arch/powerpc/platforms/cell/celleb_scc_uhc.c

   1 /*
   2  * SCC (Super Companion Chip) UHC setup
   3  *
   4  * (C) Copyright 2006-2007 TOSHIBA CORPORATION
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License along
  17  * with this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  19  */
  20
  21 #include <linux/kernel.h>
  22 #include <linux/pci.h>
  23
  24 #include <asm/delay.h>
  25 #include <asm/io.h>
  26 #include <asm/machdep.h>
  27
  28 #include "celleb_scc.h"
  29
  30 #define UHC_RESET_WAIT_MAX 10000
  31
  32 static inline int uhc_clkctrl_ready(u32 val)
  33 {
  34         const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN;
  35         return((val & mask) == mask);
  36 }
  37
  38 /*
  39  * UHC(usb host controller) enable function.
  40  * affect to both of OHCI and EHCI core module.
  41  */
  42 static void enable_scc_uhc(struct pci_dev *dev)
  43 {
  44         void __iomem *uhc_base;
  45         u32 __iomem *uhc_clkctrl;
  46         u32 __iomem *uhc_ecmode;
  47         u32 val = 0;
  48         int i;
  49
  50         if (!machine_is(celleb_beat) &&
  51             !machine_is(celleb_native))
  52                 return;
  53
  54         uhc_base = ioremap(pci_resource_start(dev, 0),
  55                            pci_resource_len(dev, 0));
  56         if (!uhc_base) {
  57                 printk(KERN_ERR "failed to map UHC register base.\n");
  58                 return;
  59         }
  60         uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL;
  61         uhc_ecmode  = uhc_base + SCC_UHC_ECMODE;
  62
  63         /* setup for normal mode */
  64         val |= SCC_UHC_F48MCKLEN;
  65         out_be32(uhc_clkctrl, val);
  66         val |= SCC_UHC_PHY_SUSPEND_SEL;
  67         out_be32(uhc_clkctrl, val);
  68         udelay(10);
  69         val |= SCC_UHC_PHYEN;
  70         out_be32(uhc_clkctrl, val);
  71         udelay(50);
  72
  73         /* disable reset */
  74         val |= SCC_UHC_HCLKEN;
  75         out_be32(uhc_clkctrl, val);
  76         val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN);
  77         out_be32(uhc_clkctrl, val);
  78         i = 0;
  79         while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) {
  80                 udelay(10);
  81                 if (i++ > UHC_RESET_WAIT_MAX) {
  82                         printk(KERN_ERR "Failed to disable UHC reset %x\n",
  83                                in_be32(uhc_clkctrl));
  84                         break;
  85                 }
  86         }
  87
  88         /* Endian Conversion Mode for Master ALL area */
  89         out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE);
  90
  91         iounmap(uhc_base);
  92 }
  93
  94 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
  95                  PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc);