include/drm/drm_device.h

   1 #ifndef _DRM_DEVICE_H_
   2 #define _DRM_DEVICE_H_
   3
   4 #include <linux/list.h>
   5 #include <linux/kref.h>
   6 #include <linux/mutex.h>
   7 #include <linux/idr.h>
   8
   9 #include <drm/drm_hashtab.h>
  10 #include <drm/drm_mode_config.h>
  11
  12 struct drm_driver;
  13 struct drm_minor;
  14 struct drm_master;
  15 struct drm_device_dma;
  16 struct drm_vblank_crtc;
  17 struct drm_sg_mem;
  18 struct drm_local_map;
  19 struct drm_vma_offset_manager;
  20 struct drm_vram_mm;
  21 struct drm_fb_helper;
  22
  23 struct inode;
  24
  25 struct pci_dev;
  26 struct pci_controller;
  27
  28
  29 /**
  30  * enum drm_switch_power - power state of drm device
  31  */
  32
  33 enum switch_power_state {
  34         /** @DRM_SWITCH_POWER_ON: Power state is ON */
  35         DRM_SWITCH_POWER_ON = 0,
  36
  37         /** @DRM_SWITCH_POWER_OFF: Power state is OFF */
  38         DRM_SWITCH_POWER_OFF = 1,
  39
  40         /** @DRM_SWITCH_POWER_CHANGING: Power state is changing */
  41         DRM_SWITCH_POWER_CHANGING = 2,
  42
  43         /** @DRM_SWITCH_POWER_DYNAMIC_OFF: Suspended */
  44         DRM_SWITCH_POWER_DYNAMIC_OFF = 3,
  45 };
  46
  47 /**
  48  * struct drm_device - DRM device structure
  49  *
  50  * This structure represent a complete card that
  51  * may contain multiple heads.
  52  */
  53 struct drm_device {
  54         /**
  55          * @legacy_dev_list:
  56          *
  57          * List of devices per driver for stealth attach cleanup
  58          */
  59         struct list_head legacy_dev_list;
  60
  61         /** @if_version: Highest interface version set */
  62         int if_version;
  63
  64         /** @ref: Object ref-count */
  65         struct kref ref;
  66
  67         /** @dev: Device structure of bus-device */
  68         struct device *dev;
  69
  70         /** @driver: DRM driver managing the device */
  71         struct drm_driver *driver;
  72
  73         /**
  74          * @dev_private:
  75          *
  76          * DRM driver private data. Instead of using this pointer it is
  77          * recommended that drivers use drm_dev_init() and embed struct
  78          * &drm_device in their larger per-device structure.
  79          */
  80         void *dev_private;
  81
  82         /** @primary: Primary node */
  83         struct drm_minor *primary;
  84
  85         /** @render: Render node */
  86         struct drm_minor *render;
  87
  88         /**
  89          * @registered:
  90          *
  91          * Internally used by drm_dev_register() and drm_connector_register().
  92          */
  93         bool registered;
  94
  95         /**
  96          * @master:
  97          *
  98          * Currently active master for this device.
  99          * Protected by &master_mutex
 100          */
 101         struct drm_master *master;
 102
 103         /**
 104          * @driver_features: per-device driver features
 105          *
 106          * Drivers can clear specific flags here to disallow
 107          * certain features on a per-device basis while still
 108          * sharing a single &struct drm_driver instance across
 109          * all devices.
 110          */
 111         u32 driver_features;
 112
 113         /**
 114          * @unplugged:
 115          *
 116          * Flag to tell if the device has been unplugged.
 117          * See drm_dev_enter() and drm_dev_is_unplugged().
 118          */
 119         bool unplugged;
 120
 121         /** @anon_inode: inode for private address-space */
 122         struct inode *anon_inode;
 123
 124         /** @unique: Unique name of the device */
 125         char *unique;
 126
 127         /**
 128          * @struct_mutex:
 129          *
 130          * Lock for others (not &drm_minor.master and &drm_file.is_master)
 131          */
 132         struct mutex struct_mutex;
 133
 134         /**
 135          * @master_mutex:
 136          *
 137          * Lock for &drm_minor.master and &drm_file.is_master
 138          */
 139         struct mutex master_mutex;
 140
 141         /**
 142          * @open_count:
 143          *
 144          * Usage counter for outstanding files open,
 145          * protected by drm_global_mutex
 146          */
 147         atomic_t open_count;
 148
 149         /** @filelist_mutex: Protects @filelist. */
 150         struct mutex filelist_mutex;
 151         /**
 152          * @filelist:
 153          *
 154          * List of userspace clients, linked through &drm_file.lhead.
 155          */
 156         struct list_head filelist;
 157
 158         /**
 159          * @filelist_internal:
 160          *
 161          * List of open DRM files for in-kernel clients.
 162          * Protected by &filelist_mutex.
 163          */
 164         struct list_head filelist_internal;
 165
 166         /**
 167          * @clientlist_mutex:
 168          *
 169          * Protects &clientlist access.
 170          */
 171         struct mutex clientlist_mutex;
 172
 173         /**
 174          * @clientlist:
 175          *
 176          * List of in-kernel clients. Protected by &clientlist_mutex.
 177          */
 178         struct list_head clientlist;
 179
 180         /**
 181          * @irq_enabled:
 182          *
 183          * Indicates that interrupt handling is enabled, specifically vblank
 184          * handling. Drivers which don't use drm_irq_install() need to set this
 185          * to true manually.
 186          */
 187         bool irq_enabled;
 188
 189         /**
 190          * @irq: Used by the drm_irq_install() and drm_irq_unistall() helpers.
 191          */
 192         int irq;
 193
 194         /**
 195          * @vblank_disable_immediate:
 196          *
 197          * If true, vblank interrupt will be disabled immediately when the
 198          * refcount drops to zero, as opposed to via the vblank disable
 199          * timer.
 200          *
 201          * This can be set to true it the hardware has a working vblank counter
 202          * with high-precision timestamping (otherwise there are races) and the
 203          * driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off()
 204          * appropriately. See also @max_vblank_count and
 205          * &drm_crtc_funcs.get_vblank_counter.
 206          */
 207         bool vblank_disable_immediate;
 208
 209         /**
 210          * @vblank:
 211          *
 212          * Array of vblank tracking structures, one per &struct drm_crtc. For
 213          * historical reasons (vblank support predates kernel modesetting) this
 214          * is free-standing and not part of &struct drm_crtc itself. It must be
 215          * initialized explicitly by calling drm_vblank_init().
 216          */
 217         struct drm_vblank_crtc *vblank;
 218
 219         /**
 220          * @vblank_time_lock:
 221          *
 222          *  Protects vblank count and time updates during vblank enable/disable
 223          */
 224         spinlock_t vblank_time_lock;
 225         /**
 226          * @vbl_lock: Top-level vblank references lock, wraps the low-level
 227          * @vblank_time_lock.
 228          */
 229         spinlock_t vbl_lock;
 230
 231         /**
 232          * @max_vblank_count:
 233          *
 234          * Maximum value of the vblank registers. This value +1 will result in a
 235          * wrap-around of the vblank register. It is used by the vblank core to
 236          * handle wrap-arounds.
 237          *
 238          * If set to zero the vblank core will try to guess the elapsed vblanks
 239          * between times when the vblank interrupt is disabled through
 240          * high-precision timestamps. That approach is suffering from small
 241          * races and imprecision over longer time periods, hence exposing a
 242          * hardware vblank counter is always recommended.
 243          *
 244          * This is the statically configured device wide maximum. The driver
 245          * can instead choose to use a runtime configurable per-crtc value
 246          * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
 247          * must be left at zero. See drm_crtc_set_max_vblank_count() on how
 248          * to use the per-crtc value.
 249          *
 250          * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
 251          */
 252         u32 max_vblank_count;
 253
 254         /** @vblank_event_list: List of vblank events */
 255         struct list_head vblank_event_list;
 256
 257         /**
 258          * @event_lock:
 259          *
 260          * Protects @vblank_event_list and event delivery in
 261          * general. See drm_send_event() and drm_send_event_locked().
 262          */
 263         spinlock_t event_lock;
 264
 265         /** @agp: AGP data */
 266         struct drm_agp_head *agp;
 267
 268         /** @pdev: PCI device structure */
 269         struct pci_dev *pdev;
 270
 271 #ifdef __alpha__
 272         /** @hose: PCI hose, only used on ALPHA platforms. */
 273         struct pci_controller *hose;
 274 #endif
 275         /** @num_crtcs: Number of CRTCs on this device */
 276         unsigned int num_crtcs;
 277
 278         /** @mode_config: Current mode config */
 279         struct drm_mode_config mode_config;
 280
 281         /** @object_name_lock: GEM information */
 282         struct mutex object_name_lock;
 283
 284         /** @object_name_idr: GEM information */
 285         struct idr object_name_idr;
 286
 287         /** @vma_offset_manager: GEM information */
 288         struct drm_vma_offset_manager *vma_offset_manager;
 289
 290         /** @vram_mm: VRAM MM memory manager */
 291         struct drm_vram_mm *vram_mm;
 292
 293         /**
 294          * @switch_power_state:
 295          *
 296          * Power state of the client.
 297          * Used by drivers supporting the switcheroo driver.
 298          * The state is maintained in the
 299          * &vga_switcheroo_client_ops.set_gpu_state callback
 300          */
 301         enum switch_power_state switch_power_state;
 302
 303         /**
 304          * @fb_helper:
 305          *
 306          * Pointer to the fbdev emulation structure.
 307          * Set by drm_fb_helper_init() and cleared by drm_fb_helper_fini().
 308          */
 309         struct drm_fb_helper *fb_helper;
 310
 311         /* Everything below here is for legacy driver, never use! */
 312         /* private: */
 313 #if IS_ENABLED(CONFIG_DRM_LEGACY)
 314         /* Context handle management - linked list of context handles */
 315         struct list_head ctxlist;
 316
 317         /* Context handle management - mutex for &ctxlist */
 318         struct mutex ctxlist_mutex;
 319
 320         /* Context handle management */
 321         struct idr ctx_idr;
 322
 323         /* Memory management - linked list of regions */
 324         struct list_head maplist;
 325
 326         /* Memory management - user token hash table for maps */
 327         struct drm_open_hash map_hash;
 328
 329         /* Context handle management - list of vmas (for debugging) */
 330         struct list_head vmalist;
 331
 332         /* Optional pointer for DMA support */
 333         struct drm_device_dma *dma;
 334
 335         /* Context swapping flag */
 336         __volatile__ long context_flag;
 337
 338         /* Last current context */
 339         int last_context;
 340
 341         /* Lock for &buf_use and a few other things. */
 342         spinlock_t buf_lock;
 343
 344         /* Usage counter for buffers in use -- cannot alloc */
 345         int buf_use;
 346
 347         /* Buffer allocation in progress */
 348         atomic_t buf_alloc;
 349
 350         struct {
 351                 int context;
 352                 struct drm_hw_lock *lock;
 353         } sigdata;
 354
 355         struct drm_local_map *agp_buffer_map;
 356         unsigned int agp_buffer_token;
 357
 358         /* Scatter gather memory */
 359         struct drm_sg_mem *sg;
 360 #endif
 361 };
 362
 363 #endif