2 * MPC8xx Communication Processor Module.
3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
5 * This file contains structures and information for the communication
6 * processor channels. Some CPM control and status is available
7 * throught the MPC8xx internal memory map. See immap.h for details.
8 * This file only contains what I need for the moment, not the total
9 * CPM capabilities. I (or someone else) will add definitions as they
12 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
13 * bytes of the DP RAM and relocates the I2C parameter area to the
14 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
20 #include <asm/8xx_immap.h>
21 #include <asm/ptrace.h>
24 /* CPM Command register.
26 #define CPM_CR_RST ((ushort)0x8000)
27 #define CPM_CR_OPCODE ((ushort)0x0f00)
28 #define CPM_CR_CHAN ((ushort)0x00f0)
29 #define CPM_CR_FLG ((ushort)0x0001)
33 #define CPM_CR_CH_SCC1 ((ushort)0x0000)
34 #define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
35 #define CPM_CR_CH_SCC2 ((ushort)0x0004)
36 #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
37 #define CPM_CR_CH_TIMER CPM_CR_CH_SPI
38 #define CPM_CR_CH_SCC3 ((ushort)0x0008)
39 #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
40 #define CPM_CR_CH_SCC4 ((ushort)0x000c)
41 #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
43 #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
45 /* Export the base address of the communication processor registers
48 extern cpm8xx_t __iomem
*cpmp
; /* Pointer to comm processor */
50 #define cpm_dpalloc cpm_muram_alloc
51 #define cpm_dpfree cpm_muram_free
52 #define cpm_dpram_addr cpm_muram_addr
53 #define cpm_dpram_phys cpm_muram_dma
55 extern void cpm_setbrg(uint brg
, uint rate
);
57 extern void cpm_load_patch(cpm8xx_t
*cp
);
59 extern void cpm_reset(void);
61 /* Parameter RAM offsets.
63 #define PROFF_SCC1 ((uint)0x0000)
64 #define PROFF_IIC ((uint)0x0080)
65 #define PROFF_SCC2 ((uint)0x0100)
66 #define PROFF_SPI ((uint)0x0180)
67 #define PROFF_SCC3 ((uint)0x0200)
68 #define PROFF_SMC1 ((uint)0x0280)
69 #define PROFF_SCC4 ((uint)0x0300)
70 #define PROFF_SMC2 ((uint)0x0380)
72 /* Define enough so I can at least use the serial port as a UART.
73 * The MBX uses SMC1 as the host serial port.
75 typedef struct smc_uart
{
76 ushort smc_rbase
; /* Rx Buffer descriptor base address */
77 ushort smc_tbase
; /* Tx Buffer descriptor base address */
78 u_char smc_rfcr
; /* Rx function code */
79 u_char smc_tfcr
; /* Tx function code */
80 ushort smc_mrblr
; /* Max receive buffer length */
81 uint smc_rstate
; /* Internal */
82 uint smc_idp
; /* Internal */
83 ushort smc_rbptr
; /* Internal */
84 ushort smc_ibc
; /* Internal */
85 uint smc_rxtmp
; /* Internal */
86 uint smc_tstate
; /* Internal */
87 uint smc_tdp
; /* Internal */
88 ushort smc_tbptr
; /* Internal */
89 ushort smc_tbc
; /* Internal */
90 uint smc_txtmp
; /* Internal */
91 ushort smc_maxidl
; /* Maximum idle characters */
92 ushort smc_tmpidl
; /* Temporary idle counter */
93 ushort smc_brklen
; /* Last received break length */
94 ushort smc_brkec
; /* rcv'd break condition counter */
95 ushort smc_brkcr
; /* xmt break count register */
96 ushort smc_rmask
; /* Temporary bit mask */
97 char res1
[8]; /* Reserved */
98 ushort smc_rpbase
; /* Relocation pointer */
101 /* Function code bits.
103 #define SMC_EB ((u_char)0x10) /* Set big endian byte order */
105 /* SMC uart mode register.
107 #define SMCMR_REN ((ushort)0x0001)
108 #define SMCMR_TEN ((ushort)0x0002)
109 #define SMCMR_DM ((ushort)0x000c)
110 #define SMCMR_SM_GCI ((ushort)0x0000)
111 #define SMCMR_SM_UART ((ushort)0x0020)
112 #define SMCMR_SM_TRANS ((ushort)0x0030)
113 #define SMCMR_SM_MASK ((ushort)0x0030)
114 #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
115 #define SMCMR_REVD SMCMR_PM_EVEN
116 #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
117 #define SMCMR_BS SMCMR_PEN
118 #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
119 #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
120 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
122 /* SMC2 as Centronics parallel printer. It is half duplex, in that
123 * it can only receive or transmit. The parameter ram values for
124 * each direction are either unique or properly overlap, so we can
125 * include them in one structure.
127 typedef struct smc_centronics
{
145 ushort scent_character1
;
146 ushort scent_character2
;
147 ushort scent_character3
;
148 ushort scent_character4
;
149 ushort scent_character5
;
150 ushort scent_character6
;
151 ushort scent_character7
;
152 ushort scent_character8
;
157 /* Centronics Status Mask Register.
159 #define SMC_CENT_F ((u_char)0x08)
160 #define SMC_CENT_PE ((u_char)0x04)
161 #define SMC_CENT_S ((u_char)0x02)
163 /* SMC Event and Mask register.
165 #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
166 #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
167 #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
168 #define SMCM_BSY ((unsigned char)0x04)
169 #define SMCM_TX ((unsigned char)0x02)
170 #define SMCM_RX ((unsigned char)0x01)
172 /* Baud rate generators.
174 #define CPM_BRG_RST ((uint)0x00020000)
175 #define CPM_BRG_EN ((uint)0x00010000)
176 #define CPM_BRG_EXTC_INT ((uint)0x00000000)
177 #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
178 #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
179 #define CPM_BRG_ATB ((uint)0x00002000)
180 #define CPM_BRG_CD_MASK ((uint)0x00001ffe)
181 #define CPM_BRG_DIV16 ((uint)0x00000001)
183 /* SI Clock Route Register
185 #define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
186 #define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
187 #define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
188 #define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
189 #define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
190 #define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
191 #define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
192 #define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
196 #define SCC_GSMRH_IRP ((uint)0x00040000)
197 #define SCC_GSMRH_GDE ((uint)0x00010000)
198 #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
199 #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
200 #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
201 #define SCC_GSMRH_REVD ((uint)0x00002000)
202 #define SCC_GSMRH_TRX ((uint)0x00001000)
203 #define SCC_GSMRH_TTX ((uint)0x00000800)
204 #define SCC_GSMRH_CDP ((uint)0x00000400)
205 #define SCC_GSMRH_CTSP ((uint)0x00000200)
206 #define SCC_GSMRH_CDS ((uint)0x00000100)
207 #define SCC_GSMRH_CTSS ((uint)0x00000080)
208 #define SCC_GSMRH_TFL ((uint)0x00000040)
209 #define SCC_GSMRH_RFW ((uint)0x00000020)
210 #define SCC_GSMRH_TXSY ((uint)0x00000010)
211 #define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
212 #define SCC_GSMRH_SYNL8 ((uint)0x00000008)
213 #define SCC_GSMRH_SYNL4 ((uint)0x00000004)
214 #define SCC_GSMRH_RTSM ((uint)0x00000002)
215 #define SCC_GSMRH_RSYN ((uint)0x00000001)
217 #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
218 #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
219 #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
220 #define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
221 #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
222 #define SCC_GSMRL_TCI ((uint)0x10000000)
223 #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
224 #define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
225 #define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
226 #define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
227 #define SCC_GSMRL_RINV ((uint)0x02000000)
228 #define SCC_GSMRL_TINV ((uint)0x01000000)
229 #define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
230 #define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
231 #define SCC_GSMRL_TPL_48 ((uint)0x00800000)
232 #define SCC_GSMRL_TPL_32 ((uint)0x00600000)
233 #define SCC_GSMRL_TPL_16 ((uint)0x00400000)
234 #define SCC_GSMRL_TPL_8 ((uint)0x00200000)
235 #define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
236 #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
237 #define SCC_GSMRL_TPP_01 ((uint)0x00100000)
238 #define SCC_GSMRL_TPP_10 ((uint)0x00080000)
239 #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
240 #define SCC_GSMRL_TEND ((uint)0x00040000)
241 #define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
242 #define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
243 #define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
244 #define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
245 #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
246 #define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
247 #define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
248 #define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
249 #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
250 #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
251 #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
252 #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
253 #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
254 #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
255 #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
256 #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
257 #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
258 #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
259 #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
260 #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
261 #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
262 #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
263 #define SCC_GSMRL_ENR ((uint)0x00000020)
264 #define SCC_GSMRL_ENT ((uint)0x00000010)
265 #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
266 #define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
267 #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
268 #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
269 #define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
270 #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
271 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
272 #define SCC_GSMRL_MODE_UART ((uint)0x00000004)
273 #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
274 #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
275 #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
277 #define SCC_TODR_TOD ((ushort)0x8000)
279 /* SCC Event and Mask register.
281 #define SCCM_TXE ((unsigned char)0x10)
282 #define SCCM_BSY ((unsigned char)0x04)
283 #define SCCM_TX ((unsigned char)0x02)
284 #define SCCM_RX ((unsigned char)0x01)
286 typedef struct scc_param
{
287 ushort scc_rbase
; /* Rx Buffer descriptor base address */
288 ushort scc_tbase
; /* Tx Buffer descriptor base address */
289 u_char scc_rfcr
; /* Rx function code */
290 u_char scc_tfcr
; /* Tx function code */
291 ushort scc_mrblr
; /* Max receive buffer length */
292 uint scc_rstate
; /* Internal */
293 uint scc_idp
; /* Internal */
294 ushort scc_rbptr
; /* Internal */
295 ushort scc_ibc
; /* Internal */
296 uint scc_rxtmp
; /* Internal */
297 uint scc_tstate
; /* Internal */
298 uint scc_tdp
; /* Internal */
299 ushort scc_tbptr
; /* Internal */
300 ushort scc_tbc
; /* Internal */
301 uint scc_txtmp
; /* Internal */
302 uint scc_rcrc
; /* Internal */
303 uint scc_tcrc
; /* Internal */
306 /* Function code bits.
308 #define SCC_EB ((u_char)0x10) /* Set big endian byte order */
310 /* CPM Ethernet through SCCx.
312 typedef struct scc_enet
{
314 uint sen_cpres
; /* Preset CRC */
315 uint sen_cmask
; /* Constant mask for CRC */
316 uint sen_crcec
; /* CRC Error counter */
317 uint sen_alec
; /* alignment error counter */
318 uint sen_disfc
; /* discard frame counter */
319 ushort sen_pads
; /* Tx short frame pad character */
320 ushort sen_retlim
; /* Retry limit threshold */
321 ushort sen_retcnt
; /* Retry limit counter */
322 ushort sen_maxflr
; /* maximum frame length register */
323 ushort sen_minflr
; /* minimum frame length register */
324 ushort sen_maxd1
; /* maximum DMA1 length */
325 ushort sen_maxd2
; /* maximum DMA2 length */
326 ushort sen_maxd
; /* Rx max DMA */
327 ushort sen_dmacnt
; /* Rx DMA counter */
328 ushort sen_maxb
; /* Max BD byte count */
329 ushort sen_gaddr1
; /* Group address filter */
333 uint sen_tbuf0data0
; /* Save area 0 - current frame */
334 uint sen_tbuf0data1
; /* Save area 1 - current frame */
335 uint sen_tbuf0rba
; /* Internal */
336 uint sen_tbuf0crc
; /* Internal */
337 ushort sen_tbuf0bcnt
; /* Internal */
338 ushort sen_paddrh
; /* physical address (MSB) */
340 ushort sen_paddrl
; /* physical address (LSB) */
341 ushort sen_pper
; /* persistence */
342 ushort sen_rfbdptr
; /* Rx first BD pointer */
343 ushort sen_tfbdptr
; /* Tx first BD pointer */
344 ushort sen_tlbdptr
; /* Tx last BD pointer */
345 uint sen_tbuf1data0
; /* Save area 0 - current frame */
346 uint sen_tbuf1data1
; /* Save area 1 - current frame */
347 uint sen_tbuf1rba
; /* Internal */
348 uint sen_tbuf1crc
; /* Internal */
349 ushort sen_tbuf1bcnt
; /* Internal */
350 ushort sen_txlen
; /* Tx Frame length counter */
351 ushort sen_iaddr1
; /* Individual address filter */
355 ushort sen_boffcnt
; /* Backoff counter */
357 /* NOTE: Some versions of the manual have the following items
358 * incorrectly documented. Below is the proper order.
360 ushort sen_taddrh
; /* temp address (MSB) */
362 ushort sen_taddrl
; /* temp address (LSB) */
365 /* SCC Event register as used by Ethernet.
367 #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
368 #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
369 #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
370 #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
371 #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
372 #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
374 /* SCC Mode Register (PMSR) as used by Ethernet.
376 #define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
377 #define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
378 #define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
379 #define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
380 #define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
381 #define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
382 #define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
383 #define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
384 #define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
385 #define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
386 #define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
387 #define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
388 #define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
392 typedef struct scc_uart
{
394 char res1
[8]; /* Reserved */
395 ushort scc_maxidl
; /* Maximum idle chars */
396 ushort scc_idlc
; /* temp idle counter */
397 ushort scc_brkcr
; /* Break count register */
398 ushort scc_parec
; /* receive parity error counter */
399 ushort scc_frmec
; /* receive framing error counter */
400 ushort scc_nosec
; /* receive noise counter */
401 ushort scc_brkec
; /* receive break condition counter */
402 ushort scc_brkln
; /* last received break length */
403 ushort scc_uaddr1
; /* UART address character 1 */
404 ushort scc_uaddr2
; /* UART address character 2 */
405 ushort scc_rtemp
; /* Temp storage */
406 ushort scc_toseq
; /* Transmit out of sequence char */
407 ushort scc_char1
; /* control character 1 */
408 ushort scc_char2
; /* control character 2 */
409 ushort scc_char3
; /* control character 3 */
410 ushort scc_char4
; /* control character 4 */
411 ushort scc_char5
; /* control character 5 */
412 ushort scc_char6
; /* control character 6 */
413 ushort scc_char7
; /* control character 7 */
414 ushort scc_char8
; /* control character 8 */
415 ushort scc_rccm
; /* receive control character mask */
416 ushort scc_rccr
; /* receive control character register */
417 ushort scc_rlbc
; /* receive last break character */
420 /* SCC Event and Mask registers when it is used as a UART.
422 #define UART_SCCM_GLR ((ushort)0x1000)
423 #define UART_SCCM_GLT ((ushort)0x0800)
424 #define UART_SCCM_AB ((ushort)0x0200)
425 #define UART_SCCM_IDL ((ushort)0x0100)
426 #define UART_SCCM_GRA ((ushort)0x0080)
427 #define UART_SCCM_BRKE ((ushort)0x0040)
428 #define UART_SCCM_BRKS ((ushort)0x0020)
429 #define UART_SCCM_CCR ((ushort)0x0008)
430 #define UART_SCCM_BSY ((ushort)0x0004)
431 #define UART_SCCM_TX ((ushort)0x0002)
432 #define UART_SCCM_RX ((ushort)0x0001)
434 /* The SCC PMSR when used as a UART.
436 #define SCU_PSMR_FLC ((ushort)0x8000)
437 #define SCU_PSMR_SL ((ushort)0x4000)
438 #define SCU_PSMR_CL ((ushort)0x3000)
439 #define SCU_PSMR_UM ((ushort)0x0c00)
440 #define SCU_PSMR_FRZ ((ushort)0x0200)
441 #define SCU_PSMR_RZS ((ushort)0x0100)
442 #define SCU_PSMR_SYN ((ushort)0x0080)
443 #define SCU_PSMR_DRT ((ushort)0x0040)
444 #define SCU_PSMR_PEN ((ushort)0x0010)
445 #define SCU_PSMR_RPM ((ushort)0x000c)
446 #define SCU_PSMR_REVP ((ushort)0x0008)
447 #define SCU_PSMR_TPM ((ushort)0x0003)
448 #define SCU_PSMR_TEVP ((ushort)0x0002)
450 /* CPM Transparent mode SCC.
452 typedef struct scc_trans
{
454 uint st_cpres
; /* Preset CRC */
455 uint st_cmask
; /* Constant mask for CRC */
458 /* IIC parameter RAM.
461 ushort iic_rbase
; /* Rx Buffer descriptor base address */
462 ushort iic_tbase
; /* Tx Buffer descriptor base address */
463 u_char iic_rfcr
; /* Rx function code */
464 u_char iic_tfcr
; /* Tx function code */
465 ushort iic_mrblr
; /* Max receive buffer length */
466 uint iic_rstate
; /* Internal */
467 uint iic_rdp
; /* Internal */
468 ushort iic_rbptr
; /* Internal */
469 ushort iic_rbc
; /* Internal */
470 uint iic_rxtmp
; /* Internal */
471 uint iic_tstate
; /* Internal */
472 uint iic_tdp
; /* Internal */
473 ushort iic_tbptr
; /* Internal */
474 ushort iic_tbc
; /* Internal */
475 uint iic_txtmp
; /* Internal */
476 char res1
[4]; /* Reserved */
477 ushort iic_rpbase
; /* Relocation pointer */
478 char res2
[2]; /* Reserved */
481 /* SPI parameter RAM.
484 ushort spi_rbase
; /* Rx Buffer descriptor base address */
485 ushort spi_tbase
; /* Tx Buffer descriptor base address */
486 u_char spi_rfcr
; /* Rx function code */
487 u_char spi_tfcr
; /* Tx function code */
488 ushort spi_mrblr
; /* Max receive buffer length */
489 uint spi_rstate
; /* Internal */
490 uint spi_rdp
; /* Internal */
491 ushort spi_rbptr
; /* Internal */
492 ushort spi_rbc
; /* Internal */
493 uint spi_rxtmp
; /* Internal */
494 uint spi_tstate
; /* Internal */
495 uint spi_tdp
; /* Internal */
496 ushort spi_tbptr
; /* Internal */
497 ushort spi_tbc
; /* Internal */
498 uint spi_txtmp
; /* Internal */
500 ushort spi_rpbase
; /* Relocation pointer */
504 /* SPI Mode register.
506 #define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
507 #define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
508 #define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
509 #define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
510 #define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
511 #define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
512 #define SPMODE_EN ((ushort)0x0100) /* Enable */
513 #define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
514 #define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
515 #define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
516 #define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
517 #define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
520 #define SPIE_MME 0x20
521 #define SPIE_TXE 0x10
522 #define SPIE_BSY 0x04
523 #define SPIE_TXB 0x02
524 #define SPIE_RXB 0x01
527 * RISC Controller Configuration Register definitons
529 #define RCCR_TIME 0x8000 /* RISC Timer Enable */
530 #define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
531 #define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
533 /* RISC Timer Parameter RAM offset */
534 #define PROFF_RTMR ((uint)0x01B0)
536 typedef struct risc_timer_pram
{
537 unsigned short tm_base
; /* RISC Timer Table Base Address */
538 unsigned short tm_ptr
; /* RISC Timer Table Pointer (internal) */
539 unsigned short r_tmr
; /* RISC Timer Mode Register */
540 unsigned short r_tmv
; /* RISC Timer Valid Register */
541 unsigned long tm_cmd
; /* RISC Timer Command Register */
542 unsigned long tm_cnt
; /* RISC Timer Internal Count */
545 /* Bits in RISC Timer Command Register */
546 #define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
547 #define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
548 #define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
549 #define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
550 #define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
552 /* CPM interrupts. There are nearly 32 interrupts generated by CPM
553 * channels or devices. All of these are presented to the PPC core
554 * as a single interrupt. The CPM interrupt handler dispatches its
555 * own handlers, in a similar fashion to the PPC core handler. We
556 * use the table as defined in the manuals (i.e. no special high
557 * priority and SCC1 == SCCa, etc...).
560 #define CPMVEC_PIO_PC15 ((ushort)0x1f)
561 #define CPMVEC_SCC1 ((ushort)0x1e)
562 #define CPMVEC_SCC2 ((ushort)0x1d)
563 #define CPMVEC_SCC3 ((ushort)0x1c)
564 #define CPMVEC_SCC4 ((ushort)0x1b)
565 #define CPMVEC_PIO_PC14 ((ushort)0x1a)
566 #define CPMVEC_TIMER1 ((ushort)0x19)
567 #define CPMVEC_PIO_PC13 ((ushort)0x18)
568 #define CPMVEC_PIO_PC12 ((ushort)0x17)
569 #define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
570 #define CPMVEC_IDMA1 ((ushort)0x15)
571 #define CPMVEC_IDMA2 ((ushort)0x14)
572 #define CPMVEC_TIMER2 ((ushort)0x12)
573 #define CPMVEC_RISCTIMER ((ushort)0x11)
574 #define CPMVEC_I2C ((ushort)0x10)
575 #define CPMVEC_PIO_PC11 ((ushort)0x0f)
576 #define CPMVEC_PIO_PC10 ((ushort)0x0e)
577 #define CPMVEC_TIMER3 ((ushort)0x0c)
578 #define CPMVEC_PIO_PC9 ((ushort)0x0b)
579 #define CPMVEC_PIO_PC8 ((ushort)0x0a)
580 #define CPMVEC_PIO_PC7 ((ushort)0x09)
581 #define CPMVEC_TIMER4 ((ushort)0x07)
582 #define CPMVEC_PIO_PC6 ((ushort)0x06)
583 #define CPMVEC_SPI ((ushort)0x05)
584 #define CPMVEC_SMC1 ((ushort)0x04)
585 #define CPMVEC_SMC2 ((ushort)0x03)
586 #define CPMVEC_PIO_PC5 ((ushort)0x02)
587 #define CPMVEC_PIO_PC4 ((ushort)0x01)
588 #define CPMVEC_ERROR ((ushort)0x00)
590 /* CPM interrupt configuration vector.
592 #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
593 #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
594 #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
595 #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
596 #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
597 #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
598 #define CICR_IEN ((uint)0x00000080) /* Int. enable */
599 #define CICR_SPS ((uint)0x00000001) /* SCC Spread */
601 #define CPM_PIN_INPUT 0
602 #define CPM_PIN_OUTPUT 1
603 #define CPM_PIN_PRIMARY 0
604 #define CPM_PIN_SECONDARY 2
605 #define CPM_PIN_GPIO 4
606 #define CPM_PIN_OPENDRAIN 8
616 void cpm1_set_pin(enum cpm_port port
, int pin
, int flags
);
624 enum cpm_clk_target
{
634 CPM_BRG1
, /* Baud Rate Generator 1 */
635 CPM_BRG2
, /* Baud Rate Generator 2 */
636 CPM_BRG3
, /* Baud Rate Generator 3 */
637 CPM_BRG4
, /* Baud Rate Generator 4 */
638 CPM_CLK1
, /* Clock 1 */
639 CPM_CLK2
, /* Clock 2 */
640 CPM_CLK3
, /* Clock 3 */
641 CPM_CLK4
, /* Clock 4 */
642 CPM_CLK5
, /* Clock 5 */
643 CPM_CLK6
, /* Clock 6 */
644 CPM_CLK7
, /* Clock 7 */
645 CPM_CLK8
, /* Clock 8 */
648 int cpm1_clk_setup(enum cpm_clk_target target
, int clock
, int mode
);
650 #endif /* __CPM1__ */