2 * PCMCIA 16-bit resource management functions
4 * The initial developer of the original code is David A. Hinds
5 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
6 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
8 * Copyright (C) 1999 David A. Hinds
9 * Copyright (C) 2004-2005 Dominik Brodowski
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/interrupt.h>
20 #include <linux/delay.h>
21 #include <linux/pci.h>
22 #include <linux/device.h>
23 #include <linux/netdevice.h>
24 #include <linux/slab.h>
28 #include <pcmcia/cs_types.h>
29 #include <pcmcia/ss.h>
30 #include <pcmcia/cs.h>
31 #include <pcmcia/cistpl.h>
32 #include <pcmcia/cisreg.h>
33 #include <pcmcia/ds.h>
35 #include "cs_internal.h"
38 /* Access speed for IO windows */
40 module_param(io_speed
, int, 0444);
43 int pcmcia_validate_mem(struct pcmcia_socket
*s
)
45 if (s
->resource_ops
->validate_mem
)
46 return s
->resource_ops
->validate_mem(s
);
47 /* if there is no callback, we can assume that everything is OK */
51 struct resource
*pcmcia_find_mem_region(u_long base
, u_long num
, u_long align
,
52 int low
, struct pcmcia_socket
*s
)
54 if (s
->resource_ops
->find_mem
)
55 return s
->resource_ops
->find_mem(base
, num
, align
, low
, s
);
62 * Special stuff for managing IO windows, because they are scarce
65 static int alloc_io_space(struct pcmcia_socket
*s
, u_int attr
,
66 unsigned int *base
, unsigned int num
, u_int lines
)
70 align
= (*base
) ? (lines
? 1<<lines
: 0) : 1;
71 if (align
&& (align
< num
)) {
73 dev_dbg(&s
->dev
, "odd IO request: num %#x align %#x\n",
77 while (align
&& (align
< num
))
80 if (*base
& ~(align
-1)) {
81 dev_dbg(&s
->dev
, "odd IO request: base %#x align %#x\n",
86 return s
->resource_ops
->find_io(s
, attr
, base
, num
, align
);
87 } /* alloc_io_space */
90 static void release_io_space(struct pcmcia_socket
*s
, unsigned int base
,
95 for (i
= 0; i
< MAX_IO_WIN
; i
++) {
98 if ((s
->io
[i
].res
->start
<= base
) &&
99 (s
->io
[i
].res
->end
>= base
+num
-1)) {
100 s
->io
[i
].InUse
-= num
;
101 /* Free the window if no one else is using it */
102 if (s
->io
[i
].InUse
== 0) {
103 release_resource(s
->io
[i
].res
);
109 } /* release_io_space */
112 /** pccard_access_configuration_register
114 * Access_configuration_register() reads and writes configuration
115 * registers in attribute memory. Memory window 0 is reserved for
116 * this and the tuple reading services.
119 int pcmcia_access_configuration_register(struct pcmcia_device
*p_dev
,
122 struct pcmcia_socket
*s
;
128 if (!p_dev
|| !p_dev
->function_config
)
133 mutex_lock(&s
->ops_mutex
);
134 c
= p_dev
->function_config
;
136 if (!(c
->state
& CONFIG_LOCKED
)) {
137 dev_dbg(&s
->dev
, "Configuration isnt't locked\n");
138 mutex_unlock(&s
->ops_mutex
);
142 addr
= (c
->ConfigBase
+ reg
->Offset
) >> 1;
144 switch (reg
->Action
) {
146 ret
= pcmcia_read_cis_mem(s
, 1, addr
, 1, &val
);
151 pcmcia_write_cis_mem(s
, 1, addr
, 1, &val
);
154 dev_dbg(&s
->dev
, "Invalid conf register request\n");
158 mutex_unlock(&s
->ops_mutex
);
160 } /* pcmcia_access_configuration_register */
161 EXPORT_SYMBOL(pcmcia_access_configuration_register
);
164 int pcmcia_map_mem_page(struct pcmcia_device
*p_dev
, window_handle_t wh
,
167 struct pcmcia_socket
*s
= p_dev
->socket
;
173 if (req
->Page
!= 0) {
174 dev_dbg(&s
->dev
, "failure: requested page is zero\n");
177 mutex_lock(&s
->ops_mutex
);
178 s
->win
[wh
].card_start
= req
->CardOffset
;
179 ret
= s
->ops
->set_mem_map(s
, &s
->win
[wh
]);
181 dev_warn(&s
->dev
, "failed to set_mem_map\n");
182 mutex_unlock(&s
->ops_mutex
);
184 } /* pcmcia_map_mem_page */
185 EXPORT_SYMBOL(pcmcia_map_mem_page
);
188 /** pcmcia_modify_configuration
190 * Modify a locked socket configuration
192 int pcmcia_modify_configuration(struct pcmcia_device
*p_dev
,
195 struct pcmcia_socket
*s
;
201 mutex_lock(&s
->ops_mutex
);
202 c
= p_dev
->function_config
;
204 if (!(s
->state
& SOCKET_PRESENT
)) {
205 dev_dbg(&s
->dev
, "No card present\n");
209 if (!(c
->state
& CONFIG_LOCKED
)) {
210 dev_dbg(&s
->dev
, "Configuration isnt't locked\n");
215 if (mod
->Attributes
& (CONF_IRQ_CHANGE_VALID
| CONF_VCC_CHANGE_VALID
)) {
217 "changing Vcc or IRQ is not allowed at this time\n");
222 /* We only allow changing Vpp1 and Vpp2 to the same value */
223 if ((mod
->Attributes
& CONF_VPP1_CHANGE_VALID
) &&
224 (mod
->Attributes
& CONF_VPP2_CHANGE_VALID
)) {
225 if (mod
->Vpp1
!= mod
->Vpp2
) {
226 dev_dbg(&s
->dev
, "Vpp1 and Vpp2 must be the same\n");
230 s
->socket
.Vpp
= mod
->Vpp1
;
231 if (s
->ops
->set_socket(s
, &s
->socket
)) {
232 dev_printk(KERN_WARNING
, &s
->dev
,
233 "Unable to set VPP\n");
237 } else if ((mod
->Attributes
& CONF_VPP1_CHANGE_VALID
) ||
238 (mod
->Attributes
& CONF_VPP2_CHANGE_VALID
)) {
239 dev_dbg(&s
->dev
, "changing Vcc is not allowed at this time\n");
244 if (mod
->Attributes
& CONF_IO_CHANGE_WIDTH
) {
245 pccard_io_map io_off
= { 0, 0, 0, 0, 1 };
249 io_on
.speed
= io_speed
;
250 for (i
= 0; i
< MAX_IO_WIN
; i
++) {
256 io_on
.flags
= MAP_ACTIVE
| IO_DATA_PATH_WIDTH_8
;
257 io_on
.start
= s
->io
[i
].res
->start
;
258 io_on
.stop
= s
->io
[i
].res
->end
;
260 s
->ops
->set_io_map(s
, &io_off
);
262 s
->ops
->set_io_map(s
, &io_on
);
267 mutex_unlock(&s
->ops_mutex
);
270 } /* modify_configuration */
271 EXPORT_SYMBOL(pcmcia_modify_configuration
);
274 int pcmcia_release_configuration(struct pcmcia_device
*p_dev
)
276 pccard_io_map io
= { 0, 0, 0, 0, 1 };
277 struct pcmcia_socket
*s
= p_dev
->socket
;
281 mutex_lock(&s
->ops_mutex
);
282 c
= p_dev
->function_config
;
283 if (p_dev
->_locked
) {
285 if (--(s
->lock_count
) == 0) {
286 s
->socket
.flags
= SS_OUTPUT_ENA
; /* Is this correct? */
288 s
->socket
.io_irq
= 0;
289 s
->ops
->set_socket(s
, &s
->socket
);
292 if (c
->state
& CONFIG_LOCKED
) {
293 c
->state
&= ~CONFIG_LOCKED
;
294 if (c
->state
& CONFIG_IO_REQ
)
295 for (i
= 0; i
< MAX_IO_WIN
; i
++) {
299 if (s
->io
[i
].Config
!= 0)
302 s
->ops
->set_io_map(s
, &io
);
305 mutex_unlock(&s
->ops_mutex
);
308 } /* pcmcia_release_configuration */
311 /** pcmcia_release_io
313 * Release_io() releases the I/O ranges allocated by a client. This
314 * may be invoked some time after a card ejection has already dumped
315 * the actual socket configuration, so if the client is "stale", we
316 * don't bother checking the port ranges against the current socket
319 static int pcmcia_release_io(struct pcmcia_device
*p_dev
, io_req_t
*req
)
321 struct pcmcia_socket
*s
= p_dev
->socket
;
325 mutex_lock(&s
->ops_mutex
);
326 c
= p_dev
->function_config
;
333 if ((c
->io
.BasePort1
!= req
->BasePort1
) ||
334 (c
->io
.NumPorts1
!= req
->NumPorts1
) ||
335 (c
->io
.BasePort2
!= req
->BasePort2
) ||
336 (c
->io
.NumPorts2
!= req
->NumPorts2
))
339 c
->state
&= ~CONFIG_IO_REQ
;
341 release_io_space(s
, req
->BasePort1
, req
->NumPorts1
);
343 release_io_space(s
, req
->BasePort2
, req
->NumPorts2
);
346 mutex_unlock(&s
->ops_mutex
);
349 } /* pcmcia_release_io */
352 int pcmcia_release_window(struct pcmcia_device
*p_dev
, window_handle_t wh
)
354 struct pcmcia_socket
*s
= p_dev
->socket
;
361 mutex_lock(&s
->ops_mutex
);
364 if (!(p_dev
->_win
& CLIENT_WIN_REQ(wh
))) {
365 dev_dbg(&s
->dev
, "not releasing unknown window\n");
366 mutex_unlock(&s
->ops_mutex
);
370 /* Shut down memory window */
371 win
->flags
&= ~MAP_ACTIVE
;
372 s
->ops
->set_mem_map(s
, win
);
373 s
->state
&= ~SOCKET_WIN_REQ(wh
);
375 /* Release system memory */
377 release_resource(win
->res
);
381 p_dev
->_win
&= ~CLIENT_WIN_REQ(wh
);
382 mutex_unlock(&s
->ops_mutex
);
385 } /* pcmcia_release_window */
386 EXPORT_SYMBOL(pcmcia_release_window
);
389 int pcmcia_request_configuration(struct pcmcia_device
*p_dev
,
394 struct pcmcia_socket
*s
= p_dev
->socket
;
398 if (!(s
->state
& SOCKET_PRESENT
))
401 if (req
->IntType
& INT_CARDBUS
) {
402 dev_dbg(&s
->dev
, "IntType may not be INT_CARDBUS\n");
406 mutex_lock(&s
->ops_mutex
);
407 c
= p_dev
->function_config
;
408 if (c
->state
& CONFIG_LOCKED
) {
409 mutex_unlock(&s
->ops_mutex
);
410 dev_dbg(&s
->dev
, "Configuration is locked\n");
414 /* Do power control. We don't allow changes in Vcc. */
415 s
->socket
.Vpp
= req
->Vpp
;
416 if (s
->ops
->set_socket(s
, &s
->socket
)) {
417 mutex_unlock(&s
->ops_mutex
);
418 dev_printk(KERN_WARNING
, &s
->dev
,
419 "Unable to set socket state\n");
423 /* Pick memory or I/O card, DMA mode, interrupt */
424 c
->IntType
= req
->IntType
;
425 c
->Attributes
= req
->Attributes
;
426 if (req
->IntType
& INT_MEMORY_AND_IO
)
427 s
->socket
.flags
|= SS_IOCARD
;
428 if (req
->IntType
& INT_ZOOMED_VIDEO
)
429 s
->socket
.flags
|= SS_ZVCARD
| SS_IOCARD
;
430 if (req
->Attributes
& CONF_ENABLE_DMA
)
431 s
->socket
.flags
|= SS_DMA_MODE
;
432 if (req
->Attributes
& CONF_ENABLE_SPKR
)
433 s
->socket
.flags
|= SS_SPKR_ENA
;
434 if (req
->Attributes
& CONF_ENABLE_IRQ
)
435 s
->socket
.io_irq
= s
->pcmcia_irq
;
437 s
->socket
.io_irq
= 0;
438 s
->ops
->set_socket(s
, &s
->socket
);
441 /* Set up CIS configuration registers */
442 base
= c
->ConfigBase
= req
->ConfigBase
;
443 c
->CardValues
= req
->Present
;
444 if (req
->Present
& PRESENT_COPY
) {
446 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_SCR
)>>1, 1, &c
->Copy
);
448 if (req
->Present
& PRESENT_OPTION
) {
449 if (s
->functions
== 1) {
450 c
->Option
= req
->ConfigIndex
& COR_CONFIG_MASK
;
452 c
->Option
= req
->ConfigIndex
& COR_MFC_CONFIG_MASK
;
453 c
->Option
|= COR_FUNC_ENA
|COR_IREQ_ENA
;
454 if (req
->Present
& PRESENT_IOBASE_0
)
455 c
->Option
|= COR_ADDR_DECODE
;
457 if ((req
->Attributes
& CONF_ENABLE_IRQ
) &&
458 !(req
->Attributes
& CONF_ENABLE_PULSE_IRQ
))
459 c
->Option
|= COR_LEVEL_REQ
;
460 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_COR
)>>1, 1, &c
->Option
);
463 if (req
->Present
& PRESENT_STATUS
) {
464 c
->Status
= req
->Status
;
465 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_CCSR
)>>1, 1, &c
->Status
);
467 if (req
->Present
& PRESENT_PIN_REPLACE
) {
469 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_PRR
)>>1, 1, &c
->Pin
);
471 if (req
->Present
& PRESENT_EXT_STATUS
) {
472 c
->ExtStatus
= req
->ExtStatus
;
473 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_ESR
)>>1, 1, &c
->ExtStatus
);
475 if (req
->Present
& PRESENT_IOBASE_0
) {
476 u_char b
= c
->io
.BasePort1
& 0xff;
477 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_IOBASE_0
)>>1, 1, &b
);
478 b
= (c
->io
.BasePort1
>> 8) & 0xff;
479 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_IOBASE_1
)>>1, 1, &b
);
481 if (req
->Present
& PRESENT_IOSIZE
) {
482 u_char b
= c
->io
.NumPorts1
+ c
->io
.NumPorts2
- 1;
483 pcmcia_write_cis_mem(s
, 1, (base
+ CISREG_IOSIZE
)>>1, 1, &b
);
486 /* Configure I/O windows */
487 if (c
->state
& CONFIG_IO_REQ
) {
488 iomap
.speed
= io_speed
;
489 for (i
= 0; i
< MAX_IO_WIN
; i
++)
492 iomap
.flags
= MAP_ACTIVE
;
493 switch (s
->io
[i
].res
->flags
& IO_DATA_PATH_WIDTH
) {
494 case IO_DATA_PATH_WIDTH_16
:
495 iomap
.flags
|= MAP_16BIT
; break;
496 case IO_DATA_PATH_WIDTH_AUTO
:
497 iomap
.flags
|= MAP_AUTOSZ
; break;
501 iomap
.start
= s
->io
[i
].res
->start
;
502 iomap
.stop
= s
->io
[i
].res
->end
;
503 s
->ops
->set_io_map(s
, &iomap
);
508 c
->state
|= CONFIG_LOCKED
;
510 mutex_unlock(&s
->ops_mutex
);
512 } /* pcmcia_request_configuration */
513 EXPORT_SYMBOL(pcmcia_request_configuration
);
516 /** pcmcia_request_io
518 * Request_io() reserves ranges of port addresses for a socket.
519 * I have not implemented range sharing or alias addressing.
521 int pcmcia_request_io(struct pcmcia_device
*p_dev
, io_req_t
*req
)
523 struct pcmcia_socket
*s
= p_dev
->socket
;
527 mutex_lock(&s
->ops_mutex
);
529 if (!(s
->state
& SOCKET_PRESENT
)) {
530 dev_dbg(&s
->dev
, "No card present\n");
537 c
= p_dev
->function_config
;
538 if (c
->state
& CONFIG_LOCKED
) {
539 dev_dbg(&s
->dev
, "Configuration is locked\n");
542 if (c
->state
& CONFIG_IO_REQ
) {
543 dev_dbg(&s
->dev
, "IO already configured\n");
546 if (req
->Attributes1
& (IO_SHARED
| IO_FORCE_ALIAS_ACCESS
)) {
547 dev_dbg(&s
->dev
, "bad attribute setting for IO region 1\n");
550 if ((req
->NumPorts2
> 0) &&
551 (req
->Attributes2
& (IO_SHARED
| IO_FORCE_ALIAS_ACCESS
))) {
552 dev_dbg(&s
->dev
, "bad attribute setting for IO region 2\n");
556 dev_dbg(&s
->dev
, "trying to allocate resource 1\n");
557 ret
= alloc_io_space(s
, req
->Attributes1
, &req
->BasePort1
,
558 req
->NumPorts1
, req
->IOAddrLines
);
560 dev_dbg(&s
->dev
, "allocation of resource 1 failed\n");
564 if (req
->NumPorts2
) {
565 dev_dbg(&s
->dev
, "trying to allocate resource 2\n");
566 ret
= alloc_io_space(s
, req
->Attributes2
, &req
->BasePort2
,
567 req
->NumPorts2
, req
->IOAddrLines
);
569 dev_dbg(&s
->dev
, "allocation of resource 2 failed\n");
570 release_io_space(s
, req
->BasePort1
, req
->NumPorts1
);
576 c
->state
|= CONFIG_IO_REQ
;
578 dev_dbg(&s
->dev
, "allocating resources succeeded: %d\n", ret
);
581 mutex_unlock(&s
->ops_mutex
);
584 } /* pcmcia_request_io */
585 EXPORT_SYMBOL(pcmcia_request_io
);
589 * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device
591 * pcmcia_request_irq() is a wrapper around request_irq which will allow
592 * the PCMCIA core to clean up the registration in pcmcia_disable_device().
593 * Drivers are free to use request_irq() directly, but then they need to
594 * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ
595 * handlers are allowed.
597 int __must_check
pcmcia_request_irq(struct pcmcia_device
*p_dev
,
598 irq_handler_t handler
)
605 ret
= request_irq(p_dev
->irq
, handler
, IRQF_SHARED
,
606 p_dev
->devname
, p_dev
->priv
);
612 EXPORT_SYMBOL(pcmcia_request_irq
);
616 * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first
618 * pcmcia_request_exclusive_irq() is a wrapper around request_irq which
619 * attempts first to request an exclusive IRQ. If it fails, it also accepts
620 * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for
621 * IRQ sharing and either use request_irq directly (then they need to call
622 * free_irq themselves, too), or the pcmcia_request_irq() function.
625 __pcmcia_request_exclusive_irq(struct pcmcia_device
*p_dev
,
626 irq_handler_t handler
)
633 ret
= request_irq(p_dev
->irq
, handler
, 0, p_dev
->devname
, p_dev
->priv
);
635 ret
= pcmcia_request_irq(p_dev
, handler
);
636 dev_printk(KERN_WARNING
, &p_dev
->dev
, "pcmcia: "
637 "request for exclusive IRQ could not be fulfilled.\n");
638 dev_printk(KERN_WARNING
, &p_dev
->dev
, "pcmcia: the driver "
639 "needs updating to supported shared IRQ lines.\n");
642 dev_printk(KERN_INFO
, &p_dev
->dev
, "request_irq() failed\n");
647 } /* pcmcia_request_exclusive_irq */
648 EXPORT_SYMBOL(__pcmcia_request_exclusive_irq
);
651 #ifdef CONFIG_PCMCIA_PROBE
653 /* mask of IRQs already reserved by other cards, we should avoid using them */
654 static u8 pcmcia_used_irq
[NR_IRQS
];
656 static irqreturn_t
test_action(int cpl
, void *dev_id
)
662 * pcmcia_setup_isa_irq() - determine whether an ISA IRQ can be used
663 * @p_dev - the associated PCMCIA device
665 * locking note: must be called with ops_mutex locked.
667 static int pcmcia_setup_isa_irq(struct pcmcia_device
*p_dev
, int type
)
669 struct pcmcia_socket
*s
= p_dev
->socket
;
670 unsigned int try, irq
;
671 u32 mask
= s
->irq_mask
;
674 for (try = 0; try < 64; try++) {
677 /* marked as available by driver, not blocked by userspace? */
678 if (!((mask
>> irq
) & 1))
681 /* avoid an IRQ which is already used by another PCMCIA card */
682 if ((try < 32) && pcmcia_used_irq
[irq
])
685 /* register the correct driver, if possible, to check whether
686 * registering a dummy handle works, i.e. if the IRQ isn't
687 * marked as used by the kernel resource management core */
688 ret
= request_irq(irq
, test_action
, type
, p_dev
->devname
,
691 free_irq(irq
, p_dev
);
692 p_dev
->irq
= s
->pcmcia_irq
= irq
;
693 pcmcia_used_irq
[irq
]++;
701 void pcmcia_cleanup_irq(struct pcmcia_socket
*s
)
703 pcmcia_used_irq
[s
->pcmcia_irq
]--;
707 #else /* CONFIG_PCMCIA_PROBE */
709 static int pcmcia_setup_isa_irq(struct pcmcia_device
*p_dev
, int type
)
714 void pcmcia_cleanup_irq(struct pcmcia_socket
*s
)
720 #endif /* CONFIG_PCMCIA_PROBE */
724 * pcmcia_setup_irq() - determine IRQ to be used for device
725 * @p_dev - the associated PCMCIA device
727 * locking note: must be called with ops_mutex locked.
729 int pcmcia_setup_irq(struct pcmcia_device
*p_dev
)
731 struct pcmcia_socket
*s
= p_dev
->socket
;
736 /* already assigned? */
738 p_dev
->irq
= s
->pcmcia_irq
;
742 /* prefer an exclusive ISA irq */
743 if (!pcmcia_setup_isa_irq(p_dev
, 0))
746 /* but accept a shared ISA irq */
747 if (!pcmcia_setup_isa_irq(p_dev
, IRQF_SHARED
))
750 /* but use the PCI irq otherwise */
752 p_dev
->irq
= s
->pcmcia_irq
= s
->pci_irq
;
760 /** pcmcia_request_window
762 * Request_window() establishes a mapping between card memory space
763 * and system memory space.
765 int pcmcia_request_window(struct pcmcia_device
*p_dev
, win_req_t
*req
, window_handle_t
*wh
)
767 struct pcmcia_socket
*s
= p_dev
->socket
;
772 if (!(s
->state
& SOCKET_PRESENT
)) {
773 dev_dbg(&s
->dev
, "No card present\n");
776 if (req
->Attributes
& (WIN_PAGED
| WIN_SHARED
)) {
777 dev_dbg(&s
->dev
, "bad attribute setting for iomem region\n");
781 /* Window size defaults to smallest available */
783 req
->Size
= s
->map_size
;
784 align
= (((s
->features
& SS_CAP_MEM_ALIGN
) ||
785 (req
->Attributes
& WIN_STRICT_ALIGN
)) ?
786 req
->Size
: s
->map_size
);
787 if (req
->Size
& (s
->map_size
-1)) {
788 dev_dbg(&s
->dev
, "invalid map size\n");
791 if ((req
->Base
&& (s
->features
& SS_CAP_STATIC_MAP
)) ||
792 (req
->Base
& (align
-1))) {
793 dev_dbg(&s
->dev
, "invalid base address\n");
799 /* Allocate system memory window */
800 for (w
= 0; w
< MAX_WIN
; w
++)
801 if (!(s
->state
& SOCKET_WIN_REQ(w
)))
804 dev_dbg(&s
->dev
, "all windows are used already\n");
808 mutex_lock(&s
->ops_mutex
);
811 if (!(s
->features
& SS_CAP_STATIC_MAP
)) {
812 win
->res
= pcmcia_find_mem_region(req
->Base
, req
->Size
, align
,
813 (req
->Attributes
& WIN_MAP_BELOW_1MB
), s
);
815 dev_dbg(&s
->dev
, "allocating mem region failed\n");
816 mutex_unlock(&s
->ops_mutex
);
820 p_dev
->_win
|= CLIENT_WIN_REQ(w
);
822 /* Configure the socket controller */
825 win
->speed
= req
->AccessSpeed
;
826 if (req
->Attributes
& WIN_MEMORY_TYPE
)
827 win
->flags
|= MAP_ATTRIB
;
828 if (req
->Attributes
& WIN_ENABLE
)
829 win
->flags
|= MAP_ACTIVE
;
830 if (req
->Attributes
& WIN_DATA_WIDTH_16
)
831 win
->flags
|= MAP_16BIT
;
832 if (req
->Attributes
& WIN_USE_WAIT
)
833 win
->flags
|= MAP_USE_WAIT
;
836 if (s
->ops
->set_mem_map(s
, win
) != 0) {
837 dev_dbg(&s
->dev
, "failed to set memory mapping\n");
838 mutex_unlock(&s
->ops_mutex
);
841 s
->state
|= SOCKET_WIN_REQ(w
);
843 /* Return window handle */
844 if (s
->features
& SS_CAP_STATIC_MAP
)
845 req
->Base
= win
->static_start
;
847 req
->Base
= win
->res
->start
;
849 mutex_unlock(&s
->ops_mutex
);
853 } /* pcmcia_request_window */
854 EXPORT_SYMBOL(pcmcia_request_window
);
856 void pcmcia_disable_device(struct pcmcia_device
*p_dev
)
858 pcmcia_release_configuration(p_dev
);
859 pcmcia_release_io(p_dev
, &p_dev
->io
);
861 free_irq(p_dev
->irq
, p_dev
->priv
);
863 pcmcia_release_window(p_dev
, p_dev
->win
);
865 EXPORT_SYMBOL(pcmcia_disable_device
);