3 * (The TDA9875 is used on the Diamond DTV2000 french version
4 * Other cards probably use these chips as well.)
5 * This driver will not complain if used with any
6 * other i2c device with the same address.
8 * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and
10 * This code is placed under the terms of the GNU General Public License
11 * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
12 * Which was based on tda8425.c by Greg Alexander (c) 1998
15 * debug - set to 1 if you'd like to see debug messages
17 * Revision: 0.1 - original version
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/sched.h>
23 #include <linux/string.h>
24 #include <linux/timer.h>
25 #include <linux/delay.h>
26 #include <linux/errno.h>
27 #include <linux/slab.h>
28 #include <linux/videodev.h>
29 #include <media/v4l2-common.h>
30 #include <linux/i2c.h>
31 #include <linux/i2c-algo-bit.h>
32 #include <linux/init.h>
35 #include <media/i2c-addr.h>
37 static int debug
; /* insmod parameter */
38 module_param(debug
, int, S_IRUGO
| S_IWUSR
);
39 MODULE_LICENSE("GPL");
41 /* Addresses to scan */
42 static unsigned short normal_i2c
[] = {
43 I2C_ADDR_TDA9875
>> 1,
48 /* This is a superset of the TDA9875 */
55 static struct i2c_driver driver
;
56 static struct i2c_client client_template
;
58 #define dprintk if (debug) printk
60 /* The TDA9875 is made by Philips Semiconductor
61 * http://www.semiconductors.philips.com
62 * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator
66 /* subaddresses for TDA9875 */
67 #define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/
68 #define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */
69 #define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/
70 #define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/
72 #define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/
73 #define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/
74 #define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/
75 #define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/
77 #define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/
78 #define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/
79 #define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/
80 #define TDA9875_MVL 0x1a /* Main volume gauche */
81 #define TDA9875_MVR 0x1b /* Main volume droite */
82 #define TDA9875_MBA 0x1d /* Main Basse */
83 #define TDA9875_MTR 0x1e /* Main treble */
84 #define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/
85 #define TDA9875_AVL 0x20 /* Auxilary volume gauche */
86 #define TDA9875_AVR 0x21 /* Auxilary volume droite */
87 #define TDA9875_ABA 0x22 /* Auxilary Basse */
88 #define TDA9875_ATR 0x23 /* Auxilary treble */
90 #define TDA9875_MSR 0x02 /* Monitor select register */
91 #define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */
92 #define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */
93 #define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */
94 #define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */
95 #define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */
96 #define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */
97 #define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/
98 #define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/
99 #define TDA9875_FMAT 0x0b /* FM Matrix regirter*/
102 #define TDA9875_MUTE_ON 0xff /* general mute */
103 #define TDA9875_MUTE_OFF 0xcc /* general no mute */
109 static int tda9875_write(struct i2c_client
*client
, int subaddr
, unsigned char val
)
111 unsigned char buffer
[2];
112 dprintk("In tda9875_write\n");
113 dprintk("Writing %d 0x%x\n", subaddr
, val
);
116 if (2 != i2c_master_send(client
,buffer
,2)) {
117 printk(KERN_WARNING
"tda9875: I/O error, trying (write %d 0x%x)\n",
125 static int i2c_read_register(struct i2c_adapter
*adap
, int addr
, int reg
)
127 unsigned char write
[1];
128 unsigned char read
[1];
129 struct i2c_msg msgs
[2] = {
130 { addr
, 0, 1, write
},
131 { addr
, I2C_M_RD
, 1, read
}
135 if (2 != i2c_transfer(adap
,msgs
,2)) {
136 printk(KERN_WARNING
"tda9875: I/O error (read2)\n");
139 dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg
,read
[0]);
143 static void tda9875_set(struct i2c_client
*client
)
145 struct tda9875
*tda
= i2c_get_clientdata(client
);
148 dprintk(KERN_DEBUG
"tda9875_set(%04x,%04x,%04x,%04x)\n",
149 tda
->lvol
,tda
->rvol
,tda
->bass
,tda
->treble
);
152 a
= tda
->lvol
& 0xff;
153 tda9875_write(client
, TDA9875_MVL
, a
);
155 tda9875_write(client
, TDA9875_MVR
, a
);
157 tda9875_write(client
, TDA9875_MBA
, a
);
158 a
=tda
->treble
& 0xff;
159 tda9875_write(client
, TDA9875_MTR
, a
);
162 static void do_tda9875_init(struct i2c_client
*client
)
164 struct tda9875
*t
= i2c_get_clientdata(client
);
165 dprintk("In tda9875_init\n");
166 tda9875_write(client
, TDA9875_CFG
, 0xd0 ); /*reg de config 0 (reset)*/
167 tda9875_write(client
, TDA9875_MSR
, 0x03 ); /* Monitor 0b00000XXX*/
168 tda9875_write(client
, TDA9875_C1MSB
, 0x00 ); /*Car1(FM) MSB XMHz*/
169 tda9875_write(client
, TDA9875_C1MIB
, 0x00 ); /*Car1(FM) MIB XMHz*/
170 tda9875_write(client
, TDA9875_C1LSB
, 0x00 ); /*Car1(FM) LSB XMHz*/
171 tda9875_write(client
, TDA9875_C2MSB
, 0x00 ); /*Car2(NICAM) MSB XMHz*/
172 tda9875_write(client
, TDA9875_C2MIB
, 0x00 ); /*Car2(NICAM) MIB XMHz*/
173 tda9875_write(client
, TDA9875_C2LSB
, 0x00 ); /*Car2(NICAM) LSB XMHz*/
174 tda9875_write(client
, TDA9875_DCR
, 0x00 ); /*Demod config 0x00*/
175 tda9875_write(client
, TDA9875_DEEM
, 0x44 ); /*DE-Emph 0b0100 0100*/
176 tda9875_write(client
, TDA9875_FMAT
, 0x00 ); /*FM Matrix reg 0x00*/
177 tda9875_write(client
, TDA9875_SC1
, 0x00 ); /* SCART 1 (SC1)*/
178 tda9875_write(client
, TDA9875_SC2
, 0x01 ); /* SCART 2 (sc2)*/
180 tda9875_write(client
, TDA9875_CH1V
, 0x10 ); /* Channel volume 1 mute*/
181 tda9875_write(client
, TDA9875_CH2V
, 0x10 ); /* Channel volume 2 mute */
182 tda9875_write(client
, TDA9875_DACOS
, 0x02 ); /* sig DAC i/o(in:nicam)*/
183 tda9875_write(client
, TDA9875_ADCIS
, 0x6f ); /* sig ADC input(in:mono)*/
184 tda9875_write(client
, TDA9875_LOSR
, 0x00 ); /* line out (in:mono)*/
185 tda9875_write(client
, TDA9875_AER
, 0x00 ); /*06 Effect (AVL+PSEUDO) */
186 tda9875_write(client
, TDA9875_MCS
, 0x44 ); /* Main ch select (DAC) */
187 tda9875_write(client
, TDA9875_MVL
, 0x03 ); /* Vol Main left 10dB */
188 tda9875_write(client
, TDA9875_MVR
, 0x03 ); /* Vol Main right 10dB*/
189 tda9875_write(client
, TDA9875_MBA
, 0x00 ); /* Main Bass Main 0dB*/
190 tda9875_write(client
, TDA9875_MTR
, 0x00 ); /* Main Treble Main 0dB*/
191 tda9875_write(client
, TDA9875_ACS
, 0x44 ); /* Aux chan select (dac)*/
192 tda9875_write(client
, TDA9875_AVL
, 0x00 ); /* Vol Aux left 0dB*/
193 tda9875_write(client
, TDA9875_AVR
, 0x00 ); /* Vol Aux right 0dB*/
194 tda9875_write(client
, TDA9875_ABA
, 0x00 ); /* Aux Bass Main 0dB*/
195 tda9875_write(client
, TDA9875_ATR
, 0x00 ); /* Aux Aigus Main 0dB*/
197 tda9875_write(client
, TDA9875_MUT
, 0xcc ); /* General mute */
199 t
->lvol
=t
->rvol
=0; /* 0dB */
201 t
->treble
=0; /* 0dB */
207 /* *********************** *
208 * i2c interface functions *
209 * *********************** */
211 static int tda9875_checkit(struct i2c_adapter
*adap
, int addr
)
215 dic
=i2c_read_register(adap
,addr
,254);
216 rev
=i2c_read_register(adap
,addr
,255);
218 if(dic
==0 || dic
==2) { // tda9875 and tda9875A
219 printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n",
220 dic
==0?"":"A", rev
,addr
<<1);
223 printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr
<<1,dic
,rev
);
227 static int tda9875_attach(struct i2c_adapter
*adap
, int addr
, int kind
)
230 struct i2c_client
*client
;
231 dprintk("In tda9875_attach\n");
233 t
= kzalloc(sizeof *t
,GFP_KERNEL
);
238 memcpy(client
,&client_template
,sizeof(struct i2c_client
));
239 client
->adapter
= adap
;
241 i2c_set_clientdata(client
, t
);
243 if(!tda9875_checkit(adap
,addr
)) {
248 do_tda9875_init(client
);
249 printk(KERN_INFO
"tda9875: init\n");
251 i2c_attach_client(client
);
255 static int tda9875_probe(struct i2c_adapter
*adap
)
257 if (adap
->class & I2C_CLASS_TV_ANALOG
)
258 return i2c_probe(adap
, &addr_data
, tda9875_attach
);
262 static int tda9875_detach(struct i2c_client
*client
)
264 struct tda9875
*t
= i2c_get_clientdata(client
);
266 do_tda9875_init(client
);
267 i2c_detach_client(client
);
273 static int tda9875_command(struct i2c_client
*client
,
274 unsigned int cmd
, void *arg
)
276 struct tda9875
*t
= i2c_get_clientdata(client
);
278 dprintk("In tda9875_command...\n");
281 /* --- v4l ioctls --- */
282 /* take care: bttv does userspace copying, we'll get a
283 kernel pointer here... */
286 struct video_audio
*va
= arg
;
289 dprintk("VIDIOCGAUDIO\n");
291 va
->flags
|= VIDEO_AUDIO_VOLUME
|
295 /* min is -84 max is 24 */
296 left
= (t
->lvol
+84)*606;
297 right
= (t
->rvol
+84)*606;
298 va
->volume
=max(left
,right
);
299 va
->balance
=(32768*min(left
,right
))/
300 (va
->volume
? va
->volume
: 1);
301 va
->balance
=(left
<right
)?
302 (65535-va
->balance
) : va
->balance
;
303 va
->bass
= (t
->bass
+12)*2427; /* min -12 max +15 */
304 va
->treble
= (t
->treble
+12)*2730;/* min -12 max +12 */
305 va
->mode
|= VIDEO_SOUND_MONO
;
307 break; /* VIDIOCGAUDIO case */
312 struct video_audio
*va
= arg
;
315 dprintk("VIDEOCSAUDIO...\n");
316 left
= (min(65536 - va
->balance
,32768) *
318 right
= (min(va
->balance
,(__u16
)32768) *
320 t
->lvol
= ((left
/606)-84) & 0xff;
324 t
->lvol
= -84 & 0xff;
326 t
->rvol
= ((right
/606)-84) & 0xff;
330 t
->rvol
= -84 & 0xff;
332 t
->bass
= ((va
->bass
/2400)-12) & 0xff;
336 t
->bass
= -12 & 0xff;
338 t
->treble
= ((va
->treble
/2700)-12) & 0xff;
342 t
->treble
= -12 & 0xff;
346 //printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble);
353 } /* end of VIDEOCSAUDIO case */
355 default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */
358 dprintk("Default\n");
360 } /* end of (cmd) switch */
366 static struct i2c_driver driver
= {
370 .id
= I2C_DRIVERID_TDA9875
,
371 .attach_adapter
= tda9875_probe
,
372 .detach_client
= tda9875_detach
,
373 .command
= tda9875_command
,
376 static struct i2c_client client_template
=
382 static int __init
tda9875_init(void)
384 return i2c_add_driver(&driver
);
387 static void __exit
tda9875_fini(void)
389 i2c_del_driver(&driver
);
392 module_init(tda9875_init
);
393 module_exit(tda9875_fini
);