2 * Samsung's Exynos5250 based Arndale board device tree source
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/input/input.h>
16 #include "exynos5250.dtsi"
19 model = "Insignal Arndale evaluation board based on EXYNOS5250";
20 compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
23 device_type = "memory";
24 reg = <0x40000000 0x80000000>;
28 bootargs = "console=ttySAC2,115200";
32 compatible = "gpio-keys";
36 gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_MENU>;
43 gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_HOME>;
50 gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_UP>;
57 gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_DOWN>;
64 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_BACK>;
71 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_WAKEUP>;
78 compatible = "simple-bus";
82 main_dc_reg: regulator@0 {
83 compatible = "regulator-fixed";
85 regulator-name = "MAIN_DC";
88 mmc_reg: regulator@1 {
89 compatible = "regulator-fixed";
91 regulator-name = "VDD_33ON_2.8V";
92 regulator-min-microvolt = <2800000>;
93 regulator-max-microvolt = <2800000>;
94 gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
98 reg_hdmi_en: regulator@2 {
99 compatible = "regulator-fixed";
101 regulator-name = "hdmi-en";
107 compatible = "samsung,clock-xxti";
108 clock-frequency = <24000000>;
112 // SMSC USB3503 connected in hardware only mode as a PHY
114 compatible = "smsc,usb3503a";
116 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
117 connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
122 cpu0-supply = <&buck2_reg>;
127 samsung,color-space = <0>;
128 samsung,color-depth = <1>;
129 samsung,link-rate = <0x0a>;
130 samsung,lane-count = <4>;
133 native-mode = <&timing0>;
136 /* 2560x1600 DP panel */
137 clock-frequency = <50000>;
155 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
156 vdd_osc-supply = <&ldo10_reg>;
157 vdd_pll-supply = <&ldo8_reg>;
158 vdd-supply = <&ldo8_reg>;
163 samsung,i2c-sda-delay = <100>;
164 samsung,i2c-max-bus-freq = <20000>;
165 samsung,i2c-slave-addr = <0x66>;
168 compatible = "samsung,s5m8767-pmic";
170 interrupt-parent = <&gpx3>;
171 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
173 vinb1-supply = <&main_dc_reg>;
174 vinb2-supply = <&main_dc_reg>;
175 vinb3-supply = <&main_dc_reg>;
176 vinb4-supply = <&main_dc_reg>;
177 vinb5-supply = <&main_dc_reg>;
178 vinb6-supply = <&main_dc_reg>;
179 vinb7-supply = <&main_dc_reg>;
180 vinb8-supply = <&main_dc_reg>;
181 vinb9-supply = <&main_dc_reg>;
183 vinl1-supply = <&buck7_reg>;
184 vinl2-supply = <&buck7_reg>;
185 vinl3-supply = <&buck7_reg>;
186 vinl4-supply = <&main_dc_reg>;
187 vinl5-supply = <&main_dc_reg>;
188 vinl6-supply = <&main_dc_reg>;
189 vinl7-supply = <&main_dc_reg>;
190 vinl8-supply = <&buck8_reg>;
191 vinl9-supply = <&buck8_reg>;
193 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
194 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
195 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
196 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
197 <&gpd1 1 GPIO_ACTIVE_HIGH>,
198 <&gpd1 2 GPIO_ACTIVE_HIGH>;
199 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
200 <&gpx2 4 GPIO_ACTIVE_HIGH>,
201 <&gpx2 5 GPIO_ACTIVE_HIGH>;
205 regulator-name = "VDD_ALIVE_1.0V";
206 regulator-min-microvolt = <1100000>;
207 regulator-max-microvolt = <1100000>;
214 regulator-name = "VDD_28IO_DP_1.35V";
215 regulator-min-microvolt = <1200000>;
216 regulator-max-microvolt = <1200000>;
223 regulator-name = "VDD_COMMON1_1.8V";
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <1800000>;
232 regulator-name = "VDD_IOPERI_1.8V";
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
240 regulator-name = "VDD_EXT_1.8V";
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
249 regulator-name = "VDD_MPLL_1.1V";
250 regulator-min-microvolt = <1100000>;
251 regulator-max-microvolt = <1100000>;
258 regulator-name = "VDD_XPLL_1.1V";
259 regulator-min-microvolt = <1100000>;
260 regulator-max-microvolt = <1100000>;
267 regulator-name = "VDD_COMMON2_1.0V";
268 regulator-min-microvolt = <1000000>;
269 regulator-max-microvolt = <1000000>;
276 regulator-name = "VDD_33ON_3.0V";
277 regulator-min-microvolt = <3000000>;
278 regulator-max-microvolt = <3000000>;
283 regulator-name = "VDD_COMMON3_1.8V";
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
292 regulator-name = "VDD_ABB2_1.8V";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
301 regulator-name = "VDD_USB_3.0V";
302 regulator-min-microvolt = <3000000>;
303 regulator-max-microvolt = <3000000>;
310 regulator-name = "VDDQ_C2C_W_1.8V";
311 regulator-min-microvolt = <1800000>;
312 regulator-max-microvolt = <1800000>;
319 regulator-name = "VDD18_ABB0_3_1.8V";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
328 regulator-name = "VDD10_COMMON4_1.0V";
329 regulator-min-microvolt = <1000000>;
330 regulator-max-microvolt = <1000000>;
337 regulator-name = "VDD18_HSIC_1.8V";
338 regulator-min-microvolt = <1800000>;
339 regulator-max-microvolt = <1800000>;
346 regulator-name = "VDDQ_MMC2_3_2.8V";
347 regulator-min-microvolt = <2800000>;
348 regulator-max-microvolt = <2800000>;
355 regulator-name = "VDD_33ON_2.8V";
356 regulator-min-microvolt = <2800000>;
357 regulator-max-microvolt = <2800000>;
362 regulator-name = "EXT_33_OFF";
363 regulator-min-microvolt = <3300000>;
364 regulator-max-microvolt = <3300000>;
369 regulator-name = "EXT_28_OFF";
370 regulator-min-microvolt = <2800000>;
371 regulator-max-microvolt = <2800000>;
376 regulator-name = "PVDD_LDO25";
377 regulator-min-microvolt = <1200000>;
378 regulator-max-microvolt = <1200000>;
383 regulator-name = "EXT_18_OFF";
384 regulator-min-microvolt = <1800000>;
385 regulator-max-microvolt = <1800000>;
390 regulator-name = "vdd_mif";
391 regulator-min-microvolt = <950000>;
392 regulator-max-microvolt = <1200000>;
399 regulator-name = "vdd_arm";
400 regulator-min-microvolt = <912500>;
401 regulator-max-microvolt = <1300000>;
408 regulator-name = "vdd_int";
409 regulator-min-microvolt = <900000>;
410 regulator-max-microvolt = <1200000>;
417 regulator-name = "vdd_g3d";
418 regulator-min-microvolt = <1000000>;
419 regulator-max-microvolt = <1000000>;
426 regulator-name = "VDD_MEM_1.35V";
427 regulator-min-microvolt = <750000>;
428 regulator-max-microvolt = <1355000>;
435 regulator-name = "PVDD_BUCK7";
441 regulator-name = "PVDD_BUCK8";
447 regulator-name = "VDD_33_OFF_EXT1";
448 regulator-min-microvolt = <750000>;
449 regulator-max-microvolt = <3000000>;
459 samsung,i2c-sda-delay = <100>;
460 samsung,i2c-max-bus-freq = <66000>;
461 samsung,i2c-slave-addr = <0x50>;
464 compatible = "samsung,exynos4210-hdmiddc";
473 compatible = "wlf,wm1811";
476 AVDD2-supply = <&main_dc_reg>;
477 CPVDD-supply = <&main_dc_reg>;
478 DBVDD1-supply = <&main_dc_reg>;
479 DBVDD2-supply = <&main_dc_reg>;
480 DBVDD3-supply = <&main_dc_reg>;
481 LDO1VDD-supply = <&main_dc_reg>;
482 SPKVDD1-supply = <&main_dc_reg>;
483 SPKVDD2-supply = <&main_dc_reg>;
485 wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
486 wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
493 samsung,i2c-sda-delay = <100>;
494 samsung,i2c-max-bus-freq = <66000>;
495 samsung,i2c-slave-addr = <0x38>;
498 compatible = "samsung,exynos4212-hdmiphy";
505 samsung,i2c-sda-delay = <100>;
506 samsung,i2c-max-bus-freq = <40000>;
507 samsung,i2c-slave-addr = <0x38>;
509 sata_phy_i2c:sata-phy@38 {
510 compatible = "samsung,exynos-sataphy-i2c";
522 card-detect-delay = <200>;
523 samsung,dw-mshc-ciu-div = <3>;
524 samsung,dw-mshc-sdr-timing = <2 3>;
525 samsung,dw-mshc-ddr-timing = <1 2>;
526 vmmc-supply = <&mmc_reg>;
527 pinctrl-names = "default";
528 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
535 card-detect-delay = <200>;
536 samsung,dw-mshc-ciu-div = <3>;
537 samsung,dw-mshc-sdr-timing = <2 3>;
538 samsung,dw-mshc-ddr-timing = <1 2>;
539 vmmc-supply = <&mmc_reg>;
540 pinctrl-names = "default";
541 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
557 samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;