Linux 4.9.243

[linux/fpc-iii.git] / drivers / gpu / drm / drm_mode_object.c

/*
 * Copyright (c) 2016 Intel Corporation
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 */

#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_mode_object.h>

#include "drm_crtc_internal.h"

/*
 * Internal function to assign a slot in the object idr and optionally
 * register the object into the idr.
 */
int drm_mode_object_get_reg(struct drm_device *dev,
                            struct drm_mode_object *obj,
                            uint32_t obj_type,
                            bool register_obj,
                            void (*obj_free_cb)(struct kref *kref))
{
        int ret;

        mutex_lock(&dev->mode_config.idr_mutex);
        ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL);
        if (ret >= 0) {
                /*
                 * Set up the object linking under the protection of the idr
                 * lock so that other users can't see inconsistent state.
                 */
                obj->id = ret;
                obj->type = obj_type;
                if (obj_free_cb) {
                        obj->free_cb = obj_free_cb;
                        kref_init(&obj->refcount);
                }
        }
        mutex_unlock(&dev->mode_config.idr_mutex);

        return ret < 0 ? ret : 0;
}

/**
 * drm_mode_object_get - allocate a new modeset identifier
 * @dev: DRM device
 * @obj: object pointer, used to generate unique ID
 * @obj_type: object type
 *
 * Create a unique identifier based on @ptr in @dev's identifier space.  Used
 * for tracking modes, CRTCs and connectors. Note that despite the _get postfix
 * modeset identifiers are _not_ reference counted. Hence don't use this for
 * reference counted modeset objects like framebuffers.
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_mode_object_get(struct drm_device *dev,
                        struct drm_mode_object *obj, uint32_t obj_type)
{
        return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL);
}

void drm_mode_object_register(struct drm_device *dev,
                              struct drm_mode_object *obj)
{
        mutex_lock(&dev->mode_config.idr_mutex);
        idr_replace(&dev->mode_config.crtc_idr, obj, obj->id);
        mutex_unlock(&dev->mode_config.idr_mutex);
}

/**
 * drm_mode_object_unregister - free a modeset identifer
 * @dev: DRM device
 * @object: object to free
 *
 * Free @id from @dev's unique identifier pool.
 * This function can be called multiple times, and guards against
 * multiple removals.
 * These modeset identifiers are _not_ reference counted. Hence don't use this
 * for reference counted modeset objects like framebuffers.
 */
void drm_mode_object_unregister(struct drm_device *dev,
                                struct drm_mode_object *object)
{
        mutex_lock(&dev->mode_config.idr_mutex);
        if (object->id) {
                idr_remove(&dev->mode_config.crtc_idr, object->id);
                object->id = 0;
        }
        mutex_unlock(&dev->mode_config.idr_mutex);
}

struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev,
                                               uint32_t id, uint32_t type)
{
        struct drm_mode_object *obj = NULL;

        mutex_lock(&dev->mode_config.idr_mutex);
        obj = idr_find(&dev->mode_config.crtc_idr, id);
        if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type)
                obj = NULL;
        if (obj && obj->id != id)
                obj = NULL;

        if (obj && obj->free_cb) {
                if (!kref_get_unless_zero(&obj->refcount))
                        obj = NULL;
        }
        mutex_unlock(&dev->mode_config.idr_mutex);

        return obj;
}

/**
 * drm_mode_object_find - look up a drm object with static lifetime
 * @dev: drm device
 * @id: id of the mode object
 * @type: type of the mode object
 *
 * This function is used to look up a modeset object. It will acquire a
 * reference for reference counted objects. This reference must be dropped again
 * by callind drm_mode_object_unreference().
 */
struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
                uint32_t id, uint32_t type)
{
        struct drm_mode_object *obj = NULL;

        obj = __drm_mode_object_find(dev, id, type);
        return obj;
}
EXPORT_SYMBOL(drm_mode_object_find);

/**
 * drm_mode_object_unreference - decr the object refcnt
 * @obj: mode_object
 *
 * This function decrements the object's refcount if it is a refcounted modeset
 * object. It is a no-op on any other object. This is used to drop references
 * acquired with drm_mode_object_reference().
 */
void drm_mode_object_unreference(struct drm_mode_object *obj)
{
        if (obj->free_cb) {
                DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount));
                kref_put(&obj->refcount, obj->free_cb);
        }
}
EXPORT_SYMBOL(drm_mode_object_unreference);

/**
 * drm_mode_object_reference - incr the object refcnt
 * @obj: mode_object
 *
 * This function increments the object's refcount if it is a refcounted modeset
 * object. It is a no-op on any other object. References should be dropped again
 * by calling drm_mode_object_unreference().
 */
void drm_mode_object_reference(struct drm_mode_object *obj)
{
        if (obj->free_cb) {
                DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount));
                kref_get(&obj->refcount);
        }
}
EXPORT_SYMBOL(drm_mode_object_reference);

/**
 * drm_object_attach_property - attach a property to a modeset object
 * @obj: drm modeset object
 * @property: property to attach
 * @init_val: initial value of the property
 *
 * This attaches the given property to the modeset object with the given initial
 * value. Currently this function cannot fail since the properties are stored in
 * a statically sized array.
 */
void drm_object_attach_property(struct drm_mode_object *obj,
                                struct drm_property *property,
                                uint64_t init_val)
{
        int count = obj->properties->count;

        if (count == DRM_OBJECT_MAX_PROPERTY) {
                WARN(1, "Failed to attach object property (type: 0x%x). Please "
                        "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time "
                        "you see this message on the same object type.\n",
                        obj->type);
                return;
        }

        obj->properties->properties[count] = property;
        obj->properties->values[count] = init_val;
        obj->properties->count++;
}
EXPORT_SYMBOL(drm_object_attach_property);

/**
 * drm_object_property_set_value - set the value of a property
 * @obj: drm mode object to set property value for
 * @property: property to set
 * @val: value the property should be set to
 *
 * This function sets a given property on a given object. This function only
 * changes the software state of the property, it does not call into the
 * driver's ->set_property callback.
 *
 * Note that atomic drivers should not have any need to call this, the core will
 * ensure consistency of values reported back to userspace through the
 * appropriate ->atomic_get_property callback. Only legacy drivers should call
 * this function to update the tracked value (after clamping and other
 * restrictions have been applied).
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_object_property_set_value(struct drm_mode_object *obj,
                                  struct drm_property *property, uint64_t val)
{
        int i;

        for (i = 0; i < obj->properties->count; i++) {
                if (obj->properties->properties[i] == property) {
                        obj->properties->values[i] = val;
                        return 0;
                }
        }

        return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_set_value);

/**
 * drm_object_property_get_value - retrieve the value of a property
 * @obj: drm mode object to get property value from
 * @property: property to retrieve
 * @val: storage for the property value
 *
 * This function retrieves the softare state of the given property for the given
 * property. Since there is no driver callback to retrieve the current property
 * value this might be out of sync with the hardware, depending upon the driver
 * and property.
 *
 * Atomic drivers should never call this function directly, the core will read
 * out property values through the various ->atomic_get_property callbacks.
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_object_property_get_value(struct drm_mode_object *obj,
                                  struct drm_property *property, uint64_t *val)
{
        int i;

        /* read-only properties bypass atomic mechanism and still store
         * their value in obj->properties->values[].. mostly to avoid
         * having to deal w/ EDID and similar props in atomic paths:
         */
        if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) &&
                        !(property->flags & DRM_MODE_PROP_IMMUTABLE))
                return drm_atomic_get_property(obj, property, val);

        for (i = 0; i < obj->properties->count; i++) {
                if (obj->properties->properties[i] == property) {
                        *val = obj->properties->values[i];
                        return 0;
                }

        }

        return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_get_value);

/* helper for getconnector and getproperties ioctls */
int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
                                   uint32_t __user *prop_ptr,
                                   uint64_t __user *prop_values,
                                   uint32_t *arg_count_props)
{
        int i, ret, count;

        for (i = 0, count = 0; i < obj->properties->count; i++) {
                struct drm_property *prop = obj->properties->properties[i];
                uint64_t val;

                if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic)
                        continue;

                if (*arg_count_props > count) {
                        ret = drm_object_property_get_value(obj, prop, &val);
                        if (ret)
                                return ret;

                        if (put_user(prop->base.id, prop_ptr + count))
                                return -EFAULT;

                        if (put_user(val, prop_values + count))
                                return -EFAULT;
                }

                count++;
        }
        *arg_count_props = count;

        return 0;
}

/**
 * drm_mode_obj_get_properties_ioctl - get the current value of a object's property
 * @dev: DRM device
 * @data: ioctl data
 * @file_priv: DRM file info
 *
 * This function retrieves the current value for an object's property. Compared
 * to the connector specific ioctl this one is extended to also work on crtc and
 * plane objects.
 *
 * Called by the user via ioctl.
 *
 * Returns:
 * Zero on success, negative errno on failure.
 */
int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
                                      struct drm_file *file_priv)
{
        struct drm_mode_obj_get_properties *arg = data;
        struct drm_mode_object *obj;
        int ret = 0;

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                return -EINVAL;

        drm_modeset_lock_all(dev);

        obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
        if (!obj) {
                ret = -ENOENT;
                goto out;
        }
        if (!obj->properties) {
                ret = -EINVAL;
                goto out_unref;
        }

        ret = drm_mode_object_get_properties(obj, file_priv->atomic,
                        (uint32_t __user *)(unsigned long)(arg->props_ptr),
                        (uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
                        &arg->count_props);

out_unref:
        drm_mode_object_unreference(obj);
out:
        drm_modeset_unlock_all(dev);
        return ret;
}

struct drm_property *drm_mode_obj_find_prop_id(struct drm_mode_object *obj,
                                               uint32_t prop_id)
{
        int i;

        for (i = 0; i < obj->properties->count; i++)
                if (obj->properties->properties[i]->base.id == prop_id)
                        return obj->properties->properties[i];

        return NULL;
}

int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
                                    struct drm_file *file_priv)
{
        struct drm_mode_obj_set_property *arg = data;
        struct drm_mode_object *arg_obj;
        struct drm_property *property;
        int ret = -EINVAL;
        struct drm_mode_object *ref;

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                return -EINVAL;

        drm_modeset_lock_all(dev);

        arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
        if (!arg_obj) {
                ret = -ENOENT;
                goto out;
        }

        if (!arg_obj->properties)
                goto out_unref;

        property = drm_mode_obj_find_prop_id(arg_obj, arg->prop_id);
        if (!property)
                goto out_unref;

        if (!drm_property_change_valid_get(property, arg->value, &ref))
                goto out_unref;

        switch (arg_obj->type) {
        case DRM_MODE_OBJECT_CONNECTOR:
                ret = drm_mode_connector_set_obj_prop(arg_obj, property,
                                                      arg->value);
                break;
        case DRM_MODE_OBJECT_CRTC:
                ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value);
                break;
        case DRM_MODE_OBJECT_PLANE:
                ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj),
                                                  property, arg->value);
                break;
        }

        drm_property_change_valid_put(property, ref);

out_unref:
        drm_mode_object_unreference(arg_obj);
out:
        drm_modeset_unlock_all(dev);
        return ret;
}