2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
5 * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/jiffies.h>
13 #include <linux/kernel.h>
14 #include <linux/skbuff.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/rcupdate.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
21 #include "ieee80211_i.h"
22 #include "driver-ops.h"
30 static u8
ieee80211_sta_manage_reorder_buf(struct ieee80211_hw
*hw
,
31 struct tid_ampdu_rx
*tid_agg_rx
,
33 struct ieee80211_rx_status
*status
,
37 * monitor mode reception
39 * This function cleans up the SKB, i.e. it removes all the stuff
40 * only useful for monitoring.
42 static struct sk_buff
*remove_monitor_info(struct ieee80211_local
*local
,
46 skb_pull(skb
, rtap_len
);
48 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
) {
49 if (likely(skb
->len
> FCS_LEN
))
50 skb_trim(skb
, skb
->len
- FCS_LEN
);
62 static inline int should_drop_frame(struct ieee80211_rx_status
*status
,
67 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
69 if (status
->flag
& (RX_FLAG_FAILED_FCS_CRC
| RX_FLAG_FAILED_PLCP_CRC
))
71 if (unlikely(skb
->len
< 16 + present_fcs_len
+ radiotap_len
))
73 if (ieee80211_is_ctl(hdr
->frame_control
) &&
74 !ieee80211_is_pspoll(hdr
->frame_control
) &&
75 !ieee80211_is_back_req(hdr
->frame_control
))
81 ieee80211_rx_radiotap_len(struct ieee80211_local
*local
,
82 struct ieee80211_rx_status
*status
)
86 /* always present fields */
87 len
= sizeof(struct ieee80211_radiotap_header
) + 9;
89 if (status
->flag
& RX_FLAG_TSFT
)
91 if (local
->hw
.flags
& IEEE80211_HW_SIGNAL_DBM
)
93 if (local
->hw
.flags
& IEEE80211_HW_NOISE_DBM
)
96 if (len
& 1) /* padding for RX_FLAGS if necessary */
99 /* make sure radiotap starts at a naturally aligned address */
101 len
= roundup(len
, 8);
107 * ieee80211_add_rx_radiotap_header - add radiotap header
109 * add a radiotap header containing all the fields which the hardware provided.
112 ieee80211_add_rx_radiotap_header(struct ieee80211_local
*local
,
114 struct ieee80211_rx_status
*status
,
115 struct ieee80211_rate
*rate
,
118 struct ieee80211_radiotap_header
*rthdr
;
121 rthdr
= (struct ieee80211_radiotap_header
*)skb_push(skb
, rtap_len
);
122 memset(rthdr
, 0, rtap_len
);
124 /* radiotap header, set always present flags */
126 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS
) |
127 (1 << IEEE80211_RADIOTAP_CHANNEL
) |
128 (1 << IEEE80211_RADIOTAP_ANTENNA
) |
129 (1 << IEEE80211_RADIOTAP_RX_FLAGS
));
130 rthdr
->it_len
= cpu_to_le16(rtap_len
);
132 pos
= (unsigned char *)(rthdr
+1);
134 /* the order of the following fields is important */
136 /* IEEE80211_RADIOTAP_TSFT */
137 if (status
->flag
& RX_FLAG_TSFT
) {
138 *(__le64
*)pos
= cpu_to_le64(status
->mactime
);
140 cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT
);
144 /* IEEE80211_RADIOTAP_FLAGS */
145 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
)
146 *pos
|= IEEE80211_RADIOTAP_F_FCS
;
147 if (status
->flag
& (RX_FLAG_FAILED_FCS_CRC
| RX_FLAG_FAILED_PLCP_CRC
))
148 *pos
|= IEEE80211_RADIOTAP_F_BADFCS
;
149 if (status
->flag
& RX_FLAG_SHORTPRE
)
150 *pos
|= IEEE80211_RADIOTAP_F_SHORTPRE
;
153 /* IEEE80211_RADIOTAP_RATE */
154 if (status
->flag
& RX_FLAG_HT
) {
156 * TODO: add following information into radiotap header once
157 * suitable fields are defined for it:
158 * - MCS index (status->rate_idx)
159 * - HT40 (status->flag & RX_FLAG_40MHZ)
160 * - short-GI (status->flag & RX_FLAG_SHORT_GI)
164 rthdr
->it_present
|= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE
);
165 *pos
= rate
->bitrate
/ 5;
169 /* IEEE80211_RADIOTAP_CHANNEL */
170 *(__le16
*)pos
= cpu_to_le16(status
->freq
);
172 if (status
->band
== IEEE80211_BAND_5GHZ
)
173 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
174 IEEE80211_CHAN_5GHZ
);
175 else if (rate
->flags
& IEEE80211_RATE_ERP_G
)
176 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
177 IEEE80211_CHAN_2GHZ
);
179 *(__le16
*)pos
= cpu_to_le16(IEEE80211_CHAN_CCK
|
180 IEEE80211_CHAN_2GHZ
);
183 /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
184 if (local
->hw
.flags
& IEEE80211_HW_SIGNAL_DBM
) {
185 *pos
= status
->signal
;
187 cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
191 /* IEEE80211_RADIOTAP_DBM_ANTNOISE */
192 if (local
->hw
.flags
& IEEE80211_HW_NOISE_DBM
) {
193 *pos
= status
->noise
;
195 cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE
);
199 /* IEEE80211_RADIOTAP_LOCK_QUALITY is missing */
201 /* IEEE80211_RADIOTAP_ANTENNA */
202 *pos
= status
->antenna
;
205 /* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */
207 /* IEEE80211_RADIOTAP_RX_FLAGS */
208 /* ensure 2 byte alignment for the 2 byte field as required */
209 if ((pos
- (unsigned char *)rthdr
) & 1)
211 if (status
->flag
& RX_FLAG_FAILED_PLCP_CRC
)
212 *(__le16
*)pos
|= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADPLCP
);
217 * This function copies a received frame to all monitor interfaces and
218 * returns a cleaned-up SKB that no longer includes the FCS nor the
219 * radiotap header the driver might have added.
221 static struct sk_buff
*
222 ieee80211_rx_monitor(struct ieee80211_local
*local
, struct sk_buff
*origskb
,
223 struct ieee80211_rx_status
*status
,
224 struct ieee80211_rate
*rate
)
226 struct ieee80211_sub_if_data
*sdata
;
227 int needed_headroom
= 0;
228 struct sk_buff
*skb
, *skb2
;
229 struct net_device
*prev_dev
= NULL
;
230 int present_fcs_len
= 0;
234 * First, we may need to make a copy of the skb because
235 * (1) we need to modify it for radiotap (if not present), and
236 * (2) the other RX handlers will modify the skb we got.
238 * We don't need to, of course, if we aren't going to return
239 * the SKB because it has a bad FCS/PLCP checksum.
241 if (status
->flag
& RX_FLAG_RADIOTAP
)
242 rtap_len
= ieee80211_get_radiotap_len(origskb
->data
);
244 /* room for the radiotap header based on driver features */
245 needed_headroom
= ieee80211_rx_radiotap_len(local
, status
);
247 if (local
->hw
.flags
& IEEE80211_HW_RX_INCLUDES_FCS
)
248 present_fcs_len
= FCS_LEN
;
250 if (!local
->monitors
) {
251 if (should_drop_frame(status
, origskb
, present_fcs_len
,
253 dev_kfree_skb(origskb
);
257 return remove_monitor_info(local
, origskb
, rtap_len
);
260 if (should_drop_frame(status
, origskb
, present_fcs_len
, rtap_len
)) {
261 /* only need to expand headroom if necessary */
266 * This shouldn't trigger often because most devices have an
267 * RX header they pull before we get here, and that should
268 * be big enough for our radiotap information. We should
269 * probably export the length to drivers so that we can have
270 * them allocate enough headroom to start with.
272 if (skb_headroom(skb
) < needed_headroom
&&
273 pskb_expand_head(skb
, needed_headroom
, 0, GFP_ATOMIC
)) {
279 * Need to make a copy and possibly remove radiotap header
280 * and FCS from the original.
282 skb
= skb_copy_expand(origskb
, needed_headroom
, 0, GFP_ATOMIC
);
284 origskb
= remove_monitor_info(local
, origskb
, rtap_len
);
290 /* if necessary, prepend radiotap information */
291 if (!(status
->flag
& RX_FLAG_RADIOTAP
))
292 ieee80211_add_rx_radiotap_header(local
, skb
, status
, rate
,
295 skb_reset_mac_header(skb
);
296 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
297 skb
->pkt_type
= PACKET_OTHERHOST
;
298 skb
->protocol
= htons(ETH_P_802_2
);
300 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
301 if (!netif_running(sdata
->dev
))
304 if (sdata
->vif
.type
!= NL80211_IFTYPE_MONITOR
)
307 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
)
311 skb2
= skb_clone(skb
, GFP_ATOMIC
);
313 skb2
->dev
= prev_dev
;
318 prev_dev
= sdata
->dev
;
319 sdata
->dev
->stats
.rx_packets
++;
320 sdata
->dev
->stats
.rx_bytes
+= skb
->len
;
333 static void ieee80211_parse_qos(struct ieee80211_rx_data
*rx
)
335 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
338 /* does the frame have a qos control field? */
339 if (ieee80211_is_data_qos(hdr
->frame_control
)) {
340 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
341 /* frame has qos control */
342 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
343 if (*qc
& IEEE80211_QOS_CONTROL_A_MSDU_PRESENT
)
344 rx
->flags
|= IEEE80211_RX_AMSDU
;
346 rx
->flags
&= ~IEEE80211_RX_AMSDU
;
349 * IEEE 802.11-2007, 7.1.3.4.1 ("Sequence Number field"):
351 * Sequence numbers for management frames, QoS data
352 * frames with a broadcast/multicast address in the
353 * Address 1 field, and all non-QoS data frames sent
354 * by QoS STAs are assigned using an additional single
355 * modulo-4096 counter, [...]
357 * We also use that counter for non-QoS STAs.
359 tid
= NUM_RX_DATA_QUEUES
- 1;
363 /* Set skb->priority to 1d tag if highest order bit of TID is not set.
364 * For now, set skb->priority to 0 for other cases. */
365 rx
->skb
->priority
= (tid
> 7) ? 0 : tid
;
369 * DOC: Packet alignment
371 * Drivers always need to pass packets that are aligned to two-byte boundaries
374 * Additionally, should, if possible, align the payload data in a way that
375 * guarantees that the contained IP header is aligned to a four-byte
376 * boundary. In the case of regular frames, this simply means aligning the
377 * payload to a four-byte boundary (because either the IP header is directly
378 * contained, or IV/RFC1042 headers that have a length divisible by four are
381 * With A-MSDU frames, however, the payload data address must yield two modulo
382 * four because there are 14-byte 802.3 headers within the A-MSDU frames that
383 * push the IP header further back to a multiple of four again. Thankfully, the
384 * specs were sane enough this time around to require padding each A-MSDU
385 * subframe to a length that is a multiple of four.
387 * Padding like Atheros hardware adds which is inbetween the 802.11 header and
388 * the payload is not supported, the driver is required to move the 802.11
389 * header to be directly in front of the payload in that case.
391 static void ieee80211_verify_alignment(struct ieee80211_rx_data
*rx
)
393 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
396 #ifndef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
400 if (WARN_ONCE((unsigned long)rx
->skb
->data
& 1,
401 "unaligned packet at 0x%p\n", rx
->skb
->data
))
404 if (!ieee80211_is_data_present(hdr
->frame_control
))
407 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
408 if (rx
->flags
& IEEE80211_RX_AMSDU
)
410 WARN_ONCE(((unsigned long)(rx
->skb
->data
+ hdrlen
)) & 3,
411 "unaligned IP payload at 0x%p\n", rx
->skb
->data
+ hdrlen
);
417 static ieee80211_rx_result debug_noinline
418 ieee80211_rx_h_passive_scan(struct ieee80211_rx_data
*rx
)
420 struct ieee80211_local
*local
= rx
->local
;
421 struct sk_buff
*skb
= rx
->skb
;
423 if (unlikely(local
->hw_scanning
))
424 return ieee80211_scan_rx(rx
->sdata
, skb
, rx
->status
);
426 if (unlikely(local
->sw_scanning
)) {
427 /* drop all the other packets during a software scan anyway */
428 if (ieee80211_scan_rx(rx
->sdata
, skb
, rx
->status
)
434 if (unlikely(rx
->flags
& IEEE80211_RX_IN_SCAN
)) {
435 /* scanning finished during invoking of handlers */
436 I802_DEBUG_INC(local
->rx_handlers_drop_passive_scan
);
437 return RX_DROP_UNUSABLE
;
444 static int ieee80211_is_unicast_robust_mgmt_frame(struct sk_buff
*skb
)
446 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
448 if (skb
->len
< 24 || is_multicast_ether_addr(hdr
->addr1
))
451 return ieee80211_is_robust_mgmt_frame(hdr
);
455 static int ieee80211_is_multicast_robust_mgmt_frame(struct sk_buff
*skb
)
457 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
459 if (skb
->len
< 24 || !is_multicast_ether_addr(hdr
->addr1
))
462 return ieee80211_is_robust_mgmt_frame(hdr
);
466 /* Get the BIP key index from MMIE; return -1 if this is not a BIP frame */
467 static int ieee80211_get_mmie_keyidx(struct sk_buff
*skb
)
469 struct ieee80211_mgmt
*hdr
= (struct ieee80211_mgmt
*) skb
->data
;
470 struct ieee80211_mmie
*mmie
;
472 if (skb
->len
< 24 + sizeof(*mmie
) ||
473 !is_multicast_ether_addr(hdr
->da
))
476 if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr
*) hdr
))
477 return -1; /* not a robust management frame */
479 mmie
= (struct ieee80211_mmie
*)
480 (skb
->data
+ skb
->len
- sizeof(*mmie
));
481 if (mmie
->element_id
!= WLAN_EID_MMIE
||
482 mmie
->length
!= sizeof(*mmie
) - 2)
485 return le16_to_cpu(mmie
->key_id
);
489 static ieee80211_rx_result
490 ieee80211_rx_mesh_check(struct ieee80211_rx_data
*rx
)
492 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
493 unsigned int hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
495 if (ieee80211_is_data(hdr
->frame_control
)) {
496 if (!ieee80211_has_a4(hdr
->frame_control
))
497 return RX_DROP_MONITOR
;
498 if (memcmp(hdr
->addr4
, rx
->dev
->dev_addr
, ETH_ALEN
) == 0)
499 return RX_DROP_MONITOR
;
502 /* If there is not an established peer link and this is not a peer link
503 * establisment frame, beacon or probe, drop the frame.
506 if (!rx
->sta
|| sta_plink_state(rx
->sta
) != PLINK_ESTAB
) {
507 struct ieee80211_mgmt
*mgmt
;
509 if (!ieee80211_is_mgmt(hdr
->frame_control
))
510 return RX_DROP_MONITOR
;
512 if (ieee80211_is_action(hdr
->frame_control
)) {
513 mgmt
= (struct ieee80211_mgmt
*)hdr
;
514 if (mgmt
->u
.action
.category
!= PLINK_CATEGORY
)
515 return RX_DROP_MONITOR
;
519 if (ieee80211_is_probe_req(hdr
->frame_control
) ||
520 ieee80211_is_probe_resp(hdr
->frame_control
) ||
521 ieee80211_is_beacon(hdr
->frame_control
))
524 return RX_DROP_MONITOR
;
528 #define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l))
530 if (ieee80211_is_data(hdr
->frame_control
) &&
531 is_multicast_ether_addr(hdr
->addr1
) &&
532 mesh_rmc_check(hdr
->addr4
, msh_h_get(hdr
, hdrlen
), rx
->sdata
))
533 return RX_DROP_MONITOR
;
540 static ieee80211_rx_result debug_noinline
541 ieee80211_rx_h_check(struct ieee80211_rx_data
*rx
)
543 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
545 /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
546 if (rx
->sta
&& !is_multicast_ether_addr(hdr
->addr1
)) {
547 if (unlikely(ieee80211_has_retry(hdr
->frame_control
) &&
548 rx
->sta
->last_seq_ctrl
[rx
->queue
] ==
550 if (rx
->flags
& IEEE80211_RX_RA_MATCH
) {
551 rx
->local
->dot11FrameDuplicateCount
++;
552 rx
->sta
->num_duplicates
++;
554 return RX_DROP_MONITOR
;
556 rx
->sta
->last_seq_ctrl
[rx
->queue
] = hdr
->seq_ctrl
;
559 if (unlikely(rx
->skb
->len
< 16)) {
560 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_short
);
561 return RX_DROP_MONITOR
;
564 /* Drop disallowed frame classes based on STA auth/assoc state;
565 * IEEE 802.11, Chap 5.5.
567 * mac80211 filters only based on association state, i.e. it drops
568 * Class 3 frames from not associated stations. hostapd sends
569 * deauth/disassoc frames when needed. In addition, hostapd is
570 * responsible for filtering on both auth and assoc states.
573 if (ieee80211_vif_is_mesh(&rx
->sdata
->vif
))
574 return ieee80211_rx_mesh_check(rx
);
576 if (unlikely((ieee80211_is_data(hdr
->frame_control
) ||
577 ieee80211_is_pspoll(hdr
->frame_control
)) &&
578 rx
->sdata
->vif
.type
!= NL80211_IFTYPE_ADHOC
&&
579 (!rx
->sta
|| !test_sta_flags(rx
->sta
, WLAN_STA_ASSOC
)))) {
580 if ((!ieee80211_has_fromds(hdr
->frame_control
) &&
581 !ieee80211_has_tods(hdr
->frame_control
) &&
582 ieee80211_is_data(hdr
->frame_control
)) ||
583 !(rx
->flags
& IEEE80211_RX_RA_MATCH
)) {
584 /* Drop IBSS frames and frames for other hosts
586 return RX_DROP_MONITOR
;
589 return RX_DROP_MONITOR
;
596 static ieee80211_rx_result debug_noinline
597 ieee80211_rx_h_decrypt(struct ieee80211_rx_data
*rx
)
599 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
602 ieee80211_rx_result result
= RX_DROP_UNUSABLE
;
603 struct ieee80211_key
*stakey
= NULL
;
604 int mmie_keyidx
= -1;
609 * There are four types of keys:
611 * - IGTK (group keys for management frames)
612 * - PTK (pairwise keys)
613 * - STK (station-to-station pairwise keys)
615 * When selecting a key, we have to distinguish between multicast
616 * (including broadcast) and unicast frames, the latter can only
617 * use PTKs and STKs while the former always use GTKs and IGTKs.
618 * Unless, of course, actual WEP keys ("pre-RSNA") are used, then
619 * unicast frames can also use key indices like GTKs. Hence, if we
620 * don't have a PTK/STK we check the key index for a WEP key.
622 * Note that in a regular BSS, multicast frames are sent by the
623 * AP only, associated stations unicast the frame to the AP first
624 * which then multicasts it on their behalf.
626 * There is also a slight problem in IBSS mode: GTKs are negotiated
627 * with each station, that is something we don't currently handle.
628 * The spec seems to expect that one negotiates the same key with
629 * every station but there's no such requirement; VLANs could be
634 * No point in finding a key and decrypting if the frame is neither
635 * addressed to us nor a multicast frame.
637 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
641 stakey
= rcu_dereference(rx
->sta
->key
);
643 if (!ieee80211_has_protected(hdr
->frame_control
))
644 mmie_keyidx
= ieee80211_get_mmie_keyidx(rx
->skb
);
646 if (!is_multicast_ether_addr(hdr
->addr1
) && stakey
) {
648 /* Skip decryption if the frame is not protected. */
649 if (!ieee80211_has_protected(hdr
->frame_control
))
651 } else if (mmie_keyidx
>= 0) {
652 /* Broadcast/multicast robust management frame / BIP */
653 if ((rx
->status
->flag
& RX_FLAG_DECRYPTED
) &&
654 (rx
->status
->flag
& RX_FLAG_IV_STRIPPED
))
657 if (mmie_keyidx
< NUM_DEFAULT_KEYS
||
658 mmie_keyidx
>= NUM_DEFAULT_KEYS
+ NUM_DEFAULT_MGMT_KEYS
)
659 return RX_DROP_MONITOR
; /* unexpected BIP keyidx */
660 rx
->key
= rcu_dereference(rx
->sdata
->keys
[mmie_keyidx
]);
661 } else if (!ieee80211_has_protected(hdr
->frame_control
)) {
663 * The frame was not protected, so skip decryption. However, we
664 * need to set rx->key if there is a key that could have been
665 * used so that the frame may be dropped if encryption would
666 * have been expected.
668 struct ieee80211_key
*key
= NULL
;
669 if (ieee80211_is_mgmt(hdr
->frame_control
) &&
670 is_multicast_ether_addr(hdr
->addr1
) &&
671 (key
= rcu_dereference(rx
->sdata
->default_mgmt_key
)))
673 else if ((key
= rcu_dereference(rx
->sdata
->default_key
)))
678 * The device doesn't give us the IV so we won't be
679 * able to look up the key. That's ok though, we
680 * don't need to decrypt the frame, we just won't
681 * be able to keep statistics accurate.
682 * Except for key threshold notifications, should
683 * we somehow allow the driver to tell us which key
684 * the hardware used if this flag is set?
686 if ((rx
->status
->flag
& RX_FLAG_DECRYPTED
) &&
687 (rx
->status
->flag
& RX_FLAG_IV_STRIPPED
))
690 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
692 if (rx
->skb
->len
< 8 + hdrlen
)
693 return RX_DROP_UNUSABLE
; /* TODO: count this? */
696 * no need to call ieee80211_wep_get_keyidx,
697 * it verifies a bunch of things we've done already
699 keyidx
= rx
->skb
->data
[hdrlen
+ 3] >> 6;
701 rx
->key
= rcu_dereference(rx
->sdata
->keys
[keyidx
]);
704 * RSNA-protected unicast frames should always be sent with
705 * pairwise or station-to-station keys, but for WEP we allow
706 * using a key index as well.
708 if (rx
->key
&& rx
->key
->conf
.alg
!= ALG_WEP
&&
709 !is_multicast_ether_addr(hdr
->addr1
))
714 rx
->key
->tx_rx_count
++;
715 /* TODO: add threshold stuff again */
717 return RX_DROP_MONITOR
;
720 /* Check for weak IVs if possible */
721 if (rx
->sta
&& rx
->key
->conf
.alg
== ALG_WEP
&&
722 ieee80211_is_data(hdr
->frame_control
) &&
723 (!(rx
->status
->flag
& RX_FLAG_IV_STRIPPED
) ||
724 !(rx
->status
->flag
& RX_FLAG_DECRYPTED
)) &&
725 ieee80211_wep_is_weak_iv(rx
->skb
, rx
->key
))
726 rx
->sta
->wep_weak_iv_count
++;
728 switch (rx
->key
->conf
.alg
) {
730 result
= ieee80211_crypto_wep_decrypt(rx
);
733 result
= ieee80211_crypto_tkip_decrypt(rx
);
736 result
= ieee80211_crypto_ccmp_decrypt(rx
);
739 result
= ieee80211_crypto_aes_cmac_decrypt(rx
);
743 /* either the frame has been decrypted or will be dropped */
744 rx
->status
->flag
|= RX_FLAG_DECRYPTED
;
749 static ieee80211_rx_result debug_noinline
750 ieee80211_rx_h_check_more_data(struct ieee80211_rx_data
*rx
)
752 struct ieee80211_local
*local
;
753 struct ieee80211_hdr
*hdr
;
758 hdr
= (struct ieee80211_hdr
*) skb
->data
;
760 if (!local
->pspolling
)
763 if (!ieee80211_has_fromds(hdr
->frame_control
))
764 /* this is not from AP */
767 if (!ieee80211_is_data(hdr
->frame_control
))
770 if (!ieee80211_has_moredata(hdr
->frame_control
)) {
771 /* AP has no more frames buffered for us */
772 local
->pspolling
= false;
776 /* more data bit is set, let's request a new frame from the AP */
777 ieee80211_send_pspoll(local
, rx
->sdata
);
782 static void ap_sta_ps_start(struct sta_info
*sta
)
784 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
785 struct ieee80211_local
*local
= sdata
->local
;
787 atomic_inc(&sdata
->bss
->num_sta_ps
);
788 set_and_clear_sta_flags(sta
, WLAN_STA_PS
, WLAN_STA_PSPOLL
);
789 drv_sta_notify(local
, &sdata
->vif
, STA_NOTIFY_SLEEP
, &sta
->sta
);
790 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
791 printk(KERN_DEBUG
"%s: STA %pM aid %d enters power save mode\n",
792 sdata
->dev
->name
, sta
->sta
.addr
, sta
->sta
.aid
);
793 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
796 static int ap_sta_ps_end(struct sta_info
*sta
)
798 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
799 struct ieee80211_local
*local
= sdata
->local
;
802 atomic_dec(&sdata
->bss
->num_sta_ps
);
804 clear_sta_flags(sta
, WLAN_STA_PS
| WLAN_STA_PSPOLL
);
805 drv_sta_notify(local
, &sdata
->vif
, STA_NOTIFY_AWAKE
, &sta
->sta
);
807 if (!skb_queue_empty(&sta
->ps_tx_buf
))
808 sta_info_clear_tim_bit(sta
);
810 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
811 printk(KERN_DEBUG
"%s: STA %pM aid %d exits power save mode\n",
812 sdata
->dev
->name
, sta
->sta
.addr
, sta
->sta
.aid
);
813 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
815 /* Send all buffered frames to the station */
816 sent
= ieee80211_add_pending_skbs(local
, &sta
->tx_filtered
);
817 buffered
= ieee80211_add_pending_skbs(local
, &sta
->ps_tx_buf
);
819 local
->total_ps_buffered
-= buffered
;
821 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
822 printk(KERN_DEBUG
"%s: STA %pM aid %d sending %d filtered/%d PS frames "
823 "since STA not sleeping anymore\n", sdata
->dev
->name
,
824 sta
->sta
.addr
, sta
->sta
.aid
, sent
- buffered
, buffered
);
825 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
830 static ieee80211_rx_result debug_noinline
831 ieee80211_rx_h_sta_process(struct ieee80211_rx_data
*rx
)
833 struct sta_info
*sta
= rx
->sta
;
834 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
839 /* Update last_rx only for IBSS packets which are for the current
840 * BSSID to avoid keeping the current IBSS network alive in cases where
841 * other STAs are using different BSSID. */
842 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
843 u8
*bssid
= ieee80211_get_bssid(hdr
, rx
->skb
->len
,
844 NL80211_IFTYPE_ADHOC
);
845 if (compare_ether_addr(bssid
, rx
->sdata
->u
.ibss
.bssid
) == 0)
846 sta
->last_rx
= jiffies
;
848 if (!is_multicast_ether_addr(hdr
->addr1
) ||
849 rx
->sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
850 /* Update last_rx only for unicast frames in order to prevent
851 * the Probe Request frames (the only broadcast frames from a
852 * STA in infrastructure mode) from keeping a connection alive.
853 * Mesh beacons will update last_rx when if they are found to
854 * match the current local configuration when processed.
856 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_STATION
&&
857 ieee80211_is_beacon(hdr
->frame_control
)) {
858 rx
->sdata
->u
.mgd
.last_beacon
= jiffies
;
860 sta
->last_rx
= jiffies
;
863 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
866 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
867 ieee80211_sta_rx_notify(rx
->sdata
, hdr
);
870 sta
->rx_bytes
+= rx
->skb
->len
;
871 sta
->last_signal
= rx
->status
->signal
;
872 sta
->last_qual
= rx
->status
->qual
;
873 sta
->last_noise
= rx
->status
->noise
;
876 * Change STA power saving mode only at the end of a frame
879 if (!ieee80211_has_morefrags(hdr
->frame_control
) &&
880 (rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
881 rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)) {
882 if (test_sta_flags(sta
, WLAN_STA_PS
)) {
884 * Ignore doze->wake transitions that are
885 * indicated by non-data frames, the standard
886 * is unclear here, but for example going to
887 * PS mode and then scanning would cause a
888 * doze->wake transition for the probe request,
889 * and that is clearly undesirable.
891 if (ieee80211_is_data(hdr
->frame_control
) &&
892 !ieee80211_has_pm(hdr
->frame_control
))
893 rx
->sent_ps_buffered
+= ap_sta_ps_end(sta
);
895 if (ieee80211_has_pm(hdr
->frame_control
))
896 ap_sta_ps_start(sta
);
900 /* Drop data::nullfunc frames silently, since they are used only to
901 * control station power saving mode. */
902 if (ieee80211_is_nullfunc(hdr
->frame_control
)) {
903 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_nullfunc
);
904 /* Update counter and free packet here to avoid counting this
905 * as a dropped packed. */
907 dev_kfree_skb(rx
->skb
);
912 } /* ieee80211_rx_h_sta_process */
914 static inline struct ieee80211_fragment_entry
*
915 ieee80211_reassemble_add(struct ieee80211_sub_if_data
*sdata
,
916 unsigned int frag
, unsigned int seq
, int rx_queue
,
917 struct sk_buff
**skb
)
919 struct ieee80211_fragment_entry
*entry
;
922 idx
= sdata
->fragment_next
;
923 entry
= &sdata
->fragments
[sdata
->fragment_next
++];
924 if (sdata
->fragment_next
>= IEEE80211_FRAGMENT_MAX
)
925 sdata
->fragment_next
= 0;
927 if (!skb_queue_empty(&entry
->skb_list
)) {
928 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
929 struct ieee80211_hdr
*hdr
=
930 (struct ieee80211_hdr
*) entry
->skb_list
.next
->data
;
931 printk(KERN_DEBUG
"%s: RX reassembly removed oldest "
932 "fragment entry (idx=%d age=%lu seq=%d last_frag=%d "
933 "addr1=%pM addr2=%pM\n",
934 sdata
->dev
->name
, idx
,
935 jiffies
- entry
->first_frag_time
, entry
->seq
,
936 entry
->last_frag
, hdr
->addr1
, hdr
->addr2
);
938 __skb_queue_purge(&entry
->skb_list
);
941 __skb_queue_tail(&entry
->skb_list
, *skb
); /* no need for locking */
943 entry
->first_frag_time
= jiffies
;
945 entry
->rx_queue
= rx_queue
;
946 entry
->last_frag
= frag
;
948 entry
->extra_len
= 0;
953 static inline struct ieee80211_fragment_entry
*
954 ieee80211_reassemble_find(struct ieee80211_sub_if_data
*sdata
,
955 unsigned int frag
, unsigned int seq
,
956 int rx_queue
, struct ieee80211_hdr
*hdr
)
958 struct ieee80211_fragment_entry
*entry
;
961 idx
= sdata
->fragment_next
;
962 for (i
= 0; i
< IEEE80211_FRAGMENT_MAX
; i
++) {
963 struct ieee80211_hdr
*f_hdr
;
967 idx
= IEEE80211_FRAGMENT_MAX
- 1;
969 entry
= &sdata
->fragments
[idx
];
970 if (skb_queue_empty(&entry
->skb_list
) || entry
->seq
!= seq
||
971 entry
->rx_queue
!= rx_queue
||
972 entry
->last_frag
+ 1 != frag
)
975 f_hdr
= (struct ieee80211_hdr
*)entry
->skb_list
.next
->data
;
978 * Check ftype and addresses are equal, else check next fragment
980 if (((hdr
->frame_control
^ f_hdr
->frame_control
) &
981 cpu_to_le16(IEEE80211_FCTL_FTYPE
)) ||
982 compare_ether_addr(hdr
->addr1
, f_hdr
->addr1
) != 0 ||
983 compare_ether_addr(hdr
->addr2
, f_hdr
->addr2
) != 0)
986 if (time_after(jiffies
, entry
->first_frag_time
+ 2 * HZ
)) {
987 __skb_queue_purge(&entry
->skb_list
);
996 static ieee80211_rx_result debug_noinline
997 ieee80211_rx_h_defragment(struct ieee80211_rx_data
*rx
)
999 struct ieee80211_hdr
*hdr
;
1002 unsigned int frag
, seq
;
1003 struct ieee80211_fragment_entry
*entry
;
1004 struct sk_buff
*skb
;
1006 hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
1007 fc
= hdr
->frame_control
;
1008 sc
= le16_to_cpu(hdr
->seq_ctrl
);
1009 frag
= sc
& IEEE80211_SCTL_FRAG
;
1011 if (likely((!ieee80211_has_morefrags(fc
) && frag
== 0) ||
1012 (rx
->skb
)->len
< 24 ||
1013 is_multicast_ether_addr(hdr
->addr1
))) {
1014 /* not fragmented */
1017 I802_DEBUG_INC(rx
->local
->rx_handlers_fragments
);
1019 seq
= (sc
& IEEE80211_SCTL_SEQ
) >> 4;
1022 /* This is the first fragment of a new frame. */
1023 entry
= ieee80211_reassemble_add(rx
->sdata
, frag
, seq
,
1024 rx
->queue
, &(rx
->skb
));
1025 if (rx
->key
&& rx
->key
->conf
.alg
== ALG_CCMP
&&
1026 ieee80211_has_protected(fc
)) {
1027 /* Store CCMP PN so that we can verify that the next
1028 * fragment has a sequential PN value. */
1030 memcpy(entry
->last_pn
,
1031 rx
->key
->u
.ccmp
.rx_pn
[rx
->queue
],
1037 /* This is a fragment for a frame that should already be pending in
1038 * fragment cache. Add this fragment to the end of the pending entry.
1040 entry
= ieee80211_reassemble_find(rx
->sdata
, frag
, seq
, rx
->queue
, hdr
);
1042 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_defrag
);
1043 return RX_DROP_MONITOR
;
1046 /* Verify that MPDUs within one MSDU have sequential PN values.
1047 * (IEEE 802.11i, 8.3.3.4.5) */
1050 u8 pn
[CCMP_PN_LEN
], *rpn
;
1051 if (!rx
->key
|| rx
->key
->conf
.alg
!= ALG_CCMP
)
1052 return RX_DROP_UNUSABLE
;
1053 memcpy(pn
, entry
->last_pn
, CCMP_PN_LEN
);
1054 for (i
= CCMP_PN_LEN
- 1; i
>= 0; i
--) {
1059 rpn
= rx
->key
->u
.ccmp
.rx_pn
[rx
->queue
];
1060 if (memcmp(pn
, rpn
, CCMP_PN_LEN
))
1061 return RX_DROP_UNUSABLE
;
1062 memcpy(entry
->last_pn
, pn
, CCMP_PN_LEN
);
1065 skb_pull(rx
->skb
, ieee80211_hdrlen(fc
));
1066 __skb_queue_tail(&entry
->skb_list
, rx
->skb
);
1067 entry
->last_frag
= frag
;
1068 entry
->extra_len
+= rx
->skb
->len
;
1069 if (ieee80211_has_morefrags(fc
)) {
1074 rx
->skb
= __skb_dequeue(&entry
->skb_list
);
1075 if (skb_tailroom(rx
->skb
) < entry
->extra_len
) {
1076 I802_DEBUG_INC(rx
->local
->rx_expand_skb_head2
);
1077 if (unlikely(pskb_expand_head(rx
->skb
, 0, entry
->extra_len
,
1079 I802_DEBUG_INC(rx
->local
->rx_handlers_drop_defrag
);
1080 __skb_queue_purge(&entry
->skb_list
);
1081 return RX_DROP_UNUSABLE
;
1084 while ((skb
= __skb_dequeue(&entry
->skb_list
))) {
1085 memcpy(skb_put(rx
->skb
, skb
->len
), skb
->data
, skb
->len
);
1089 /* Complete frame has been reassembled - process it now */
1090 rx
->flags
|= IEEE80211_RX_FRAGMENTED
;
1094 rx
->sta
->rx_packets
++;
1095 if (is_multicast_ether_addr(hdr
->addr1
))
1096 rx
->local
->dot11MulticastReceivedFrameCount
++;
1098 ieee80211_led_rx(rx
->local
);
1102 static ieee80211_rx_result debug_noinline
1103 ieee80211_rx_h_ps_poll(struct ieee80211_rx_data
*rx
)
1105 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1106 struct sk_buff
*skb
;
1107 int no_pending_pkts
;
1108 __le16 fc
= ((struct ieee80211_hdr
*)rx
->skb
->data
)->frame_control
;
1110 if (likely(!rx
->sta
|| !ieee80211_is_pspoll(fc
) ||
1111 !(rx
->flags
& IEEE80211_RX_RA_MATCH
)))
1114 if ((sdata
->vif
.type
!= NL80211_IFTYPE_AP
) &&
1115 (sdata
->vif
.type
!= NL80211_IFTYPE_AP_VLAN
))
1116 return RX_DROP_UNUSABLE
;
1118 skb
= skb_dequeue(&rx
->sta
->tx_filtered
);
1120 skb
= skb_dequeue(&rx
->sta
->ps_tx_buf
);
1122 rx
->local
->total_ps_buffered
--;
1124 no_pending_pkts
= skb_queue_empty(&rx
->sta
->tx_filtered
) &&
1125 skb_queue_empty(&rx
->sta
->ps_tx_buf
);
1128 struct ieee80211_hdr
*hdr
=
1129 (struct ieee80211_hdr
*) skb
->data
;
1132 * Tell TX path to send one frame even though the STA may
1133 * still remain is PS mode after this frame exchange.
1135 set_sta_flags(rx
->sta
, WLAN_STA_PSPOLL
);
1137 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1138 printk(KERN_DEBUG
"STA %pM aid %d: PS Poll (entries after %d)\n",
1139 rx
->sta
->sta
.addr
, rx
->sta
->sta
.aid
,
1140 skb_queue_len(&rx
->sta
->ps_tx_buf
));
1141 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1143 /* Use MoreData flag to indicate whether there are more
1144 * buffered frames for this STA */
1145 if (no_pending_pkts
)
1146 hdr
->frame_control
&= cpu_to_le16(~IEEE80211_FCTL_MOREDATA
);
1148 hdr
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_MOREDATA
);
1150 dev_queue_xmit(skb
);
1152 if (no_pending_pkts
)
1153 sta_info_clear_tim_bit(rx
->sta
);
1154 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1155 } else if (!rx
->sent_ps_buffered
) {
1157 * FIXME: This can be the result of a race condition between
1158 * us expiring a frame and the station polling for it.
1159 * Should we send it a null-func frame indicating we
1160 * have nothing buffered for it?
1162 printk(KERN_DEBUG
"%s: STA %pM sent PS Poll even "
1163 "though there are no buffered frames for it\n",
1164 rx
->dev
->name
, rx
->sta
->sta
.addr
);
1165 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1168 /* Free PS Poll skb here instead of returning RX_DROP that would
1169 * count as an dropped frame. */
1170 dev_kfree_skb(rx
->skb
);
1175 static ieee80211_rx_result debug_noinline
1176 ieee80211_rx_h_remove_qos_control(struct ieee80211_rx_data
*rx
)
1178 u8
*data
= rx
->skb
->data
;
1179 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)data
;
1181 if (!ieee80211_is_data_qos(hdr
->frame_control
))
1184 /* remove the qos control field, update frame type and meta-data */
1185 memmove(data
+ IEEE80211_QOS_CTL_LEN
, data
,
1186 ieee80211_hdrlen(hdr
->frame_control
) - IEEE80211_QOS_CTL_LEN
);
1187 hdr
= (struct ieee80211_hdr
*)skb_pull(rx
->skb
, IEEE80211_QOS_CTL_LEN
);
1188 /* change frame type to non QOS */
1189 hdr
->frame_control
&= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
1195 ieee80211_802_1x_port_control(struct ieee80211_rx_data
*rx
)
1197 if (unlikely(!rx
->sta
||
1198 !test_sta_flags(rx
->sta
, WLAN_STA_AUTHORIZED
)))
1205 ieee80211_drop_unencrypted(struct ieee80211_rx_data
*rx
, __le16 fc
)
1208 * Pass through unencrypted frames if the hardware has
1209 * decrypted them already.
1211 if (rx
->status
->flag
& RX_FLAG_DECRYPTED
)
1214 /* Drop unencrypted frames if key is set. */
1215 if (unlikely(!ieee80211_has_protected(fc
) &&
1216 !ieee80211_is_nullfunc(fc
) &&
1217 ieee80211_is_data(fc
) &&
1218 (rx
->key
|| rx
->sdata
->drop_unencrypted
)))
1220 if (rx
->sta
&& test_sta_flags(rx
->sta
, WLAN_STA_MFP
)) {
1221 if (unlikely(ieee80211_is_unicast_robust_mgmt_frame(rx
->skb
) &&
1224 /* BIP does not use Protected field, so need to check MMIE */
1225 if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx
->skb
)
1226 && ieee80211_get_mmie_keyidx(rx
->skb
) < 0 &&
1230 * When using MFP, Action frames are not allowed prior to
1231 * having configured keys.
1233 if (unlikely(ieee80211_is_action(fc
) && !rx
->key
&&
1234 ieee80211_is_robust_mgmt_frame(
1235 (struct ieee80211_hdr
*) rx
->skb
->data
)))
1243 __ieee80211_data_to_8023(struct ieee80211_rx_data
*rx
)
1245 struct net_device
*dev
= rx
->dev
;
1246 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1248 return ieee80211_data_to_8023(rx
->skb
, dev
->dev_addr
, sdata
->vif
.type
);
1252 * requires that rx->skb is a frame with ethernet header
1254 static bool ieee80211_frame_allowed(struct ieee80211_rx_data
*rx
, __le16 fc
)
1256 static const u8 pae_group_addr
[ETH_ALEN
] __aligned(2)
1257 = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
1258 struct ethhdr
*ehdr
= (struct ethhdr
*) rx
->skb
->data
;
1261 * Allow EAPOL frames to us/the PAE group address regardless
1262 * of whether the frame was encrypted or not.
1264 if (ehdr
->h_proto
== htons(ETH_P_PAE
) &&
1265 (compare_ether_addr(ehdr
->h_dest
, rx
->dev
->dev_addr
) == 0 ||
1266 compare_ether_addr(ehdr
->h_dest
, pae_group_addr
) == 0))
1269 if (ieee80211_802_1x_port_control(rx
) ||
1270 ieee80211_drop_unencrypted(rx
, fc
))
1277 * requires that rx->skb is a frame with ethernet header
1280 ieee80211_deliver_skb(struct ieee80211_rx_data
*rx
)
1282 struct net_device
*dev
= rx
->dev
;
1283 struct ieee80211_local
*local
= rx
->local
;
1284 struct sk_buff
*skb
, *xmit_skb
;
1285 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1286 struct ethhdr
*ehdr
= (struct ethhdr
*) rx
->skb
->data
;
1287 struct sta_info
*dsta
;
1292 if ((sdata
->vif
.type
== NL80211_IFTYPE_AP
||
1293 sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) &&
1294 !(sdata
->flags
& IEEE80211_SDATA_DONT_BRIDGE_PACKETS
) &&
1295 (rx
->flags
& IEEE80211_RX_RA_MATCH
)) {
1296 if (is_multicast_ether_addr(ehdr
->h_dest
)) {
1298 * send multicast frames both to higher layers in
1299 * local net stack and back to the wireless medium
1301 xmit_skb
= skb_copy(skb
, GFP_ATOMIC
);
1302 if (!xmit_skb
&& net_ratelimit())
1303 printk(KERN_DEBUG
"%s: failed to clone "
1304 "multicast frame\n", dev
->name
);
1306 dsta
= sta_info_get(local
, skb
->data
);
1307 if (dsta
&& dsta
->sdata
->dev
== dev
) {
1309 * The destination station is associated to
1310 * this AP (in this VLAN), so send the frame
1311 * directly to it and do not pass it to local
1321 int align __maybe_unused
;
1323 #if defined(CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT) || !defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
1325 * 'align' will only take the values 0 or 2 here
1326 * since all frames are required to be aligned
1327 * to 2-byte boundaries when being passed to
1328 * mac80211. That also explains the __skb_push()
1331 align
= ((unsigned long)(skb
->data
+ sizeof(struct ethhdr
))) & 3;
1333 if (WARN_ON(skb_headroom(skb
) < 3)) {
1337 u8
*data
= skb
->data
;
1338 size_t len
= skb
->len
;
1339 u8
*new = __skb_push(skb
, align
);
1340 memmove(new, data
, len
);
1341 __skb_trim(skb
, len
);
1347 /* deliver to local stack */
1348 skb
->protocol
= eth_type_trans(skb
, dev
);
1349 memset(skb
->cb
, 0, sizeof(skb
->cb
));
1355 /* send to wireless media */
1356 xmit_skb
->protocol
= htons(ETH_P_802_3
);
1357 skb_reset_network_header(xmit_skb
);
1358 skb_reset_mac_header(xmit_skb
);
1359 dev_queue_xmit(xmit_skb
);
1363 static ieee80211_rx_result debug_noinline
1364 ieee80211_rx_h_amsdu(struct ieee80211_rx_data
*rx
)
1366 struct net_device
*dev
= rx
->dev
;
1367 struct ieee80211_local
*local
= rx
->local
;
1370 struct sk_buff
*skb
= rx
->skb
, *frame
= NULL
;
1371 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
1372 __le16 fc
= hdr
->frame_control
;
1373 const struct ethhdr
*eth
;
1378 if (unlikely(!ieee80211_is_data(fc
)))
1381 if (unlikely(!ieee80211_is_data_present(fc
)))
1382 return RX_DROP_MONITOR
;
1384 if (!(rx
->flags
& IEEE80211_RX_AMSDU
))
1387 err
= __ieee80211_data_to_8023(rx
);
1389 return RX_DROP_UNUSABLE
;
1393 dev
->stats
.rx_packets
++;
1394 dev
->stats
.rx_bytes
+= skb
->len
;
1396 /* skip the wrapping header */
1397 eth
= (struct ethhdr
*) skb_pull(skb
, sizeof(struct ethhdr
));
1399 return RX_DROP_UNUSABLE
;
1401 while (skb
!= frame
) {
1403 __be16 len
= eth
->h_proto
;
1404 unsigned int subframe_len
= sizeof(struct ethhdr
) + ntohs(len
);
1406 remaining
= skb
->len
;
1407 memcpy(dst
, eth
->h_dest
, ETH_ALEN
);
1408 memcpy(src
, eth
->h_source
, ETH_ALEN
);
1410 padding
= ((4 - subframe_len
) & 0x3);
1411 /* the last MSDU has no padding */
1412 if (subframe_len
> remaining
)
1413 return RX_DROP_UNUSABLE
;
1415 skb_pull(skb
, sizeof(struct ethhdr
));
1416 /* if last subframe reuse skb */
1417 if (remaining
<= subframe_len
+ padding
)
1421 * Allocate and reserve two bytes more for payload
1422 * alignment since sizeof(struct ethhdr) is 14.
1424 frame
= dev_alloc_skb(
1425 ALIGN(local
->hw
.extra_tx_headroom
, 4) +
1429 return RX_DROP_UNUSABLE
;
1432 ALIGN(local
->hw
.extra_tx_headroom
, 4) +
1433 sizeof(struct ethhdr
) + 2);
1434 memcpy(skb_put(frame
, ntohs(len
)), skb
->data
,
1437 eth
= (struct ethhdr
*) skb_pull(skb
, ntohs(len
) +
1440 dev_kfree_skb(frame
);
1441 return RX_DROP_UNUSABLE
;
1445 skb_reset_network_header(frame
);
1447 frame
->priority
= skb
->priority
;
1450 payload
= frame
->data
;
1451 ethertype
= (payload
[6] << 8) | payload
[7];
1453 if (likely((compare_ether_addr(payload
, rfc1042_header
) == 0 &&
1454 ethertype
!= ETH_P_AARP
&& ethertype
!= ETH_P_IPX
) ||
1455 compare_ether_addr(payload
,
1456 bridge_tunnel_header
) == 0)) {
1457 /* remove RFC1042 or Bridge-Tunnel
1458 * encapsulation and replace EtherType */
1460 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
1461 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
1463 memcpy(skb_push(frame
, sizeof(__be16
)),
1464 &len
, sizeof(__be16
));
1465 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
1466 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
1469 if (!ieee80211_frame_allowed(rx
, fc
)) {
1470 if (skb
== frame
) /* last frame */
1471 return RX_DROP_UNUSABLE
;
1472 dev_kfree_skb(frame
);
1476 ieee80211_deliver_skb(rx
);
1482 #ifdef CONFIG_MAC80211_MESH
1483 static ieee80211_rx_result
1484 ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data
*rx
)
1486 struct ieee80211_hdr
*hdr
;
1487 struct ieee80211s_hdr
*mesh_hdr
;
1488 unsigned int hdrlen
;
1489 struct sk_buff
*skb
= rx
->skb
, *fwd_skb
;
1491 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1492 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1493 mesh_hdr
= (struct ieee80211s_hdr
*) (skb
->data
+ hdrlen
);
1495 if (!ieee80211_is_data(hdr
->frame_control
))
1500 return RX_DROP_MONITOR
;
1502 if (mesh_hdr
->flags
& MESH_FLAGS_AE_A5_A6
){
1503 struct ieee80211_sub_if_data
*sdata
;
1504 struct mesh_path
*mppath
;
1506 sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1508 mppath
= mpp_path_lookup(mesh_hdr
->eaddr2
, sdata
);
1510 mpp_path_add(mesh_hdr
->eaddr2
, hdr
->addr4
, sdata
);
1512 spin_lock_bh(&mppath
->state_lock
);
1513 mppath
->exp_time
= jiffies
;
1514 if (compare_ether_addr(mppath
->mpp
, hdr
->addr4
) != 0)
1515 memcpy(mppath
->mpp
, hdr
->addr4
, ETH_ALEN
);
1516 spin_unlock_bh(&mppath
->state_lock
);
1521 if (compare_ether_addr(rx
->dev
->dev_addr
, hdr
->addr3
) == 0)
1526 if (rx
->flags
& IEEE80211_RX_RA_MATCH
) {
1528 IEEE80211_IFSTA_MESH_CTR_INC(&rx
->sdata
->u
.mesh
,
1529 dropped_frames_ttl
);
1531 struct ieee80211_hdr
*fwd_hdr
;
1532 fwd_skb
= skb_copy(skb
, GFP_ATOMIC
);
1534 if (!fwd_skb
&& net_ratelimit())
1535 printk(KERN_DEBUG
"%s: failed to clone mesh frame\n",
1538 fwd_hdr
= (struct ieee80211_hdr
*) fwd_skb
->data
;
1540 * Save TA to addr1 to send TA a path error if a
1541 * suitable next hop is not found
1543 memcpy(fwd_hdr
->addr1
, fwd_hdr
->addr2
, ETH_ALEN
);
1544 memcpy(fwd_hdr
->addr2
, rx
->dev
->dev_addr
, ETH_ALEN
);
1545 fwd_skb
->dev
= rx
->local
->mdev
;
1546 fwd_skb
->iif
= rx
->dev
->ifindex
;
1547 dev_queue_xmit(fwd_skb
);
1551 if (is_multicast_ether_addr(hdr
->addr3
) ||
1552 rx
->dev
->flags
& IFF_PROMISC
)
1555 return RX_DROP_MONITOR
;
1559 static ieee80211_rx_result debug_noinline
1560 ieee80211_rx_h_data(struct ieee80211_rx_data
*rx
)
1562 struct net_device
*dev
= rx
->dev
;
1563 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)rx
->skb
->data
;
1564 __le16 fc
= hdr
->frame_control
;
1567 if (unlikely(!ieee80211_is_data(hdr
->frame_control
)))
1570 if (unlikely(!ieee80211_is_data_present(hdr
->frame_control
)))
1571 return RX_DROP_MONITOR
;
1573 err
= __ieee80211_data_to_8023(rx
);
1575 return RX_DROP_UNUSABLE
;
1577 if (!ieee80211_frame_allowed(rx
, fc
))
1578 return RX_DROP_MONITOR
;
1582 dev
->stats
.rx_packets
++;
1583 dev
->stats
.rx_bytes
+= rx
->skb
->len
;
1585 ieee80211_deliver_skb(rx
);
1590 static ieee80211_rx_result debug_noinline
1591 ieee80211_rx_h_ctrl(struct ieee80211_rx_data
*rx
)
1593 struct ieee80211_local
*local
= rx
->local
;
1594 struct ieee80211_hw
*hw
= &local
->hw
;
1595 struct sk_buff
*skb
= rx
->skb
;
1596 struct ieee80211_bar
*bar
= (struct ieee80211_bar
*)skb
->data
;
1597 struct tid_ampdu_rx
*tid_agg_rx
;
1601 if (likely(!ieee80211_is_ctl(bar
->frame_control
)))
1604 if (ieee80211_is_back_req(bar
->frame_control
)) {
1607 tid
= le16_to_cpu(bar
->control
) >> 12;
1608 if (rx
->sta
->ampdu_mlme
.tid_state_rx
[tid
]
1609 != HT_AGG_STATE_OPERATIONAL
)
1611 tid_agg_rx
= rx
->sta
->ampdu_mlme
.tid_rx
[tid
];
1613 start_seq_num
= le16_to_cpu(bar
->start_seq_num
) >> 4;
1615 /* reset session timer */
1616 if (tid_agg_rx
->timeout
)
1617 mod_timer(&tid_agg_rx
->session_timer
,
1618 TU_TO_EXP_TIME(tid_agg_rx
->timeout
));
1620 /* manage reordering buffer according to requested */
1621 /* sequence number */
1623 ieee80211_sta_manage_reorder_buf(hw
, tid_agg_rx
, NULL
, NULL
,
1626 return RX_DROP_UNUSABLE
;
1632 static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data
*sdata
,
1633 struct ieee80211_mgmt
*mgmt
,
1636 struct ieee80211_local
*local
= sdata
->local
;
1637 struct sk_buff
*skb
;
1638 struct ieee80211_mgmt
*resp
;
1640 if (compare_ether_addr(mgmt
->da
, sdata
->dev
->dev_addr
) != 0) {
1641 /* Not to own unicast address */
1645 if (compare_ether_addr(mgmt
->sa
, sdata
->u
.mgd
.bssid
) != 0 ||
1646 compare_ether_addr(mgmt
->bssid
, sdata
->u
.mgd
.bssid
) != 0) {
1647 /* Not from the current AP. */
1651 if (sdata
->u
.mgd
.state
== IEEE80211_STA_MLME_ASSOCIATE
) {
1652 /* Association in progress; ignore SA Query */
1656 if (len
< 24 + 1 + sizeof(resp
->u
.action
.u
.sa_query
)) {
1657 /* Too short SA Query request frame */
1661 skb
= dev_alloc_skb(sizeof(*resp
) + local
->hw
.extra_tx_headroom
);
1665 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
1666 resp
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
1667 memset(resp
, 0, 24);
1668 memcpy(resp
->da
, mgmt
->sa
, ETH_ALEN
);
1669 memcpy(resp
->sa
, sdata
->dev
->dev_addr
, ETH_ALEN
);
1670 memcpy(resp
->bssid
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
1671 resp
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
1672 IEEE80211_STYPE_ACTION
);
1673 skb_put(skb
, 1 + sizeof(resp
->u
.action
.u
.sa_query
));
1674 resp
->u
.action
.category
= WLAN_CATEGORY_SA_QUERY
;
1675 resp
->u
.action
.u
.sa_query
.action
= WLAN_ACTION_SA_QUERY_RESPONSE
;
1676 memcpy(resp
->u
.action
.u
.sa_query
.trans_id
,
1677 mgmt
->u
.action
.u
.sa_query
.trans_id
,
1678 WLAN_SA_QUERY_TR_ID_LEN
);
1680 ieee80211_tx_skb(sdata
, skb
, 1);
1683 static ieee80211_rx_result debug_noinline
1684 ieee80211_rx_h_action(struct ieee80211_rx_data
*rx
)
1686 struct ieee80211_local
*local
= rx
->local
;
1687 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1688 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*) rx
->skb
->data
;
1689 struct ieee80211_bss
*bss
;
1690 int len
= rx
->skb
->len
;
1692 if (!ieee80211_is_action(mgmt
->frame_control
))
1696 return RX_DROP_MONITOR
;
1698 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
1699 return RX_DROP_MONITOR
;
1701 if (ieee80211_drop_unencrypted(rx
, mgmt
->frame_control
))
1702 return RX_DROP_MONITOR
;
1704 /* all categories we currently handle have action_code */
1705 if (len
< IEEE80211_MIN_ACTION_SIZE
+ 1)
1706 return RX_DROP_MONITOR
;
1708 switch (mgmt
->u
.action
.category
) {
1709 case WLAN_CATEGORY_BACK
:
1711 * The aggregation code is not prepared to handle
1712 * anything but STA/AP due to the BSSID handling;
1713 * IBSS could work in the code but isn't supported
1714 * by drivers or the standard.
1716 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
&&
1717 sdata
->vif
.type
!= NL80211_IFTYPE_AP_VLAN
&&
1718 sdata
->vif
.type
!= NL80211_IFTYPE_AP
)
1719 return RX_DROP_MONITOR
;
1721 switch (mgmt
->u
.action
.u
.addba_req
.action_code
) {
1722 case WLAN_ACTION_ADDBA_REQ
:
1723 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1724 sizeof(mgmt
->u
.action
.u
.addba_req
)))
1725 return RX_DROP_MONITOR
;
1726 ieee80211_process_addba_request(local
, rx
->sta
, mgmt
, len
);
1728 case WLAN_ACTION_ADDBA_RESP
:
1729 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1730 sizeof(mgmt
->u
.action
.u
.addba_resp
)))
1731 return RX_DROP_MONITOR
;
1732 ieee80211_process_addba_resp(local
, rx
->sta
, mgmt
, len
);
1734 case WLAN_ACTION_DELBA
:
1735 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1736 sizeof(mgmt
->u
.action
.u
.delba
)))
1737 return RX_DROP_MONITOR
;
1738 ieee80211_process_delba(sdata
, rx
->sta
, mgmt
, len
);
1742 case WLAN_CATEGORY_SPECTRUM_MGMT
:
1743 if (local
->hw
.conf
.channel
->band
!= IEEE80211_BAND_5GHZ
)
1744 return RX_DROP_MONITOR
;
1746 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1747 return RX_DROP_MONITOR
;
1749 switch (mgmt
->u
.action
.u
.measurement
.action_code
) {
1750 case WLAN_ACTION_SPCT_MSR_REQ
:
1751 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1752 sizeof(mgmt
->u
.action
.u
.measurement
)))
1753 return RX_DROP_MONITOR
;
1754 ieee80211_process_measurement_req(sdata
, mgmt
, len
);
1756 case WLAN_ACTION_SPCT_CHL_SWITCH
:
1757 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1758 sizeof(mgmt
->u
.action
.u
.chan_switch
)))
1759 return RX_DROP_MONITOR
;
1761 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1762 return RX_DROP_MONITOR
;
1764 if (memcmp(mgmt
->bssid
, sdata
->u
.mgd
.bssid
, ETH_ALEN
))
1765 return RX_DROP_MONITOR
;
1767 bss
= ieee80211_rx_bss_get(local
, sdata
->u
.mgd
.bssid
,
1768 local
->hw
.conf
.channel
->center_freq
,
1770 sdata
->u
.mgd
.ssid_len
);
1772 return RX_DROP_MONITOR
;
1774 ieee80211_sta_process_chanswitch(sdata
,
1775 &mgmt
->u
.action
.u
.chan_switch
.sw_elem
, bss
);
1776 ieee80211_rx_bss_put(local
, bss
);
1780 case WLAN_CATEGORY_SA_QUERY
:
1781 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1782 sizeof(mgmt
->u
.action
.u
.sa_query
)))
1783 return RX_DROP_MONITOR
;
1784 switch (mgmt
->u
.action
.u
.sa_query
.action
) {
1785 case WLAN_ACTION_SA_QUERY_REQUEST
:
1786 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1787 return RX_DROP_MONITOR
;
1788 ieee80211_process_sa_query_req(sdata
, mgmt
, len
);
1790 case WLAN_ACTION_SA_QUERY_RESPONSE
:
1792 * SA Query response is currently only used in AP mode
1793 * and it is processed in user space.
1802 rx
->sta
->rx_packets
++;
1803 dev_kfree_skb(rx
->skb
);
1807 static ieee80211_rx_result debug_noinline
1808 ieee80211_rx_h_mgmt(struct ieee80211_rx_data
*rx
)
1810 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(rx
->dev
);
1811 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*) rx
->skb
->data
;
1813 if (!(rx
->flags
& IEEE80211_RX_RA_MATCH
))
1814 return RX_DROP_MONITOR
;
1816 if (ieee80211_drop_unencrypted(rx
, mgmt
->frame_control
))
1817 return RX_DROP_MONITOR
;
1819 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1820 return ieee80211_mesh_rx_mgmt(sdata
, rx
->skb
, rx
->status
);
1822 if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
1823 return ieee80211_ibss_rx_mgmt(sdata
, rx
->skb
, rx
->status
);
1825 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
1826 return ieee80211_sta_rx_mgmt(sdata
, rx
->skb
, rx
->status
);
1828 return RX_DROP_MONITOR
;
1831 static void ieee80211_rx_michael_mic_report(struct net_device
*dev
,
1832 struct ieee80211_hdr
*hdr
,
1833 struct ieee80211_rx_data
*rx
)
1836 unsigned int hdrlen
;
1838 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1839 if (rx
->skb
->len
>= hdrlen
+ 4)
1840 keyidx
= rx
->skb
->data
[hdrlen
+ 3] >> 6;
1846 * Some hardware seem to generate incorrect Michael MIC
1847 * reports; ignore them to avoid triggering countermeasures.
1852 if (!ieee80211_has_protected(hdr
->frame_control
))
1855 if (rx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
&& keyidx
) {
1857 * APs with pairwise keys should never receive Michael MIC
1858 * errors for non-zero keyidx because these are reserved for
1859 * group keys and only the AP is sending real multicast
1860 * frames in the BSS.
1865 if (!ieee80211_is_data(hdr
->frame_control
) &&
1866 !ieee80211_is_auth(hdr
->frame_control
))
1869 mac80211_ev_michael_mic_failure(rx
->sdata
, keyidx
, hdr
, NULL
);
1871 dev_kfree_skb(rx
->skb
);
1875 /* TODO: use IEEE80211_RX_FRAGMENTED */
1876 static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data
*rx
)
1878 struct ieee80211_sub_if_data
*sdata
;
1879 struct ieee80211_local
*local
= rx
->local
;
1880 struct ieee80211_rtap_hdr
{
1881 struct ieee80211_radiotap_header hdr
;
1886 } __attribute__ ((packed
)) *rthdr
;
1887 struct sk_buff
*skb
= rx
->skb
, *skb2
;
1888 struct net_device
*prev_dev
= NULL
;
1889 struct ieee80211_rx_status
*status
= rx
->status
;
1891 if (rx
->flags
& IEEE80211_RX_CMNTR_REPORTED
)
1894 if (skb_headroom(skb
) < sizeof(*rthdr
) &&
1895 pskb_expand_head(skb
, sizeof(*rthdr
), 0, GFP_ATOMIC
))
1898 rthdr
= (void *)skb_push(skb
, sizeof(*rthdr
));
1899 memset(rthdr
, 0, sizeof(*rthdr
));
1900 rthdr
->hdr
.it_len
= cpu_to_le16(sizeof(*rthdr
));
1901 rthdr
->hdr
.it_present
=
1902 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS
) |
1903 (1 << IEEE80211_RADIOTAP_RATE
) |
1904 (1 << IEEE80211_RADIOTAP_CHANNEL
));
1906 rthdr
->rate
= rx
->rate
->bitrate
/ 5;
1907 rthdr
->chan_freq
= cpu_to_le16(status
->freq
);
1909 if (status
->band
== IEEE80211_BAND_5GHZ
)
1910 rthdr
->chan_flags
= cpu_to_le16(IEEE80211_CHAN_OFDM
|
1911 IEEE80211_CHAN_5GHZ
);
1913 rthdr
->chan_flags
= cpu_to_le16(IEEE80211_CHAN_DYN
|
1914 IEEE80211_CHAN_2GHZ
);
1916 skb_set_mac_header(skb
, 0);
1917 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1918 skb
->pkt_type
= PACKET_OTHERHOST
;
1919 skb
->protocol
= htons(ETH_P_802_2
);
1921 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
1922 if (!netif_running(sdata
->dev
))
1925 if (sdata
->vif
.type
!= NL80211_IFTYPE_MONITOR
||
1926 !(sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
))
1930 skb2
= skb_clone(skb
, GFP_ATOMIC
);
1932 skb2
->dev
= prev_dev
;
1937 prev_dev
= sdata
->dev
;
1938 sdata
->dev
->stats
.rx_packets
++;
1939 sdata
->dev
->stats
.rx_bytes
+= skb
->len
;
1943 skb
->dev
= prev_dev
;
1949 rx
->flags
|= IEEE80211_RX_CMNTR_REPORTED
;
1957 static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data
*sdata
,
1958 struct ieee80211_rx_data
*rx
,
1959 struct sk_buff
*skb
)
1961 ieee80211_rx_result res
= RX_DROP_MONITOR
;
1965 rx
->dev
= sdata
->dev
;
1967 #define CALL_RXH(rxh) \
1970 if (res != RX_CONTINUE) \
1974 CALL_RXH(ieee80211_rx_h_passive_scan
)
1975 CALL_RXH(ieee80211_rx_h_check
)
1976 CALL_RXH(ieee80211_rx_h_decrypt
)
1977 CALL_RXH(ieee80211_rx_h_check_more_data
)
1978 CALL_RXH(ieee80211_rx_h_sta_process
)
1979 CALL_RXH(ieee80211_rx_h_defragment
)
1980 CALL_RXH(ieee80211_rx_h_ps_poll
)
1981 CALL_RXH(ieee80211_rx_h_michael_mic_verify
)
1982 /* must be after MMIC verify so header is counted in MPDU mic */
1983 CALL_RXH(ieee80211_rx_h_remove_qos_control
)
1984 CALL_RXH(ieee80211_rx_h_amsdu
)
1985 #ifdef CONFIG_MAC80211_MESH
1986 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1987 CALL_RXH(ieee80211_rx_h_mesh_fwding
);
1989 CALL_RXH(ieee80211_rx_h_data
)
1990 CALL_RXH(ieee80211_rx_h_ctrl
)
1991 CALL_RXH(ieee80211_rx_h_action
)
1992 CALL_RXH(ieee80211_rx_h_mgmt
)
1998 case RX_DROP_MONITOR
:
1999 I802_DEBUG_INC(sdata
->local
->rx_handlers_drop
);
2001 rx
->sta
->rx_dropped
++;
2004 ieee80211_rx_cooked_monitor(rx
);
2006 case RX_DROP_UNUSABLE
:
2007 I802_DEBUG_INC(sdata
->local
->rx_handlers_drop
);
2009 rx
->sta
->rx_dropped
++;
2010 dev_kfree_skb(rx
->skb
);
2013 I802_DEBUG_INC(sdata
->local
->rx_handlers_queued
);
2018 /* main receive path */
2020 static int prepare_for_handlers(struct ieee80211_sub_if_data
*sdata
,
2021 struct ieee80211_rx_data
*rx
,
2022 struct ieee80211_hdr
*hdr
)
2024 u8
*bssid
= ieee80211_get_bssid(hdr
, rx
->skb
->len
, sdata
->vif
.type
);
2025 int multicast
= is_multicast_ether_addr(hdr
->addr1
);
2027 switch (sdata
->vif
.type
) {
2028 case NL80211_IFTYPE_STATION
:
2031 if (!ieee80211_bssid_match(bssid
, sdata
->u
.mgd
.bssid
)) {
2032 if (!(rx
->flags
& IEEE80211_RX_IN_SCAN
))
2034 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2035 } else if (!multicast
&&
2036 compare_ether_addr(sdata
->dev
->dev_addr
,
2038 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2040 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2043 case NL80211_IFTYPE_ADHOC
:
2046 if (ieee80211_is_beacon(hdr
->frame_control
)) {
2049 else if (!ieee80211_bssid_match(bssid
, sdata
->u
.ibss
.bssid
)) {
2050 if (!(rx
->flags
& IEEE80211_RX_IN_SCAN
))
2052 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2053 } else if (!multicast
&&
2054 compare_ether_addr(sdata
->dev
->dev_addr
,
2056 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2058 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2059 } else if (!rx
->sta
) {
2061 if (rx
->status
->flag
& RX_FLAG_HT
)
2062 rate_idx
= 0; /* TODO: HT rates */
2064 rate_idx
= rx
->status
->rate_idx
;
2065 rx
->sta
= ieee80211_ibss_add_sta(sdata
, bssid
, hdr
->addr2
,
2069 case NL80211_IFTYPE_MESH_POINT
:
2071 compare_ether_addr(sdata
->dev
->dev_addr
,
2073 if (!(sdata
->dev
->flags
& IFF_PROMISC
))
2076 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2079 case NL80211_IFTYPE_AP_VLAN
:
2080 case NL80211_IFTYPE_AP
:
2082 if (compare_ether_addr(sdata
->dev
->dev_addr
,
2085 } else if (!ieee80211_bssid_match(bssid
,
2086 sdata
->dev
->dev_addr
)) {
2087 if (!(rx
->flags
& IEEE80211_RX_IN_SCAN
))
2089 rx
->flags
&= ~IEEE80211_RX_RA_MATCH
;
2092 case NL80211_IFTYPE_WDS
:
2093 if (bssid
|| !ieee80211_is_data(hdr
->frame_control
))
2095 if (compare_ether_addr(sdata
->u
.wds
.remote_addr
, hdr
->addr2
))
2098 case NL80211_IFTYPE_MONITOR
:
2099 /* take everything */
2101 case NL80211_IFTYPE_UNSPECIFIED
:
2102 case __NL80211_IFTYPE_AFTER_LAST
:
2103 /* should never get here */
2112 * This is the actual Rx frames handler. as it blongs to Rx path it must
2113 * be called with rcu_read_lock protection.
2115 static void __ieee80211_rx_handle_packet(struct ieee80211_hw
*hw
,
2116 struct sk_buff
*skb
,
2117 struct ieee80211_rx_status
*status
,
2118 struct ieee80211_rate
*rate
)
2120 struct ieee80211_local
*local
= hw_to_local(hw
);
2121 struct ieee80211_sub_if_data
*sdata
;
2122 struct ieee80211_hdr
*hdr
;
2123 struct ieee80211_rx_data rx
;
2125 struct ieee80211_sub_if_data
*prev
= NULL
;
2126 struct sk_buff
*skb_new
;
2128 hdr
= (struct ieee80211_hdr
*)skb
->data
;
2129 memset(&rx
, 0, sizeof(rx
));
2136 if (ieee80211_is_data(hdr
->frame_control
) || ieee80211_is_mgmt(hdr
->frame_control
))
2137 local
->dot11ReceivedFragmentCount
++;
2139 rx
.sta
= sta_info_get(local
, hdr
->addr2
);
2141 rx
.sdata
= rx
.sta
->sdata
;
2142 rx
.dev
= rx
.sta
->sdata
->dev
;
2145 if ((status
->flag
& RX_FLAG_MMIC_ERROR
)) {
2146 ieee80211_rx_michael_mic_report(local
->mdev
, hdr
, &rx
);
2150 if (unlikely(local
->sw_scanning
|| local
->hw_scanning
))
2151 rx
.flags
|= IEEE80211_RX_IN_SCAN
;
2153 ieee80211_parse_qos(&rx
);
2154 ieee80211_verify_alignment(&rx
);
2158 if (rx
.sdata
&& ieee80211_is_data(hdr
->frame_control
)) {
2159 rx
.flags
|= IEEE80211_RX_RA_MATCH
;
2160 prepares
= prepare_for_handlers(rx
.sdata
, &rx
, hdr
);
2163 } else list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
2164 if (!netif_running(sdata
->dev
))
2167 if (sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
||
2168 sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)
2171 rx
.flags
|= IEEE80211_RX_RA_MATCH
;
2172 prepares
= prepare_for_handlers(sdata
, &rx
, hdr
);
2178 * frame is destined for this interface, but if it's not
2179 * also for the previous one we handle that after the
2180 * loop to avoid copying the SKB once too much
2189 * frame was destined for the previous interface
2190 * so invoke RX handlers for it
2193 skb_new
= skb_copy(skb
, GFP_ATOMIC
);
2195 if (net_ratelimit())
2196 printk(KERN_DEBUG
"%s: failed to copy "
2197 "multicast frame for %s\n",
2198 wiphy_name(local
->hw
.wiphy
),
2202 ieee80211_invoke_rx_handlers(prev
, &rx
, skb_new
);
2206 ieee80211_invoke_rx_handlers(prev
, &rx
, skb
);
2211 #define SEQ_MODULO 0x1000
2212 #define SEQ_MASK 0xfff
2214 static inline int seq_less(u16 sq1
, u16 sq2
)
2216 return ((sq1
- sq2
) & SEQ_MASK
) > (SEQ_MODULO
>> 1);
2219 static inline u16
seq_inc(u16 sq
)
2221 return (sq
+ 1) & SEQ_MASK
;
2224 static inline u16
seq_sub(u16 sq1
, u16 sq2
)
2226 return (sq1
- sq2
) & SEQ_MASK
;
2230 static void ieee80211_release_reorder_frame(struct ieee80211_hw
*hw
,
2231 struct tid_ampdu_rx
*tid_agg_rx
,
2234 struct ieee80211_supported_band
*sband
;
2235 struct ieee80211_rate
*rate
;
2236 struct ieee80211_rx_status status
;
2238 if (!tid_agg_rx
->reorder_buf
[index
])
2241 /* release the reordered frames to stack */
2242 memcpy(&status
, tid_agg_rx
->reorder_buf
[index
]->cb
, sizeof(status
));
2243 sband
= hw
->wiphy
->bands
[status
.band
];
2244 if (status
.flag
& RX_FLAG_HT
)
2245 rate
= sband
->bitrates
; /* TODO: HT rates */
2247 rate
= &sband
->bitrates
[status
.rate_idx
];
2248 __ieee80211_rx_handle_packet(hw
, tid_agg_rx
->reorder_buf
[index
],
2250 tid_agg_rx
->stored_mpdu_num
--;
2251 tid_agg_rx
->reorder_buf
[index
] = NULL
;
2254 tid_agg_rx
->head_seq_num
= seq_inc(tid_agg_rx
->head_seq_num
);
2259 * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
2260 * the skb was added to the buffer longer than this time ago, the earlier
2261 * frames that have not yet been received are assumed to be lost and the skb
2262 * can be released for processing. This may also release other skb's from the
2263 * reorder buffer if there are no additional gaps between the frames.
2265 #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
2268 * As it function blongs to Rx path it must be called with
2269 * the proper rcu_read_lock protection for its flow.
2271 static u8
ieee80211_sta_manage_reorder_buf(struct ieee80211_hw
*hw
,
2272 struct tid_ampdu_rx
*tid_agg_rx
,
2273 struct sk_buff
*skb
,
2274 struct ieee80211_rx_status
*rxstatus
,
2278 u16 head_seq_num
, buf_size
;
2281 buf_size
= tid_agg_rx
->buf_size
;
2282 head_seq_num
= tid_agg_rx
->head_seq_num
;
2284 /* frame with out of date sequence number */
2285 if (seq_less(mpdu_seq_num
, head_seq_num
)) {
2290 /* if frame sequence number exceeds our buffering window size or
2291 * block Ack Request arrived - release stored frames */
2292 if ((!seq_less(mpdu_seq_num
, head_seq_num
+ buf_size
)) || (bar_req
)) {
2293 /* new head to the ordering buffer */
2295 head_seq_num
= mpdu_seq_num
;
2298 seq_inc(seq_sub(mpdu_seq_num
, buf_size
));
2299 /* release stored frames up to new head to stack */
2300 while (seq_less(tid_agg_rx
->head_seq_num
, head_seq_num
)) {
2301 index
= seq_sub(tid_agg_rx
->head_seq_num
,
2303 % tid_agg_rx
->buf_size
;
2304 ieee80211_release_reorder_frame(hw
, tid_agg_rx
,
2311 /* now the new frame is always in the range of the reordering */
2313 index
= seq_sub(mpdu_seq_num
, tid_agg_rx
->ssn
)
2314 % tid_agg_rx
->buf_size
;
2315 /* check if we already stored this frame */
2316 if (tid_agg_rx
->reorder_buf
[index
]) {
2321 /* if arrived mpdu is in the right order and nothing else stored */
2322 /* release it immediately */
2323 if (mpdu_seq_num
== tid_agg_rx
->head_seq_num
&&
2324 tid_agg_rx
->stored_mpdu_num
== 0) {
2325 tid_agg_rx
->head_seq_num
=
2326 seq_inc(tid_agg_rx
->head_seq_num
);
2330 /* put the frame in the reordering buffer */
2331 tid_agg_rx
->reorder_buf
[index
] = skb
;
2332 tid_agg_rx
->reorder_time
[index
] = jiffies
;
2333 memcpy(tid_agg_rx
->reorder_buf
[index
]->cb
, rxstatus
,
2335 tid_agg_rx
->stored_mpdu_num
++;
2336 /* release the buffer until next missing frame */
2337 index
= seq_sub(tid_agg_rx
->head_seq_num
, tid_agg_rx
->ssn
)
2338 % tid_agg_rx
->buf_size
;
2339 if (!tid_agg_rx
->reorder_buf
[index
] &&
2340 tid_agg_rx
->stored_mpdu_num
> 1) {
2342 * No buffers ready to be released, but check whether any
2343 * frames in the reorder buffer have timed out.
2347 for (j
= (index
+ 1) % tid_agg_rx
->buf_size
; j
!= index
;
2348 j
= (j
+ 1) % tid_agg_rx
->buf_size
) {
2349 if (tid_agg_rx
->reorder_buf
[j
] == NULL
) {
2353 if (!time_after(jiffies
, tid_agg_rx
->reorder_time
[j
] +
2357 #ifdef CONFIG_MAC80211_HT_DEBUG
2358 if (net_ratelimit())
2359 printk(KERN_DEBUG
"%s: release an RX reorder "
2360 "frame due to timeout on earlier "
2362 wiphy_name(hw
->wiphy
));
2364 ieee80211_release_reorder_frame(hw
, tid_agg_rx
, j
);
2367 * Increment the head seq# also for the skipped slots.
2369 tid_agg_rx
->head_seq_num
=
2370 (tid_agg_rx
->head_seq_num
+ skipped
) &
2374 } else while (tid_agg_rx
->reorder_buf
[index
]) {
2375 ieee80211_release_reorder_frame(hw
, tid_agg_rx
, index
);
2376 index
= seq_sub(tid_agg_rx
->head_seq_num
,
2377 tid_agg_rx
->ssn
) % tid_agg_rx
->buf_size
;
2382 static u8
ieee80211_rx_reorder_ampdu(struct ieee80211_local
*local
,
2383 struct sk_buff
*skb
,
2384 struct ieee80211_rx_status
*status
)
2386 struct ieee80211_hw
*hw
= &local
->hw
;
2387 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
2388 struct sta_info
*sta
;
2389 struct tid_ampdu_rx
*tid_agg_rx
;
2395 sta
= sta_info_get(local
, hdr
->addr2
);
2399 /* filter the QoS data rx stream according to
2400 * STA/TID and check if this STA/TID is on aggregation */
2401 if (!ieee80211_is_data_qos(hdr
->frame_control
))
2404 tid
= *ieee80211_get_qos_ctl(hdr
) & IEEE80211_QOS_CTL_TID_MASK
;
2406 if (sta
->ampdu_mlme
.tid_state_rx
[tid
] != HT_AGG_STATE_OPERATIONAL
)
2409 tid_agg_rx
= sta
->ampdu_mlme
.tid_rx
[tid
];
2411 /* qos null data frames are excluded */
2412 if (unlikely(hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_NULLFUNC
)))
2415 /* new un-ordered ampdu frame - process it */
2417 /* reset session timer */
2418 if (tid_agg_rx
->timeout
)
2419 mod_timer(&tid_agg_rx
->session_timer
,
2420 TU_TO_EXP_TIME(tid_agg_rx
->timeout
));
2422 /* if this mpdu is fragmented - terminate rx aggregation session */
2423 sc
= le16_to_cpu(hdr
->seq_ctrl
);
2424 if (sc
& IEEE80211_SCTL_FRAG
) {
2425 ieee80211_sta_stop_rx_ba_session(sta
->sdata
, sta
->sta
.addr
,
2426 tid
, 0, WLAN_REASON_QSTA_REQUIRE_SETUP
);
2431 /* according to mpdu sequence number deal with reordering buffer */
2432 mpdu_seq_num
= (sc
& IEEE80211_SCTL_SEQ
) >> 4;
2433 ret
= ieee80211_sta_manage_reorder_buf(hw
, tid_agg_rx
, skb
, status
,
2440 * This is the receive path handler. It is called by a low level driver when an
2441 * 802.11 MPDU is received from the hardware.
2443 void __ieee80211_rx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
2444 struct ieee80211_rx_status
*status
)
2446 struct ieee80211_local
*local
= hw_to_local(hw
);
2447 struct ieee80211_rate
*rate
= NULL
;
2448 struct ieee80211_supported_band
*sband
;
2450 if (status
->band
< 0 ||
2451 status
->band
>= IEEE80211_NUM_BANDS
) {
2456 sband
= local
->hw
.wiphy
->bands
[status
->band
];
2463 * If we're suspending, it is possible although not too likely
2464 * that we'd be receiving frames after having already partially
2465 * quiesced the stack. We can't process such frames then since
2466 * that might, for example, cause stations to be added or other
2467 * driver callbacks be invoked.
2469 if (unlikely(local
->quiescing
|| local
->suspended
)) {
2474 if (status
->flag
& RX_FLAG_HT
) {
2475 /* rate_idx is MCS index */
2476 if (WARN_ON(status
->rate_idx
< 0 ||
2477 status
->rate_idx
>= 76))
2479 /* HT rates are not in the table - use the highest legacy rate
2480 * for now since other parts of mac80211 may not yet be fully
2482 rate
= &sband
->bitrates
[sband
->n_bitrates
- 1];
2484 if (WARN_ON(status
->rate_idx
< 0 ||
2485 status
->rate_idx
>= sband
->n_bitrates
))
2487 rate
= &sband
->bitrates
[status
->rate_idx
];
2491 * key references and virtual interfaces are protected using RCU
2492 * and this requires that we are in a read-side RCU section during
2493 * receive processing
2498 * Frames with failed FCS/PLCP checksum are not returned,
2499 * all other frames are returned without radiotap header
2500 * if it was previously present.
2501 * Also, frames with less than 16 bytes are dropped.
2503 skb
= ieee80211_rx_monitor(local
, skb
, status
, rate
);
2510 * In theory, the block ack reordering should happen after duplicate
2511 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
2512 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
2513 * happen as a new RX handler between ieee80211_rx_h_check and
2514 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
2515 * the time being, the call can be here since RX reorder buf processing
2516 * will implicitly skip duplicates. We could, in theory at least,
2517 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
2518 * frames from other than operational channel), but that should not
2519 * happen in normal networks.
2521 if (!ieee80211_rx_reorder_ampdu(local
, skb
, status
))
2522 __ieee80211_rx_handle_packet(hw
, skb
, status
, rate
);
2526 EXPORT_SYMBOL(__ieee80211_rx
);
2528 /* This is a version of the rx handler that can be called from hard irq
2529 * context. Post the skb on the queue and schedule the tasklet */
2530 void ieee80211_rx_irqsafe(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
2531 struct ieee80211_rx_status
*status
)
2533 struct ieee80211_local
*local
= hw_to_local(hw
);
2535 BUILD_BUG_ON(sizeof(struct ieee80211_rx_status
) > sizeof(skb
->cb
));
2537 skb
->dev
= local
->mdev
;
2538 /* copy status into skb->cb for use by tasklet */
2539 memcpy(skb
->cb
, status
, sizeof(*status
));
2540 skb
->pkt_type
= IEEE80211_RX_MSG
;
2541 skb_queue_tail(&local
->skb_queue
, skb
);
2542 tasklet_schedule(&local
->tasklet
);
2544 EXPORT_SYMBOL(ieee80211_rx_irqsafe
);