drivers/usb/host/ohci-hub.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * This file is licenced under GPL
   8  */
   9
  10 /*-------------------------------------------------------------------------*/
  11
  12 /*
  13  * OHCI Root Hub ... the nonsharable stuff
  14  */
  15
  16 #define dbg_port(hc,label,num,value) \
  17         ohci_dbg (hc, \
  18                 "%s roothub.portstatus [%d] " \
  19                 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
  20                 label, num, temp, \
  21                 (temp & RH_PS_PRSC) ? " PRSC" : "", \
  22                 (temp & RH_PS_OCIC) ? " OCIC" : "", \
  23                 (temp & RH_PS_PSSC) ? " PSSC" : "", \
  24                 (temp & RH_PS_PESC) ? " PESC" : "", \
  25                 (temp & RH_PS_CSC) ? " CSC" : "", \
  26                 \
  27                 (temp & RH_PS_LSDA) ? " LSDA" : "", \
  28                 (temp & RH_PS_PPS) ? " PPS" : "", \
  29                 (temp & RH_PS_PRS) ? " PRS" : "", \
  30                 (temp & RH_PS_POCI) ? " POCI" : "", \
  31                 (temp & RH_PS_PSS) ? " PSS" : "", \
  32                 \
  33                 (temp & RH_PS_PES) ? " PES" : "", \
  34                 (temp & RH_PS_CCS) ? " CCS" : "" \
  35                 );
  36
  37 /*-------------------------------------------------------------------------*/
  38
  39 #define OHCI_SCHED_ENABLES \
  40         (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
  41
  42 static void dl_done_list (struct ohci_hcd *);
  43 static void finish_unlinks (struct ohci_hcd *, u16);
  44
  45 #ifdef  CONFIG_PM
  46 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
  47 __releases(ohci->lock)
  48 __acquires(ohci->lock)
  49 {
  50         int                     status = 0;
  51
  52         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  53         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
  54         case OHCI_USB_RESUME:
  55                 ohci_dbg (ohci, "resume/suspend?\n");
  56                 ohci->hc_control &= ~OHCI_CTRL_HCFS;
  57                 ohci->hc_control |= OHCI_USB_RESET;
  58                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  59                 (void) ohci_readl (ohci, &ohci->regs->control);
  60                 /* FALL THROUGH */
  61         case OHCI_USB_RESET:
  62                 status = -EBUSY;
  63                 ohci_dbg (ohci, "needs reinit!\n");
  64                 goto done;
  65         case OHCI_USB_SUSPEND:
  66                 if (!ohci->autostop) {
  67                         ohci_dbg (ohci, "already suspended\n");
  68                         goto done;
  69                 }
  70         }
  71         ohci_dbg (ohci, "%s root hub\n",
  72                         autostop ? "auto-stop" : "suspend");
  73
  74         /* First stop any processing */
  75         if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
  76                 ohci->hc_control &= ~OHCI_SCHED_ENABLES;
  77                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  78                 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  79                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
  80
  81                 /* sched disables take effect on the next frame,
  82                  * then the last WDH could take 6+ msec
  83                  */
  84                 ohci_dbg (ohci, "stopping schedules ...\n");
  85                 ohci->autostop = 0;
  86                 spin_unlock_irq (&ohci->lock);
  87                 msleep (8);
  88                 spin_lock_irq (&ohci->lock);
  89         }
  90         dl_done_list (ohci);
  91         finish_unlinks (ohci, ohci_frame_no(ohci));
  92
  93         /*
  94          * Some controllers don't handle "global" suspend properly if
  95          * there are unsuspended ports.  For these controllers, put all
  96          * the enabled ports into suspend before suspending the root hub.
  97          */
  98         if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) {
  99                 __hc32 __iomem  *portstat = ohci->regs->roothub.portstatus;
 100                 int             i;
 101                 unsigned        temp;
 102
 103                 for (i = 0; i < ohci->num_ports; (++i, ++portstat)) {
 104                         temp = ohci_readl(ohci, portstat);
 105                         if ((temp & (RH_PS_PES | RH_PS_PSS)) ==
 106                                         RH_PS_PES)
 107                                 ohci_writel(ohci, RH_PS_PSS, portstat);
 108                 }
 109         }
 110
 111         /* maybe resume can wake root hub */
 112         if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
 113                 ohci->hc_control |= OHCI_CTRL_RWE;
 114         } else {
 115                 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
 116                                 &ohci->regs->intrdisable);
 117                 ohci->hc_control &= ~OHCI_CTRL_RWE;
 118         }
 119
 120         /* Suspend hub ... this is the "global (to this bus) suspend" mode,
 121          * which doesn't imply ports will first be individually suspended.
 122          */
 123         ohci->hc_control &= ~OHCI_CTRL_HCFS;
 124         ohci->hc_control |= OHCI_USB_SUSPEND;
 125         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 126         (void) ohci_readl (ohci, &ohci->regs->control);
 127
 128         /* no resumes until devices finish suspending */
 129         if (!autostop) {
 130                 ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 131                 ohci->autostop = 0;
 132                 ohci->rh_state = OHCI_RH_SUSPENDED;
 133         }
 134
 135 done:
 136         return status;
 137 }
 138
 139 static inline struct ed *find_head (struct ed *ed)
 140 {
 141         /* for bulk and control lists */
 142         while (ed->ed_prev)
 143                 ed = ed->ed_prev;
 144         return ed;
 145 }
 146
 147 /* caller has locked the root hub */
 148 static int ohci_rh_resume (struct ohci_hcd *ohci)
 149 __releases(ohci->lock)
 150 __acquires(ohci->lock)
 151 {
 152         struct usb_hcd          *hcd = ohci_to_hcd (ohci);
 153         u32                     temp, enables;
 154         int                     status = -EINPROGRESS;
 155         int                     autostopped = ohci->autostop;
 156
 157         ohci->autostop = 0;
 158         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 159
 160         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 161                 /* this can happen after resuming a swsusp snapshot */
 162                 if (ohci->rh_state != OHCI_RH_RUNNING) {
 163                         ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
 164                                         ohci->hc_control);
 165                         status = -EBUSY;
 166                 /* this happens when pmcore resumes HC then root */
 167                 } else {
 168                         ohci_dbg (ohci, "duplicate resume\n");
 169                         status = 0;
 170                 }
 171         } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 172         case OHCI_USB_SUSPEND:
 173                 ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
 174                 ohci->hc_control |= OHCI_USB_RESUME;
 175                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 176                 (void) ohci_readl (ohci, &ohci->regs->control);
 177                 ohci_dbg (ohci, "%s root hub\n",
 178                                 autostopped ? "auto-start" : "resume");
 179                 break;
 180         case OHCI_USB_RESUME:
 181                 /* HCFS changes sometime after INTR_RD */
 182                 ohci_dbg(ohci, "%swakeup root hub\n",
 183                                 autostopped ? "auto-" : "");
 184                 break;
 185         case OHCI_USB_OPER:
 186                 /* this can happen after resuming a swsusp snapshot */
 187                 ohci_dbg (ohci, "snapshot resume? reinit\n");
 188                 status = -EBUSY;
 189                 break;
 190         default:                /* RESET, we lost power */
 191                 ohci_dbg (ohci, "lost power\n");
 192                 status = -EBUSY;
 193         }
 194         if (status == -EBUSY) {
 195                 if (!autostopped) {
 196                         spin_unlock_irq (&ohci->lock);
 197                         status = ohci_restart (ohci);
 198
 199                         usb_root_hub_lost_power(hcd->self.root_hub);
 200
 201                         spin_lock_irq (&ohci->lock);
 202                 }
 203                 return status;
 204         }
 205         if (status != -EINPROGRESS)
 206                 return status;
 207         if (autostopped)
 208                 goto skip_resume;
 209         spin_unlock_irq (&ohci->lock);
 210
 211         /* Some controllers (lucent erratum) need extra-long delays */
 212         msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 213
 214         temp = ohci_readl (ohci, &ohci->regs->control);
 215         temp &= OHCI_CTRL_HCFS;
 216         if (temp != OHCI_USB_RESUME) {
 217                 ohci_err (ohci, "controller won't resume\n");
 218                 spin_lock_irq(&ohci->lock);
 219                 return -EBUSY;
 220         }
 221
 222         /* disable old schedule state, reinit from scratch */
 223         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 224         ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
 225         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 226         ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
 227         ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
 228         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 229
 230         /* Sometimes PCI D3 suspend trashes frame timings ... */
 231         periodic_reinit (ohci);
 232
 233         /*
 234          * The following code is executed with ohci->lock held and
 235          * irqs disabled if and only if autostopped is true.  This
 236          * will cause sparse to warn about a "context imbalance".
 237          */
 238 skip_resume:
 239         /* interrupts might have been disabled */
 240         ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
 241         if (ohci->ed_rm_list)
 242                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
 243
 244         /* Then re-enable operations */
 245         ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
 246         (void) ohci_readl (ohci, &ohci->regs->control);
 247         if (!autostopped)
 248                 msleep (3);
 249
 250         temp = ohci->hc_control;
 251         temp &= OHCI_CTRL_RWC;
 252         temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 253         ohci->hc_control = temp;
 254         ohci_writel (ohci, temp, &ohci->regs->control);
 255         (void) ohci_readl (ohci, &ohci->regs->control);
 256
 257         /* TRSMRCY */
 258         if (!autostopped) {
 259                 msleep (10);
 260                 spin_lock_irq (&ohci->lock);
 261         }
 262         /* now ohci->lock is always held and irqs are always disabled */
 263
 264         /* keep it alive for more than ~5x suspend + resume costs */
 265         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 266
 267         /* maybe turn schedules back on */
 268         enables = 0;
 269         temp = 0;
 270         if (!ohci->ed_rm_list) {
 271                 if (ohci->ed_controltail) {
 272                         ohci_writel (ohci,
 273                                         find_head (ohci->ed_controltail)->dma,
 274                                         &ohci->regs->ed_controlhead);
 275                         enables |= OHCI_CTRL_CLE;
 276                         temp |= OHCI_CLF;
 277                 }
 278                 if (ohci->ed_bulktail) {
 279                         ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
 280                                 &ohci->regs->ed_bulkhead);
 281                         enables |= OHCI_CTRL_BLE;
 282                         temp |= OHCI_BLF;
 283                 }
 284         }
 285         if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
 286                 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
 287         if (enables) {
 288                 ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
 289                 ohci->hc_control |= enables;
 290                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 291                 if (temp)
 292                         ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
 293                 (void) ohci_readl (ohci, &ohci->regs->control);
 294         }
 295
 296         ohci->rh_state = OHCI_RH_RUNNING;
 297         return 0;
 298 }
 299
 300 static int ohci_bus_suspend (struct usb_hcd *hcd)
 301 {
 302         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 303         int                     rc;
 304
 305         spin_lock_irq (&ohci->lock);
 306
 307         if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 308                 rc = -ESHUTDOWN;
 309         else
 310                 rc = ohci_rh_suspend (ohci, 0);
 311         spin_unlock_irq (&ohci->lock);
 312         return rc;
 313 }
 314
 315 static int ohci_bus_resume (struct usb_hcd *hcd)
 316 {
 317         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 318         int                     rc;
 319
 320         if (time_before (jiffies, ohci->next_statechange))
 321                 msleep(5);
 322
 323         spin_lock_irq (&ohci->lock);
 324
 325         if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 326                 rc = -ESHUTDOWN;
 327         else
 328                 rc = ohci_rh_resume (ohci);
 329         spin_unlock_irq (&ohci->lock);
 330
 331         /* poll until we know a device is connected or we autostop */
 332         if (rc == 0)
 333                 usb_hcd_poll_rh_status(hcd);
 334         return rc;
 335 }
 336
 337 /* Carry out polling-, autostop-, and autoresume-related state changes */
 338 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 339                 int any_connected, int rhsc_status)
 340 {
 341         int     poll_rh = 1;
 342         int     rhsc_enable;
 343
 344         /* Some broken controllers never turn off RHSC in the interrupt
 345          * status register.  For their sake we won't re-enable RHSC
 346          * interrupts if the interrupt bit is already active.
 347          */
 348         rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
 349                         OHCI_INTR_RHSC;
 350
 351         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 352         case OHCI_USB_OPER:
 353                 /* If no status changes are pending, enable RHSC interrupts. */
 354                 if (!rhsc_enable && !rhsc_status && !changed) {
 355                         rhsc_enable = OHCI_INTR_RHSC;
 356                         ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
 357                 }
 358
 359                 /* Keep on polling until we know a device is connected
 360                  * and RHSC is enabled, or until we autostop.
 361                  */
 362                 if (!ohci->autostop) {
 363                         if (any_connected ||
 364                                         !device_may_wakeup(&ohci_to_hcd(ohci)
 365                                                 ->self.root_hub->dev)) {
 366                                 if (rhsc_enable)
 367                                         poll_rh = 0;
 368                         } else {
 369                                 ohci->autostop = 1;
 370                                 ohci->next_statechange = jiffies + HZ;
 371                         }
 372
 373                 /* if no devices have been attached for one second, autostop */
 374                 } else {
 375                         if (changed || any_connected) {
 376                                 ohci->autostop = 0;
 377                                 ohci->next_statechange = jiffies +
 378                                                 STATECHANGE_DELAY;
 379                         } else if (time_after_eq(jiffies,
 380                                                 ohci->next_statechange)
 381                                         && !ohci->ed_rm_list
 382                                         && !(ohci->hc_control &
 383                                                 OHCI_SCHED_ENABLES)) {
 384                                 ohci_rh_suspend(ohci, 1);
 385                                 if (rhsc_enable)
 386                                         poll_rh = 0;
 387                         }
 388                 }
 389                 break;
 390
 391         case OHCI_USB_SUSPEND:
 392         case OHCI_USB_RESUME:
 393                 /* if there is a port change, autostart or ask to be resumed */
 394                 if (changed) {
 395                         if (ohci->autostop)
 396                                 ohci_rh_resume(ohci);
 397                         else
 398                                 usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 399
 400                 /* If remote wakeup is disabled, stop polling */
 401                 } else if (!ohci->autostop &&
 402                                 !ohci_to_hcd(ohci)->self.root_hub->
 403                                         do_remote_wakeup) {
 404                         poll_rh = 0;
 405
 406                 } else {
 407                         /* If no status changes are pending,
 408                          * enable RHSC interrupts
 409                          */
 410                         if (!rhsc_enable && !rhsc_status) {
 411                                 rhsc_enable = OHCI_INTR_RHSC;
 412                                 ohci_writel(ohci, rhsc_enable,
 413                                                 &ohci->regs->intrenable);
 414                         }
 415                         /* Keep polling until RHSC is enabled */
 416                         if (rhsc_enable)
 417                                 poll_rh = 0;
 418                 }
 419                 break;
 420         }
 421         return poll_rh;
 422 }
 423
 424 #else   /* CONFIG_PM */
 425
 426 static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 427 {
 428         return 0;
 429 }
 430
 431 /* Carry out polling-related state changes.
 432  * autostop isn't used when CONFIG_PM is turned off.
 433  */
 434 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 435                 int any_connected, int rhsc_status)
 436 {
 437         /* If RHSC is enabled, don't poll */
 438         if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
 439                 return 0;
 440
 441         /* If status changes are pending, continue polling.
 442          * Conversely, if no status changes are pending but the RHSC
 443          * status bit was set, then RHSC may be broken so continue polling.
 444          */
 445         if (changed || rhsc_status)
 446                 return 1;
 447
 448         /* It's safe to re-enable RHSC interrupts */
 449         ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
 450         return 0;
 451 }
 452
 453 #endif  /* CONFIG_PM */
 454
 455 /*-------------------------------------------------------------------------*/
 456
 457 /* build "status change" packet (one or two bytes) from HC registers */
 458
 459 static int
 460 ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 461 {
 462         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 463         int             i, changed = 0, length = 1;
 464         int             any_connected = 0;
 465         int             rhsc_status;
 466         unsigned long   flags;
 467
 468         spin_lock_irqsave (&ohci->lock, flags);
 469         if (!HCD_HW_ACCESSIBLE(hcd))
 470                 goto done;
 471
 472         /* undocumented erratum seen on at least rev D */
 473         if ((ohci->flags & OHCI_QUIRK_AMD756)
 474                         && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
 475                 ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
 476                           ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
 477                 /* retry later; "should not happen" */
 478                 goto done;
 479         }
 480
 481         /* init status */
 482         if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
 483                 buf [0] = changed = 1;
 484         else
 485                 buf [0] = 0;
 486         if (ohci->num_ports > 7) {
 487                 buf [1] = 0;
 488                 length++;
 489         }
 490
 491         /* Clear the RHSC status flag before reading the port statuses */
 492         ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus);
 493         rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
 494                         OHCI_INTR_RHSC;
 495
 496         /* look at each port */
 497         for (i = 0; i < ohci->num_ports; i++) {
 498                 u32     status = roothub_portstatus (ohci, i);
 499
 500                 /* can't autostop if ports are connected */
 501                 any_connected |= (status & RH_PS_CCS);
 502
 503                 if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
 504                                 | RH_PS_OCIC | RH_PS_PRSC)) {
 505                         changed = 1;
 506                         if (i < 7)
 507                             buf [0] |= 1 << (i + 1);
 508                         else
 509                             buf [1] |= 1 << (i - 7);
 510                 }
 511         }
 512
 513         if (ohci_root_hub_state_changes(ohci, changed,
 514                         any_connected, rhsc_status))
 515                 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 516         else
 517                 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 518
 519
 520 done:
 521         spin_unlock_irqrestore (&ohci->lock, flags);
 522
 523         return changed ? length : 0;
 524 }
 525
 526 /*-------------------------------------------------------------------------*/
 527
 528 static void
 529 ohci_hub_descriptor (
 530         struct ohci_hcd                 *ohci,
 531         struct usb_hub_descriptor       *desc
 532 ) {
 533         u32             rh = roothub_a (ohci);
 534         u16             temp;
 535
 536         desc->bDescriptorType = 0x29;
 537         desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
 538         desc->bHubContrCurrent = 0;
 539
 540         desc->bNbrPorts = ohci->num_ports;
 541         temp = 1 + (ohci->num_ports / 8);
 542         desc->bDescLength = 7 + 2 * temp;
 543
 544         temp = 0;
 545         if (rh & RH_A_NPS)              /* no power switching? */
 546             temp |= 0x0002;
 547         if (rh & RH_A_PSM)              /* per-port power switching? */
 548             temp |= 0x0001;
 549         if (rh & RH_A_NOCP)             /* no overcurrent reporting? */
 550             temp |= 0x0010;
 551         else if (rh & RH_A_OCPM)        /* per-port overcurrent reporting? */
 552             temp |= 0x0008;
 553         desc->wHubCharacteristics = cpu_to_le16(temp);
 554
 555         /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 556         rh = roothub_b (ohci);
 557         memset(desc->u.hs.DeviceRemovable, 0xff,
 558                         sizeof(desc->u.hs.DeviceRemovable));
 559         desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR;
 560         if (ohci->num_ports > 7) {
 561                 desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8;
 562                 desc->u.hs.DeviceRemovable[2] = 0xff;
 563         } else
 564                 desc->u.hs.DeviceRemovable[1] = 0xff;
 565 }
 566
 567 /*-------------------------------------------------------------------------*/
 568
 569 #ifdef  CONFIG_USB_OTG
 570
 571 static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 572 {
 573         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 574         u32                     status;
 575
 576         if (!port)
 577                 return -EINVAL;
 578         port--;
 579
 580         /* start port reset before HNP protocol times out */
 581         status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
 582         if (!(status & RH_PS_CCS))
 583                 return -ENODEV;
 584
 585         /* khubd will finish the reset later */
 586         ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
 587         return 0;
 588 }
 589
 590 #else
 591
 592 #define ohci_start_port_reset           NULL
 593
 594 #endif
 595
 596 /*-------------------------------------------------------------------------*/
 597
 598
 599 /* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
 600  * not necessarily continuous ... to guard against resume signaling.
 601  */
 602 #define PORT_RESET_MSEC         50
 603
 604 /* this timer value might be vendor-specific ... */
 605 #define PORT_RESET_HW_MSEC      10
 606
 607 /* wrap-aware logic morphed from <linux/jiffies.h> */
 608 #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
 609
 610 /* called from some task, normally khubd */
 611 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 612 {
 613         __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
 614         u32     temp = 0;
 615         u16     now = ohci_readl(ohci, &ohci->regs->fmnumber);
 616         u16     reset_done = now + PORT_RESET_MSEC;
 617         int     limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
 618
 619         /* build a "continuous enough" reset signal, with up to
 620          * 3msec gap between pulses.  scheduler HZ==100 must work;
 621          * this might need to be deadline-scheduled.
 622          */
 623         do {
 624                 int limit_2;
 625
 626                 /* spin until any current reset finishes */
 627                 limit_2 = PORT_RESET_HW_MSEC * 2;
 628                 while (--limit_2 >= 0) {
 629                         temp = ohci_readl (ohci, portstat);
 630                         /* handle e.g. CardBus eject */
 631                         if (temp == ~(u32)0)
 632                                 return -ESHUTDOWN;
 633                         if (!(temp & RH_PS_PRS))
 634                                 break;
 635                         udelay (500);
 636                 }
 637
 638                 /* timeout (a hardware error) has been observed when
 639                  * EHCI sets CF while this driver is resetting a port;
 640                  * presumably other disconnect paths might do it too.
 641                  */
 642                 if (limit_2 < 0) {
 643                         ohci_dbg(ohci,
 644                                 "port[%d] reset timeout, stat %08x\n",
 645                                 port, temp);
 646                         break;
 647                 }
 648
 649                 if (!(temp & RH_PS_CCS))
 650                         break;
 651                 if (temp & RH_PS_PRSC)
 652                         ohci_writel (ohci, RH_PS_PRSC, portstat);
 653
 654                 /* start the next reset, sleep till it's probably done */
 655                 ohci_writel (ohci, RH_PS_PRS, portstat);
 656                 msleep(PORT_RESET_HW_MSEC);
 657                 now = ohci_readl(ohci, &ohci->regs->fmnumber);
 658         } while (tick_before(now, reset_done) && --limit_1 >= 0);
 659
 660         /* caller synchronizes using PRSC ... and handles PRS
 661          * still being set when this returns.
 662          */
 663
 664         return 0;
 665 }
 666
 667 static int ohci_hub_control (
 668         struct usb_hcd  *hcd,
 669         u16             typeReq,
 670         u16             wValue,
 671         u16             wIndex,
 672         char            *buf,
 673         u16             wLength
 674 ) {
 675         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 676         int             ports = ohci->num_ports;
 677         u32             temp;
 678         int             retval = 0;
 679
 680         if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
 681                 return -ESHUTDOWN;
 682
 683         switch (typeReq) {
 684         case ClearHubFeature:
 685                 switch (wValue) {
 686                 case C_HUB_OVER_CURRENT:
 687                         ohci_writel (ohci, RH_HS_OCIC,
 688                                         &ohci->regs->roothub.status);
 689                 case C_HUB_LOCAL_POWER:
 690                         break;
 691                 default:
 692                         goto error;
 693                 }
 694                 break;
 695         case ClearPortFeature:
 696                 if (!wIndex || wIndex > ports)
 697                         goto error;
 698                 wIndex--;
 699
 700                 switch (wValue) {
 701                 case USB_PORT_FEAT_ENABLE:
 702                         temp = RH_PS_CCS;
 703                         break;
 704                 case USB_PORT_FEAT_C_ENABLE:
 705                         temp = RH_PS_PESC;
 706                         break;
 707                 case USB_PORT_FEAT_SUSPEND:
 708                         temp = RH_PS_POCI;
 709                         break;
 710                 case USB_PORT_FEAT_C_SUSPEND:
 711                         temp = RH_PS_PSSC;
 712                         break;
 713                 case USB_PORT_FEAT_POWER:
 714                         temp = RH_PS_LSDA;
 715                         break;
 716                 case USB_PORT_FEAT_C_CONNECTION:
 717                         temp = RH_PS_CSC;
 718                         break;
 719                 case USB_PORT_FEAT_C_OVER_CURRENT:
 720                         temp = RH_PS_OCIC;
 721                         break;
 722                 case USB_PORT_FEAT_C_RESET:
 723                         temp = RH_PS_PRSC;
 724                         break;
 725                 default:
 726                         goto error;
 727                 }
 728                 ohci_writel (ohci, temp,
 729                                 &ohci->regs->roothub.portstatus [wIndex]);
 730                 // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
 731                 break;
 732         case GetHubDescriptor:
 733                 ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
 734                 break;
 735         case GetHubStatus:
 736                 temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
 737                 put_unaligned_le32(temp, buf);
 738                 break;
 739         case GetPortStatus:
 740                 if (!wIndex || wIndex > ports)
 741                         goto error;
 742                 wIndex--;
 743                 temp = roothub_portstatus (ohci, wIndex);
 744                 put_unaligned_le32(temp, buf);
 745
 746                 if (*(u16*)(buf+2))     /* only if wPortChange is interesting */
 747                         dbg_port(ohci, "GetStatus", wIndex, temp);
 748                 break;
 749         case SetHubFeature:
 750                 switch (wValue) {
 751                 case C_HUB_OVER_CURRENT:
 752                         // FIXME:  this can be cleared, yes?
 753                 case C_HUB_LOCAL_POWER:
 754                         break;
 755                 default:
 756                         goto error;
 757                 }
 758                 break;
 759         case SetPortFeature:
 760                 if (!wIndex || wIndex > ports)
 761                         goto error;
 762                 wIndex--;
 763                 switch (wValue) {
 764                 case USB_PORT_FEAT_SUSPEND:
 765 #ifdef  CONFIG_USB_OTG
 766                         if (hcd->self.otg_port == (wIndex + 1)
 767                                         && hcd->self.b_hnp_enable)
 768                                 ohci->start_hnp(ohci);
 769                         else
 770 #endif
 771                         ohci_writel (ohci, RH_PS_PSS,
 772                                 &ohci->regs->roothub.portstatus [wIndex]);
 773                         break;
 774                 case USB_PORT_FEAT_POWER:
 775                         ohci_writel (ohci, RH_PS_PPS,
 776                                 &ohci->regs->roothub.portstatus [wIndex]);
 777                         break;
 778                 case USB_PORT_FEAT_RESET:
 779                         retval = root_port_reset (ohci, wIndex);
 780                         break;
 781                 default:
 782                         goto error;
 783                 }
 784                 break;
 785
 786         default:
 787 error:
 788                 /* "protocol stall" on error */
 789                 retval = -EPIPE;
 790         }
 791         return retval;
 792 }
 793