Merge tag 'nfs-for-3.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
[linux/fpc-iii.git] / drivers / spi / spi-falcon.c
blobc7a74f0ef89285eb2f14926dd979145987509dc6
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
6 * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
7 */
9 #include <linux/module.h>
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/spi/spi.h>
13 #include <linux/delay.h>
14 #include <linux/workqueue.h>
15 #include <linux/of.h>
16 #include <linux/of_platform.h>
18 #include <lantiq_soc.h>
20 #define DRV_NAME "sflash-falcon"
22 #define FALCON_SPI_XFER_BEGIN (1 << 0)
23 #define FALCON_SPI_XFER_END (1 << 1)
25 /* Bus Read Configuration Register0 */
26 #define BUSRCON0 0x00000010
27 /* Bus Write Configuration Register0 */
28 #define BUSWCON0 0x00000018
29 /* Serial Flash Configuration Register */
30 #define SFCON 0x00000080
31 /* Serial Flash Time Register */
32 #define SFTIME 0x00000084
33 /* Serial Flash Status Register */
34 #define SFSTAT 0x00000088
35 /* Serial Flash Command Register */
36 #define SFCMD 0x0000008C
37 /* Serial Flash Address Register */
38 #define SFADDR 0x00000090
39 /* Serial Flash Data Register */
40 #define SFDATA 0x00000094
41 /* Serial Flash I/O Control Register */
42 #define SFIO 0x00000098
43 /* EBU Clock Control Register */
44 #define EBUCC 0x000000C4
46 /* Dummy Phase Length */
47 #define SFCMD_DUMLEN_OFFSET 16
48 #define SFCMD_DUMLEN_MASK 0x000F0000
49 /* Chip Select */
50 #define SFCMD_CS_OFFSET 24
51 #define SFCMD_CS_MASK 0x07000000
52 /* field offset */
53 #define SFCMD_ALEN_OFFSET 20
54 #define SFCMD_ALEN_MASK 0x00700000
55 /* SCK Rise-edge Position */
56 #define SFTIME_SCKR_POS_OFFSET 8
57 #define SFTIME_SCKR_POS_MASK 0x00000F00
58 /* SCK Period */
59 #define SFTIME_SCK_PER_OFFSET 0
60 #define SFTIME_SCK_PER_MASK 0x0000000F
61 /* SCK Fall-edge Position */
62 #define SFTIME_SCKF_POS_OFFSET 12
63 #define SFTIME_SCKF_POS_MASK 0x0000F000
64 /* Device Size */
65 #define SFCON_DEV_SIZE_A23_0 0x03000000
66 #define SFCON_DEV_SIZE_MASK 0x0F000000
67 /* Read Data Position */
68 #define SFTIME_RD_POS_MASK 0x000F0000
69 /* Data Output */
70 #define SFIO_UNUSED_WD_MASK 0x0000000F
71 /* Command Opcode mask */
72 #define SFCMD_OPC_MASK 0x000000FF
73 /* dlen bytes of data to write */
74 #define SFCMD_DIR_WRITE 0x00000100
75 /* Data Length offset */
76 #define SFCMD_DLEN_OFFSET 9
77 /* Command Error */
78 #define SFSTAT_CMD_ERR 0x20000000
79 /* Access Command Pending */
80 #define SFSTAT_CMD_PEND 0x00400000
81 /* Frequency set to 100MHz. */
82 #define EBUCC_EBUDIV_SELF100 0x00000001
83 /* Serial Flash */
84 #define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
85 /* 8-bit multiplexed */
86 #define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
87 /* Serial Flash */
88 #define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
89 /* Chip Select after opcode */
90 #define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
92 #define CLOCK_100M 100000000
93 #define CLOCK_50M 50000000
95 struct falcon_sflash {
96 u32 sfcmd; /* for caching of opcode, direction, ... */
97 struct spi_master *master;
100 int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
101 unsigned long flags)
103 struct device *dev = &spi->dev;
104 struct falcon_sflash *priv = spi_master_get_devdata(spi->master);
105 const u8 *txp = t->tx_buf;
106 u8 *rxp = t->rx_buf;
107 unsigned int bytelen = ((8 * t->len + 7) / 8);
108 unsigned int len, alen, dumlen;
109 u32 val;
110 enum {
111 state_init,
112 state_command_prepare,
113 state_write,
114 state_read,
115 state_disable_cs,
116 state_end
117 } state = state_init;
119 do {
120 switch (state) {
121 case state_init: /* detect phase of upper layer sequence */
123 /* initial write ? */
124 if (flags & FALCON_SPI_XFER_BEGIN) {
125 if (!txp) {
126 dev_err(dev,
127 "BEGIN without tx data!\n");
128 return -ENODATA;
131 * Prepare the parts of the sfcmd register,
132 * which should not change during a sequence!
133 * Only exception are the length fields,
134 * especially alen and dumlen.
137 priv->sfcmd = ((spi->chip_select
138 << SFCMD_CS_OFFSET)
139 & SFCMD_CS_MASK);
140 priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
141 priv->sfcmd |= *txp;
142 txp++;
143 bytelen--;
144 if (bytelen) {
146 * more data:
147 * maybe address and/or dummy
149 state = state_command_prepare;
150 break;
151 } else {
152 dev_dbg(dev, "write cmd %02X\n",
153 priv->sfcmd & SFCMD_OPC_MASK);
156 /* continued write ? */
157 if (txp && bytelen) {
158 state = state_write;
159 break;
161 /* read data? */
162 if (rxp && bytelen) {
163 state = state_read;
164 break;
166 /* end of sequence? */
167 if (flags & FALCON_SPI_XFER_END)
168 state = state_disable_cs;
169 else
170 state = state_end;
171 break;
173 /* collect tx data for address and dummy phase */
174 case state_command_prepare:
176 /* txp is valid, already checked */
177 val = 0;
178 alen = 0;
179 dumlen = 0;
180 while (bytelen > 0) {
181 if (alen < 3) {
182 val = (val << 8) | (*txp++);
183 alen++;
184 } else if ((dumlen < 15) && (*txp == 0)) {
186 * assume dummy bytes are set to 0
187 * from upper layer
189 dumlen++;
190 txp++;
191 } else {
192 break;
194 bytelen--;
196 priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
197 priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
198 (dumlen << SFCMD_DUMLEN_OFFSET);
199 if (alen > 0)
200 ltq_ebu_w32(val, SFADDR);
202 dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
203 priv->sfcmd & SFCMD_OPC_MASK,
204 alen, val, dumlen);
206 if (bytelen > 0) {
207 /* continue with write */
208 state = state_write;
209 } else if (flags & FALCON_SPI_XFER_END) {
210 /* end of sequence? */
211 state = state_disable_cs;
212 } else {
214 * go to end and expect another
215 * call (read or write)
217 state = state_end;
219 break;
221 case state_write:
223 /* txp still valid */
224 priv->sfcmd |= SFCMD_DIR_WRITE;
225 len = 0;
226 val = 0;
227 do {
228 if (bytelen--)
229 val |= (*txp++) << (8 * len++);
230 if ((flags & FALCON_SPI_XFER_END)
231 && (bytelen == 0)) {
232 priv->sfcmd &=
233 ~SFCMD_KEEP_CS_KEEP_SELECTED;
235 if ((len == 4) || (bytelen == 0)) {
236 ltq_ebu_w32(val, SFDATA);
237 ltq_ebu_w32(priv->sfcmd
238 | (len<<SFCMD_DLEN_OFFSET),
239 SFCMD);
240 len = 0;
241 val = 0;
242 priv->sfcmd &= ~(SFCMD_ALEN_MASK
243 | SFCMD_DUMLEN_MASK);
245 } while (bytelen);
246 state = state_end;
247 break;
249 case state_read:
251 /* read data */
252 priv->sfcmd &= ~SFCMD_DIR_WRITE;
253 do {
254 if ((flags & FALCON_SPI_XFER_END)
255 && (bytelen <= 4)) {
256 priv->sfcmd &=
257 ~SFCMD_KEEP_CS_KEEP_SELECTED;
259 len = (bytelen > 4) ? 4 : bytelen;
260 bytelen -= len;
261 ltq_ebu_w32(priv->sfcmd
262 | (len << SFCMD_DLEN_OFFSET), SFCMD);
263 priv->sfcmd &= ~(SFCMD_ALEN_MASK
264 | SFCMD_DUMLEN_MASK);
265 do {
266 val = ltq_ebu_r32(SFSTAT);
267 if (val & SFSTAT_CMD_ERR) {
268 /* reset error status */
269 dev_err(dev, "SFSTAT: CMD_ERR");
270 dev_err(dev, " (%x)\n", val);
271 ltq_ebu_w32(SFSTAT_CMD_ERR,
272 SFSTAT);
273 return -EBADE;
275 } while (val & SFSTAT_CMD_PEND);
276 val = ltq_ebu_r32(SFDATA);
277 do {
278 *rxp = (val & 0xFF);
279 rxp++;
280 val >>= 8;
281 len--;
282 } while (len);
283 } while (bytelen);
284 state = state_end;
285 break;
287 case state_disable_cs:
289 priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
290 ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
291 SFCMD);
292 val = ltq_ebu_r32(SFSTAT);
293 if (val & SFSTAT_CMD_ERR) {
294 /* reset error status */
295 dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
296 ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
297 return -EBADE;
299 state = state_end;
300 break;
302 case state_end:
303 break;
305 } while (state != state_end);
307 return 0;
310 static int falcon_sflash_setup(struct spi_device *spi)
312 unsigned int i;
313 unsigned long flags;
315 if (spi->chip_select > 0)
316 return -ENODEV;
318 spin_lock_irqsave(&ebu_lock, flags);
320 if (spi->max_speed_hz >= CLOCK_100M) {
321 /* set EBU clock to 100 MHz */
322 ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
323 i = 1; /* divider */
324 } else {
325 /* set EBU clock to 50 MHz */
326 ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
328 /* search for suitable divider */
329 for (i = 1; i < 7; i++) {
330 if (CLOCK_50M / i <= spi->max_speed_hz)
331 break;
335 /* setup period of serial clock */
336 ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
337 | SFTIME_SCKR_POS_MASK
338 | SFTIME_SCK_PER_MASK,
339 (i << SFTIME_SCKR_POS_OFFSET)
340 | (i << (SFTIME_SCK_PER_OFFSET + 1)),
341 SFTIME);
344 * set some bits of unused_wd, to not trigger HOLD/WP
345 * signals on non QUAD flashes
347 ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
349 ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
350 BUSRCON0);
351 ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
352 /* set address wrap around to maximum for 24-bit addresses */
353 ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
355 spin_unlock_irqrestore(&ebu_lock, flags);
357 return 0;
360 static int falcon_sflash_prepare_xfer(struct spi_master *master)
362 return 0;
365 static int falcon_sflash_unprepare_xfer(struct spi_master *master)
367 return 0;
370 static int falcon_sflash_xfer_one(struct spi_master *master,
371 struct spi_message *m)
373 struct falcon_sflash *priv = spi_master_get_devdata(master);
374 struct spi_transfer *t;
375 unsigned long spi_flags;
376 unsigned long flags;
377 int ret = 0;
379 priv->sfcmd = 0;
380 m->actual_length = 0;
382 spi_flags = FALCON_SPI_XFER_BEGIN;
383 list_for_each_entry(t, &m->transfers, transfer_list) {
384 if (list_is_last(&t->transfer_list, &m->transfers))
385 spi_flags |= FALCON_SPI_XFER_END;
387 spin_lock_irqsave(&ebu_lock, flags);
388 ret = falcon_sflash_xfer(m->spi, t, spi_flags);
389 spin_unlock_irqrestore(&ebu_lock, flags);
391 if (ret)
392 break;
394 m->actual_length += t->len;
396 WARN_ON(t->delay_usecs || t->cs_change);
397 spi_flags = 0;
400 m->status = ret;
401 spi_finalize_current_message(master);
403 return 0;
406 static int falcon_sflash_probe(struct platform_device *pdev)
408 struct falcon_sflash *priv;
409 struct spi_master *master;
410 int ret;
412 if (ltq_boot_select() != BS_SPI) {
413 dev_err(&pdev->dev, "invalid bootstrap options\n");
414 return -ENODEV;
417 master = spi_alloc_master(&pdev->dev, sizeof(*priv));
418 if (!master)
419 return -ENOMEM;
421 priv = spi_master_get_devdata(master);
422 priv->master = master;
424 master->mode_bits = SPI_MODE_3;
425 master->num_chipselect = 1;
426 master->flags = SPI_MASTER_HALF_DUPLEX;
427 master->bus_num = -1;
428 master->setup = falcon_sflash_setup;
429 master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
430 master->transfer_one_message = falcon_sflash_xfer_one;
431 master->unprepare_transfer_hardware = falcon_sflash_unprepare_xfer;
432 master->dev.of_node = pdev->dev.of_node;
434 platform_set_drvdata(pdev, priv);
436 ret = spi_register_master(master);
437 if (ret)
438 spi_master_put(master);
439 return ret;
442 static int falcon_sflash_remove(struct platform_device *pdev)
444 struct falcon_sflash *priv = platform_get_drvdata(pdev);
446 spi_unregister_master(priv->master);
448 return 0;
451 static const struct of_device_id falcon_sflash_match[] = {
452 { .compatible = "lantiq,sflash-falcon" },
455 MODULE_DEVICE_TABLE(of, falcon_sflash_match);
457 static struct platform_driver falcon_sflash_driver = {
458 .probe = falcon_sflash_probe,
459 .remove = falcon_sflash_remove,
460 .driver = {
461 .name = DRV_NAME,
462 .owner = THIS_MODULE,
463 .of_match_table = falcon_sflash_match,
467 module_platform_driver(falcon_sflash_driver);
469 MODULE_LICENSE("GPL");
470 MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");