Linux 2.6.31.6
[linux/fpc-iii.git] / arch / powerpc / boot / dts / mpc8569mds.dts
blob9e4ce99e1613643f60430f001813f2da0977a6e1
1 /*
2  * MPC8569E MDS Device Tree Source
3  *
4  * Copyright (C) 2009 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "MPC8569EMDS";
16         compatible = "fsl,MPC8569EMDS";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 serial0 = &serial0;
22                 serial1 = &serial1;
23                 ethernet0 = &enet0;
24                 ethernet1 = &enet1;
25                 ethernet2 = &enet2;
26                 ethernet3 = &enet3;
27                 ethernet5 = &enet5;
28                 ethernet7 = &enet7;
29                 pci1 = &pci1;
30                 rapidio0 = &rio0;
31         };
33         cpus {
34                 #address-cells = <1>;
35                 #size-cells = <0>;
37                 PowerPC,8569@0 {
38                         device_type = "cpu";
39                         reg = <0x0>;
40                         d-cache-line-size = <32>;       // 32 bytes
41                         i-cache-line-size = <32>;       // 32 bytes
42                         d-cache-size = <0x8000>;                // L1, 32K
43                         i-cache-size = <0x8000>;                // L1, 32K
44                         timebase-frequency = <0>;
45                         bus-frequency = <0>;
46                         clock-frequency = <0>;
47                         next-level-cache = <&L2>;
48                 };
49         };
51         memory {
52                 device_type = "memory";
53         };
55         localbus@e0005000 {
56                 #address-cells = <2>;
57                 #size-cells = <1>;
58                 compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
59                 reg = <0xe0005000 0x1000>;
60                 interrupts = <19 2>;
61                 interrupt-parent = <&mpic>;
63                 ranges = <0x0 0x0 0xfe000000 0x02000000
64                           0x1 0x0 0xf8000000 0x00008000
65                           0x2 0x0 0xf0000000 0x04000000
66                           0x3 0x0 0xfc000000 0x00008000
67                           0x4 0x0 0xf8008000 0x00008000
68                           0x5 0x0 0xf8010000 0x00008000>;
70                 nor@0,0 {
71                         #address-cells = <1>;
72                         #size-cells = <1>;
73                         compatible = "cfi-flash";
74                         reg = <0x0 0x0 0x02000000>;
75                         bank-width = <1>;
76                         device-width = <1>;
77                         partition@0 {
78                                 label = "ramdisk";
79                                 reg = <0x00000000 0x01c00000>;
80                         };
81                         partition@1c00000 {
82                                 label = "kernel";
83                                 reg = <0x01c00000 0x002e0000>;
84                         };
85                         partiton@1ee0000 {
86                                 label = "dtb";
87                                 reg = <0x01ee0000 0x00020000>;
88                         };
89                         partition@1f00000 {
90                                 label = "firmware";
91                                 reg = <0x01f00000 0x00080000>;
92                                 read-only;
93                         };
94                         partition@1f80000 {
95                                 label = "u-boot";
96                                 reg = <0x01f80000 0x00080000>;
97                                 read-only;
98                         };
99                 };
101                 bcsr@1,0 {
102                         compatible = "fsl,mpc8569mds-bcsr";
103                         reg = <1 0 0x8000>;
104                 };
106                 nand@3,0 {
107                         compatible = "fsl,mpc8569-fcm-nand",
108                                      "fsl,elbc-fcm-nand";
109                         reg = <3 0 0x8000>;
110                 };
112                 pib@4,0 {
113                         compatible = "fsl,mpc8569mds-pib";
114                         reg = <4 0 0x8000>;
115                 };
117                 pib@5,0 {
118                         compatible = "fsl,mpc8569mds-pib";
119                         reg = <5 0 0x8000>;
120                 };
121         };
123         soc@e0000000 {
124                 #address-cells = <1>;
125                 #size-cells = <1>;
126                 device_type = "soc";
127                 compatible = "fsl,mpc8569-immr", "simple-bus";
128                 ranges = <0x0 0xe0000000 0x100000>;
129                 bus-frequency = <0>;
131                 ecm-law@0 {
132                         compatible = "fsl,ecm-law";
133                         reg = <0x0 0x1000>;
134                         fsl,num-laws = <10>;
135                 };
137                 ecm@1000 {
138                         compatible = "fsl,mpc8569-ecm", "fsl,ecm";
139                         reg = <0x1000 0x1000>;
140                         interrupts = <17 2>;
141                         interrupt-parent = <&mpic>;
142                 };
144                 memory-controller@2000 {
145                         compatible = "fsl,mpc8569-memory-controller";
146                         reg = <0x2000 0x1000>;
147                         interrupt-parent = <&mpic>;
148                         interrupts = <18 2>;
149                 };
151                 i2c@3000 {
152                         #address-cells = <1>;
153                         #size-cells = <0>;
154                         cell-index = <0>;
155                         compatible = "fsl-i2c";
156                         reg = <0x3000 0x100>;
157                         interrupts = <43 2>;
158                         interrupt-parent = <&mpic>;
159                         dfsrr;
161                         rtc@68 {
162                                 compatible = "dallas,ds1374";
163                                 reg = <0x68>;
164                         };
165                 };
167                 i2c@3100 {
168                         #address-cells = <1>;
169                         #size-cells = <0>;
170                         cell-index = <1>;
171                         compatible = "fsl-i2c";
172                         reg = <0x3100 0x100>;
173                         interrupts = <43 2>;
174                         interrupt-parent = <&mpic>;
175                         dfsrr;
176                 };
178                 serial0: serial@4500 {
179                         cell-index = <0>;
180                         device_type = "serial";
181                         compatible = "ns16550";
182                         reg = <0x4500 0x100>;
183                         clock-frequency = <0>;
184                         interrupts = <42 2>;
185                         interrupt-parent = <&mpic>;
186                 };
188                 serial1: serial@4600 {
189                         cell-index = <1>;
190                         device_type = "serial";
191                         compatible = "ns16550";
192                         reg = <0x4600 0x100>;
193                         clock-frequency = <0>;
194                         interrupts = <42 2>;
195                         interrupt-parent = <&mpic>;
196                 };
198                 L2: l2-cache-controller@20000 {
199                         compatible = "fsl,mpc8569-l2-cache-controller";
200                         reg = <0x20000 0x1000>;
201                         cache-line-size = <32>; // 32 bytes
202                         cache-size = <0x80000>; // L2, 512K
203                         interrupt-parent = <&mpic>;
204                         interrupts = <16 2>;
205                 };
207                 dma@21300 {
208                         #address-cells = <1>;
209                         #size-cells = <1>;
210                         compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
211                         reg = <0x21300 0x4>;
212                         ranges = <0x0 0x21100 0x200>;
213                         cell-index = <0>;
214                         dma-channel@0 {
215                                 compatible = "fsl,mpc8569-dma-channel",
216                                                 "fsl,eloplus-dma-channel";
217                                 reg = <0x0 0x80>;
218                                 cell-index = <0>;
219                                 interrupt-parent = <&mpic>;
220                                 interrupts = <20 2>;
221                         };
222                         dma-channel@80 {
223                                 compatible = "fsl,mpc8569-dma-channel",
224                                                 "fsl,eloplus-dma-channel";
225                                 reg = <0x80 0x80>;
226                                 cell-index = <1>;
227                                 interrupt-parent = <&mpic>;
228                                 interrupts = <21 2>;
229                         };
230                         dma-channel@100 {
231                                 compatible = "fsl,mpc8569-dma-channel",
232                                                 "fsl,eloplus-dma-channel";
233                                 reg = <0x100 0x80>;
234                                 cell-index = <2>;
235                                 interrupt-parent = <&mpic>;
236                                 interrupts = <22 2>;
237                         };
238                         dma-channel@180 {
239                                 compatible = "fsl,mpc8569-dma-channel",
240                                                 "fsl,eloplus-dma-channel";
241                                 reg = <0x180 0x80>;
242                                 cell-index = <3>;
243                                 interrupt-parent = <&mpic>;
244                                 interrupts = <23 2>;
245                         };
246                 };
248                 sdhci@2e000 {
249                         compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
250                         reg = <0x2e000 0x1000>;
251                         interrupts = <72 0x8>;
252                         interrupt-parent = <&mpic>;
253                         /* Filled in by U-Boot */
254                         clock-frequency = <0>;
255                         status = "disabled";
256                         sdhci,1-bit-only;
257                 };
259                 crypto@30000 {
260                         compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
261                                 "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
262                         reg = <0x30000 0x10000>;
263                         interrupts = <45 2 58 2>;
264                         interrupt-parent = <&mpic>;
265                         fsl,num-channels = <4>;
266                         fsl,channel-fifo-len = <24>;
267                         fsl,exec-units-mask = <0xbfe>;
268                         fsl,descriptor-types-mask = <0x3ab0ebf>;
269                 };
271                 mpic: pic@40000 {
272                         interrupt-controller;
273                         #address-cells = <0>;
274                         #interrupt-cells = <2>;
275                         reg = <0x40000 0x40000>;
276                         compatible = "chrp,open-pic";
277                         device_type = "open-pic";
278                 };
280                 msi@41600 {
281                         compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
282                         reg = <0x41600 0x80>;
283                         msi-available-ranges = <0 0x100>;
284                         interrupts = <
285                                 0xe0 0
286                                 0xe1 0
287                                 0xe2 0
288                                 0xe3 0
289                                 0xe4 0
290                                 0xe5 0
291                                 0xe6 0
292                                 0xe7 0>;
293                         interrupt-parent = <&mpic>;
294                 };
296                 global-utilities@e0000 {
297                         compatible = "fsl,mpc8569-guts";
298                         reg = <0xe0000 0x1000>;
299                         fsl,has-rstcr;
300                 };
302                 par_io@e0100 {
303                         #address-cells = <1>;
304                         #size-cells = <1>;
305                         reg = <0xe0100 0x100>;
306                         ranges = <0x0 0xe0100 0x100>;
307                         device_type = "par_io";
308                         num-ports = <7>;
310                         qe_pio_e: gpio-controller@80 {
311                                 #gpio-cells = <2>;
312                                 compatible = "fsl,mpc8569-qe-pario-bank",
313                                              "fsl,mpc8323-qe-pario-bank";
314                                 reg = <0x80 0x18>;
315                                 gpio-controller;
316                         };
318                         pio1: ucc_pin@01 {
319                                 pio-map = <
320                         /* port  pin  dir  open_drain  assignment  has_irq */
321                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
322                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
323                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
324                                         0x0  0x0  0x1  0x0  0x3  0x0    /* ENET1_TXD0_SER1_TXD0 */
325                                         0x0  0x1  0x1  0x0  0x3  0x0    /* ENET1_TXD1_SER1_TXD1 */
326                                         0x0  0x2  0x1  0x0  0x1  0x0    /* ENET1_TXD2_SER1_TXD2 */
327                                         0x0  0x3  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
328                                         0x0  0x6  0x2  0x0  0x3  0x0    /* ENET1_RXD0_SER1_RXD0 */
329                                         0x0  0x7  0x2  0x0  0x1  0x0    /* ENET1_RXD1_SER1_RXD1 */
330                                         0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
331                                         0x0  0x9  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
332                                         0x0  0x4  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
333                                         0x0  0xc  0x2  0x0  0x3  0x0    /* ENET1_RX_DV_SER1_CTS_B */
334                                         0x2  0x8  0x2  0x0  0x1  0x0    /* ENET1_GRXCLK */
335                                         0x2  0x14 0x1  0x0  0x2  0x0>;  /* ENET1_GTXCLK */
336                         };
338                         pio2: ucc_pin@02 {
339                                 pio-map = <
340                         /* port  pin  dir  open_drain  assignment  has_irq */
341                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
342                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
343                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
344                                         0x0  0xe  0x1  0x0  0x2  0x0    /* ENET2_TXD0_SER2_TXD0 */
345                                         0x0  0xf  0x1  0x0  0x2  0x0    /* ENET2_TXD1_SER2_TXD1 */
346                                         0x0  0x10 0x1  0x0  0x1  0x0    /* ENET2_TXD2_SER2_TXD2 */
347                                         0x0  0x11 0x1  0x0  0x1  0x0    /* ENET2_TXD3_SER2_TXD3 */
348                                         0x0  0x14 0x2  0x0  0x2  0x0    /* ENET2_RXD0_SER2_RXD0 */
349                                         0x0  0x15 0x2  0x0  0x1  0x0    /* ENET2_RXD1_SER2_RXD1 */
350                                         0x0  0x16 0x2  0x0  0x1  0x0    /* ENET2_RXD2_SER2_RXD2 */
351                                         0x0  0x17 0x2  0x0  0x1  0x0    /* ENET2_RXD3_SER2_RXD3 */
352                                         0x0  0x12 0x1  0x0  0x2  0x0    /* ENET2_TX_EN_SER2_RTS_B */
353                                         0x0  0x1a 0x2  0x0  0x3  0x0    /* ENET2_RX_DV_SER2_CTS_B */
354                                         0x2  0x3  0x2  0x0  0x1  0x0    /* ENET2_GRXCLK */
355                                         0x2  0x2 0x1  0x0  0x2  0x0>;   /* ENET2_GTXCLK */
356                         };
358                         pio3: ucc_pin@03 {
359                                 pio-map = <
360                         /* port  pin  dir  open_drain  assignment  has_irq */
361                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
362                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
363                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
364                                         0x0  0x1d 0x1  0x0  0x2  0x0    /* ENET3_TXD0_SER3_TXD0 */
365                                         0x0  0x1e 0x1  0x0  0x3  0x0    /* ENET3_TXD1_SER3_TXD1 */
366                                         0x0  0x1f 0x1  0x0  0x2  0x0    /* ENET3_TXD2_SER3_TXD2 */
367                                         0x1  0x0  0x1  0x0  0x3  0x0    /* ENET3_TXD3_SER3_TXD3 */
368                                         0x1  0x3  0x2  0x0  0x3  0x0    /* ENET3_RXD0_SER3_RXD0 */
369                                         0x1  0x4  0x2  0x0  0x1  0x0    /* ENET3_RXD1_SER3_RXD1 */
370                                         0x1  0x5  0x2  0x0  0x2  0x0    /* ENET3_RXD2_SER3_RXD2 */
371                                         0x1  0x6  0x2  0x0  0x3  0x0    /* ENET3_RXD3_SER3_RXD3 */
372                                         0x1  0x1  0x1  0x0  0x1  0x0    /* ENET3_TX_EN_SER3_RTS_B */
373                                         0x1  0x9  0x2  0x0  0x3  0x0    /* ENET3_RX_DV_SER3_CTS_B */
374                                         0x2  0x9  0x2  0x0  0x2  0x0    /* ENET3_GRXCLK */
375                                         0x2  0x19 0x1  0x0  0x2  0x0>;  /* ENET3_GTXCLK */
376                         };
378                         pio4: ucc_pin@04 {
379                                 pio-map = <
380                         /* port  pin  dir  open_drain  assignment  has_irq */
381                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
382                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
383                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
384                                         0x1  0xc  0x1  0x0  0x2  0x0    /* ENET4_TXD0_SER4_TXD0 */
385                                         0x1  0xd  0x1  0x0  0x2  0x0    /* ENET4_TXD1_SER4_TXD1 */
386                                         0x1  0xe  0x1  0x0  0x1  0x0    /* ENET4_TXD2_SER4_TXD2 */
387                                         0x1  0xf  0x1  0x0  0x2  0x0    /* ENET4_TXD3_SER4_TXD3 */
388                                         0x1  0x12 0x2  0x0  0x2  0x0    /* ENET4_RXD0_SER4_RXD0 */
389                                         0x1  0x13 0x2  0x0  0x1  0x0    /* ENET4_RXD1_SER4_RXD1 */
390                                         0x1  0x14 0x2  0x0  0x1  0x0    /* ENET4_RXD2_SER4_RXD2 */
391                                         0x1  0x15 0x2  0x0  0x2  0x0    /* ENET4_RXD3_SER4_RXD3 */
392                                         0x1  0x10 0x1  0x0  0x2  0x0    /* ENET4_TX_EN_SER4_RTS_B */
393                                         0x1  0x18 0x2  0x0  0x3  0x0    /* ENET4_RX_DV_SER4_CTS_B */
394                                         0x2  0x11 0x2  0x0  0x2  0x0    /* ENET4_GRXCLK */
395                                         0x2  0x18 0x1  0x0  0x2  0x0>;  /* ENET4_GTXCLK */
396                         };
397                 };
398         };
400         qe@e0080000 {
401                 #address-cells = <1>;
402                 #size-cells = <1>;
403                 device_type = "qe";
404                 compatible = "fsl,qe";
405                 ranges = <0x0 0xe0080000 0x40000>;
406                 reg = <0xe0080000 0x480>;
407                 brg-frequency = <0>;
408                 bus-frequency = <0>;
409                 fsl,qe-num-riscs = <4>;
410                 fsl,qe-num-snums = <46>;
412                 qeic: interrupt-controller@80 {
413                         interrupt-controller;
414                         compatible = "fsl,qe-ic";
415                         #address-cells = <0>;
416                         #interrupt-cells = <1>;
417                         reg = <0x80 0x80>;
418                         interrupts = <46 2 46 2>; //high:30 low:30
419                         interrupt-parent = <&mpic>;
420                 };
422                 spi@4c0 {
423                         #address-cells = <1>;
424                         #size-cells = <0>;
425                         compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
426                         reg = <0x4c0 0x40>;
427                         cell-index = <0>;
428                         interrupts = <2>;
429                         interrupt-parent = <&qeic>;
430                         gpios = <&qe_pio_e 30 0>;
431                         mode = "cpu-qe";
433                         serial-flash@0 {
434                                 compatible = "stm,m25p40";
435                                 reg = <0>;
436                                 spi-max-frequency = <25000000>;
437                         };
438                 };
440                 spi@500 {
441                         cell-index = <1>;
442                         compatible = "fsl,spi";
443                         reg = <0x500 0x40>;
444                         interrupts = <1>;
445                         interrupt-parent = <&qeic>;
446                         mode = "cpu";
447                 };
449                 enet0: ucc@2000 {
450                         device_type = "network";
451                         compatible = "ucc_geth";
452                         cell-index = <1>;
453                         reg = <0x2000 0x200>;
454                         interrupts = <32>;
455                         interrupt-parent = <&qeic>;
456                         local-mac-address = [ 00 00 00 00 00 00 ];
457                         rx-clock-name = "none";
458                         tx-clock-name = "clk12";
459                         pio-handle = <&pio1>;
460                         phy-handle = <&qe_phy0>;
461                         phy-connection-type = "rgmii-id";
462                 };
464                 mdio@2120 {
465                         #address-cells = <1>;
466                         #size-cells = <0>;
467                         reg = <0x2120 0x18>;
468                         compatible = "fsl,ucc-mdio";
470                         qe_phy0: ethernet-phy@07 {
471                                 interrupt-parent = <&mpic>;
472                                 interrupts = <1 1>;
473                                 reg = <0x7>;
474                                 device_type = "ethernet-phy";
475                         };
476                         qe_phy1: ethernet-phy@01 {
477                                 interrupt-parent = <&mpic>;
478                                 interrupts = <2 1>;
479                                 reg = <0x1>;
480                                 device_type = "ethernet-phy";
481                         };
482                         qe_phy2: ethernet-phy@02 {
483                                 interrupt-parent = <&mpic>;
484                                 interrupts = <3 1>;
485                                 reg = <0x2>;
486                                 device_type = "ethernet-phy";
487                         };
488                         qe_phy3: ethernet-phy@03 {
489                                 interrupt-parent = <&mpic>;
490                                 interrupts = <4 1>;
491                                 reg = <0x3>;
492                                 device_type = "ethernet-phy";
493                         };
494                         qe_phy5: ethernet-phy@04 {
495                                 interrupt-parent = <&mpic>;
496                                 reg = <0x04>;
497                                 device_type = "ethernet-phy";
498                         };
499                         qe_phy7: ethernet-phy@06 {
500                                 interrupt-parent = <&mpic>;
501                                 reg = <0x6>;
502                                 device_type = "ethernet-phy";
503                         };
504                         tbi-phy@11 {
505                                 reg = <0x11>;
506                                 device_type = "tbi-phy";
507                         };
508                 };
509                 mdio@3520 {
510                         #address-cells = <1>;
511                         #size-cells = <0>;
512                         reg = <0x3520 0x18>;
513                         compatible = "fsl,ucc-mdio";
515                         tbi0: tbi-phy@15 {
516                         reg = <0x15>;
517                         device_type = "tbi-phy";
518                         };
519                 };
520                 mdio@3720 {
521                         #address-cells = <1>;
522                         #size-cells = <0>;
523                         reg = <0x3720 0x38>;
524                         compatible = "fsl,ucc-mdio";
525                         tbi1: tbi-phy@17 {
526                                 reg = <0x17>;
527                                 device_type = "tbi-phy";
528                         };
529                 };
531                 enet2: ucc@2200 {
532                         device_type = "network";
533                         compatible = "ucc_geth";
534                         cell-index = <3>;
535                         reg = <0x2200 0x200>;
536                         interrupts = <34>;
537                         interrupt-parent = <&qeic>;
538                         local-mac-address = [ 00 00 00 00 00 00 ];
539                         rx-clock-name = "none";
540                         tx-clock-name = "clk12";
541                         pio-handle = <&pio3>;
542                         phy-handle = <&qe_phy2>;
543                         phy-connection-type = "rgmii-id";
544                 };
546                 enet1: ucc@3000 {
547                         device_type = "network";
548                         compatible = "ucc_geth";
549                         cell-index = <2>;
550                         reg = <0x3000 0x200>;
551                         interrupts = <33>;
552                         interrupt-parent = <&qeic>;
553                         local-mac-address = [ 00 00 00 00 00 00 ];
554                         rx-clock-name = "none";
555                         tx-clock-name = "clk17";
556                         pio-handle = <&pio2>;
557                         phy-handle = <&qe_phy1>;
558                         phy-connection-type = "rgmii-id";
559                 };
561                 enet3: ucc@3200 {
562                         device_type = "network";
563                         compatible = "ucc_geth";
564                         cell-index = <4>;
565                         reg = <0x3200 0x200>;
566                         interrupts = <35>;
567                         interrupt-parent = <&qeic>;
568                         local-mac-address = [ 00 00 00 00 00 00 ];
569                         rx-clock-name = "none";
570                         tx-clock-name = "clk17";
571                         pio-handle = <&pio4>;
572                         phy-handle = <&qe_phy3>;
573                         phy-connection-type = "rgmii-id";
574                 };
576                 enet5: ucc@3400 {
577                         device_type = "network";
578                         compatible = "ucc_geth";
579                         cell-index = <6>;
580                         reg = <0x3400 0x200>;
581                         interrupts = <41>;
582                         interrupt-parent = <&qeic>;
583                         local-mac-address = [ 00 00 00 00 00 00 ];
584                         rx-clock-name = "none";
585                         tx-clock-name = "none";
586                         tbi-handle = <&tbi0>;
587                         phy-handle = <&qe_phy5>;
588                         phy-connection-type = "sgmii";
589                 };
591                 enet7: ucc@3600 {
592                         device_type = "network";
593                         compatible = "ucc_geth";
594                         cell-index = <8>;
595                         reg = <0x3600 0x200>;
596                         interrupts = <43>;
597                         interrupt-parent = <&qeic>;
598                         local-mac-address = [ 00 00 00 00 00 00 ];
599                         rx-clock-name = "none";
600                         tx-clock-name = "none";
601                         tbi-handle = <&tbi1>;
602                         phy-handle = <&qe_phy7>;
603                         phy-connection-type = "sgmii";
604                 };
606                 muram@10000 {
607                         #address-cells = <1>;
608                         #size-cells = <1>;
609                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
610                         ranges = <0x0 0x10000 0x20000>;
612                         data-only@0 {
613                                 compatible = "fsl,qe-muram-data",
614                                              "fsl,cpm-muram-data";
615                                 reg = <0x0 0x20000>;
616                         };
617                 };
619         };
621         /* PCI Express */
622         pci1: pcie@e000a000 {
623                 compatible = "fsl,mpc8548-pcie";
624                 device_type = "pci";
625                 #interrupt-cells = <1>;
626                 #size-cells = <2>;
627                 #address-cells = <3>;
628                 reg = <0xe000a000 0x1000>;
629                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
630                 interrupt-map = <
631                         /* IDSEL 0x0 (PEX) */
632                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
633                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
634                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
635                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
637                 interrupt-parent = <&mpic>;
638                 interrupts = <26 2>;
639                 bus-range = <0 255>;
640                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
641                           0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
642                 clock-frequency = <33333333>;
643                 pcie@0 {
644                         reg = <0x0 0x0 0x0 0x0 0x0>;
645                         #size-cells = <2>;
646                         #address-cells = <3>;
647                         device_type = "pci";
648                         ranges = <0x2000000 0x0 0xa0000000
649                                   0x2000000 0x0 0xa0000000
650                                   0x0 0x10000000
652                                   0x1000000 0x0 0x0
653                                   0x1000000 0x0 0x0
654                                   0x0 0x800000>;
655                 };
656         };
658         rio0: rapidio@e00c00000 {
659                 #address-cells = <2>;
660                 #size-cells = <2>;
661                 compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
662                 reg = <0xe00c0000 0x20000>;
663                 ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
664                 interrupts = <48 2 /* error     */
665                               49 2 /* bell_outb */
666                               50 2 /* bell_inb  */
667                               53 2 /* msg1_tx   */
668                               54 2 /* msg1_rx   */
669                               55 2 /* msg2_tx   */
670                               56 2 /* msg2_rx   */>;
671                 interrupt-parent = <&mpic>;
672         };