2 * linux/drivers/media/mmc/omap.c
4 * Copyright (C) 2004 Nokia Corporation
5 * Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com>
6 * Misc hacks here and there by Tony Lindgren <tony@atomide.com>
7 * Other hacks (DMA, SD, etc) by David Brownell
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/ioport.h>
18 #include <linux/platform_device.h>
19 #include <linux/interrupt.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/delay.h>
22 #include <linux/spinlock.h>
23 #include <linux/timer.h>
24 #include <linux/mmc/host.h>
25 #include <linux/mmc/protocol.h>
26 #include <linux/mmc/card.h>
27 #include <linux/clk.h>
31 #include <asm/scatterlist.h>
32 #include <asm/mach-types.h>
34 #include <asm/arch/board.h>
35 #include <asm/arch/gpio.h>
36 #include <asm/arch/dma.h>
37 #include <asm/arch/mux.h>
38 #include <asm/arch/fpga.h>
39 #include <asm/arch/tps65010.h>
41 #define OMAP_MMC_REG_CMD 0x00
42 #define OMAP_MMC_REG_ARGL 0x04
43 #define OMAP_MMC_REG_ARGH 0x08
44 #define OMAP_MMC_REG_CON 0x0c
45 #define OMAP_MMC_REG_STAT 0x10
46 #define OMAP_MMC_REG_IE 0x14
47 #define OMAP_MMC_REG_CTO 0x18
48 #define OMAP_MMC_REG_DTO 0x1c
49 #define OMAP_MMC_REG_DATA 0x20
50 #define OMAP_MMC_REG_BLEN 0x24
51 #define OMAP_MMC_REG_NBLK 0x28
52 #define OMAP_MMC_REG_BUF 0x2c
53 #define OMAP_MMC_REG_SDIO 0x34
54 #define OMAP_MMC_REG_REV 0x3c
55 #define OMAP_MMC_REG_RSP0 0x40
56 #define OMAP_MMC_REG_RSP1 0x44
57 #define OMAP_MMC_REG_RSP2 0x48
58 #define OMAP_MMC_REG_RSP3 0x4c
59 #define OMAP_MMC_REG_RSP4 0x50
60 #define OMAP_MMC_REG_RSP5 0x54
61 #define OMAP_MMC_REG_RSP6 0x58
62 #define OMAP_MMC_REG_RSP7 0x5c
63 #define OMAP_MMC_REG_IOSR 0x60
64 #define OMAP_MMC_REG_SYSC 0x64
65 #define OMAP_MMC_REG_SYSS 0x68
67 #define OMAP_MMC_STAT_CARD_ERR (1 << 14)
68 #define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
69 #define OMAP_MMC_STAT_OCR_BUSY (1 << 12)
70 #define OMAP_MMC_STAT_A_EMPTY (1 << 11)
71 #define OMAP_MMC_STAT_A_FULL (1 << 10)
72 #define OMAP_MMC_STAT_CMD_CRC (1 << 8)
73 #define OMAP_MMC_STAT_CMD_TOUT (1 << 7)
74 #define OMAP_MMC_STAT_DATA_CRC (1 << 6)
75 #define OMAP_MMC_STAT_DATA_TOUT (1 << 5)
76 #define OMAP_MMC_STAT_END_BUSY (1 << 4)
77 #define OMAP_MMC_STAT_END_OF_DATA (1 << 3)
78 #define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
79 #define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
81 #define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
82 #define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
87 #define OMAP_MMC_CMDTYPE_BC 0
88 #define OMAP_MMC_CMDTYPE_BCR 1
89 #define OMAP_MMC_CMDTYPE_AC 2
90 #define OMAP_MMC_CMDTYPE_ADTC 3
93 #define DRIVER_NAME "mmci-omap"
95 /* Specifies how often in millisecs to poll for card status changes
96 * when the cover switch is open */
97 #define OMAP_MMC_SWITCH_POLL_DELAY 500
99 static int mmc_omap_enable_poll
= 1;
101 struct mmc_omap_host
{
104 struct mmc_request
* mrq
;
105 struct mmc_command
* cmd
;
106 struct mmc_data
* data
;
107 struct mmc_host
* mmc
;
109 unsigned char id
; /* 16xx chips have 2 MMC blocks */
112 struct resource
*mem_res
;
113 void __iomem
*virt_base
;
114 unsigned int phys_base
;
116 unsigned char bus_mode
;
117 unsigned char hw_bus_mode
;
122 u32 buffer_bytes_left
;
123 u32 total_bytes_left
;
126 unsigned brs_received
:1, dma_done
:1;
127 unsigned dma_is_read
:1;
128 unsigned dma_in_use
:1;
131 struct timer_list dma_timer
;
138 struct work_struct switch_work
;
139 struct timer_list switch_timer
;
140 int switch_last_state
;
144 mmc_omap_cover_is_open(struct mmc_omap_host
*host
)
146 if (host
->switch_pin
< 0)
148 return omap_get_gpio_datain(host
->switch_pin
);
152 mmc_omap_show_cover_switch(struct device
*dev
,
153 struct device_attribute
*attr
, char *buf
)
155 struct mmc_omap_host
*host
= dev_get_drvdata(dev
);
157 return sprintf(buf
, "%s\n", mmc_omap_cover_is_open(host
) ? "open" :
161 static DEVICE_ATTR(cover_switch
, S_IRUGO
, mmc_omap_show_cover_switch
, NULL
);
164 mmc_omap_show_enable_poll(struct device
*dev
,
165 struct device_attribute
*attr
, char *buf
)
167 return snprintf(buf
, PAGE_SIZE
, "%d\n", mmc_omap_enable_poll
);
171 mmc_omap_store_enable_poll(struct device
*dev
,
172 struct device_attribute
*attr
, const char *buf
,
177 if (sscanf(buf
, "%10d", &enable_poll
) != 1)
180 if (enable_poll
!= mmc_omap_enable_poll
) {
181 struct mmc_omap_host
*host
= dev_get_drvdata(dev
);
183 mmc_omap_enable_poll
= enable_poll
;
184 if (enable_poll
&& host
->switch_pin
>= 0)
185 schedule_work(&host
->switch_work
);
190 static DEVICE_ATTR(enable_poll
, 0664,
191 mmc_omap_show_enable_poll
, mmc_omap_store_enable_poll
);
194 mmc_omap_start_command(struct mmc_omap_host
*host
, struct mmc_command
*cmd
)
205 /* Our hardware needs to know exact type */
206 switch (mmc_resp_type(cmd
)) {
211 /* resp 1, 1b, 6, 7 */
221 dev_err(mmc_dev(host
->mmc
), "Invalid response type: %04x\n", mmc_resp_type(cmd
));
225 if (mmc_cmd_type(cmd
) == MMC_CMD_ADTC
) {
226 cmdtype
= OMAP_MMC_CMDTYPE_ADTC
;
227 } else if (mmc_cmd_type(cmd
) == MMC_CMD_BC
) {
228 cmdtype
= OMAP_MMC_CMDTYPE_BC
;
229 } else if (mmc_cmd_type(cmd
) == MMC_CMD_BCR
) {
230 cmdtype
= OMAP_MMC_CMDTYPE_BCR
;
232 cmdtype
= OMAP_MMC_CMDTYPE_AC
;
235 cmdreg
= cmd
->opcode
| (resptype
<< 8) | (cmdtype
<< 12);
237 if (host
->bus_mode
== MMC_BUSMODE_OPENDRAIN
)
240 if (cmd
->flags
& MMC_RSP_BUSY
)
243 if (host
->data
&& !(host
->data
->flags
& MMC_DATA_WRITE
))
246 clk_enable(host
->fclk
);
248 OMAP_MMC_WRITE(host
, CTO
, 200);
249 OMAP_MMC_WRITE(host
, ARGL
, cmd
->arg
& 0xffff);
250 OMAP_MMC_WRITE(host
, ARGH
, cmd
->arg
>> 16);
251 OMAP_MMC_WRITE(host
, IE
,
252 OMAP_MMC_STAT_A_EMPTY
| OMAP_MMC_STAT_A_FULL
|
253 OMAP_MMC_STAT_CMD_CRC
| OMAP_MMC_STAT_CMD_TOUT
|
254 OMAP_MMC_STAT_DATA_CRC
| OMAP_MMC_STAT_DATA_TOUT
|
255 OMAP_MMC_STAT_END_OF_CMD
| OMAP_MMC_STAT_CARD_ERR
|
256 OMAP_MMC_STAT_END_OF_DATA
);
257 OMAP_MMC_WRITE(host
, CMD
, cmdreg
);
261 mmc_omap_xfer_done(struct mmc_omap_host
*host
, struct mmc_data
*data
)
263 if (host
->dma_in_use
) {
264 enum dma_data_direction dma_data_dir
;
266 BUG_ON(host
->dma_ch
< 0);
267 if (data
->error
!= MMC_ERR_NONE
)
268 omap_stop_dma(host
->dma_ch
);
269 /* Release DMA channel lazily */
270 mod_timer(&host
->dma_timer
, jiffies
+ HZ
);
271 if (data
->flags
& MMC_DATA_WRITE
)
272 dma_data_dir
= DMA_TO_DEVICE
;
274 dma_data_dir
= DMA_FROM_DEVICE
;
275 dma_unmap_sg(mmc_dev(host
->mmc
), data
->sg
, host
->sg_len
,
280 clk_disable(host
->fclk
);
282 /* NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
283 * dozens of requests until the card finishes writing data.
284 * It'd be cheaper to just wait till an EOFB interrupt arrives...
289 mmc_request_done(host
->mmc
, data
->mrq
);
293 mmc_omap_start_command(host
, data
->stop
);
297 mmc_omap_end_of_data(struct mmc_omap_host
*host
, struct mmc_data
*data
)
302 if (!host
->dma_in_use
) {
303 mmc_omap_xfer_done(host
, data
);
307 spin_lock_irqsave(&host
->dma_lock
, flags
);
311 host
->brs_received
= 1;
312 spin_unlock_irqrestore(&host
->dma_lock
, flags
);
314 mmc_omap_xfer_done(host
, data
);
318 mmc_omap_dma_timer(unsigned long data
)
320 struct mmc_omap_host
*host
= (struct mmc_omap_host
*) data
;
322 BUG_ON(host
->dma_ch
< 0);
323 omap_free_dma(host
->dma_ch
);
328 mmc_omap_dma_done(struct mmc_omap_host
*host
, struct mmc_data
*data
)
334 spin_lock_irqsave(&host
->dma_lock
, flags
);
335 if (host
->brs_received
)
339 spin_unlock_irqrestore(&host
->dma_lock
, flags
);
341 mmc_omap_xfer_done(host
, data
);
345 mmc_omap_cmd_done(struct mmc_omap_host
*host
, struct mmc_command
*cmd
)
349 if (cmd
->flags
& MMC_RSP_PRESENT
) {
350 if (cmd
->flags
& MMC_RSP_136
) {
351 /* response type 2 */
353 OMAP_MMC_READ(host
, RSP0
) |
354 (OMAP_MMC_READ(host
, RSP1
) << 16);
356 OMAP_MMC_READ(host
, RSP2
) |
357 (OMAP_MMC_READ(host
, RSP3
) << 16);
359 OMAP_MMC_READ(host
, RSP4
) |
360 (OMAP_MMC_READ(host
, RSP5
) << 16);
362 OMAP_MMC_READ(host
, RSP6
) |
363 (OMAP_MMC_READ(host
, RSP7
) << 16);
365 /* response types 1, 1b, 3, 4, 5, 6 */
367 OMAP_MMC_READ(host
, RSP6
) |
368 (OMAP_MMC_READ(host
, RSP7
) << 16);
372 if (host
->data
== NULL
|| cmd
->error
!= MMC_ERR_NONE
) {
374 clk_disable(host
->fclk
);
375 mmc_request_done(host
->mmc
, cmd
->mrq
);
381 mmc_omap_sg_to_buf(struct mmc_omap_host
*host
)
383 struct scatterlist
*sg
;
385 sg
= host
->data
->sg
+ host
->sg_idx
;
386 host
->buffer_bytes_left
= sg
->length
;
387 host
->buffer
= page_address(sg
->page
) + sg
->offset
;
388 if (host
->buffer_bytes_left
> host
->total_bytes_left
)
389 host
->buffer_bytes_left
= host
->total_bytes_left
;
394 mmc_omap_xfer_data(struct mmc_omap_host
*host
, int write
)
398 if (host
->buffer_bytes_left
== 0) {
400 BUG_ON(host
->sg_idx
== host
->sg_len
);
401 mmc_omap_sg_to_buf(host
);
404 if (n
> host
->buffer_bytes_left
)
405 n
= host
->buffer_bytes_left
;
406 host
->buffer_bytes_left
-= n
;
407 host
->total_bytes_left
-= n
;
408 host
->data
->bytes_xfered
+= n
;
411 __raw_writesw(host
->virt_base
+ OMAP_MMC_REG_DATA
, host
->buffer
, n
);
413 __raw_readsw(host
->virt_base
+ OMAP_MMC_REG_DATA
, host
->buffer
, n
);
417 static inline void mmc_omap_report_irq(u16 status
)
419 static const char *mmc_omap_status_bits
[] = {
420 "EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
421 "CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
425 for (i
= 0; i
< ARRAY_SIZE(mmc_omap_status_bits
); i
++)
426 if (status
& (1 << i
)) {
429 printk("%s", mmc_omap_status_bits
[i
]);
434 static irqreturn_t
mmc_omap_irq(int irq
, void *dev_id
)
436 struct mmc_omap_host
* host
= (struct mmc_omap_host
*)dev_id
;
442 if (host
->cmd
== NULL
&& host
->data
== NULL
) {
443 status
= OMAP_MMC_READ(host
, STAT
);
444 dev_info(mmc_dev(host
->mmc
),"spurious irq 0x%04x\n", status
);
446 OMAP_MMC_WRITE(host
, STAT
, status
);
447 OMAP_MMC_WRITE(host
, IE
, 0);
456 while ((status
= OMAP_MMC_READ(host
, STAT
)) != 0) {
457 OMAP_MMC_WRITE(host
, STAT
, status
);
458 #ifdef CONFIG_MMC_DEBUG
459 dev_dbg(mmc_dev(host
->mmc
), "MMC IRQ %04x (CMD %d): ",
460 status
, host
->cmd
!= NULL
? host
->cmd
->opcode
: -1);
461 mmc_omap_report_irq(status
);
464 if (host
->total_bytes_left
) {
465 if ((status
& OMAP_MMC_STAT_A_FULL
) ||
466 (status
& OMAP_MMC_STAT_END_OF_DATA
))
467 mmc_omap_xfer_data(host
, 0);
468 if (status
& OMAP_MMC_STAT_A_EMPTY
)
469 mmc_omap_xfer_data(host
, 1);
472 if (status
& OMAP_MMC_STAT_END_OF_DATA
) {
476 if (status
& OMAP_MMC_STAT_DATA_TOUT
) {
477 dev_dbg(mmc_dev(host
->mmc
), "data timeout\n");
479 host
->data
->error
|= MMC_ERR_TIMEOUT
;
484 if (status
& OMAP_MMC_STAT_DATA_CRC
) {
486 host
->data
->error
|= MMC_ERR_BADCRC
;
487 dev_dbg(mmc_dev(host
->mmc
),
488 "data CRC error, bytes left %d\n",
489 host
->total_bytes_left
);
492 dev_dbg(mmc_dev(host
->mmc
), "data CRC error\n");
496 if (status
& OMAP_MMC_STAT_CMD_TOUT
) {
497 /* Timeouts are routine with some commands */
499 if (host
->cmd
->opcode
!= MMC_ALL_SEND_CID
&&
504 !mmc_omap_cover_is_open(host
))
505 dev_err(mmc_dev(host
->mmc
),
506 "command timeout, CMD %d\n",
508 host
->cmd
->error
= MMC_ERR_TIMEOUT
;
513 if (status
& OMAP_MMC_STAT_CMD_CRC
) {
515 dev_err(mmc_dev(host
->mmc
),
516 "command CRC error (CMD%d, arg 0x%08x)\n",
517 host
->cmd
->opcode
, host
->cmd
->arg
);
518 host
->cmd
->error
= MMC_ERR_BADCRC
;
521 dev_err(mmc_dev(host
->mmc
),
522 "command CRC error without cmd?\n");
525 if (status
& OMAP_MMC_STAT_CARD_ERR
) {
526 if (host
->cmd
&& host
->cmd
->opcode
== MMC_STOP_TRANSMISSION
) {
527 u32 response
= OMAP_MMC_READ(host
, RSP6
)
528 | (OMAP_MMC_READ(host
, RSP7
) << 16);
529 /* STOP sometimes sets must-ignore bits */
530 if (!(response
& (R1_CC_ERROR
532 | R1_COM_CRC_ERROR
))) {
538 dev_dbg(mmc_dev(host
->mmc
), "card status error (CMD%d)\n",
541 host
->cmd
->error
= MMC_ERR_FAILED
;
545 host
->data
->error
= MMC_ERR_FAILED
;
551 * NOTE: On 1610 the END_OF_CMD may come too early when
554 if ((status
& OMAP_MMC_STAT_END_OF_CMD
) &&
555 (!(status
& OMAP_MMC_STAT_A_EMPTY
))) {
561 mmc_omap_cmd_done(host
, host
->cmd
);
564 mmc_omap_xfer_done(host
, host
->data
);
565 else if (end_transfer
)
566 mmc_omap_end_of_data(host
, host
->data
);
571 static irqreturn_t
mmc_omap_switch_irq(int irq
, void *dev_id
)
573 struct mmc_omap_host
*host
= (struct mmc_omap_host
*) dev_id
;
575 schedule_work(&host
->switch_work
);
580 static void mmc_omap_switch_timer(unsigned long arg
)
582 struct mmc_omap_host
*host
= (struct mmc_omap_host
*) arg
;
584 schedule_work(&host
->switch_work
);
587 static void mmc_omap_switch_handler(struct work_struct
*work
)
589 struct mmc_omap_host
*host
= container_of(work
, struct mmc_omap_host
, switch_work
);
590 struct mmc_card
*card
;
591 static int complained
= 0;
592 int cards
= 0, cover_open
;
594 if (host
->switch_pin
== -1)
596 cover_open
= mmc_omap_cover_is_open(host
);
597 if (cover_open
!= host
->switch_last_state
) {
598 kobject_uevent(&host
->dev
->kobj
, KOBJ_CHANGE
);
599 host
->switch_last_state
= cover_open
;
601 mmc_detect_change(host
->mmc
, 0);
602 list_for_each_entry(card
, &host
->mmc
->cards
, node
) {
603 if (mmc_card_present(card
))
606 if (mmc_omap_cover_is_open(host
)) {
608 dev_info(mmc_dev(host
->mmc
), "cover is open");
611 if (mmc_omap_enable_poll
)
612 mod_timer(&host
->switch_timer
, jiffies
+
613 msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY
));
619 /* Prepare to transfer the next segment of a scatterlist */
621 mmc_omap_prepare_dma(struct mmc_omap_host
*host
, struct mmc_data
*data
)
623 int dma_ch
= host
->dma_ch
;
624 unsigned long data_addr
;
627 struct scatterlist
*sg
= &data
->sg
[host
->sg_idx
];
632 data_addr
= host
->phys_base
+ OMAP_MMC_REG_DATA
;
634 count
= sg_dma_len(sg
);
636 if ((data
->blocks
== 1) && (count
> data
->blksz
))
639 host
->dma_len
= count
;
641 /* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx.
642 * Use 16 or 32 word frames when the blocksize is at least that large.
643 * Blocksize is usually 512 bytes; but not for some SD reads.
645 if (cpu_is_omap15xx() && frame
> 32)
652 if (!(data
->flags
& MMC_DATA_WRITE
)) {
653 buf
= 0x800f | ((frame
- 1) << 8);
655 if (cpu_class_is_omap1()) {
656 src_port
= OMAP_DMA_PORT_TIPB
;
657 dst_port
= OMAP_DMA_PORT_EMIFF
;
659 if (cpu_is_omap24xx())
660 sync_dev
= OMAP24XX_DMA_MMC1_RX
;
662 omap_set_dma_src_params(dma_ch
, src_port
,
663 OMAP_DMA_AMODE_CONSTANT
,
665 omap_set_dma_dest_params(dma_ch
, dst_port
,
666 OMAP_DMA_AMODE_POST_INC
,
667 sg_dma_address(sg
), 0, 0);
668 omap_set_dma_dest_data_pack(dma_ch
, 1);
669 omap_set_dma_dest_burst_mode(dma_ch
, OMAP_DMA_DATA_BURST_4
);
671 buf
= 0x0f80 | ((frame
- 1) << 0);
673 if (cpu_class_is_omap1()) {
674 src_port
= OMAP_DMA_PORT_EMIFF
;
675 dst_port
= OMAP_DMA_PORT_TIPB
;
677 if (cpu_is_omap24xx())
678 sync_dev
= OMAP24XX_DMA_MMC1_TX
;
680 omap_set_dma_dest_params(dma_ch
, dst_port
,
681 OMAP_DMA_AMODE_CONSTANT
,
683 omap_set_dma_src_params(dma_ch
, src_port
,
684 OMAP_DMA_AMODE_POST_INC
,
685 sg_dma_address(sg
), 0, 0);
686 omap_set_dma_src_data_pack(dma_ch
, 1);
687 omap_set_dma_src_burst_mode(dma_ch
, OMAP_DMA_DATA_BURST_4
);
690 /* Max limit for DMA frame count is 0xffff */
691 BUG_ON(count
> 0xffff);
693 OMAP_MMC_WRITE(host
, BUF
, buf
);
694 omap_set_dma_transfer_params(dma_ch
, OMAP_DMA_DATA_TYPE_S16
,
695 frame
, count
, OMAP_DMA_SYNC_FRAME
,
699 /* A scatterlist segment completed */
700 static void mmc_omap_dma_cb(int lch
, u16 ch_status
, void *data
)
702 struct mmc_omap_host
*host
= (struct mmc_omap_host
*) data
;
703 struct mmc_data
*mmcdat
= host
->data
;
705 if (unlikely(host
->dma_ch
< 0)) {
706 dev_err(mmc_dev(host
->mmc
),
707 "DMA callback while DMA not enabled\n");
710 /* FIXME: We really should do something to _handle_ the errors */
711 if (ch_status
& OMAP1_DMA_TOUT_IRQ
) {
712 dev_err(mmc_dev(host
->mmc
),"DMA timeout\n");
715 if (ch_status
& OMAP_DMA_DROP_IRQ
) {
716 dev_err(mmc_dev(host
->mmc
), "DMA sync error\n");
719 if (!(ch_status
& OMAP_DMA_BLOCK_IRQ
)) {
722 mmcdat
->bytes_xfered
+= host
->dma_len
;
724 if (host
->sg_idx
< host
->sg_len
) {
725 mmc_omap_prepare_dma(host
, host
->data
);
726 omap_start_dma(host
->dma_ch
);
728 mmc_omap_dma_done(host
, host
->data
);
731 static int mmc_omap_get_dma_channel(struct mmc_omap_host
*host
, struct mmc_data
*data
)
733 const char *dev_name
;
734 int sync_dev
, dma_ch
, is_read
, r
;
736 is_read
= !(data
->flags
& MMC_DATA_WRITE
);
737 del_timer_sync(&host
->dma_timer
);
738 if (host
->dma_ch
>= 0) {
739 if (is_read
== host
->dma_is_read
)
741 omap_free_dma(host
->dma_ch
);
747 sync_dev
= OMAP_DMA_MMC_RX
;
748 dev_name
= "MMC1 read";
750 sync_dev
= OMAP_DMA_MMC2_RX
;
751 dev_name
= "MMC2 read";
755 sync_dev
= OMAP_DMA_MMC_TX
;
756 dev_name
= "MMC1 write";
758 sync_dev
= OMAP_DMA_MMC2_TX
;
759 dev_name
= "MMC2 write";
762 r
= omap_request_dma(sync_dev
, dev_name
, mmc_omap_dma_cb
,
765 dev_dbg(mmc_dev(host
->mmc
), "omap_request_dma() failed with %d\n", r
);
768 host
->dma_ch
= dma_ch
;
769 host
->dma_is_read
= is_read
;
774 static inline void set_cmd_timeout(struct mmc_omap_host
*host
, struct mmc_request
*req
)
778 reg
= OMAP_MMC_READ(host
, SDIO
);
780 OMAP_MMC_WRITE(host
, SDIO
, reg
);
781 /* Set maximum timeout */
782 OMAP_MMC_WRITE(host
, CTO
, 0xff);
785 static inline void set_data_timeout(struct mmc_omap_host
*host
, struct mmc_request
*req
)
790 /* Convert ns to clock cycles by assuming 20MHz frequency
791 * 1 cycle at 20MHz = 500 ns
793 timeout
= req
->data
->timeout_clks
+ req
->data
->timeout_ns
/ 500;
795 /* Check if we need to use timeout multiplier register */
796 reg
= OMAP_MMC_READ(host
, SDIO
);
797 if (timeout
> 0xffff) {
802 OMAP_MMC_WRITE(host
, SDIO
, reg
);
803 OMAP_MMC_WRITE(host
, DTO
, timeout
);
807 mmc_omap_prepare_data(struct mmc_omap_host
*host
, struct mmc_request
*req
)
809 struct mmc_data
*data
= req
->data
;
810 int i
, use_dma
, block_size
;
815 OMAP_MMC_WRITE(host
, BLEN
, 0);
816 OMAP_MMC_WRITE(host
, NBLK
, 0);
817 OMAP_MMC_WRITE(host
, BUF
, 0);
818 host
->dma_in_use
= 0;
819 set_cmd_timeout(host
, req
);
823 block_size
= data
->blksz
;
825 OMAP_MMC_WRITE(host
, NBLK
, data
->blocks
- 1);
826 OMAP_MMC_WRITE(host
, BLEN
, block_size
- 1);
827 set_data_timeout(host
, req
);
829 /* cope with calling layer confusion; it issues "single
830 * block" writes using multi-block scatterlists.
832 sg_len
= (data
->blocks
== 1) ? 1 : data
->sg_len
;
834 /* Only do DMA for entire blocks */
835 use_dma
= host
->use_dma
;
837 for (i
= 0; i
< sg_len
; i
++) {
838 if ((data
->sg
[i
].length
% block_size
) != 0) {
847 if (mmc_omap_get_dma_channel(host
, data
) == 0) {
848 enum dma_data_direction dma_data_dir
;
850 if (data
->flags
& MMC_DATA_WRITE
)
851 dma_data_dir
= DMA_TO_DEVICE
;
853 dma_data_dir
= DMA_FROM_DEVICE
;
855 host
->sg_len
= dma_map_sg(mmc_dev(host
->mmc
), data
->sg
,
856 sg_len
, dma_data_dir
);
857 host
->total_bytes_left
= 0;
858 mmc_omap_prepare_dma(host
, req
->data
);
859 host
->brs_received
= 0;
861 host
->dma_in_use
= 1;
868 OMAP_MMC_WRITE(host
, BUF
, 0x1f1f);
869 host
->total_bytes_left
= data
->blocks
* block_size
;
870 host
->sg_len
= sg_len
;
871 mmc_omap_sg_to_buf(host
);
872 host
->dma_in_use
= 0;
876 static void mmc_omap_request(struct mmc_host
*mmc
, struct mmc_request
*req
)
878 struct mmc_omap_host
*host
= mmc_priv(mmc
);
880 WARN_ON(host
->mrq
!= NULL
);
884 /* only touch fifo AFTER the controller readies it */
885 mmc_omap_prepare_data(host
, req
);
886 mmc_omap_start_command(host
, req
->cmd
);
887 if (host
->dma_in_use
)
888 omap_start_dma(host
->dma_ch
);
891 static void innovator_fpga_socket_power(int on
)
893 #if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
895 fpga_write(fpga_read(OMAP1510_FPGA_POWER
) | (1 << 3),
896 OMAP1510_FPGA_POWER
);
898 fpga_write(fpga_read(OMAP1510_FPGA_POWER
) & ~(1 << 3),
899 OMAP1510_FPGA_POWER
);
905 * Turn the socket power on/off. Innovator uses FPGA, most boards
908 static void mmc_omap_power(struct mmc_omap_host
*host
, int on
)
911 if (machine_is_omap_innovator())
912 innovator_fpga_socket_power(1);
913 else if (machine_is_omap_h2())
914 tps65010_set_gpio_out_value(GPIO3
, HIGH
);
915 else if (machine_is_omap_h3())
916 /* GPIO 4 of TPS65010 sends SD_EN signal */
917 tps65010_set_gpio_out_value(GPIO4
, HIGH
);
918 else if (cpu_is_omap24xx()) {
919 u16 reg
= OMAP_MMC_READ(host
, CON
);
920 OMAP_MMC_WRITE(host
, CON
, reg
| (1 << 11));
922 if (host
->power_pin
>= 0)
923 omap_set_gpio_dataout(host
->power_pin
, 1);
925 if (machine_is_omap_innovator())
926 innovator_fpga_socket_power(0);
927 else if (machine_is_omap_h2())
928 tps65010_set_gpio_out_value(GPIO3
, LOW
);
929 else if (machine_is_omap_h3())
930 tps65010_set_gpio_out_value(GPIO4
, LOW
);
931 else if (cpu_is_omap24xx()) {
932 u16 reg
= OMAP_MMC_READ(host
, CON
);
933 OMAP_MMC_WRITE(host
, CON
, reg
& ~(1 << 11));
935 if (host
->power_pin
>= 0)
936 omap_set_gpio_dataout(host
->power_pin
, 0);
940 static void mmc_omap_set_ios(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
942 struct mmc_omap_host
*host
= mmc_priv(mmc
);
946 realclock
= ios
->clock
;
951 int func_clk_rate
= clk_get_rate(host
->fclk
);
953 dsor
= func_clk_rate
/ realclock
;
957 if (func_clk_rate
/ dsor
> realclock
)
964 if (ios
->bus_width
== MMC_BUS_WIDTH_4
)
968 switch (ios
->power_mode
) {
970 mmc_omap_power(host
, 0);
974 mmc_omap_power(host
, 1);
979 host
->bus_mode
= ios
->bus_mode
;
980 host
->hw_bus_mode
= host
->bus_mode
;
982 clk_enable(host
->fclk
);
984 /* On insanely high arm_per frequencies something sometimes
985 * goes somehow out of sync, and the POW bit is not being set,
986 * which results in the while loop below getting stuck.
987 * Writing to the CON register twice seems to do the trick. */
988 for (i
= 0; i
< 2; i
++)
989 OMAP_MMC_WRITE(host
, CON
, dsor
);
990 if (ios
->power_mode
== MMC_POWER_UP
) {
991 /* Send clock cycles, poll completion */
992 OMAP_MMC_WRITE(host
, IE
, 0);
993 OMAP_MMC_WRITE(host
, STAT
, 0xffff);
994 OMAP_MMC_WRITE(host
, CMD
, 1 << 7);
995 while ((OMAP_MMC_READ(host
, STAT
) & 1) == 0);
996 OMAP_MMC_WRITE(host
, STAT
, 1);
998 clk_disable(host
->fclk
);
1001 static int mmc_omap_get_ro(struct mmc_host
*mmc
)
1003 struct mmc_omap_host
*host
= mmc_priv(mmc
);
1005 return host
->wp_pin
&& omap_get_gpio_datain(host
->wp_pin
);
1008 static const struct mmc_host_ops mmc_omap_ops
= {
1009 .request
= mmc_omap_request
,
1010 .set_ios
= mmc_omap_set_ios
,
1011 .get_ro
= mmc_omap_get_ro
,
1014 static int __init
mmc_omap_probe(struct platform_device
*pdev
)
1016 struct omap_mmc_conf
*minfo
= pdev
->dev
.platform_data
;
1017 struct mmc_host
*mmc
;
1018 struct mmc_omap_host
*host
= NULL
;
1019 struct resource
*res
;
1023 if (minfo
== NULL
) {
1024 dev_err(&pdev
->dev
, "platform data missing\n");
1028 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1029 irq
= platform_get_irq(pdev
, 0);
1030 if (res
== NULL
|| irq
< 0)
1033 res
= request_mem_region(res
->start
, res
->end
- res
->start
+ 1,
1038 mmc
= mmc_alloc_host(sizeof(struct mmc_omap_host
), &pdev
->dev
);
1041 goto err_free_mem_region
;
1044 host
= mmc_priv(mmc
);
1047 spin_lock_init(&host
->dma_lock
);
1048 init_timer(&host
->dma_timer
);
1049 host
->dma_timer
.function
= mmc_omap_dma_timer
;
1050 host
->dma_timer
.data
= (unsigned long) host
;
1052 host
->id
= pdev
->id
;
1053 host
->mem_res
= res
;
1056 if (cpu_is_omap24xx()) {
1057 host
->iclk
= clk_get(&pdev
->dev
, "mmc_ick");
1058 if (IS_ERR(host
->iclk
))
1059 goto err_free_mmc_host
;
1060 clk_enable(host
->iclk
);
1063 if (!cpu_is_omap24xx())
1064 host
->fclk
= clk_get(&pdev
->dev
, "mmc_ck");
1066 host
->fclk
= clk_get(&pdev
->dev
, "mmc_fck");
1068 if (IS_ERR(host
->fclk
)) {
1069 ret
= PTR_ERR(host
->fclk
);
1074 * Also, use minfo->cover to decide how to manage
1075 * the card detect sensing.
1077 host
->power_pin
= minfo
->power_pin
;
1078 host
->switch_pin
= minfo
->switch_pin
;
1079 host
->wp_pin
= minfo
->wp_pin
;
1084 host
->phys_base
= host
->mem_res
->start
;
1085 host
->virt_base
= (void __iomem
*) IO_ADDRESS(host
->phys_base
);
1087 mmc
->ops
= &mmc_omap_ops
;
1088 mmc
->f_min
= 400000;
1089 mmc
->f_max
= 24000000;
1090 mmc
->ocr_avail
= MMC_VDD_32_33
| MMC_VDD_33_34
;
1091 mmc
->caps
= MMC_CAP_MULTIWRITE
| MMC_CAP_BYTEBLOCK
;
1094 mmc
->caps
|= MMC_CAP_4_BIT_DATA
;
1096 /* Use scatterlist DMA to reduce per-transfer costs.
1097 * NOTE max_seg_size assumption that small blocks aren't
1098 * normally used (except e.g. for reading SD registers).
1100 mmc
->max_phys_segs
= 32;
1101 mmc
->max_hw_segs
= 32;
1102 mmc
->max_sectors
= 256; /* NBLK max 11-bits, OMAP also limited by DMA */
1103 mmc
->max_seg_size
= mmc
->max_sectors
* 512;
1105 if (host
->power_pin
>= 0) {
1106 if ((ret
= omap_request_gpio(host
->power_pin
)) != 0) {
1107 dev_err(mmc_dev(host
->mmc
),
1108 "Unable to get GPIO pin for MMC power\n");
1111 omap_set_gpio_direction(host
->power_pin
, 0);
1114 ret
= request_irq(host
->irq
, mmc_omap_irq
, 0, DRIVER_NAME
, host
);
1116 goto err_free_power_gpio
;
1118 host
->dev
= &pdev
->dev
;
1119 platform_set_drvdata(pdev
, host
);
1121 if (host
->switch_pin
>= 0) {
1122 INIT_WORK(&host
->switch_work
, mmc_omap_switch_handler
);
1123 init_timer(&host
->switch_timer
);
1124 host
->switch_timer
.function
= mmc_omap_switch_timer
;
1125 host
->switch_timer
.data
= (unsigned long) host
;
1126 if (omap_request_gpio(host
->switch_pin
) != 0) {
1127 dev_warn(mmc_dev(host
->mmc
), "Unable to get GPIO pin for MMC cover switch\n");
1128 host
->switch_pin
= -1;
1132 omap_set_gpio_direction(host
->switch_pin
, 1);
1133 ret
= request_irq(OMAP_GPIO_IRQ(host
->switch_pin
),
1134 mmc_omap_switch_irq
, IRQF_TRIGGER_RISING
, DRIVER_NAME
, host
);
1136 dev_warn(mmc_dev(host
->mmc
), "Unable to get IRQ for MMC cover switch\n");
1137 omap_free_gpio(host
->switch_pin
);
1138 host
->switch_pin
= -1;
1141 ret
= device_create_file(&pdev
->dev
, &dev_attr_cover_switch
);
1143 ret
= device_create_file(&pdev
->dev
, &dev_attr_enable_poll
);
1145 device_remove_file(&pdev
->dev
, &dev_attr_cover_switch
);
1148 dev_warn(mmc_dev(host
->mmc
), "Unable to create sysfs attributes\n");
1149 free_irq(OMAP_GPIO_IRQ(host
->switch_pin
), host
);
1150 omap_free_gpio(host
->switch_pin
);
1151 host
->switch_pin
= -1;
1154 if (mmc_omap_enable_poll
&& mmc_omap_cover_is_open(host
))
1155 schedule_work(&host
->switch_work
);
1163 /* FIXME: Free other resources too. */
1165 if (host
->iclk
&& !IS_ERR(host
->iclk
))
1166 clk_put(host
->iclk
);
1167 if (host
->fclk
&& !IS_ERR(host
->fclk
))
1168 clk_put(host
->fclk
);
1169 mmc_free_host(host
->mmc
);
1171 err_free_power_gpio
:
1172 if (host
->power_pin
>= 0)
1173 omap_free_gpio(host
->power_pin
);
1175 clk_put(host
->fclk
);
1177 if (host
->iclk
!= NULL
) {
1178 clk_disable(host
->iclk
);
1179 clk_put(host
->iclk
);
1182 mmc_free_host(host
->mmc
);
1183 err_free_mem_region
:
1184 release_mem_region(res
->start
, res
->end
- res
->start
+ 1);
1188 static int mmc_omap_remove(struct platform_device
*pdev
)
1190 struct mmc_omap_host
*host
= platform_get_drvdata(pdev
);
1192 platform_set_drvdata(pdev
, NULL
);
1194 BUG_ON(host
== NULL
);
1196 mmc_remove_host(host
->mmc
);
1197 free_irq(host
->irq
, host
);
1199 if (host
->power_pin
>= 0)
1200 omap_free_gpio(host
->power_pin
);
1201 if (host
->switch_pin
>= 0) {
1202 device_remove_file(&pdev
->dev
, &dev_attr_enable_poll
);
1203 device_remove_file(&pdev
->dev
, &dev_attr_cover_switch
);
1204 free_irq(OMAP_GPIO_IRQ(host
->switch_pin
), host
);
1205 omap_free_gpio(host
->switch_pin
);
1206 host
->switch_pin
= -1;
1207 del_timer_sync(&host
->switch_timer
);
1208 flush_scheduled_work();
1210 if (host
->iclk
&& !IS_ERR(host
->iclk
))
1211 clk_put(host
->iclk
);
1212 if (host
->fclk
&& !IS_ERR(host
->fclk
))
1213 clk_put(host
->fclk
);
1215 release_mem_region(pdev
->resource
[0].start
,
1216 pdev
->resource
[0].end
- pdev
->resource
[0].start
+ 1);
1218 mmc_free_host(host
->mmc
);
1224 static int mmc_omap_suspend(struct platform_device
*pdev
, pm_message_t mesg
)
1227 struct mmc_omap_host
*host
= platform_get_drvdata(pdev
);
1229 if (host
&& host
->suspended
)
1233 ret
= mmc_suspend_host(host
->mmc
, mesg
);
1235 host
->suspended
= 1;
1240 static int mmc_omap_resume(struct platform_device
*pdev
)
1243 struct mmc_omap_host
*host
= platform_get_drvdata(pdev
);
1245 if (host
&& !host
->suspended
)
1249 ret
= mmc_resume_host(host
->mmc
);
1251 host
->suspended
= 0;
1257 #define mmc_omap_suspend NULL
1258 #define mmc_omap_resume NULL
1261 static struct platform_driver mmc_omap_driver
= {
1262 .probe
= mmc_omap_probe
,
1263 .remove
= mmc_omap_remove
,
1264 .suspend
= mmc_omap_suspend
,
1265 .resume
= mmc_omap_resume
,
1267 .name
= DRIVER_NAME
,
1271 static int __init
mmc_omap_init(void)
1273 return platform_driver_register(&mmc_omap_driver
);
1276 static void __exit
mmc_omap_exit(void)
1278 platform_driver_unregister(&mmc_omap_driver
);
1281 module_init(mmc_omap_init
);
1282 module_exit(mmc_omap_exit
);
1284 MODULE_DESCRIPTION("OMAP Multimedia Card driver");
1285 MODULE_LICENSE("GPL");
1286 MODULE_ALIAS(DRIVER_NAME
);
1287 MODULE_AUTHOR("Juha Yrjölä");