KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE

[linux/fpc-iii.git] / drivers / watchdog / sbsa_gwdt.c

/*
 * SBSA(Server Base System Architecture) Generic Watchdog driver
 *
 * Copyright (c) 2015, Linaro Ltd.
 * Author: Fu Wei <fu.wei@linaro.org>
 *         Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
 *         Al Stone <al.stone@linaro.org>
 *         Timur Tabi <timur@codeaurora.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License 2 as published
 * by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * ARM SBSA Generic Watchdog has two stage timeouts:
 * the first signal (WS0) is for alerting the system by interrupt,
 * the second one (WS1) is a real hardware reset.
 * More details about the hardware specification of this device:
 * ARM DEN0029B - Server Base System Architecture (SBSA)
 *
 * This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog
 * or a two stages watchdog, it's set up by the module parameter "action".
 * In the single stage mode, when the timeout is reached, your system
 * will be reset by WS1. The first signal (WS0) is ignored.
 * In the two stages mode, when the timeout is reached, the first signal (WS0)
 * will trigger panic. If the system is getting into trouble and cannot be reset
 * by panic or restart properly by the kdump kernel(if supported), then the
 * second stage (as long as the first stage) will be reached, system will be
 * reset by WS1. This function can help administrator to backup the system
 * context info by panic console output or kdump.
 *
 * SBSA GWDT:
 * if action is 1 (the two stages mode):
 * |--------WOR-------WS0--------WOR-------WS1
 * |----timeout-----(panic)----timeout-----reset
 *
 * if action is 0 (the single stage mode):
 * |------WOR-----WS0(ignored)-----WOR------WS1
 * |--------------timeout-------------------reset
 *
 * Note: Since this watchdog timer has two stages, and each stage is determined
 * by WOR, in the single stage mode, the timeout is (WOR * 2); in the two
 * stages mode, the timeout is WOR. The maximum timeout in the two stages mode
 * is half of that in the single stage mode.
 *
 */

#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
#include <asm/arch_timer.h>

#define DRV_NAME                "sbsa-gwdt"
#define WATCHDOG_NAME           "SBSA Generic Watchdog"

/* SBSA Generic Watchdog register definitions */
/* refresh frame */
#define SBSA_GWDT_WRR           0x000

/* control frame */
#define SBSA_GWDT_WCS           0x000
#define SBSA_GWDT_WOR           0x008
#define SBSA_GWDT_WCV           0x010

/* refresh/control frame */
#define SBSA_GWDT_W_IIDR        0xfcc
#define SBSA_GWDT_IDR           0xfd0

/* Watchdog Control and Status Register */
#define SBSA_GWDT_WCS_EN        BIT(0)
#define SBSA_GWDT_WCS_WS0       BIT(1)
#define SBSA_GWDT_WCS_WS1       BIT(2)

/**
 * struct sbsa_gwdt - Internal representation of the SBSA GWDT
 * @wdd:                kernel watchdog_device structure
 * @clk:                store the System Counter clock frequency, in Hz.
 * @refresh_base:       Virtual address of the watchdog refresh frame
 * @control_base:       Virtual address of the watchdog control frame
 */
struct sbsa_gwdt {
        struct watchdog_device  wdd;
        u32                     clk;
        void __iomem            *refresh_base;
        void __iomem            *control_base;
};

#define DEFAULT_TIMEOUT         10 /* seconds */

static unsigned int timeout;
module_param(timeout, uint, 0);
MODULE_PARM_DESC(timeout,
                 "Watchdog timeout in seconds. (>=0, default="
                 __MODULE_STRING(DEFAULT_TIMEOUT) ")");

/*
 * action refers to action taken when watchdog gets WS0
 * 0 = skip
 * 1 = panic
 * defaults to skip (0)
 */
static int action;
module_param(action, int, 0);
MODULE_PARM_DESC(action, "after watchdog gets WS0 interrupt, do: "
                 "0 = skip(*)  1 = panic");

static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, S_IRUGO);
MODULE_PARM_DESC(nowayout,
                 "Watchdog cannot be stopped once started (default="
                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

/*
 * watchdog operation functions
 */
static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
                                 unsigned int timeout)
{
        struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);

        wdd->timeout = timeout;

        if (action)
                writel(gwdt->clk * timeout,
                       gwdt->control_base + SBSA_GWDT_WOR);
        else
                /*
                 * In the single stage mode, The first signal (WS0) is ignored,
                 * the timeout is (WOR * 2), so the WOR should be configured
                 * to half value of timeout.
                 */
                writel(gwdt->clk / 2 * timeout,
                       gwdt->control_base + SBSA_GWDT_WOR);

        return 0;
}

static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd)
{
        struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
        u64 timeleft = 0;

        /*
         * In the single stage mode, if WS0 is deasserted
         * (watchdog is in the first stage),
         * timeleft = WOR + (WCV - system counter)
         */
        if (!action &&
            !(readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0))
                timeleft += readl(gwdt->control_base + SBSA_GWDT_WOR);

        timeleft += readq(gwdt->control_base + SBSA_GWDT_WCV) -
                    arch_counter_get_cntvct();

        do_div(timeleft, gwdt->clk);

        return timeleft;
}

static int sbsa_gwdt_keepalive(struct watchdog_device *wdd)
{
        struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);

        /*
         * Writing WRR for an explicit watchdog refresh.
         * You can write anyting (like 0).
         */
        writel(0, gwdt->refresh_base + SBSA_GWDT_WRR);

        return 0;
}

static int sbsa_gwdt_start(struct watchdog_device *wdd)
{
        struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);

        /* writing WCS will cause an explicit watchdog refresh */
        writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS);

        return 0;
}

static int sbsa_gwdt_stop(struct watchdog_device *wdd)
{
        struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);

        /* Simply write 0 to WCS to clean WCS_EN bit */
        writel(0, gwdt->control_base + SBSA_GWDT_WCS);

        return 0;
}

static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id)
{
        panic(WATCHDOG_NAME " timeout");

        return IRQ_HANDLED;
}

static const struct watchdog_info sbsa_gwdt_info = {
        .identity       = WATCHDOG_NAME,
        .options        = WDIOF_SETTIMEOUT |
                          WDIOF_KEEPALIVEPING |
                          WDIOF_MAGICCLOSE |
                          WDIOF_CARDRESET,
};

static const struct watchdog_ops sbsa_gwdt_ops = {
        .owner          = THIS_MODULE,
        .start          = sbsa_gwdt_start,
        .stop           = sbsa_gwdt_stop,
        .ping           = sbsa_gwdt_keepalive,
        .set_timeout    = sbsa_gwdt_set_timeout,
        .get_timeleft   = sbsa_gwdt_get_timeleft,
};

static int sbsa_gwdt_probe(struct platform_device *pdev)
{
        void __iomem *rf_base, *cf_base;
        struct device *dev = &pdev->dev;
        struct watchdog_device *wdd;
        struct sbsa_gwdt *gwdt;
        struct resource *res;
        int ret, irq;
        u32 status;

        gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
        if (!gwdt)
                return -ENOMEM;
        platform_set_drvdata(pdev, gwdt);

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        cf_base = devm_ioremap_resource(dev, res);
        if (IS_ERR(cf_base))
                return PTR_ERR(cf_base);

        res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
        rf_base = devm_ioremap_resource(dev, res);
        if (IS_ERR(rf_base))
                return PTR_ERR(rf_base);

        /*
         * Get the frequency of system counter from the cp15 interface of ARM
         * Generic timer. We don't need to check it, because if it returns "0",
         * system would panic in very early stage.
         */
        gwdt->clk = arch_timer_get_cntfrq();
        gwdt->refresh_base = rf_base;
        gwdt->control_base = cf_base;

        wdd = &gwdt->wdd;
        wdd->parent = dev;
        wdd->info = &sbsa_gwdt_info;
        wdd->ops = &sbsa_gwdt_ops;
        wdd->min_timeout = 1;
        wdd->max_hw_heartbeat_ms = U32_MAX / gwdt->clk * 1000;
        wdd->timeout = DEFAULT_TIMEOUT;
        watchdog_set_drvdata(wdd, gwdt);
        watchdog_set_nowayout(wdd, nowayout);

        status = readl(cf_base + SBSA_GWDT_WCS);
        if (status & SBSA_GWDT_WCS_WS1) {
                dev_warn(dev, "System reset by WDT.\n");
                wdd->bootstatus |= WDIOF_CARDRESET;
        }
        if (status & SBSA_GWDT_WCS_EN)
                set_bit(WDOG_HW_RUNNING, &wdd->status);

        if (action) {
                irq = platform_get_irq(pdev, 0);
                if (irq < 0) {
                        action = 0;
                        dev_warn(dev, "unable to get ws0 interrupt.\n");
                } else {
                        /*
                         * In case there is a pending ws0 interrupt, just ping
                         * the watchdog before registering the interrupt routine
                         */
                        writel(0, rf_base + SBSA_GWDT_WRR);
                        if (devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0,
                                             pdev->name, gwdt)) {
                                action = 0;
                                dev_warn(dev, "unable to request IRQ %d.\n",
                                         irq);
                        }
                }
                if (!action)
                        dev_warn(dev, "falling back to single stage mode.\n");
        }
        /*
         * In the single stage mode, The first signal (WS0) is ignored,
         * the timeout is (WOR * 2), so the maximum timeout should be doubled.
         */
        if (!action)
                wdd->max_hw_heartbeat_ms *= 2;

        watchdog_init_timeout(wdd, timeout, dev);
        /*
         * Update timeout to WOR.
         * Because of the explicit watchdog refresh mechanism,
         * it's also a ping, if watchdog is enabled.
         */
        sbsa_gwdt_set_timeout(wdd, wdd->timeout);

        ret = watchdog_register_device(wdd);
        if (ret)
                return ret;

        dev_info(dev, "Initialized with %ds timeout @ %u Hz, action=%d.%s\n",
                 wdd->timeout, gwdt->clk, action,
                 status & SBSA_GWDT_WCS_EN ? " [enabled]" : "");

        return 0;
}

static void sbsa_gwdt_shutdown(struct platform_device *pdev)
{
        struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);

        sbsa_gwdt_stop(&gwdt->wdd);
}

static int sbsa_gwdt_remove(struct platform_device *pdev)
{
        struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);

        watchdog_unregister_device(&gwdt->wdd);

        return 0;
}

/* Disable watchdog if it is active during suspend */
static int __maybe_unused sbsa_gwdt_suspend(struct device *dev)
{
        struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);

        if (watchdog_active(&gwdt->wdd))
                sbsa_gwdt_stop(&gwdt->wdd);

        return 0;
}

/* Enable watchdog if necessary */
static int __maybe_unused sbsa_gwdt_resume(struct device *dev)
{
        struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);

        if (watchdog_active(&gwdt->wdd))
                sbsa_gwdt_start(&gwdt->wdd);

        return 0;
}

static const struct dev_pm_ops sbsa_gwdt_pm_ops = {
        SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume)
};

static const struct of_device_id sbsa_gwdt_of_match[] = {
        { .compatible = "arm,sbsa-gwdt", },
        {},
};
MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match);

static const struct platform_device_id sbsa_gwdt_pdev_match[] = {
        { .name = DRV_NAME, },
        {},
};
MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match);

static struct platform_driver sbsa_gwdt_driver = {
        .driver = {
                .name = DRV_NAME,
                .pm = &sbsa_gwdt_pm_ops,
                .of_match_table = sbsa_gwdt_of_match,
        },
        .probe = sbsa_gwdt_probe,
        .remove = sbsa_gwdt_remove,
        .shutdown = sbsa_gwdt_shutdown,
        .id_table = sbsa_gwdt_pdev_match,
};

module_platform_driver(sbsa_gwdt_driver);

MODULE_DESCRIPTION("SBSA Generic Watchdog Driver");
MODULE_AUTHOR("Fu Wei <fu.wei@linaro.org>");
MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>");
MODULE_AUTHOR("Al Stone <al.stone@linaro.org>");
MODULE_AUTHOR("Timur Tabi <timur@codeaurora.org>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRV_NAME);