Linux 4.3

[linux/fpc-iii.git] / kernel / locking / mutex.c

/*
 * kernel/locking/mutex.c
 *
 * Mutexes: blocking mutual exclusion locks
 *
 * Started by Ingo Molnar:
 *
 *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
 *
 * Many thanks to Arjan van de Ven, Thomas Gleixner, Steven Rostedt and
 * David Howells for suggestions and improvements.
 *
 *  - Adaptive spinning for mutexes by Peter Zijlstra. (Ported to mainline
 *    from the -rt tree, where it was originally implemented for rtmutexes
 *    by Steven Rostedt, based on work by Gregory Haskins, Peter Morreale
 *    and Sven Dietrich.
 *
 * Also see Documentation/locking/mutex-design.txt.
 */
#include <linux/mutex.h>
#include <linux/ww_mutex.h>
#include <linux/sched.h>
#include <linux/sched/rt.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/debug_locks.h>
#include <linux/osq_lock.h>

/*
 * In the DEBUG case we are using the "NULL fastpath" for mutexes,
 * which forces all calls into the slowpath:
 */
#ifdef CONFIG_DEBUG_MUTEXES
# include "mutex-debug.h"
# include <asm-generic/mutex-null.h>
/*
 * Must be 0 for the debug case so we do not do the unlock outside of the
 * wait_lock region. debug_mutex_unlock() will do the actual unlock in this
 * case.
 */
# undef __mutex_slowpath_needs_to_unlock
# define  __mutex_slowpath_needs_to_unlock()    0
#else
# include "mutex.h"
# include <asm/mutex.h>
#endif

void
__mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key)
{
        atomic_set(&lock->count, 1);
        spin_lock_init(&lock->wait_lock);
        INIT_LIST_HEAD(&lock->wait_list);
        mutex_clear_owner(lock);
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
        osq_lock_init(&lock->osq);
#endif

        debug_mutex_init(lock, name, key);
}

EXPORT_SYMBOL(__mutex_init);

#ifndef CONFIG_DEBUG_LOCK_ALLOC
/*
 * We split the mutex lock/unlock logic into separate fastpath and
 * slowpath functions, to reduce the register pressure on the fastpath.
 * We also put the fastpath first in the kernel image, to make sure the
 * branch is predicted by the CPU as default-untaken.
 */
__visible void __sched __mutex_lock_slowpath(atomic_t *lock_count);

/**
 * mutex_lock - acquire the mutex
 * @lock: the mutex to be acquired
 *
 * Lock the mutex exclusively for this task. If the mutex is not
 * available right now, it will sleep until it can get it.
 *
 * The mutex must later on be released by the same task that
 * acquired it. Recursive locking is not allowed. The task
 * may not exit without first unlocking the mutex. Also, kernel
 * memory where the mutex resides must not be freed with
 * the mutex still locked. The mutex must first be initialized
 * (or statically defined) before it can be locked. memset()-ing
 * the mutex to 0 is not allowed.
 *
 * ( The CONFIG_DEBUG_MUTEXES .config option turns on debugging
 *   checks that will enforce the restrictions and will also do
 *   deadlock debugging. )
 *
 * This function is similar to (but not equivalent to) down().
 */
void __sched mutex_lock(struct mutex *lock)
{
        might_sleep();
        /*
         * The locking fastpath is the 1->0 transition from
         * 'unlocked' into 'locked' state.
         */
        __mutex_fastpath_lock(&lock->count, __mutex_lock_slowpath);
        mutex_set_owner(lock);
}

EXPORT_SYMBOL(mutex_lock);
#endif

static __always_inline void ww_mutex_lock_acquired(struct ww_mutex *ww,
                                                   struct ww_acquire_ctx *ww_ctx)
{
#ifdef CONFIG_DEBUG_MUTEXES
        /*
         * If this WARN_ON triggers, you used ww_mutex_lock to acquire,
         * but released with a normal mutex_unlock in this call.
         *
         * This should never happen, always use ww_mutex_unlock.
         */
        DEBUG_LOCKS_WARN_ON(ww->ctx);

        /*
         * Not quite done after calling ww_acquire_done() ?
         */
        DEBUG_LOCKS_WARN_ON(ww_ctx->done_acquire);

        if (ww_ctx->contending_lock) {
                /*
                 * After -EDEADLK you tried to
                 * acquire a different ww_mutex? Bad!
                 */
                DEBUG_LOCKS_WARN_ON(ww_ctx->contending_lock != ww);

                /*
                 * You called ww_mutex_lock after receiving -EDEADLK,
                 * but 'forgot' to unlock everything else first?
                 */
                DEBUG_LOCKS_WARN_ON(ww_ctx->acquired > 0);
                ww_ctx->contending_lock = NULL;
        }

        /*
         * Naughty, using a different class will lead to undefined behavior!
         */
        DEBUG_LOCKS_WARN_ON(ww_ctx->ww_class != ww->ww_class);
#endif
        ww_ctx->acquired++;
}

/*
 * After acquiring lock with fastpath or when we lost out in contested
 * slowpath, set ctx and wake up any waiters so they can recheck.
 *
 * This function is never called when CONFIG_DEBUG_LOCK_ALLOC is set,
 * as the fastpath and opportunistic spinning are disabled in that case.
 */
static __always_inline void
ww_mutex_set_context_fastpath(struct ww_mutex *lock,
                               struct ww_acquire_ctx *ctx)
{
        unsigned long flags;
        struct mutex_waiter *cur;

        ww_mutex_lock_acquired(lock, ctx);

        lock->ctx = ctx;

        /*
         * The lock->ctx update should be visible on all cores before
         * the atomic read is done, otherwise contended waiters might be
         * missed. The contended waiters will either see ww_ctx == NULL
         * and keep spinning, or it will acquire wait_lock, add itself
         * to waiter list and sleep.
         */
        smp_mb(); /* ^^^ */

        /*
         * Check if lock is contended, if not there is nobody to wake up
         */
        if (likely(atomic_read(&lock->base.count) == 0))
                return;

        /*
         * Uh oh, we raced in fastpath, wake up everyone in this case,
         * so they can see the new lock->ctx.
         */
        spin_lock_mutex(&lock->base.wait_lock, flags);
        list_for_each_entry(cur, &lock->base.wait_list, list) {
                debug_mutex_wake_waiter(&lock->base, cur);
                wake_up_process(cur->task);
        }
        spin_unlock_mutex(&lock->base.wait_lock, flags);
}

/*
 * After acquiring lock in the slowpath set ctx and wake up any
 * waiters so they can recheck.
 *
 * Callers must hold the mutex wait_lock.
 */
static __always_inline void
ww_mutex_set_context_slowpath(struct ww_mutex *lock,
                              struct ww_acquire_ctx *ctx)
{
        struct mutex_waiter *cur;

        ww_mutex_lock_acquired(lock, ctx);
        lock->ctx = ctx;

        /*
         * Give any possible sleeping processes the chance to wake up,
         * so they can recheck if they have to back off.
         */
        list_for_each_entry(cur, &lock->base.wait_list, list) {
                debug_mutex_wake_waiter(&lock->base, cur);
                wake_up_process(cur->task);
        }
}

#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
/*
 * Look out! "owner" is an entirely speculative pointer
 * access and not reliable.
 */
static noinline
bool mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner)
{
        bool ret = true;

        rcu_read_lock();
        while (lock->owner == owner) {
                /*
                 * Ensure we emit the owner->on_cpu, dereference _after_
                 * checking lock->owner still matches owner. If that fails,
                 * owner might point to freed memory. If it still matches,
                 * the rcu_read_lock() ensures the memory stays valid.
                 */
                barrier();

                if (!owner->on_cpu || need_resched()) {
                        ret = false;
                        break;
                }

                cpu_relax_lowlatency();
        }
        rcu_read_unlock();

        return ret;
}

/*
 * Initial check for entering the mutex spinning loop
 */
static inline int mutex_can_spin_on_owner(struct mutex *lock)
{
        struct task_struct *owner;
        int retval = 1;

        if (need_resched())
                return 0;

        rcu_read_lock();
        owner = READ_ONCE(lock->owner);
        if (owner)
                retval = owner->on_cpu;
        rcu_read_unlock();
        /*
         * if lock->owner is not set, the mutex owner may have just acquired
         * it and not set the owner yet or the mutex has been released.
         */
        return retval;
}

/*
 * Atomically try to take the lock when it is available
 */
static inline bool mutex_try_to_acquire(struct mutex *lock)
{
        return !mutex_is_locked(lock) &&
                (atomic_cmpxchg(&lock->count, 1, 0) == 1);
}

/*
 * Optimistic spinning.
 *
 * We try to spin for acquisition when we find that the lock owner
 * is currently running on a (different) CPU and while we don't
 * need to reschedule. The rationale is that if the lock owner is
 * running, it is likely to release the lock soon.
 *
 * Since this needs the lock owner, and this mutex implementation
 * doesn't track the owner atomically in the lock field, we need to
 * track it non-atomically.
 *
 * We can't do this for DEBUG_MUTEXES because that relies on wait_lock
 * to serialize everything.
 *
 * The mutex spinners are queued up using MCS lock so that only one
 * spinner can compete for the mutex. However, if mutex spinning isn't
 * going to happen, there is no point in going through the lock/unlock
 * overhead.
 *
 * Returns true when the lock was taken, otherwise false, indicating
 * that we need to jump to the slowpath and sleep.
 */
static bool mutex_optimistic_spin(struct mutex *lock,
                                  struct ww_acquire_ctx *ww_ctx, const bool use_ww_ctx)
{
        struct task_struct *task = current;

        if (!mutex_can_spin_on_owner(lock))
                goto done;

        /*
         * In order to avoid a stampede of mutex spinners trying to
         * acquire the mutex all at once, the spinners need to take a
         * MCS (queued) lock first before spinning on the owner field.
         */
        if (!osq_lock(&lock->osq))
                goto done;

        while (true) {
                struct task_struct *owner;

                if (use_ww_ctx && ww_ctx->acquired > 0) {
                        struct ww_mutex *ww;

                        ww = container_of(lock, struct ww_mutex, base);
                        /*
                         * If ww->ctx is set the contents are undefined, only
                         * by acquiring wait_lock there is a guarantee that
                         * they are not invalid when reading.
                         *
                         * As such, when deadlock detection needs to be
                         * performed the optimistic spinning cannot be done.
                         */
                        if (READ_ONCE(ww->ctx))
                                break;
                }

                /*
                 * If there's an owner, wait for it to either
                 * release the lock or go to sleep.
                 */
                owner = READ_ONCE(lock->owner);
                if (owner && !mutex_spin_on_owner(lock, owner))
                        break;

                /* Try to acquire the mutex if it is unlocked. */
                if (mutex_try_to_acquire(lock)) {
                        lock_acquired(&lock->dep_map, ip);

                        if (use_ww_ctx) {
                                struct ww_mutex *ww;
                                ww = container_of(lock, struct ww_mutex, base);

                                ww_mutex_set_context_fastpath(ww, ww_ctx);
                        }

                        mutex_set_owner(lock);
                        osq_unlock(&lock->osq);
                        return true;
                }

                /*
                 * When there's no owner, we might have preempted between the
                 * owner acquiring the lock and setting the owner field. If
                 * we're an RT task that will live-lock because we won't let
                 * the owner complete.
                 */
                if (!owner && (need_resched() || rt_task(task)))
                        break;

                /*
                 * The cpu_relax() call is a compiler barrier which forces
                 * everything in this loop to be re-loaded. We don't need
                 * memory barriers as we'll eventually observe the right
                 * values at the cost of a few extra spins.
                 */
                cpu_relax_lowlatency();
        }

        osq_unlock(&lock->osq);
done:
        /*
         * If we fell out of the spin path because of need_resched(),
         * reschedule now, before we try-lock the mutex. This avoids getting
         * scheduled out right after we obtained the mutex.
         */
        if (need_resched()) {
                /*
                 * We _should_ have TASK_RUNNING here, but just in case
                 * we do not, make it so, otherwise we might get stuck.
                 */
                __set_current_state(TASK_RUNNING);
                schedule_preempt_disabled();
        }

        return false;
}
#else
static bool mutex_optimistic_spin(struct mutex *lock,
                                  struct ww_acquire_ctx *ww_ctx, const bool use_ww_ctx)
{
        return false;
}
#endif

__visible __used noinline
void __sched __mutex_unlock_slowpath(atomic_t *lock_count);

/**
 * mutex_unlock - release the mutex
 * @lock: the mutex to be released
 *
 * Unlock a mutex that has been locked by this task previously.
 *
 * This function must not be used in interrupt context. Unlocking
 * of a not locked mutex is not allowed.
 *
 * This function is similar to (but not equivalent to) up().
 */
void __sched mutex_unlock(struct mutex *lock)
{
        /*
         * The unlocking fastpath is the 0->1 transition from 'locked'
         * into 'unlocked' state:
         */
#ifndef CONFIG_DEBUG_MUTEXES
        /*
         * When debugging is enabled we must not clear the owner before time,
         * the slow path will always be taken, and that clears the owner field
         * after verifying that it was indeed current.
         */
        mutex_clear_owner(lock);
#endif
        __mutex_fastpath_unlock(&lock->count, __mutex_unlock_slowpath);
}

EXPORT_SYMBOL(mutex_unlock);

/**
 * ww_mutex_unlock - release the w/w mutex
 * @lock: the mutex to be released
 *
 * Unlock a mutex that has been locked by this task previously with any of the
 * ww_mutex_lock* functions (with or without an acquire context). It is
 * forbidden to release the locks after releasing the acquire context.
 *
 * This function must not be used in interrupt context. Unlocking
 * of a unlocked mutex is not allowed.
 */
void __sched ww_mutex_unlock(struct ww_mutex *lock)
{
        /*
         * The unlocking fastpath is the 0->1 transition from 'locked'
         * into 'unlocked' state:
         */
        if (lock->ctx) {
#ifdef CONFIG_DEBUG_MUTEXES
                DEBUG_LOCKS_WARN_ON(!lock->ctx->acquired);
#endif
                if (lock->ctx->acquired > 0)
                        lock->ctx->acquired--;
                lock->ctx = NULL;
        }

#ifndef CONFIG_DEBUG_MUTEXES
        /*
         * When debugging is enabled we must not clear the owner before time,
         * the slow path will always be taken, and that clears the owner field
         * after verifying that it was indeed current.
         */
        mutex_clear_owner(&lock->base);
#endif
        __mutex_fastpath_unlock(&lock->base.count, __mutex_unlock_slowpath);
}
EXPORT_SYMBOL(ww_mutex_unlock);

static inline int __sched
__ww_mutex_lock_check_stamp(struct mutex *lock, struct ww_acquire_ctx *ctx)
{
        struct ww_mutex *ww = container_of(lock, struct ww_mutex, base);
        struct ww_acquire_ctx *hold_ctx = READ_ONCE(ww->ctx);

        if (!hold_ctx)
                return 0;

        if (unlikely(ctx == hold_ctx))
                return -EALREADY;

        if (ctx->stamp - hold_ctx->stamp <= LONG_MAX &&
            (ctx->stamp != hold_ctx->stamp || ctx > hold_ctx)) {
#ifdef CONFIG_DEBUG_MUTEXES
                DEBUG_LOCKS_WARN_ON(ctx->contending_lock);
                ctx->contending_lock = ww;
#endif
                return -EDEADLK;
        }

        return 0;
}

/*
 * Lock a mutex (possibly interruptible), slowpath:
 */
static __always_inline int __sched
__mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
                    struct lockdep_map *nest_lock, unsigned long ip,
                    struct ww_acquire_ctx *ww_ctx, const bool use_ww_ctx)
{
        struct task_struct *task = current;
        struct mutex_waiter waiter;
        unsigned long flags;
        int ret;

        preempt_disable();
        mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);

        if (mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx)) {
                /* got the lock, yay! */
                preempt_enable();
                return 0;
        }

        spin_lock_mutex(&lock->wait_lock, flags);

        /*
         * Once more, try to acquire the lock. Only try-lock the mutex if
         * it is unlocked to reduce unnecessary xchg() operations.
         */
        if (!mutex_is_locked(lock) && (atomic_xchg(&lock->count, 0) == 1))
                goto skip_wait;

        debug_mutex_lock_common(lock, &waiter);
        debug_mutex_add_waiter(lock, &waiter, task_thread_info(task));

        /* add waiting tasks to the end of the waitqueue (FIFO): */
        list_add_tail(&waiter.list, &lock->wait_list);
        waiter.task = task;

        lock_contended(&lock->dep_map, ip);

        for (;;) {
                /*
                 * Lets try to take the lock again - this is needed even if
                 * we get here for the first time (shortly after failing to
                 * acquire the lock), to make sure that we get a wakeup once
                 * it's unlocked. Later on, if we sleep, this is the
                 * operation that gives us the lock. We xchg it to -1, so
                 * that when we release the lock, we properly wake up the
                 * other waiters. We only attempt the xchg if the count is
                 * non-negative in order to avoid unnecessary xchg operations:
                 */
                if (atomic_read(&lock->count) >= 0 &&
                    (atomic_xchg(&lock->count, -1) == 1))
                        break;

                /*
                 * got a signal? (This code gets eliminated in the
                 * TASK_UNINTERRUPTIBLE case.)
                 */
                if (unlikely(signal_pending_state(state, task))) {
                        ret = -EINTR;
                        goto err;
                }

                if (use_ww_ctx && ww_ctx->acquired > 0) {
                        ret = __ww_mutex_lock_check_stamp(lock, ww_ctx);
                        if (ret)
                                goto err;
                }

                __set_task_state(task, state);

                /* didn't get the lock, go to sleep: */
                spin_unlock_mutex(&lock->wait_lock, flags);
                schedule_preempt_disabled();
                spin_lock_mutex(&lock->wait_lock, flags);
        }
        __set_task_state(task, TASK_RUNNING);

        mutex_remove_waiter(lock, &waiter, current_thread_info());
        /* set it to 0 if there are no waiters left: */
        if (likely(list_empty(&lock->wait_list)))
                atomic_set(&lock->count, 0);
        debug_mutex_free_waiter(&waiter);

skip_wait:
        /* got the lock - cleanup and rejoice! */
        lock_acquired(&lock->dep_map, ip);
        mutex_set_owner(lock);

        if (use_ww_ctx) {
                struct ww_mutex *ww = container_of(lock, struct ww_mutex, base);
                ww_mutex_set_context_slowpath(ww, ww_ctx);
        }

        spin_unlock_mutex(&lock->wait_lock, flags);
        preempt_enable();
        return 0;

err:
        mutex_remove_waiter(lock, &waiter, task_thread_info(task));
        spin_unlock_mutex(&lock->wait_lock, flags);
        debug_mutex_free_waiter(&waiter);
        mutex_release(&lock->dep_map, 1, ip);
        preempt_enable();
        return ret;
}

#ifdef CONFIG_DEBUG_LOCK_ALLOC
void __sched
mutex_lock_nested(struct mutex *lock, unsigned int subclass)
{
        might_sleep();
        __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE,
                            subclass, NULL, _RET_IP_, NULL, 0);
}

EXPORT_SYMBOL_GPL(mutex_lock_nested);

void __sched
_mutex_lock_nest_lock(struct mutex *lock, struct lockdep_map *nest)
{
        might_sleep();
        __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE,
                            0, nest, _RET_IP_, NULL, 0);
}

EXPORT_SYMBOL_GPL(_mutex_lock_nest_lock);

int __sched
mutex_lock_killable_nested(struct mutex *lock, unsigned int subclass)
{
        might_sleep();
        return __mutex_lock_common(lock, TASK_KILLABLE,
                                   subclass, NULL, _RET_IP_, NULL, 0);
}
EXPORT_SYMBOL_GPL(mutex_lock_killable_nested);

int __sched
mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass)
{
        might_sleep();
        return __mutex_lock_common(lock, TASK_INTERRUPTIBLE,
                                   subclass, NULL, _RET_IP_, NULL, 0);
}

EXPORT_SYMBOL_GPL(mutex_lock_interruptible_nested);

static inline int
ww_mutex_deadlock_injection(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
#ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH
        unsigned tmp;

        if (ctx->deadlock_inject_countdown-- == 0) {
                tmp = ctx->deadlock_inject_interval;
                if (tmp > UINT_MAX/4)
                        tmp = UINT_MAX;
                else
                        tmp = tmp*2 + tmp + tmp/2;

                ctx->deadlock_inject_interval = tmp;
                ctx->deadlock_inject_countdown = tmp;
                ctx->contending_lock = lock;

                ww_mutex_unlock(lock);

                return -EDEADLK;
        }
#endif

        return 0;
}

int __sched
__ww_mutex_lock(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
        int ret;

        might_sleep();
        ret =  __mutex_lock_common(&lock->base, TASK_UNINTERRUPTIBLE,
                                   0, &ctx->dep_map, _RET_IP_, ctx, 1);
        if (!ret && ctx->acquired > 1)
                return ww_mutex_deadlock_injection(lock, ctx);

        return ret;
}
EXPORT_SYMBOL_GPL(__ww_mutex_lock);

int __sched
__ww_mutex_lock_interruptible(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
        int ret;

        might_sleep();
        ret = __mutex_lock_common(&lock->base, TASK_INTERRUPTIBLE,
                                  0, &ctx->dep_map, _RET_IP_, ctx, 1);

        if (!ret && ctx->acquired > 1)
                return ww_mutex_deadlock_injection(lock, ctx);

        return ret;
}
EXPORT_SYMBOL_GPL(__ww_mutex_lock_interruptible);

#endif

/*
 * Release the lock, slowpath:
 */
static inline void
__mutex_unlock_common_slowpath(struct mutex *lock, int nested)
{
        unsigned long flags;

        /*
         * As a performance measurement, release the lock before doing other
         * wakeup related duties to follow. This allows other tasks to acquire
         * the lock sooner, while still handling cleanups in past unlock calls.
         * This can be done as we do not enforce strict equivalence between the
         * mutex counter and wait_list.
         *
         *
         * Some architectures leave the lock unlocked in the fastpath failure
         * case, others need to leave it locked. In the later case we have to
         * unlock it here - as the lock counter is currently 0 or negative.
         */
        if (__mutex_slowpath_needs_to_unlock())
                atomic_set(&lock->count, 1);

        spin_lock_mutex(&lock->wait_lock, flags);
        mutex_release(&lock->dep_map, nested, _RET_IP_);
        debug_mutex_unlock(lock);

        if (!list_empty(&lock->wait_list)) {
                /* get the first entry from the wait-list: */
                struct mutex_waiter *waiter =
                                list_entry(lock->wait_list.next,
                                           struct mutex_waiter, list);

                debug_mutex_wake_waiter(lock, waiter);

                wake_up_process(waiter->task);
        }

        spin_unlock_mutex(&lock->wait_lock, flags);
}

/*
 * Release the lock, slowpath:
 */
__visible void
__mutex_unlock_slowpath(atomic_t *lock_count)
{
        struct mutex *lock = container_of(lock_count, struct mutex, count);

        __mutex_unlock_common_slowpath(lock, 1);
}

#ifndef CONFIG_DEBUG_LOCK_ALLOC
/*
 * Here come the less common (and hence less performance-critical) APIs:
 * mutex_lock_interruptible() and mutex_trylock().
 */
static noinline int __sched
__mutex_lock_killable_slowpath(struct mutex *lock);

static noinline int __sched
__mutex_lock_interruptible_slowpath(struct mutex *lock);

/**
 * mutex_lock_interruptible - acquire the mutex, interruptible
 * @lock: the mutex to be acquired
 *
 * Lock the mutex like mutex_lock(), and return 0 if the mutex has
 * been acquired or sleep until the mutex becomes available. If a
 * signal arrives while waiting for the lock then this function
 * returns -EINTR.
 *
 * This function is similar to (but not equivalent to) down_interruptible().
 */
int __sched mutex_lock_interruptible(struct mutex *lock)
{
        int ret;

        might_sleep();
        ret =  __mutex_fastpath_lock_retval(&lock->count);
        if (likely(!ret)) {
                mutex_set_owner(lock);
                return 0;
        } else
                return __mutex_lock_interruptible_slowpath(lock);
}

EXPORT_SYMBOL(mutex_lock_interruptible);

int __sched mutex_lock_killable(struct mutex *lock)
{
        int ret;

        might_sleep();
        ret = __mutex_fastpath_lock_retval(&lock->count);
        if (likely(!ret)) {
                mutex_set_owner(lock);
                return 0;
        } else
                return __mutex_lock_killable_slowpath(lock);
}
EXPORT_SYMBOL(mutex_lock_killable);

__visible void __sched
__mutex_lock_slowpath(atomic_t *lock_count)
{
        struct mutex *lock = container_of(lock_count, struct mutex, count);

        __mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, 0,
                            NULL, _RET_IP_, NULL, 0);
}

static noinline int __sched
__mutex_lock_killable_slowpath(struct mutex *lock)
{
        return __mutex_lock_common(lock, TASK_KILLABLE, 0,
                                   NULL, _RET_IP_, NULL, 0);
}

static noinline int __sched
__mutex_lock_interruptible_slowpath(struct mutex *lock)
{
        return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, 0,
                                   NULL, _RET_IP_, NULL, 0);
}

static noinline int __sched
__ww_mutex_lock_slowpath(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
        return __mutex_lock_common(&lock->base, TASK_UNINTERRUPTIBLE, 0,
                                   NULL, _RET_IP_, ctx, 1);
}

static noinline int __sched
__ww_mutex_lock_interruptible_slowpath(struct ww_mutex *lock,
                                            struct ww_acquire_ctx *ctx)
{
        return __mutex_lock_common(&lock->base, TASK_INTERRUPTIBLE, 0,
                                   NULL, _RET_IP_, ctx, 1);
}

#endif

/*
 * Spinlock based trylock, we take the spinlock and check whether we
 * can get the lock:
 */
static inline int __mutex_trylock_slowpath(atomic_t *lock_count)
{
        struct mutex *lock = container_of(lock_count, struct mutex, count);
        unsigned long flags;
        int prev;

        /* No need to trylock if the mutex is locked. */
        if (mutex_is_locked(lock))
                return 0;

        spin_lock_mutex(&lock->wait_lock, flags);

        prev = atomic_xchg(&lock->count, -1);
        if (likely(prev == 1)) {
                mutex_set_owner(lock);
                mutex_acquire(&lock->dep_map, 0, 1, _RET_IP_);
        }

        /* Set it back to 0 if there are no waiters: */
        if (likely(list_empty(&lock->wait_list)))
                atomic_set(&lock->count, 0);

        spin_unlock_mutex(&lock->wait_lock, flags);

        return prev == 1;
}

/**
 * mutex_trylock - try to acquire the mutex, without waiting
 * @lock: the mutex to be acquired
 *
 * Try to acquire the mutex atomically. Returns 1 if the mutex
 * has been acquired successfully, and 0 on contention.
 *
 * NOTE: this function follows the spin_trylock() convention, so
 * it is negated from the down_trylock() return values! Be careful
 * about this when converting semaphore users to mutexes.
 *
 * This function must not be used in interrupt context. The
 * mutex must be released by the same task that acquired it.
 */
int __sched mutex_trylock(struct mutex *lock)
{
        int ret;

        ret = __mutex_fastpath_trylock(&lock->count, __mutex_trylock_slowpath);
        if (ret)
                mutex_set_owner(lock);

        return ret;
}
EXPORT_SYMBOL(mutex_trylock);

#ifndef CONFIG_DEBUG_LOCK_ALLOC
int __sched
__ww_mutex_lock(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
        int ret;

        might_sleep();

        ret = __mutex_fastpath_lock_retval(&lock->base.count);

        if (likely(!ret)) {
                ww_mutex_set_context_fastpath(lock, ctx);
                mutex_set_owner(&lock->base);
        } else
                ret = __ww_mutex_lock_slowpath(lock, ctx);
        return ret;
}
EXPORT_SYMBOL(__ww_mutex_lock);

int __sched
__ww_mutex_lock_interruptible(struct ww_mutex *lock, struct ww_acquire_ctx *ctx)
{
        int ret;

        might_sleep();

        ret = __mutex_fastpath_lock_retval(&lock->base.count);

        if (likely(!ret)) {
                ww_mutex_set_context_fastpath(lock, ctx);
                mutex_set_owner(&lock->base);
        } else
                ret = __ww_mutex_lock_interruptible_slowpath(lock, ctx);
        return ret;
}
EXPORT_SYMBOL(__ww_mutex_lock_interruptible);

#endif

/**
 * atomic_dec_and_mutex_lock - return holding mutex if we dec to 0
 * @cnt: the atomic which we are to dec
 * @lock: the mutex to return holding if we dec to 0
 *
 * return true and hold lock if we dec to 0, return false otherwise
 */
int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock)
{
        /* dec if we can't possibly hit 0 */
        if (atomic_add_unless(cnt, -1, 1))
                return 0;
        /* we might hit 0, so take the lock */
        mutex_lock(lock);
        if (!atomic_dec_and_test(cnt)) {
                /* when we actually did the dec, we didn't hit 0 */
                mutex_unlock(lock);
                return 0;
        }
        /* we hit 0, and we hold the lock */
        return 1;
}
EXPORT_SYMBOL(atomic_dec_and_mutex_lock);