2 * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/errno.h>
19 #include <asm/mach/irq.h>
21 #include <mach/hardware.h>
22 #include <mach/common.h>
25 *****************************************
27 *****************************************
30 #define TZIC_INTCNTL 0x0000 /* Control register */
31 #define TZIC_INTTYPE 0x0004 /* Controller Type register */
32 #define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
33 #define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
34 #define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
35 #define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
36 #define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
37 #define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
38 #define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
39 #define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
40 #define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
41 #define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
42 #define TZIC_PND0 0x0D00 /* Pending Register 0 */
43 #define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
44 #define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
45 #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
46 #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
48 void __iomem
*tzic_base
; /* Used as irq controller base in entry-macro.S */
51 * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
53 * @param irq interrupt source number
55 static void tzic_mask_irq(unsigned int irq
)
61 __raw_writel(1 << off
, tzic_base
+ TZIC_ENCLEAR0(index
));
65 * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
67 * @param irq interrupt source number
69 static void tzic_unmask_irq(unsigned int irq
)
75 __raw_writel(1 << off
, tzic_base
+ TZIC_ENSET0(index
));
78 static unsigned int wakeup_intr
[4];
81 * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
83 * @param irq interrupt source number
84 * @param enable enable as wake-up if equal to non-zero
85 * disble as wake-up if equal to zero
87 * @return This function returns 0 on success.
89 static int tzic_set_wake_irq(unsigned int irq
, unsigned int enable
)
91 unsigned int index
, off
;
100 wakeup_intr
[index
] |= (1 << off
);
102 wakeup_intr
[index
] &= ~(1 << off
);
107 static struct irq_chip mxc_tzic_chip
= {
109 .ack
= tzic_mask_irq
,
110 .mask
= tzic_mask_irq
,
111 .unmask
= tzic_unmask_irq
,
112 .set_wake
= tzic_set_wake_irq
,
116 * This function initializes the TZIC hardware and disables all the
117 * interrupts. It registers the interrupt enable and disable functions
118 * to the kernel for each interrupt source.
120 void __init
tzic_init_irq(void __iomem
*irqbase
)
125 /* put the TZIC into the reset value with
126 * all interrupts disabled
128 i
= __raw_readl(tzic_base
+ TZIC_INTCNTL
);
130 __raw_writel(0x80010001, tzic_base
+ TZIC_INTCNTL
);
131 __raw_writel(0x1f, tzic_base
+ TZIC_PRIOMASK
);
132 __raw_writel(0x02, tzic_base
+ TZIC_SYNCCTRL
);
134 for (i
= 0; i
< 4; i
++)
135 __raw_writel(0xFFFFFFFF, tzic_base
+ TZIC_INTSEC0(i
));
137 /* disable all interrupts */
138 for (i
= 0; i
< 4; i
++)
139 __raw_writel(0xFFFFFFFF, tzic_base
+ TZIC_ENCLEAR0(i
));
141 /* all IRQ no FIQ Warning :: No selection */
143 for (i
= 0; i
< MXC_INTERNAL_IRQS
; i
++) {
144 set_irq_chip(i
, &mxc_tzic_chip
);
145 set_irq_handler(i
, handle_level_irq
);
146 set_irq_flags(i
, IRQF_VALID
);
148 mxc_register_gpios();
150 pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
154 * tzic_enable_wake() - enable wakeup interrupt
156 * @param is_idle 1 if called in idle loop (ENSET0 register);
157 * 0 to be used when called from low power entry
158 * @return 0 if successful; non-zero otherwise
160 int tzic_enable_wake(int is_idle
)
164 __raw_writel(1, tzic_base
+ TZIC_DSMINT
);
165 if (unlikely(__raw_readl(tzic_base
+ TZIC_DSMINT
) == 0))
168 for (i
= 0; i
< 4; i
++) {
169 v
= is_idle
? __raw_readl(TZIC_ENSET0(i
)) : wakeup_intr
[i
];
170 __raw_writel(v
, TZIC_WAKEUP0(i
));