt = <5000000>;
166 regulator-max-microvolt = <5000000>;
171 compatible = "simple-audio-card";
172 simple-audio-card,name = "DA850/OMAP-L138 EVM";
173 simple-audio-card,widgets =
176 simple-audio-card,routing =
181 simple-audio-card,format = "dsp_b";
182 simple-audio-card,bitclock-master = <&link0_codec>;
183 simple-audio-card,frame-master = <&link0_codec>;
184 simple-audio-card,bitclock-inversion;
186 simple-audio-card,cpu {
187 sound-dai = <&mcasp0>;
188 system-clock-frequency = <24576000>;
191 link0_codec: simple-audio-card,codec {
192 sound-dai = <&tlv320aic3106>;
193 system-clock-frequency = <24576000>;
198 /include/ "tps6507x.dtsi"
201 vdcdc1_2-supply = <&vbat>;
202 vdcdc3-supply = <&vbat>;
203 vldo1_2-supply = <&vbat>;
206 vdcdc1_reg: regulator@0 {
207 regulator-name = "VDCDC1_3.3V";
208 regulator-min-microvolt = <3150000>;
209 regulator-max-microvolt = <3450000>;
214 vdcdc2_reg: regulator@1 {
215 regulator-name = "VDCDC2_3.3V";
216 regulator-min-microvolt = <1710000>;
217 regulator-max-microvolt = <3450000>;
220 ti,defdcdc_default = <1>;
223 vdcdc3_reg: regulator@2 {
224 regulator-name = "VDCDC3_1.2V";
225 regulator-min-microvolt = <950000>;
226 regulator-max-microvolt = <1350000>;
229 ti,defdcdc_default = <1>;
232 ldo1_reg: regulator@3 {
233 regulator-name = "LDO1_1.8V";
234 regulator-min-microvolt = <1710000>;
235 regulator-max-microvolt = <1890000>;
240 ldo2_reg: regulator@4 {
241 regulator-name = "LDO2_1.2V";
242 regulator-min-microvolt = <1140000>;
243 regulator-max-microvolt = <1320000>;
251 #sound-dai-cells = <0>;
253 pinctrl-names = "default";
254 pinctrl-0 = <&mcasp0_pins>;
256 op-mode = <0>; /* MCASP_IIS_MODE */
259 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
270 ti,edma-reserved-slot-ranges = <32 50>;
274 ti,edma-reserved-slot-ranges = <32 90>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&nand_pins>;
282 #address-cells = <2>;
287 ti,cs-chipselect = <3>;
290 compatible = "ti,davinci-nand";
291 #address-cells = <1>;
293 reg = <0 0x02000000 0x02000000
294 1 0x00000000 0x00008000>;
296 ti,davinci-chipselect = <1>;
297 ti,davinci-mask-ale = <0>;
298 ti,davinci-mask-cle = <0>;
299 ti,davinci-mask-chipsel = <0>;
300 ti,davinci-ecc-mode = "hw";
301 ti,davinci-ecc-bits = <4>;
302 ti,davinci-nand-use-bbt;
308 pinctrl-names = "default";
309 pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;