arch/powerpc/boot/dts/ep88xc.dts

   1 /*
   2  * EP88xC Device Tree Source
   3  *
   4  * Copyright 2006 MontaVista Software, Inc.
   5  * Copyright 2007,2008 Freescale Semiconductor, Inc.
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "EP88xC";
  17         compatible = "fsl,ep88xc";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 PowerPC,885@0 {
  26                         device_type = "cpu";
  27                         reg = <0x0>;
  28                         d-cache-line-size = <16>;
  29                         i-cache-line-size = <16>;
  30                         d-cache-size = <8192>;
  31                         i-cache-size = <8192>;
  32                         timebase-frequency = <0>;
  33                         bus-frequency = <0>;
  34                         clock-frequency = <0>;
  35                         interrupts = <15 2>;    // decrementer interrupt
  36                         interrupt-parent = <&PIC>;
  37                 };
  38         };
  39
  40         memory {
  41                 device_type = "memory";
  42                 reg = <0x0 0x0>;
  43         };
  44
  45         localbus@fa200100 {
  46                 compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
  47                 #address-cells = <2>;
  48                 #size-cells = <1>;
  49                 reg = <0xfa200100 0x40>;
  50
  51                 ranges = <
  52                         0x0 0x0 0xfc000000 0x4000000
  53                         0x3 0x0 0xfa000000 0x1000000
  54                 >;
  55
  56                 flash@0,2000000 {
  57                         compatible = "cfi-flash";
  58                         reg = <0x0 0x2000000 0x2000000>;
  59                         bank-width = <4>;
  60                         device-width = <2>;
  61                 };
  62
  63                 board-control@3,400000 {
  64                         reg = <0x3 0x400000 0x10>;
  65                         compatible = "fsl,ep88xc-bcsr";
  66                 };
  67         };
  68
  69         soc@fa200000 {
  70                 compatible = "fsl,mpc885", "fsl,pq1-soc";
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 device_type = "soc";
  74                 ranges = <0x0 0xfa200000 0x4000>;
  75                 bus-frequency = <0>;
  76
  77                 // Temporary -- will go away once kernel uses ranges for get_immrbase().
  78                 reg = <0xfa200000 0x4000>;
  79
  80                 mdio@e00 {
  81                         compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
  82                         reg = <0xe00 0x188>;
  83                         #address-cells = <1>;
  84                         #size-cells = <0>;
  85
  86                         PHY0: ethernet-phy@0 {
  87                                 reg = <0x0>;
  88                                 device_type = "ethernet-phy";
  89                         };
  90
  91                         PHY1: ethernet-phy@1 {
  92                                 reg = <0x1>;
  93                                 device_type = "ethernet-phy";
  94                         };
  95                 };
  96
  97                 ethernet@e00 {
  98                         device_type = "network";
  99                         compatible = "fsl,mpc885-fec-enet",
 100                                      "fsl,pq1-fec-enet";
 101                         reg = <0xe00 0x188>;
 102                         local-mac-address = [ 00 00 00 00 00 00 ];
 103                         interrupts = <3 1>;
 104                         interrupt-parent = <&PIC>;
 105                         phy-handle = <&PHY0>;
 106                         linux,network-index = <0>;
 107                 };
 108
 109                 ethernet@1e00 {
 110                         device_type = "network";
 111                         compatible = "fsl,mpc885-fec-enet",
 112                                      "fsl,pq1-fec-enet";
 113                         reg = <0x1e00 0x188>;
 114                         local-mac-address = [ 00 00 00 00 00 00 ];
 115                         interrupts = <7 1>;
 116                         interrupt-parent = <&PIC>;
 117                         phy-handle = <&PHY1>;
 118                         linux,network-index = <1>;
 119                 };
 120
 121                 PIC: interrupt-controller@0 {
 122                         interrupt-controller;
 123                         #interrupt-cells = <2>;
 124                         reg = <0x0 0x24>;
 125                         compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 126                 };
 127
 128                 pcmcia@80 {
 129                         #address-cells = <3>;
 130                         #interrupt-cells = <1>;
 131                         #size-cells = <2>;
 132                         compatible = "fsl,pq-pcmcia";
 133                         device_type = "pcmcia";
 134                         reg = <0x80 0x80>;
 135                         interrupt-parent = <&PIC>;
 136                         interrupts = <13 1>;
 137                 };
 138
 139                 cpm@9c0 {
 140                         #address-cells = <1>;
 141                         #size-cells = <1>;
 142                         compatible = "fsl,mpc885-cpm", "fsl,cpm1";
 143                         command-proc = <0x9c0>;
 144                         interrupts = <0>;       // cpm error interrupt
 145                         interrupt-parent = <&CPM_PIC>;
 146                         reg = <0x9c0 0x40>;
 147                         ranges;
 148
 149                         muram@2000 {
 150                                 #address-cells = <1>;
 151                                 #size-cells = <1>;
 152                                 ranges = <0x0 0x2000 0x2000>;
 153
 154                                 data@0 {
 155                                         compatible = "fsl,cpm-muram-data";
 156                                         reg = <0x0 0x1c00>;
 157                                 };
 158                         };
 159
 160                         brg@9f0 {
 161                                 compatible = "fsl,mpc885-brg",
 162                                              "fsl,cpm1-brg",
 163                                              "fsl,cpm-brg";
 164                                 reg = <0x9f0 0x10>;
 165                         };
 166
 167                         CPM_PIC: interrupt-controller@930 {
 168                                 interrupt-controller;
 169                                 #interrupt-cells = <1>;
 170                                 interrupts = <5 2 0 2>;
 171                                 interrupt-parent = <&PIC>;
 172                                 reg = <0x930 0x20>;
 173                                 compatible = "fsl,mpc885-cpm-pic",
 174                                              "fsl,cpm1-pic";
 175                         };
 176
 177                         // MON-1
 178                         serial@a80 {
 179                                 device_type = "serial";
 180                                 compatible = "fsl,mpc885-smc-uart",
 181                                              "fsl,cpm1-smc-uart";
 182                                 reg = <0xa80 0x10 0x3e80 0x40>;
 183                                 interrupts = <4>;
 184                                 interrupt-parent = <&CPM_PIC>;
 185                                 fsl,cpm-brg = <1>;
 186                                 fsl,cpm-command = <0x90>;
 187                                 linux,planetcore-label = "SMC1";
 188                         };
 189
 190                         // SER-1
 191                         serial@a20 {
 192                                 device_type = "serial";
 193                                 compatible = "fsl,mpc885-scc-uart",
 194                                              "fsl,cpm1-scc-uart";
 195                                 reg = <0xa20 0x20 0x3d00 0x80>;
 196                                 interrupts = <29>;
 197                                 interrupt-parent = <&CPM_PIC>;
 198                                 fsl,cpm-brg = <2>;
 199                                 fsl,cpm-command = <0x40>;
 200                                 linux,planetcore-label = "SCC2";
 201                         };
 202
 203                         usb@a00 {
 204                                 #address-cells = <1>;
 205                                 #size-cells = <0>;
 206                                 compatible = "fsl,mpc885-usb",
 207                                              "fsl,cpm1-usb";
 208                                 reg = <0xa00 0x18 0x1c00 0x80>;
 209                                 interrupt-parent = <&CPM_PIC>;
 210                                 interrupts = <30>;
 211                                 fsl,cpm-command = <0000>;
 212                         };
 213                 };
 214         };
 215 };