1 #ifndef _ASM_X86_PGTABLE_3LEVEL_H
2 #define _ASM_X86_PGTABLE_3LEVEL_H
5 * Intel Physical Address Extension (PAE) Mode - three-level page
6 * tables on PPro+ CPUs.
8 * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
11 #define pte_ERROR(e) \
12 printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
13 __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
14 #define pmd_ERROR(e) \
15 printk("%s:%d: bad pmd %p(%016Lx).\n", \
16 __FILE__, __LINE__, &(e), pmd_val(e))
17 #define pgd_ERROR(e) \
18 printk("%s:%d: bad pgd %p(%016Lx).\n", \
19 __FILE__, __LINE__, &(e), pgd_val(e))
21 /* Rules for using set_pte: the pte being assigned *must* be
22 * either not present or in a state where the hardware will
23 * not attempt to update the pte. In places where this is
24 * not possible, use pte_get_and_clear to obtain the old pte
25 * value and then use set_pte to update it. -ben
27 static inline void native_set_pte(pte_t
*ptep
, pte_t pte
)
29 ptep
->pte_high
= pte
.pte_high
;
31 ptep
->pte_low
= pte
.pte_low
;
34 static inline void native_set_pte_atomic(pte_t
*ptep
, pte_t pte
)
36 set_64bit((unsigned long long *)(ptep
), native_pte_val(pte
));
39 static inline void native_set_pmd(pmd_t
*pmdp
, pmd_t pmd
)
41 set_64bit((unsigned long long *)(pmdp
), native_pmd_val(pmd
));
44 static inline void native_set_pud(pud_t
*pudp
, pud_t pud
)
46 set_64bit((unsigned long long *)(pudp
), native_pud_val(pud
));
50 * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
51 * entry, so clear the bottom half first and enforce ordering with a compiler
54 static inline void native_pte_clear(struct mm_struct
*mm
, unsigned long addr
,
62 static inline void native_pmd_clear(pmd_t
*pmd
)
64 u32
*tmp
= (u32
*)pmd
;
70 static inline void pud_clear(pud_t
*pudp
)
74 set_pud(pudp
, __pud(0));
77 * According to Intel App note "TLBs, Paging-Structure Caches,
78 * and Their Invalidation", April 2007, document 317080-001,
79 * section 8.1: in PAE mode we explicitly have to flush the
80 * TLB via cr3 if the top-level pgd is changed...
82 * Make sure the pud entry we're updating is within the
83 * current pgd to avoid unnecessary TLB flushes.
86 if (__pa(pudp
) >= pgd
&& __pa(pudp
) <
87 (pgd
+ sizeof(pgd_t
)*PTRS_PER_PGD
))
92 static inline pte_t
native_ptep_get_and_clear(pte_t
*ptep
)
96 /* xchg acts as a barrier before the setting of the high bits */
97 res
.pte_low
= xchg(&ptep
->pte_low
, 0);
98 res
.pte_high
= ptep
->pte_high
;
104 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
108 * Bits 0, 6 and 7 are taken in the low part of the pte,
109 * put the 32 bits of offset into the high part.
111 #define pte_to_pgoff(pte) ((pte).pte_high)
112 #define pgoff_to_pte(off) \
113 ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
114 #define PTE_FILE_MAX_BITS 32
116 /* Encode and de-code a swap entry */
117 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > 5)
118 #define __swp_type(x) (((x).val) & 0x1f)
119 #define __swp_offset(x) ((x).val >> 5)
120 #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
121 #define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
122 #define __swp_entry_to_pte(x) ((pte_t){ { .pte_high = (x).val } })
124 #endif /* _ASM_X86_PGTABLE_3LEVEL_H */