wl1251: use wiphy_dev instead of wl->spi->dev
[linux/fpc-iii.git] / arch / arm / mach-netx / time.c
blob82801dbf0579a024cb7a5df294db3105eaf1a464
1 /*
2 * arch/arm/mach-netx/time.c
4 * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #include <linux/init.h>
21 #include <linux/interrupt.h>
22 #include <linux/irq.h>
23 #include <linux/clocksource.h>
24 #include <linux/clockchips.h>
25 #include <linux/io.h>
27 #include <mach/hardware.h>
28 #include <asm/mach/time.h>
29 #include <mach/netx-regs.h>
31 #define TIMER_CLOCKEVENT 0
32 #define TIMER_CLOCKSOURCE 1
34 static void netx_set_mode(enum clock_event_mode mode,
35 struct clock_event_device *clk)
37 u32 tmode;
39 /* disable timer */
40 writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
42 switch (mode) {
43 case CLOCK_EVT_MODE_PERIODIC:
44 writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
45 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
46 NETX_GPIO_COUNTER_CTRL_IRQ_EN |
47 NETX_GPIO_COUNTER_CTRL_RUN;
48 break;
50 case CLOCK_EVT_MODE_ONESHOT:
51 writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
52 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
53 NETX_GPIO_COUNTER_CTRL_RUN;
54 break;
56 default:
57 WARN(1, "%s: unhandled mode %d\n", __func__, mode);
58 /* fall through */
60 case CLOCK_EVT_MODE_SHUTDOWN:
61 case CLOCK_EVT_MODE_UNUSED:
62 case CLOCK_EVT_MODE_RESUME:
63 tmode = 0;
64 break;
67 writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
70 static int netx_set_next_event(unsigned long evt,
71 struct clock_event_device *clk)
73 writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
74 return 0;
77 static struct clock_event_device netx_clockevent = {
78 .name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
79 .shift = 32,
80 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
81 .set_next_event = netx_set_next_event,
82 .set_mode = netx_set_mode,
86 * IRQ handler for the timer
88 static irqreturn_t
89 netx_timer_interrupt(int irq, void *dev_id)
91 struct clock_event_device *evt = &netx_clockevent;
93 /* acknowledge interrupt */
94 writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
96 evt->event_handler(evt);
98 return IRQ_HANDLED;
101 static struct irqaction netx_timer_irq = {
102 .name = "NetX Timer Tick",
103 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
104 .handler = netx_timer_interrupt,
107 cycle_t netx_get_cycles(struct clocksource *cs)
109 return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
112 static struct clocksource clocksource_netx = {
113 .name = "netx_timer",
114 .rating = 200,
115 .read = netx_get_cycles,
116 .mask = CLOCKSOURCE_MASK(32),
117 .shift = 20,
118 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
122 * Set up timer interrupt
124 static void __init netx_timer_init(void)
126 /* disable timer initially */
127 writel(0, NETX_GPIO_COUNTER_CTRL(0));
129 /* Reset the timer value to zero */
130 writel(0, NETX_GPIO_COUNTER_CURRENT(0));
132 writel(LATCH, NETX_GPIO_COUNTER_MAX(0));
134 /* acknowledge interrupt */
135 writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
137 /* Enable the interrupt in the specific timer
138 * register and start timer
140 writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
141 writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
142 NETX_GPIO_COUNTER_CTRL(0));
144 setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
146 /* Setup timer one for clocksource */
147 writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
148 writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
149 writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
151 writel(NETX_GPIO_COUNTER_CTRL_RUN,
152 NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
154 clocksource_netx.mult =
155 clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
156 clocksource_register(&clocksource_netx);
158 netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
159 netx_clockevent.shift);
160 netx_clockevent.max_delta_ns =
161 clockevent_delta2ns(0xfffffffe, &netx_clockevent);
162 /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
163 * Adding some safety ... */
164 netx_clockevent.min_delta_ns =
165 clockevent_delta2ns(0xa00, &netx_clockevent);
166 netx_clockevent.cpumask = cpumask_of(0);
167 clockevents_register_device(&netx_clockevent);
170 struct sys_timer netx_timer = {
171 .init = netx_timer_init,